SPECweb96 Result =============================================================================== || IBM : RS/6000 S80 || 40161 SPECweb96 IBM : IBM HTTP Server 1.3.6 || || =============================================================================== Throughput Response ops/sec msec 4136 8.1 8331 5.2 12429 2.4 16520 2.3 20536 2.4 24391 2.6 28347 2.7 33399 4.0 38773 10.4 40161 12.2 =============================================================================== General Availability Dates Hardware Oct-99 Operating System Sep-99 HTTP Software Aug-99 System Hardware Vendor IBM Model RS/6000 S80 Processor 450 MHz RS64-III # of Processors 12 Primary Cache 128KBI+128KBD on chip Secondary Cache 8MB(I+D) off chip Other Cache None Memory 16GB Disk Controllers Wide/Fast-20 SCSI I/O Controller Disk Subsystem 6 9.1GB 16 Bits SCSI Disk Drive Other Hardware Alteon ACEswitch 180 Gigabit Ethernet switch System Software Operating System AIX 4.3.3 Other Software None File System Type JFS HTTP Software Vendor IBM HTTP Software IBM HTTP Server 1.3.6 # of "threads" See Other Notes Server Cache FRCA (Integrated) Log Mode Common Log Format Network # of Controllers 12 Network Controller Gigabit Ethernet-SX PCI Adapter # of Nets 12 Type of Nets Gigabit Jumbo Frame Network Speed 1 Gb/sec MSL (sec) 30 Time-Wait (sec) 60 Load Generators # of Generators 46 # of Processes Each 12 Model RS/6000 7043-260 Processor 200 MHz Power 3 # of Processors 2 Memory 1024MB Network Controller Gigabit Ethernet-SX PCI Adapter Operating System AIX 4.3.2 Compiler IBM Cset++ Version 3.1.3 Benchmark Configuration Max Requested Load 41500 Max Fileset Size 4452 Test Sponsor Tested By IBM Austin License Number 11 Test Date June-99 =============================================================================== Network Notes <> Gigabit Jumbo Frame MTU=9000 <> 2 clients on first network, 4 clients on all other networks Other Notes <> server no (network option) tuning: <> no -o sb_max=262144 (max buffer size allowed for a socket, default=65535) <> no -o somaxconn=16384 (max listen backlog, default=1024) <> no -o tcp_sendspace=28000 (default socket send buffer size, default=16384) <> no -o tcp_recvspace=28000 (default socket receive buffer size, default=16384) <> no -o tcp_timewait=5 (ensure that TIME_WAIT is at least 60 seconds, default=1) <> no -o nbc_limit=393216 (max network buffer cache, default=786432) <> no -o nbc_max_cache=60000 (max file size for network buffer cache, default=131072) <> no -o nbc_pseg=80000 (number of entry allowed in private segment, default=0) <> bind frca logging thread to cpu 0 <> frca set to allow 95% cpu time on interrupt <> frca set to run without virtual host support <> processor affinity - bind each jumbo frame network intr to a cpu <> 12 httpd.conf used each binds to an ip address, minserver=5, maxserver=10 <> client no (network option) tuning: <> no -o tcp_sendspace=28000 (default socket send buffer size, default=16384) <> no -o tcp_recvspace=28000 (default socket receive buffer size, default=16384) <> no -o delayack=3 (delay ack for connection setup and shutdown, default=0) <> no -o delayackports={80} (delay ack ports, default={}) <> Alternate HTTP/HT.c used. Repeated client-side calls 'gethostbyname()' ommitted, as approved by SPEC. No change in measured server performance but reduction in client load. ===============================================================================