Hewlett-Packard Company ProLiant ML110 G3 (Historical) SPECpower_ssj2008 = 190 overall ssj_ops/watt
Test Sponsor: Intel Corp. SPEC License #: 3184 Test Method: Single Node
Tested By: Principled Technologies, Inc. Test Location: Durham, NC, USA Test Date: Jan 21, 2011
Hardware Availability: Feb-2006 Software Availability: May-2009 Publication: Feb 23, 2011
System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered
Benchmark Results Summary
Performance Power Performance to Power Ratio
Target Load Actual Load ssj_ops Average Active Power (W)
100% 99.4% 52,303 169 309
90% 88.9% 46,820 164 285
80% 80.0% 42,111 157 268
70% 69.9% 36,786 153 241
60% 60.9% 32,041 147 218
50% 49.9% 26,287 137 191
40% 39.7% 20,925 131 160
30% 30.5% 16,060 125 128
20% 20.1% 10,574 118 89.4
10% 10.2% 5,350 112 47.9
Active Idle 0 105 0
∑ssj_ops / ∑power = 190
Graph of results
System Under Test
Set: 'sut'
Set Identifier: sut
Set Description: ProLiant ML110 G3
# of Identical Nodes: 1
Comment: None
Hardware
Hardware Vendor: Hewlett-Packard Company
Model: ProLiant ML110 G3 (Historical)
Form Factor: Tower
CPU Name: Intel Pentium D Processor 930
CPU Characteristics: Dual-Core, 3.00 GHz, 4 MB L2 Cache, 800 MHz system bus
CPU Frequency (MHz): 3000
CPU(s) Enabled: 2 cores, 1 chip, 2 cores/chip
Hardware Threads: 2 (1 / core)
CPU(s) Orderable: 1 chip
Primary Cache: 16 K micro-ops I + 16 KB D on chip per chip
Secondary Cache: 4 MB I+D on chip per chip
Tertiary Cache: None
Other Cache: None
Memory Amount (GB): 4
# and size of DIMM: 4 x 1024 MB
Memory Details: 1GB 2Rx8 PC2-4200E; all slots populated
Power Supply Quantity and Rating (W): 1 x 350
Power Supply Details: HP part #381868-002
Disk Drive: 2 x 160GB 7.2K RPM SATA RAID 1
Disk Controller: Integrated SATA controller with embedded RAID
# and type of Network Interface Cards (NICs) Installed: 1 x NC105i Gigabit Server Adapter
NICs Enabled in Firmware / OS / Connected: 1/1/1
Network Speed (Mbit): 1000
Keyboard: KVM
Mouse: KVM
Monitor: KVM
Optical Drives: Yes
Other Hardware: None
Software
Power Management: Enabled (see SUT Notes)
Operating System (OS): Microsoft Windows Server 2003, Enterprise x64 Edition
OS Version: SP2, Build 3790
Filesystem: NTFS
JVM Vendor: Oracle Corporation
JVM Version: Oracle JRockit(R)(build P28.0.0-29-114096-1.6.0_11-20090427-1759-windows-x86_64, compiled mode)
JVM Command-line Options: -Xms3000m -Xmx3000m -Xns2400m -XXaggressive -XXlargePages -XXthroughputCompaction -XXcallprofiling -XXlazyUnlocking -Xgc:genpar -XXgcthreads:2 -XXtlasize:min=12k,preferred=1024k
JVM Affinity: None
JVM Instances: 1
JVM Initial Heap (MB): 3000
JVM Maximum Heap (MB): 3000
JVM Address Bits: 64
Boot Firmware Version: CPQO6 2006.08.17
Management Firmware Version: None
Workload Version: SSJ 1.2.6
Director Location: Controller
Other Software: None
Boot Firmware Settings
Hardware Prefetcher disabled in BIOS, Adjacent Cache Line Prefetch disabled in BIOS
Management Firmware Settings
None
System Under Test Notes
Controller System
Hardware
Hardware Vendor: Super Micro Computer, Inc.
Model: Supermicro 6025W-NTR+V
CPU Description: Intel Xeon Processor E5472
Memory amount (GB): 16
Software
Operating System (OS): Microsoft Windows Server 2003, Enterprise Edition, Service Pack 2
JVM Vendor: BEA Systems, Inc.
JVM Version: BEA JRockit(R) (build R27.5.0-110_o-99226-1.5.0_14-20080528-1505-windows-ia32, compiled mode)
CCS Version: 1.2.4
Measurement Devices
Power Analyzer pwr1
Hardware Vendor: Yokogawa Electric International Pte. Ltd.
Model: WT210
Serial Number: 91GB45373
Connectivity: RS-232
Input Connection: Default
Calibration Institute: NIST
Accredited by: Davis Calibration
Calibration Label: 07-1673
Date of Calibration: 28-Jul-2010
PTDaemon Host System: same as CCS
PTDaemon Host OS: same as CCS
PTDaemon Version: 1.4.0-7071d9e7
Setup Description: SUT Power Supply
Temperature Sensor temp1
Hardware Vendor: Digi International Inc.
Model: Watchport/H
Driver Version: 5.10.26.0
Connectivity: USB
PTDaemon Host System: same as CCS
PTDaemon Host OS: same as CCS
Setup Description: 50 mm in front of SUT main air intake
Notes
Used USB-to-Serial converter, Model Sabrent SBT-USC1M (driver version 2.0.2.1), to connect power analyzer to the controller.

This benchmark result is intended to provide perspective on past power and/or performance using the historical hardware and/or software described on this result page.

The system as described on this result page was formerly generally available. At the time of this publication, it may not be shipping, and/or may not be supported, and/or may fail to meet other tests of General Availability described in the SPEC OSG Policy document, http://www.spec.org/osg/policy.html

This measured result may not be representative of the result that would be measured were this benchmark run with hardware and software available as of the publication date.

Aggregate Electrical and Environmental Data
Target Load Average Active Power (W) Minimum Ambient Temperature (°C)
100% 169 24.6
90% 164 24.7
80% 157 24.8
70% 153 24.7
60% 147 24.8
50% 137 24.8
40% 131 24.6
30% 125 24.6
20% 118 24.3
10% 112 24.3
Active Idle 105 24.1
Line Standard Minimum Temperature (°C) Elevation (m)
120V / 60 Hz / 1 phase / 2 wires 24.1 132
See the Power/Temperature Details Report for additional details.
Aggregate Performance Data
Target Load Actual Load ssj_ops
Target Actual
Calibration 1     52,316
Calibration 2     52,364
Calibration 3     52,925
ssj_ops@calibrated=52,645
100% 99.4% 52,645 52,303
90% 88.9% 47,380 46,820
80% 80.0% 42,116 42,111
70% 69.9% 36,851 36,786
60% 60.9% 31,587 32,041
50% 49.9% 26,322 26,287
40% 39.7% 21,058 20,925
30% 30.5% 15,793 16,060
20% 20.1% 10,529 10,574
10% 10.2% 5,264 5,350
Active Idle   0 0
Graph of results
See the JVM Instance Performance Report for additional details.