Hewlett Packard Enterprise ProLiant DL380 Gen10 Plus | SPECpower_ssj2008 = 11,735 overall ssj_ops/watt | ||||
Test Sponsor: | Hewlett Packard Enterprise | SPEC License #: | 3 | Test Method: | Single Node |
Tested By: | Hewlett Packard Enterprise | Test Location: | Houston, TX, USA | Test Date: | May 31, 2021 |
Hardware Availability: | May-2021 | Software Availability: | Apr-2021 | Publication: | Jun 30, 2021 |
System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
Performance | Power | Performance to Power Ratio | ||
---|---|---|---|---|
Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
100% | 99.8% | 8,125,401 | 619 | 13,122 |
90% | 90.0% | 7,329,022 | 576 | 12,731 |
80% | 80.1% | 6,521,541 | 464 | 14,058 |
70% | 70.1% | 5,709,919 | 405 | 14,087 |
60% | 60.0% | 4,884,337 | 354 | 13,802 |
50% | 50.0% | 4,076,051 | 314 | 12,984 |
40% | 40.0% | 3,257,608 | 281 | 11,608 |
30% | 30.1% | 2,448,696 | 253 | 9,661 |
20% | 20.0% | 1,625,704 | 226 | 7,195 |
10% | 10.0% | 811,409 | 198 | 4,107 |
Active Idle | 0 | 127 | 0 | |
∑ssj_ops / ∑power = | 11,735 |
Set Identifier: | SUT |
Set Description: | System Under Test |
# of Identical Nodes: | 1 |
Comment: | SUT |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL380 Gen10 Plus |
Form Factor: | 2U |
CPU Name: | Intel Xeon Platinum 8380 2.30 GHz |
CPU Characteristics: | 40 core, 2.30 GHz, 60 MB L3 Cache |
CPU Frequency (MHz): | 2300 |
CPU(s) Enabled: | 80 cores, 2 chips, 40 cores/chip |
Hardware Threads: | 160 (2 / core) |
CPU(s) Orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 48 KB D on chip per core |
Secondary Cache: | 1280 KB I+D on chip per core |
Tertiary Cache: | 60 MB I+D on chip per chip |
Other Cache: | None |
Memory Amount (GB): | 256 |
# and size of DIMM: | 16 x 16384 MB |
Memory Details: | 16GB 2Rx8 PC4-3200-T; slots 1, 3, 5, 7, 10, 12, 14 & 16 on each socket (P06031-B21) |
Power Supply Quantity and Rating (W): | 1 x 800 |
Power Supply Details: | HPE 800W (96%) Flex Slot Titanium Hot Plug Power Supply Kit (865438-B21) |
Disk Drive: | HPE 480GB SATA 6G SSD (P40502-B21) |
Disk Controller: | Embedded SATA |
# and type of Network Interface Cards (NICs) Installed: | 1 x Intel Ethernet Adapter I350T4 OCPv3 |
NICs Enabled in Firmware / OS / Connected: | 4/1/1 |
Network Speed (Mbit): | 1000 |
Keyboard: | None |
Mouse: | None |
Monitor: | None |
Optical Drives: | No |
Other Hardware: | None |
Software | |
---|---|
Power Management: | Enabled (see SUT Notes) |
Operating System (OS): | Windows Server 2019 Datacenter |
OS Version: | Version 1809 (Build 17763.1697) |
Filesystem: | NTFS |
JVM Vendor: | Oracle Corporation |
JVM Version: | Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.11+9-LTS-194, mixed mode) |
JVM Command-line Options: | -server -Xmn1700m -Xms1950m -Xmx1950m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=2 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:UseAVX=0 -XX:-UseAdaptiveSizePolicy -XX:-ThreadLocalHandshakes |
JVM Affinity: | start /NODE [0,1,2,3] /AFFINITY [3,C,30,C0,300,C00,3000,C000,30000,C0000,300000,C00000,3000000,C000000,30000000,C0000000,300000000,C00000000,3000000000,C000000000] |
JVM Instances: | 80 |
JVM Initial Heap (MB): | 1950 |
JVM Maximum Heap (MB): | 1950 |
JVM Address Bits: | 64 |
Boot Firmware Version: | U46 v1.42 (05/16/2021) |
Management Firmware Version: | 2.42 Apr 05 2021 |
Workload Version: | SSJ 1.2.10 |
Director Location: | Controller |
Other Software: | KB4598230 |
Hardware | |
---|---|
Hardware Vendor: | Hewlett Packard Enterprise |
Model: | ProLiant DL360 Gen9 |
CPU Description: | 2 x Intel Xeon E5-2660 v3 |
Memory amount (GB): | 128 |
Software | |
---|---|
Operating System (OS): | Windows Server 2012 R2 |
JVM Vendor: | Oracle Corporation |
JVM Version: | 1.8.0_221-b11 (build 25.221-b11, mixed mode) |
CCS Version: | 1.2.6 |
Power Analyzer pwr1 | |
---|---|
Hardware Vendor: | Yokogawa |
Model: | WT310 |
Serial Number: | C2QM22002V |
Connectivity: | GPIB vi NI GPIB-USB-HS |
Input Connection: | Default |
Metrology Institute: | NIST |
Accredited by: | TRANSCAT |
Calibration Label: | 5-FQ7PK-100-1 |
Date of Calibration: | 16-Jun-2020 |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
PTDaemon Version: | 1.9.2-3976349f-20201208 |
Setup Description: | SUT Power Supplies 1 |
Temperature Sensor temp1 | |
---|---|
Hardware Vendor: | Digi International Inc. |
Model: | Watchport/H |
Driver Version: | 5.70.105.0 |
Connectivity: | USB |
PTDaemon Host System: | same as CCS |
PTDaemon Host OS: | same as CCS |
Setup Description: | 5 mm in front of SUT main intake |
Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
---|---|---|
100% | 619 | 25.8 |
90% | 576 | 25.9 |
80% | 464 | 26.1 |
70% | 405 | 26.1 |
60% | 354 | 26.0 |
50% | 314 | 26.0 |
40% | 281 | 26.0 |
30% | 253 | 26.0 |
20% | 226 | 25.9 |
10% | 198 | 25.8 |
Active Idle | 127 | 25.8 |
Line Standard | Minimum Temperature (°C) | Elevation (m) |
---|---|---|
208V / 60 Hz / 1 phase / 2 wires | 25.8 | 132 |
Target Load | Actual Load | ssj_ops | |
---|---|---|---|
Target | Actual | ||
Calibration 1 | 8,139,096 | ||
Calibration 2 | 8,135,518 | ||
Calibration 3 | 8,155,465 | ||
ssj_ops@calibrated=8,145,492 | |||
100% | 99.8% | 8,145,492 | 8,125,401 |
90% | 90.0% | 7,330,942 | 7,329,022 |
80% | 80.1% | 6,516,393 | 6,521,541 |
70% | 70.1% | 5,701,844 | 5,709,919 |
60% | 60.0% | 4,887,295 | 4,884,337 |
50% | 50.0% | 4,072,746 | 4,076,051 |
40% | 40.0% | 3,258,197 | 3,257,608 |
30% | 30.1% | 2,443,647 | 2,448,696 |
20% | 20.0% | 1,629,098 | 1,625,704 |
10% | 10.0% | 814,549 | 811,409 |
Active Idle | 0 | 0 |