Hewlett Packard Enterprise ProLiant DL385 Gen11 | SPECpower_ssj2008 = 22,881 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Oct 25, 2022 |
Hardware Availability: | Dec-2022 | Software Availability: | Dec-2022 | Publication: | Nov 10, 2022 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.4% | 20,119,490 | 679 | 29,645 |
90% | 90.0% | 18,217,362 | 645 | 28,239 |
80% | 80.0% | 16,187,806 | 599 | 27,015 |
70% | 70.1% | 14,174,274 | 532 | 26,621 |
60% | 60.0% | 12,132,438 | 486 | 24,989 |
50% | 50.0% | 10,119,279 | 446 | 22,707 |
40% | 40.0% | 8,098,007 | 406 | 19,963 |
30% | 30.0% | 6,071,780 | 363 | 16,734 |
20% | 20.0% | 4,043,355 | 317 | 12,758 |
10% | 10.0% | 2,022,186 | 266 | 7,601 |
Active Idle | 0 | 121 | 0 | |
∑ssj_ops / ∑power = | 22,881 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL385 Gen11 |
Form Factor: | 2U |
CPU Name: | AMD EPYC 9654 2.40 GHz |
CPU Characteristics: | 96-Core, 2.40 GHz, 384MB L3 Cache |
CPU Frequency (MHz): | 2400 |
CPU(s) Enabled: | 192 cores, 2 chips, 96 cores/chip |
Hardware Threads: | 384 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 1 MB I+D on chip per core |
Tertiary Cache: | 384 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 384 |
# and size of DIMM: | 24 x 16384 MB |
Memory Details: | 16 GB 1Rx8 PC5-4800B-R; all DIMM slots populated on each socket |
Power Supply Quantity and Rating (W): | 1 x 1000 |
Power Supply Details: | HPE 1000W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (P03178-B21) |
Disk Drive: | 1 x HPE 480GB SATA 6G Read Intensive SFF BC Multi Vendor SSD (P40497-B21) |
Disk Controller: | Embedded SATA Controller |
# and type of Network Interface Cards (NICs) Installed: | 1 x HPE 1GbE 4p BASE-T I350-T4 OCP3 Adapter (P08449-B21) |
NICs Enabled in Firmware / OS / Connected: | 4/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | Windows Server 2019 Datacenter |
OS Version: | Version 1809 (OS Build 17763.3532) |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Java HotSpot(TM) 64-Bit Server VM (build 17.0.2+8-LTS-86, mixed mode, sharing) |
JVM Command-line Options: | -server -Xms1500m -Xmx1500m -Xmn1300m -XX:+UseParallelGC -XX:ParallelGCThreads=2 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:+UseBiasedLocking -XX:InlineSmallCode=1500 -XX:UseAVX=1 -XX:AutoBoxCacheMax=20000 -XX:+OptimizeFill -XX:+AggressiveHeap |
JVM Affinity: | start /NODE [0-23] /AFFINITY [0xF,0xF0,0xF00,0xF000] |
JVM Instances: | 96 |
JVM Initial Heap (MB): | 1500 |
JVM Maximum Heap (MB): | 1500 |
JVM Address Bits: | 64 |
Boot Firmware Version: | A55 v1.10 (10/14/2022) |
Management Firmware Version: | 1.10 Oct 09 2022 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | KB5018419, HPE ProLiant Agentless Management Service for Windows X64 |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 Gen9 |
CPU Description: | 2x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Windows Server 2012 R2 |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_241-b07 (build 25.241-b07, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT210 |
Serial Number: | 91GB53024 |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-GU3Q4-100-1 |
Date of Calibration: | 14-Jun-2022 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.9.2-3976349f-20201208 |
Setup Description: | SUT Power Supply 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 679 | 20.6 |
90% | 645 | 21.3 |
80% | 599 | 22.1 |
70% | 532 | 21.5 |
60% | 486 | 22.6 |
50% | 446 | 23.7 |
40% | 406 | 23.5 |
30% | 363 | 24.0 |
20% | 317 | 24.6 |
10% | 266 | 24.0 |
Active Idle | 121 | 24.1 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 20.6 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 20,846,553 | ||
Calibration 2 | 20,248,456 | ||
Calibration 3 | 20,218,713 | ||
ssj_ops@calibrated=20,233,584 | |||
100% | 99.4% | 20,233,584 | 20,119,490 |
90% | 90.0% | 18,210,226 | 18,217,362 |
80% | 80.0% | 16,186,867 | 16,187,806 |
70% | 70.1% | 14,163,509 | 14,174,274 |
60% | 60.0% | 12,140,151 | 12,132,438 |
50% | 50.0% | 10,116,792 | 10,119,279 |
40% | 40.0% | 8,093,434 | 8,098,007 |
30% | 30.0% | 6,070,075 | 6,071,780 |
20% | 20.0% | 4,046,717 | 4,043,355 |
10% | 10.0% | 2,023,358 | 2,022,186 |
Active Idle | 0 | 0 |