Hewlett Packard Enterprise ProLiant Compute DL380a Gen12 | SPECpower_ssj2008 = 23,276 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | Feb 4, 2025 |
Hardware Availability: | Mar-2025 | Software Availability: | Oct-2024 | Publication: | Feb 25, 2025 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.8% | 23,060,637 | 941 | 24,515 |
90% | 90.1% | 20,823,905 | 876 | 23,771 |
80% | 80.0% | 18,497,398 | 715 | 25,884 |
70% | 70.0% | 16,189,328 | 567 | 28,546 |
60% | 60.0% | 13,864,317 | 488 | 28,397 |
50% | 50.0% | 11,557,574 | 427 | 27,052 |
40% | 40.0% | 9,240,754 | 377 | 24,497 |
30% | 30.0% | 6,933,801 | 334 | 20,732 |
20% | 20.0% | 4,622,176 | 287 | 16,083 |
10% | 10.0% | 2,311,881 | 243 | 9,526 |
Active Idle | 0 | 205 | 0 | |
∑ssj_ops / ∑power = | 23,276 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant Compute DL380a Gen12 |
Form Factor: | 4U |
CPU Name: | Intel Xeon 6787P Processor 2.0 GHz |
CPU Characteristics: | 86 core, 2.0 GHz, 336 MB L3 Cache |
CPU Frequency (MHz): | 2000 |
CPU(s) Enabled: | 172 cores, 2 chips, 86 cores/chip |
Hardware Threads: | 344 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 48 KB D on chip per core |
Secondary Cache: | 2 MB I+D on chip per core |
Tertiary Cache: | 336 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 256 |
# and size of DIMM: | 16 x 16384 MB |
Memory Details: | 16 GB 1Rx8 PC5-6400B-R; slots 1, 3, 5, 7, 10, 12, 14 & 16 on each socket |
Power Supply Quantity and Rating (W): | 1 x 2400 |
Power Supply Details: | HPE 2400W M-CRPS Titanium Hot Plug Power Supply Kit 96% ( P67252-B21) |
Disk Drive: | HPE 1.6tb Nvme High Performance Mixed Use Sff Sc U.3 Tlc Ssd |
Disk Controller: | Embedded SATA |
# and type of Network Interface Cards (NICs) Installed: | 1 x BCM 5719 1Gb 4p BASE-T OCP Adptr (P51178-B21) |
NICs Enabled in Firmware / OS / Connected: | 4/4/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | SUSE Linux Enterprise Server 15 SP6 |
OS Version: | 6.4.0-150600.21-default |
Filesystem: | XFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 17.0.13+10-LTS-268, mixed mode) |
JVM Command-line Options: | -server -Xms1500m -Xmx1500m -Xmn1300m -XX:+UseBiasedLocking -XX:+UseParallelGC -XX:ParallelGCThreads=2 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:InlineSmallCode=1500 -XX:UseAVX=1 -XX:AutoBoxCacheMax=20000 -XX:+OptimizeFill -XX:+AggressiveHeap -XX:FreqInlineSize=2500 -XX:CompileThresholdScaling=210 |
JVM Affinity: | numactl -C $((physicalCoreId + 0)),$((physicalCoreId + 1)),$((physicalCoreId + 172)),$((physicalCoreId + 173)) |
JVM Instances: | 86 |
JVM Initial Heap (MB): | 1500 |
JVM Maximum Heap (MB): | 1500 |
JVM Address Bits: | 64 |
Boot Firmware Version: | U72 v1.20 (02/04/2025) |
Management Firmware Version: | 1.01.00 Jan 01 2025 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | HPE ProLiant Agentless Management Service for SUSE LINUX Enterprise Server 15 |
BIOS Platform Configuration (RBSU):
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 Gen9 |
CPU Description: | 2x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Windows Server 2019 |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_241-b07 (build 25.241-b07, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT210 |
Serial Number: | 91K218964 |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-H16YM-120-1 |
Date of Calibration: | 06-Jun-2024 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.11.1-462c978e-20240907 |
Setup Description: | SUT Power Supply 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 941 | 24.4 |
90% | 876 | 24.5 |
80% | 715 | 24.6 |
70% | 567 | 24.6 |
60% | 488 | 24.7 |
50% | 427 | 24.7 |
40% | 377 | 24.7 |
30% | 334 | 24.8 |
20% | 287 | 24.8 |
10% | 243 | 24.7 |
Active Idle | 205 | 24.6 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 24.4 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 16,813,867 | ||
Calibration 2 | 23,103,013 | ||
Calibration 3 | 23,128,588 | ||
ssj_ops@calibrated=23,115,800 | |||
100% | 99.8% | 23,115,800 | 23,060,637 |
90% | 90.1% | 20,804,220 | 20,823,905 |
80% | 80.0% | 18,492,640 | 18,497,398 |
70% | 70.0% | 16,181,060 | 16,189,328 |
60% | 60.0% | 13,869,480 | 13,864,317 |
50% | 50.0% | 11,557,900 | 11,557,574 |
40% | 40.0% | 9,246,320 | 9,240,754 |
30% | 30.0% | 6,934,740 | 6,933,801 |
20% | 20.0% | 4,623,160 | 4,622,176 |
10% | 10.0% | 2,311,580 | 2,311,881 |
Active Idle | 0 | 0 |