| Fujitsu FUJITSU Server PRIMERGY TX1330 M3 | SPECpower_ssj2008 = 10,000 overall ssj_ops/watt | ||||
| Test Sponsor: | Fujitsu | SPEC License #: | 19 | Test Method: | Single Node | 
| Tested By: | Fujitsu | Test Location: | Kawasaki, Kanagawa, Japan | Test Date: | Mar 8, 2017 | 
| Hardware Availability: | May-2017 | Software Availability: | Jan-2015 | Publication: | Apr 12, 2017 | 
| System Source: | Single Supplier | System Designation: | Server | Power Provisioning: | Line-powered | 
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Active Power (W) | |
| 100% | 99.9% | 587,425 | 51.2 | 11,481 | 
| 90% | 89.9% | 528,569 | 47.1 | 11,230 | 
| 80% | 80.4% | 472,606 | 41.0 | 11,532 | 
| 70% | 70.2% | 412,459 | 34.8 | 11,851 | 
| 60% | 59.8% | 351,668 | 29.7 | 11,823 | 
| 50% | 49.7% | 292,100 | 26.1 | 11,175 | 
| 40% | 39.8% | 234,210 | 23.4 | 10,001 | 
| 30% | 30.1% | 176,891 | 21.4 | 8,273 | 
| 20% | 19.9% | 117,089 | 19.4 | 6,050 | 
| 10% | 9.9% | 58,469 | 16.7 | 3,500 | 
| Active Idle | 0 | 12.4 | 0 | |
| ∑ssj_ops / ∑power = | 10,000 | |||
 
    | Set Identifier: | TX1330 M3 | 
| Set Description: | System Under Test | 
| # of Identical Nodes: | 1 | 
| Comment: | Single Node | 
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu | 
| Model: | FUJITSU Server PRIMERGY TX1330 M3 | 
| Form Factor: | Tower | 
| CPU Name: | Intel Xeon E3-1230 v6 | 
| CPU Characteristics: | 4-Core, 3.50GHz, 8MB L3 Cache | 
| CPU Frequency (MHz): | 3500 | 
| CPU(s) Enabled: | 4 cores, 1 chip, 4 cores/chip | 
| Hardware Threads: | 8 (2 / core) | 
| CPU(s) Orderable: | 1 chip | 
| Primary Cache: | 32 KB I + 32 KB D on chip per core | 
| Secondary Cache: | 256 KB I+D on chip per core | 
| Tertiary Cache: | 8 MB I+D on chip per chip | 
| Other Cache: | None | 
| Memory Amount (GB): | 16 | 
| # and size of DIMM: | 2 x 8192 MB | 
| Memory Details: | 8 GB DDR4, unbuffered, ECC, 2400 MHz, PC4-2400T, DIMM, 1Rx8; slots 1A, 1B populated | 
| Power Supply Quantity and Rating (W): | 1 x 300 | 
| Power Supply Details: | Standard power supply part of base unit S26361-K1601-V101 | 
| Disk Drive: | 1 x SSD SATA 6G 64GB DOM N H-P, S26361-F5618-E64 | 
| Disk Controller: | Integrated SATA Controller | 
| # and type of Network Interface Cards (NICs) Installed: | 2 x Intel I210 Gigabit Network Connection (onboard) | 
| NICs Enabled in Firmware / OS / Connected: | 1/1/1 | 
| Network Speed (Mbit): | 1000 | 
| Keyboard: | None | 
| Mouse: | None | 
| Monitor: | None | 
| Optical Drives: | No | 
| Other Hardware: | None | 
| Software | |
|---|---|
| Power Management: | Enabled ("Balanced" power plan in OS) | 
| Operating System (OS): | Microsoft Windows Server 2012 R2 Standard | 
| OS Version: | Version 6.3.9600 Build 9600 | 
| Filesystem: | NTFS | 
| JVM Vendor: | Oracle Corporation | 
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80) | 
| JVM Command-line Options: | -server -Xmn9500m -Xms11000m -Xmx11000m -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=2 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC | 
| JVM Affinity: | None | 
| JVM Instances: | 1 | 
| JVM Initial Heap (MB): | 11000 | 
| JVM Maximum Heap (MB): | 11000 | 
| JVM Address Bits: | 64 | 
| Boot Firmware Version: | R1.0.0 | 
| Management Firmware Version: | 8.64F | 
| Workload Version: | SSJ 1.2.10 | 
| Director Location: | Controller | 
| Other Software: | None | 
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu | 
| Model: | PRIMERGY RX1330 M1 | 
| CPU Description: | Intel Xeon E3-1220 v3 | 
| Memory amount (GB): | 32 | 
| Software | |
|---|---|
| Operating System (OS): | Microsoft Windows Server 2012 R2 Standard | 
| JVM Vendor: | Oracle Corporation | 
| JVM Version: | Oracle Java HotSpot(TM) 64-Bit Server VM (build 20.0-b11, mixed mode) | 
| CCS Version: | 1.2.6 | 
| Power Analyzer pwr1 | |
|---|---|
| Hardware Vendor: | Hioki | 
| Model: | Hioki3336 | 
| Serial Number: | 170121768 | 
| Connectivity: | RS-232 | 
| Input Connection: | Default | 
| Metrology Institute: | NICT (National Institute of Information and Communications Technology) | 
| Accredited by: | HIOKI E.E. CORPORATION | 
| Calibration Label: | 2017H010225 | 
| Date of Calibration: | 20-Jan-2017 | 
| PTDaemon Host System: | same as CCS | 
| PTDaemon Host OS: | same as CCS | 
| PTDaemon Version: | 1.8.0-efc0c004-20160120 | 
| Setup Description: | Connected to PSU 1 | 
| Temperature Sensor temp1 | |
|---|---|
| Hardware Vendor: | Digi International Inc. | 
| Model: | Watchport/H | 
| Driver Version: | Watchport Virtual Port 5.10.26.0 | 
| Connectivity: | USB | 
| PTDaemon Host System: | same as CCS | 
| PTDaemon Host OS: | same as CCS | 
| Setup Description: | 5 mm in front of SUT main air intake | 
| Target Load | Average Active Power (W) | Minimum Ambient Temperature (°C) | 
|---|---|---|
| 100% | 51.2 | 21.3 | 
| 90% | 47.1 | 21.3 | 
| 80% | 41.0 | 21.3 | 
| 70% | 34.8 | 21.2 | 
| 60% | 29.7 | 21.2 | 
| 50% | 26.1 | 21.2 | 
| 40% | 23.4 | 21.2 | 
| 30% | 21.4 | 21.2 | 
| 20% | 19.4 | 21.2 | 
| 10% | 16.7 | 21.2 | 
| Active Idle | 12.4 | 21.3 | 
| Line Standard | Minimum Temperature (°C) | Elevation (m) | 
|---|---|---|
| 200V / 50 Hz / 1 phase / 2 wires | 21.2 | 11 | 
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 585,598 | ||
| Calibration 2 | 586,623 | ||
| Calibration 3 | 589,091 | ||
| ssj_ops@calibrated=587,857 | |||
| 100% | 99.9% | 587,857 | 587,425 | 
| 90% | 89.9% | 529,071 | 528,569 | 
| 80% | 80.4% | 470,286 | 472,606 | 
| 70% | 70.2% | 411,500 | 412,459 | 
| 60% | 59.8% | 352,714 | 351,668 | 
| 50% | 49.7% | 293,928 | 292,100 | 
| 40% | 39.8% | 235,143 | 234,210 | 
| 30% | 30.1% | 176,357 | 176,891 | 
| 20% | 19.9% | 117,571 | 117,089 | 
| 10% | 9.9% | 58,786 | 58,469 | 
| Active Idle | 0 | 0 | |
