SPECpower_ssj2008 Copyright (C) 2007-2021 Standard Performance Evaluation Corporation Fujitsu PRIMERGY RX2530 M6 SPECpower_ssj2008 = 12,066 overall ssj_ops/watt Test Sponsor: Fujitsu SPEC License #: 19 Tested By: Fujitsu Test Location: Kawasaki, Kanagawa, Japan Test Date: Apr 3, 2021 Publication: Apr 28, 2021 Hardware Availability: May-2021 Software Availability: Oct-2020 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.8% | 7,967,827 | 568 | 14,024 90% | 89.9% | 7,180,389 | 505 | 14,216 80% | 80.0% | 6,383,953 | 447 | 14,286 70% | 69.9% | 5,580,656 | 392 | 14,237 60% | 60.0% | 4,788,845 | 344 | 13,932 50% | 50.0% | 3,993,383 | 306 | 13,063 40% | 40.1% | 3,202,899 | 276 | 11,602 30% | 30.0% | 2,394,521 | 249 | 9,612 20% | 20.0% | 1,595,806 | 223 | 7,156 10% | 10.0% | 798,234 | 195 | 4,087 Active Idle | 0 | 132 | 0 sum of ssj_ops / sum of power = | 12,066 System Under Test Set: 'RX2530M6' Set Identifier: RX2530M6 Set Description: System Under Test # of Identical Nodes: 1 Comment: Single Node HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY RX2530 M6 Form Factor: 1U CPU Name: Intel Xeon Platinum 8380 CPU Characteristics: 40-Core, 2.30GHz, 60MB L3 Cache CPU Frequency (MHz): 2300 CPU(s) Enabled: 80 cores, 2 chips, 40 cores/chip Hardware Threads: 160 (2 / core) CPU(s) Orderable: 2 chips Primary Cache: 32 KB I + 48 KB D on chip per core Secondary Cache: 1280 KB I+D on chip per core Tertiary Cache: 60 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 256 # and size of DIMM: 16 x 16384 MB Memory Details: 16 x 16 GB 2Rx8 PC4-3200Y-R; slots 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H, 1J, 1K, 1L, 1M, 1N, 1P, 1Q, 1R populated Power Supply Quantity and Rating 1 x 900 (W): Power Supply Details: S26113-E629-V50-1 Disk Drive: 1 x SSD M.2 240GB, S26361-F5787-E240 Disk Controller: Integrated SATA Controller # and type of Network Interface 1 x PLAN CP I350-T4 4X 1000BASE-T OCPv3, Cards (NICs) Installed: PYBLA274U NICs Enabled in Firmware / OS / 4/4/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Power Saver Mode enabled in OS Operating System (OS): Windows Server 2019 Standard OS Version: version1809, build 17763.107 Filesystem: ntfs JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM 18.9 (build 11.0.9+7-LTS, mixed mode) JVM Command-line Options: -server -Xmn1700m -Xms1950m -Xmx1950m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=2 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:UseAVX=0 -XX:-UseAdaptiveSizePolicy -XX:-ThreadLocalHandshakes JVM Affinity: start /NODE [0,1,2,3] /AFFINITY [3,C,30,C0,300,C00,3000,C000,30000,C0000,300 000,C00000,3000000,C000000,30000000,C0000000 ,300000000,C00000000,3000000000,C000000000] JVM Instances: 80 JVM Initial Heap (MB): 1950 JVM Maximum Heap (MB): 1950 JVM Address Bits: 64 Boot Firmware Version: R1.3.0 Management Firmware Version: 3.20m Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: KB4464455 Boot Firmware Settings * Set "Hardware Prefetcher = Disabled" in BIOS. * Set "Adjacent Cache Line Prefetch = Disabled" in BIOS. * Set "DCU Streamer Prefetcher = Disabled" in BIOS. * Set "Intel Virtualization Technology = Disabled" in BIOS. * Set "Turbo Mode = Disabled" in BIOS. * Set "Energy Performance = Energy Efficient" in BIOS. * Set "Package C State limit = C6" in BIOS. * Set "UPI Link Frequency Select = 9.6GT/s" in BIOS. * Set "Uncore Frequency Scaling = Power Balanced" in BIOS. * Set "DDR Performance = Power balanced" in BIOS. * Set "SNC(Sub NUMA) = Enable SNC2" in BIOS. * Set "ASPM Support = L1 only" in BIOS. * Set "SATA Controller = Disabled" in BIOS. * Set "Serial Port = Disabled" in BIOS. * Set "USB Port Control = Disable all ports" in BIOS. * Set "Network Stack = Disabled" in BIOS. Management Firmware Settings None System Under Test Notes * Set "Turn off hard disk after = 1 Minute" in OS. * Set "Turn off display after = 1 Minute" in OS. * Set "Minimum processor state = 0%" in OS. * Set "Maximum processor state = 100%" in OS. * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Benchmark was started via Windows Remote Desktop Connection. * The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. * The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. * The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Controller System HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY RX2530 M2 CPU Description: 2x Intel Xeon E5-2643 v4 Memory amount (GB): 64 SOFTWARE Operating System (OS): Microsoft Windows Server 2012 R2 Standard JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 25.211-b12, mixed mode), version 1.8.0_211 CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Hioki Model: Hioki3336 Serial Number: 170213562 Connectivity: RS-232 Input Connection: Default Metrology Institute: NICT (National Institute of Information and Communications Technology) Accredited by: HIOKI E.E. CORPORATION Calibration Label: H06400088-2002 Date of Calibration: 25-Jun-2020 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.9.2-3976349f-20201208 Setup Description: Connected to PSU 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: Watchport Virtual Port 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main air intake Notes * SPECpower_ssj.props input.load_level.number_warehouses set to 160. Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 568 | 22.1 90% | 505 | 22.1 80% | 447 | 21.9 70% | 392 | 21.9 60% | 344 | 21.9 50% | 306 | 21.9 40% | 276 | 21.9 30% | 249 | 21.8 20% | 223 | 21.7 10% | 195 | 21.6 Active Idle | 132 | 21.5 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 200V / 50 Hz / 1 phase / | 21.5 | 11 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20210407-01093-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 7,975,333 Calibration 2 | | | 7,980,025 Calibration 3 | | | 7,987,303 ssj_ops@calibrated=7,983,664 100% | 99.8% | 7,983,664 | 7,967,827 90% | 89.9% | 7,185,298 | 7,180,389 80% | 80.0% | 6,386,931 | 6,383,953 70% | 69.9% | 5,588,565 | 5,580,656 60% | 60.0% | 4,790,198 | 4,788,845 50% | 50.0% | 3,991,832 | 3,993,383 40% | 40.1% | 3,193,466 | 3,202,899 30% | 30.0% | 2,395,099 | 2,394,521 20% | 20.0% | 1,596,733 | 1,595,806 10% | 10.0% | 798,366 | 798,234 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20210407-01093.WIN-7JOU3G2EID5.txt) for additional details. Copyright (C) 2007-2021 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]