Hewlett-Packard Company ProLiant DL580 G3 SPECpower_ssj2008 = 61.1 overall ssj_ops/watt
Test Sponsor: Intel Corp. SPEC License #: 3184 Test Method: Single Node
Tested By: Principled Technologies, Inc. Test Location: Durham, NC, USA Test Date: Jan 21, 2011
Hardware Availability: Nov-2005 Software Availability: May-2009 Publication: Feb 17, 2011
System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered
Benchmark Results Summary
Performance Power Performance to Power Ratio
Target Load Actual Load ssj_ops Average Active Power (W)
100% 100.1% 86,082 833 103
90% 91.0% 78,279 818 95.7
80% 80.5% 69,226 803 86.2
70% 69.9% 60,124 787 76.4
60% 59.1% 50,869 766 66.4
50% 49.8% 42,849 740 57.9
40% 40.8% 35,118 705 49.8
30% 30.0% 25,826 646 40.0
20% 19.8% 17,042 587 29.0
10% 10.0% 8,586 551 15.6
Active Idle 0 520 0
∑ssj_ops / ∑power = 61.1
Graph of results
System Under Test
Set: 'sut'
Set Identifier: sut
Set Description: ProLiant DL580 G3
# of Identical Nodes: 1
Comment: None
Hardware
Hardware Vendor: Hewlett-Packard Company
Model: ProLiant DL580 G3
Form Factor: 4U
CPU Name: Intel Xeon Processor 7020
CPU Characteristics: Dual-Core, 2.66 GHz, 2 MB L2 Cache, 667 MHz system bus
CPU Frequency (MHz): 2660
CPU(s) Enabled: 8 cores, 4 chips, 2 cores/chip
Hardware Threads: 16 (2 / core)
CPU(s) Orderable: 4 chips
Primary Cache: 16 KB I + 16 KB D on chip per core
Secondary Cache: 2 MB I+D on chip per chip
Tertiary Cache: None
Other Cache: None
Memory Amount (GB): 16
# and size of DIMM: 16 x 1024 MB
Memory Details: 1GB 1Rx4 PC2-3200R; all slots populated
Power Supply Quantity and Rating (W): 2 x 1300
Power Supply Details: HP part #337867-001
Disk Drive: 2 x 146.8GB 15K RPM Ultra 320 SCSI
Disk Controller: HP Ultra320 Smart Array 6i Controller with 64MB RAM
# and type of Network Interface Cards (NICs) Installed: 2 x NC7782 PCI-X Gigabit Server Adapter
NICs Enabled in Firmware / OS / Connected: 2/2/1
Network Speed (Mbit): 1000
Keyboard: KVM
Mouse: KVM
Monitor: KVM
Optical Drives: Yes
Other Hardware: None
Software
Power Management: Enabled (see SUT Notes)
Operating System (OS): Microsoft Windows Server 2003 R2, Enterprise x64 Edition
OS Version: SP2, Build 3790
Filesystem: NTFS
JVM Vendor: Oracle Corporation
JVM Version: Oracle JRockit(R) (build P28.0.0-29-114096-1.6.0_11-20090427-1759-windows-x86_64, compiled mode)
JVM Command-line Options: -Xms3700m -Xmx3700m -Xns3100m -XXaggressive -XXlargePages -XXthroughputCompaction -XXcallprofiling -XXlazyUnlocking -Xgc:genpar -XXgcthreads:2 -XXtlasize:min=12k,preferred=1024k
JVM Affinity: start /affinity [F, F0, F00, F000]
JVM Instances: 4
JVM Initial Heap (MB): 3700
JVM Maximum Heap (MB): 3700
JVM Address Bits: 64
Boot Firmware Version: P38 2007.08.02
Management Firmware Version: 1.94 03/19/2009
Workload Version: SSJ 1.2.6
Director Location: Controller
Other Software: None
Boot Firmware Settings
Hardware Prefetcher disabled in BIOS, Adjacent Cache Line Prefetch disabled in BIOS, HP Dynamic Power Mode Enabled in BIOS
Management Firmware Settings
Default
System Under Test Notes
Controller System
Hardware
Hardware Vendor: Super Micro Computer, Inc.
Model: Supermicro 6025W-NTR+V
CPU Description: Intel Xeon Processor E5472
Memory amount (GB): 16
Software
Operating System (OS): Microsoft Windows Server 2003, Enterprise Edition, Service Pack 2
JVM Vendor: BEA Systems, Inc.
JVM Version: BEA JRockit(R) (build R27.5.0-110_o-99226-1.5.0_14-20080528-1505-windows-ia32, compiled mode)
CCS Version: 1.2.4
Measurement Devices
Power Analyzer pwr1
Hardware Vendor: Yokogawa Electric International Pte. Ltd.
Model: WT210
Serial Number: 91GB45373
Connectivity: RS-232
Input Connection: Default
Calibration Institute: NIST
Accredited by: Davis Calibration
Calibration Label: 07-1673
Date of Calibration: 28-Jul-2010
PTDaemon Host System: same as CCS
PTDaemon Host OS: same as CCS
PTDaemon Version: 1.4.0-7071d9e7
Setup Description: SUT Power Supply
Temperature Sensor temp1
Hardware Vendor: Digi International Inc.
Model: Watchport/H
Driver Version: 5.10.26.0
Connectivity: USB
PTDaemon Host System: same as CCS
PTDaemon Host OS: same as CCS
Setup Description: 50 mm in front of SUT main air intake
Notes
Used USB-to-Serial converter, Model Sabrent SBT-USC1M (driver version 2.0.2.1), to connect power analyzer to the controller.

This benchmark result is intended to provide perspective on past power and/or performance using the historical hardware and/or software described on this result page.

The system as described on this result page was formerly generally available. At the time of this publication, it may not be shipping, and/or may not be supported, and/or may fail to meet other tests of General Availability described in the SPEC OSG Policy document, http://www.spec.org/osg/policy.html

This measured result may not be representative of the result that would be measured were this benchmark run with hardware and software available as of the publication date.

Aggregate Electrical and Environmental Data
Target Load Average Active Power (W) Minimum Ambient Temperature (°C)
100% 833 20.5
90% 818 20.2
80% 803 20.4
70% 787 20.4
60% 766 20.3
50% 740 20.6
40% 705 20.3
30% 646 20.4
20% 587 20.2
10% 551 20.3
Active Idle 520 20.3
Line Standard Minimum Temperature (°C) Elevation (m)
208V / 60 Hz / 1 phase / 2 wires 20.2 132
See the Power/Temperature Details Report for additional details.
Aggregate Performance Data
Target Load Actual Load ssj_ops
Target Actual
Calibration 1     82,837
Calibration 2     86,234
Calibration 3     85,823
ssj_ops@calibrated=86,028
100% 100.1% 86,028 86,082
90% 91.0% 77,426 78,279
80% 80.5% 68,823 69,226
70% 69.9% 60,220 60,124
60% 59.1% 51,617 50,869
50% 49.8% 43,014 42,849
40% 40.8% 34,411 35,118
30% 30.0% 25,809 25,826
20% 19.8% 17,206 17,042
10% 10.0% 8,603 8,586
Active Idle   0 0
Graph of results
See the Host Performance Report for additional details.