SPECpower_ssj2008
Copyright © 2007-2011 Standard Performance Evaluation Corporation
| Fujitsu PRIMERGY TX120 S3 (Intel Xeon E3-1260L) | SPECpower_ssj2008 = 4,697 overall ssj_ops/watt | ||||
| Test Sponsor: | Fujitsu | SPEC License #: | 19 | Test Method: | Single Node |
| Tested By: | Fujitsu | Test Location: | Paderborn, NRW, Germany | Test Date: | May 23, 2011 |
| Hardware Availability: | Jun-2011 | Software Availability: | Apr-2011 | Publication: | Jun 16, 2011 |
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 100.2% | 322,691 | 54.0 | 5,973 |
| 90% | 90.0% | 289,871 | 50.2 | 5,770 |
| 80% | 79.8% | 256,741 | 45.0 | 5,702 |
| 70% | 70.1% | 225,777 | 40.8 | 5,534 |
| 60% | 59.7% | 192,228 | 36.7 | 5,244 |
| 50% | 50.4% | 162,091 | 33.7 | 4,814 |
| 40% | 40.0% | 128,657 | 30.5 | 4,214 |
| 30% | 29.8% | 95,977 | 27.3 | 3,515 |
| 20% | 20.0% | 64,434 | 23.9 | 2,694 |
| 10% | 10.0% | 32,215 | 19.9 | 1,617 |
| Active Idle | 0 | 14.9 | 0 | |
| ∑ssj_ops / ∑power = | 4,697 | |||
| Set Identifier: | TX120 S3 |
| Set Description: | System Under Test |
| # of Identical Nodes: | 1 |
| Comment: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu |
| Model: | PRIMERGY TX120 S3 (Intel Xeon E3-1260L) |
| Form Factor: | Tower |
| CPU Name: | Intel Xeon E3-1260L |
| CPU Characteristics: | Quad-Core, 2.40GHz, 8MB L3 Cache |
| CPU Frequency (MHz): | 2400 |
| CPU(s) Enabled: | 4 cores, 1 chip, 4 cores/chip |
| Hardware Threads: | 8 (2 / core) |
| CPU(s) Orderable: | 1 chip |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 256 KB I+D on chip per core |
| Tertiary Cache: | 8 MB I+D on chip per chip |
| Other Cache: | None |
| Memory Amount (GB): | 8 |
| # and size of DIMM: | 2 x 4096 MB |
| Memory Details: | 4GB 2Rx8 PC3L-10600E ECC CL9; slots 1A, 1B populated |
| Power Supply Quantity and Rating (W): | 1 x 250 |
| Power Supply Details: | Fujitsu Technology Solutions S26113-E565-V70-01 |
| Disk Drive: | 1 x Intel 64GB, SSD, 2.5" SATA (Fujitsu S26361-F3298-E64) |
| Disk Controller: | Integrated SATA Controller |
| # and type of Network Interface Cards (NICs) Installed: | 1 x Intel 82574L and 1 x Intel 82579LM Gigabit Network Connection (onboard) |
| NICs Enabled in Firmware / OS / Connected: | 1/1/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | None |
| Mouse: | None |
| Monitor: | None |
| Optical Drives: | No |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Enabled ("Fujitsu Enhanced Power Settings" power plan) |
| Operating System (OS): | Microsoft Windows Server 2008 R2 Enterprise with SP1 |
| OS Version: | Version 6.1.7601 Service Pack 1 Build 7601 |
| Filesystem: | NTFS |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM on Windows, version 1.6.0_25 |
| JVM Command-line Options: | -server -Xmx6g -Xms6g -Xmn5g -XX:SurvivorRatio=55 -XX:TargetSurvivorRatio=90 -XX:ParallelGCThreads=8 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+UseCompressedStrings -XX:+AggressiveOpts |
| JVM Affinity: | None |
| JVM Instances: | 1 |
| JVM Initial Heap (MB): | 6144 |
| JVM Maximum Heap (MB): | 6144 |
| JVM Address Bits: | 64 |
| Boot Firmware Version: | 1.2 |
| Management Firmware Version: | 6.19A |
| Workload Version: | SSJ 1.2.6 |
| Director Location: | Controller |
| Other Software: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu |
| Model: | PRIMERGY RX100 S3 |
| CPU Description: | Pentium D 950 |
| Memory amount (GB): | 2 |
| Software | |
|---|---|
| Operating System (OS): | Windows Server 2003 Enterprise Edition + SP1 |
| JVM Vendor: | Oracle Corporation |
| JVM Version: | Oracle JRockit(R) R27.6.0 (build R27.6.0-50_o-100423-1.6.0_05-20080626-2105-windows-ia32) |
| CCS Version: | 1.2.4 |
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Yokogawa |
| Model: | WT210 |
| Serial Number: | 91HA48097 |
| Connectivity: | RS-232 |
| Input Connection: | Default (20A) |
| Calibration Institute: | PTB (Physikalisch Technische Bundesanstalt) |
| Accredited by: | Kalibrierdienst Stenger |
| Calibration Label: | 10119075 |
| Date of Calibration: | 16-Nov-2010 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.4.0-7071d9e7 |
| Setup Description: | SUT Power Supply 1 |
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | Watchport Virtual Port 5.10.26.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Setup Description: | 5 mm in front of SUT main air intake |
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) |
|---|---|---|
| 100% | 54.0 | 20.5 |
| 90% | 50.2 | 20.6 |
| 80% | 45.0 | 20.6 |
| 70% | 40.8 | 20.6 |
| 60% | 36.7 | 20.6 |
| 50% | 33.7 | 20.5 |
| 40% | 30.5 | 20.6 |
| 30% | 27.3 | 20.6 |
| 20% | 23.9 | 20.6 |
| 10% | 19.9 | 20.6 |
| Active Idle | 14.9 | 20.6 |
| Line Standard | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|
| 230V / 50 Hz / 1 phase / 2 wires | 20.5 | 117 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 326,718 | ||
| Calibration 2 | 321,937 | ||
| Calibration 3 | 321,884 | ||
| ssj_ops@calibrated=321,910 | |||
| 100% | 100.2% | 321,910 | 322,691 |
| 90% | 90.0% | 289,719 | 289,871 |
| 80% | 79.8% | 257,528 | 256,741 |
| 70% | 70.1% | 225,337 | 225,777 |
| 60% | 59.7% | 193,146 | 192,228 |
| 50% | 50.4% | 160,955 | 162,091 |
| 40% | 40.0% | 128,764 | 128,657 |
| 30% | 29.8% | 96,573 | 95,977 |
| 20% | 20.0% | 64,382 | 64,434 |
| 10% | 10.0% | 32,191 | 32,215 |
| Active Idle | 0 | 0 | |
