SPECpower_ssj2008 Copyright (C) 2007-2023 Standard Performance Evaluation Corporation Hewlett Packard Enterprise ProLiant DL325 Gen11 SPECpower_ssj2008 = 27,270 overall ssj_ops/watt Test Sponsor: Hewlett Packard Enterprise SPEC License #: 3 Tested By: Hewlett Packard Enterprise Test Location: Houston, TX, USA Test Date: May 19, 2023 Publication: Jun 13, 2023 Hardware Availability: Jul-2023 Software Availability: Jul-2023 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.3% | 13,582,425 | 431 | 31,495 90% | 88.7% | 12,121,615 | 383 | 31,658 80% | 79.9% | 10,925,084 | 356 | 30,697 70% | 70.0% | 9,568,408 | 291 | 32,918 60% | 60.0% | 8,203,384 | 262 | 31,305 50% | 50.0% | 6,831,862 | 240 | 28,512 40% | 39.9% | 5,461,738 | 217 | 25,191 30% | 29.9% | 4,093,517 | 193 | 21,181 20% | 20.0% | 2,738,572 | 167 | 16,425 10% | 10.0% | 1,363,002 | 136 | 9,998 Active Idle | 0 | 70.7 | 0 sum of ssj_ops / sum of power = | 27,270 System Under Test Set: 'SUT' Set Identifier: SUT Set Description: System Under Test # of Identical Nodes: 1 Comment: SUT HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL325 Gen11 Form Factor: 1U CPU Name: AMD EPYC 9754 2.25 GHz CPU Characteristics: 128-Core, 2.25 GHz, 256MB L3 Cache CPU Frequency (MHz): 2250 CPU(s) Enabled: 128 cores, 1 chip, 128 cores/chip Hardware Threads: 256 (2 / core) CPU(s) Orderable: 1 chip Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per core Tertiary Cache: 256 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 192 # and size of DIMM: 12 x 16384 MB Memory Details: 16 GB 1Rx8 PC5-4800B-R; all slots populated Power Supply Quantity and Rating 1 x 1000 (W): Power Supply Details: HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit (P03178-B21) Disk Drive: 1 x HPE 480GB SATA 6G Read Intensive SFF BC Multi Vendor SSD (P40497-B21) Disk Controller: Embedded SATA Controller # and type of Network Interface 1 x HPE 1GbE 4p BASE-T I350-T4 OCP3 Adapter Cards (NICs) Installed: (P08449-B21) NICs Enabled in Firmware / OS / 4/4/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): SUSE Linux Enterprise Server 15 SP4 OS Version: 5.14.21-150400.22-default Filesystem: xfs JVM Vendor: Oracle Corporation JVM Version: Java HotSpot(TM) 64-Bit Server VM (build 17.0.2+8-LTS-86, mixed mode, sharing) JVM Command-line Options: -server -Xms1500m -Xmx1500m -Xmn1300m -XX:+UseParallelGC -XX:ParallelGCThreads=2 -XX:+UseLargePages -XX:LargePageSizeInBytes=2m -XX:+UseBiasedLocking -XX:InlineSmallCode=1500 -XX:UseAVX=1 -XX:AutoBoxCacheMax=20000 -XX:+OptimizeFill -XX:+AggressiveHeap JVM Affinity: for each even physicalCoreId { numactl -C physicalCoreId, physicalCoreId + 1, physicalCoreId + 256, physicalCoreId + 257 } JVM Instances: 64 JVM Initial Heap (MB): 1500 JVM Maximum Heap (MB): 1500 JVM Address Bits: 64 Boot Firmware Version: A56 v1.34 (04/06/2023) Management Firmware Version: 1.30 Feb 28 2023 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: HPE ProLiant Agentless Management Service for SUSE LINUX Enterprise Server 15 Boot Firmware Settings BIOS Platform Configuration (RBSU): * BIOS Serial Console Port: Disabled * Determinism Control: Manual * Performance Determinism : Performance Deterministic * Maximum Memory Bus Frequency: 4000 MHz * Memory Patrol Scrubbing : Disabled * DRAM Controller Power Down: Enabled * NUMA memory domains per socket: Four memory domains per socket * Last-Level Cache (LLC) As NUMA Node: Enabled * SR-IOV: Disabled * Data Fabric C-State Enable: Force Enabled * AMD Fmax Boost Limit Control: Manual * AMD Fmax Boost Limit: 2600 * Collaborative Power Control: Enabled * XGMI Force Link Width: x4 * XGMI Max Link Width: x4 * AMD xGMI Link Speed: 16 Gbps * NUMA Group Size Optimization: Clustered * L2 Stream HW Prefetcher: Disabled * Infinity Fabric Power Management: Disabled * Infinity Fabric Performance State: P3 * Maximum PCI Express Speed: PCIe Generation 1.0 * Ethernet Network Adapter -> PCIe Link Speed: PCIe Generation 1.0 * Ethernet Network Adapter -> PCIe Power Management(ASPM): L1 Enabled Management Firmware Settings See SUT Notes System Under Test Notes * Benchmark started via ssh * SPECpower_ssj.props input.load_level.number_warehouses set to 256 due to a known inconsistency in processor reporting with this Java version * OS tunes: * modprobe cpufreq_conservative * cpupower frequency-set -g conservative * echo 3000000 > /sys/devices/system/cpu/cpufreq/conservative/sampling_rate * echo 92 > /sys/devices/system/cpu/cpufreq/conservative/up_threshold * echo 1 > /sys/devices/system/cpu/cpufreq/conservative/freq_step * echo 91 > /sys/devices/system/cpu/cpufreq/conservative/down_threshold * echo always > /sys/kernel/mm/transparent_hugepage/enabled * echo 0 > /proc/sys/kernel/nmi_watchdog * echo 6000 > /proc/sys/kernel/sched_migration_cost_ns * echo 10000000 > /proc/sys/kernel/sched_min_granularity_ns * The system ROM used for this result contains AMD AGESA version 0x0AA00205h for the AMD EPYC 9754 processor Controller System HARDWARE Hardware Vendor: Hewlett-Packard Company Model: ProLiant DL360p Gen8 CPU Description: Intel Xeon E5-2660 v3 Memory amount (GB): 128 SOFTWARE Operating System (OS): Windows Server 2019 JVM Vendor: Oracle Corporation JVM Version: 1.8.0_341-b10 CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GC21887 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: TRANSCAT Calibration Label: 5-GU3Q4-120-1 Date of Calibration: 14-Jun-2022 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.10.0-82175bac-20220817 Setup Description: SUT Power Supply 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main intake Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 431 | 26.0 90% | 383 | 26.8 80% | 356 | 26.1 70% | 291 | 25.8 60% | 262 | 26.1 50% | 240 | 26.8 40% | 217 | 27.0 30% | 193 | 26.5 20% | 167 | 26.6 10% | 136 | 27.4 Active Idle | 70.7 | 26.9 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 208V / 60 Hz / 1 phase / | 25.8 | 132 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20230521-01256-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 13,148,341 Calibration 2 | | | 13,721,219 Calibration 3 | | | 13,621,951 ssj_ops@calibrated=13,671,585 100% | 99.3% | 13,671,585 | 13,582,425 90% | 88.7% | 12,304,427 | 12,121,615 80% | 79.9% | 10,937,268 | 10,925,084 70% | 70.0% | 9,570,110 | 9,568,408 60% | 60.0% | 8,202,951 | 8,203,384 50% | 50.0% | 6,835,793 | 6,831,862 40% | 39.9% | 5,468,634 | 5,461,738 30% | 29.9% | 4,101,476 | 4,093,517 20% | 20.0% | 2,734,317 | 2,738,572 10% | 10.0% | 1,367,159 | 1,363,002 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20230521-01256.DL325G11-SLES15SP4.txt) for additional details. Copyright (C) 2007-2023 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]