# Invocation command line: # /gpfs/homeb/padc/padc021/spec/omp2012-1.1-run/bin/runspec -c omp-pgi gross --output_format txt --threads=40 --reportable # output_root was not used for this run ############################################################################ # Invocation command line: # /N/soft/mason/omp2012-1.0/SPEC_OMP2012v1.0_KARST/bin/runspec --config=karst_intel --flagsurl=Intel-ic13.0-linux64.xml --reportable all # output_root was not used for this run ############################################################################ ############################################################################ # # Global options for runspec # ############################################################################ action = validate iterations = 3 output_format = all mean_anyway = 1 tune = base size = ref ext = pgi threads = 20 env_vars = 1 strict_rundir_verify = 0 default=default=default=default: # # Compiler commands # CC=pgcc CXX=pgc++ FC=pgf90 F77=pgf77 # # Compiler flags for base level optimisation # #COPTIMIZE = -O3 -ansi-alias -no-prec-div -openmp -ipo -xhost -fp-model fast=2 #CXXOPTIMIZE = -O3 -ansi-alias -no-prec-div -openmp -ipo -xhost -fp-model fast=2 COPTIMIZE = -fast -Mfprelaxed -mp -Mschar CXXOPTIMIZE = -fast -Mfprelaxed -mp FOPTIMIZE = -fast -Mfprelaxed -mp # not supported on this platform -Mipa=fast,inline # # Portability flags for each benchmark # 350.md=default=default=default: FPORTABILITY = -Mfree #351.bwaves=base=default=default: #FPORTABILITY = -mcmodel=medium #367.imagick=default=default=default: #CPORTABILITY = -std=c99 357.bt331=default=default=default: PORTABILITY = -mcmodel=medium 363.swim=default=default=default: PORTABILITY = -mcmodel=medium #372.smithwa=default=default=default: #CPORTABILITY = -Mschar # # Base level environment commands # default: notes_000 = Environment: >ENV_OMP_STACKSIZE=1G # ######################### Machine ############################# # company_name = Indiana University test_sponsor = Indiana University tester = Indiana University license_num = 3440A machine_name = prepared_by = Junjie Li hw_vendor = IBM hw_avail = Sep-2017 hw_cpu_mhz = 2860 hw_cpu_max_mhz = 3492 hw_cpu_char000 = IBM Intelligent Energy Optimization enabled, up hw_cpu_char001 = to 3.492 GHz hw_disk = 250 GB 7200 RPM 2.5" SAS hard drives hw_fpu = Integrated hw_memory000 = 256 GB (32 x 8 GB DIMMs DDR4 1600 MHz) hw_model000 = IBM S822LC for HPC hw_model001 = (Power8 with NVLink, 2.860 GHz) hw_ncpu = 16 cores, 2 chips, 8 cores/chip (HT off) hw_ncpuorder = 1-2 chips hw_nchips = 2 hw_ncores = 20 hw_ncoresperchip= 10 hw_nthreadspercore = 8 hw_other = None hw_ocache = 16 MB I+D off chip per 4 DIMMs hw_pcache = 32 KB I + 64 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_tcache = 8 MB I+D on chip per core sw_avail = Oct-2017 sw_compiler000 = C/C++/Fortran: Version 17.10 of PGI Community sw_compiler001 = Edition sw_file = NFSv3 (IBM N5500 NAS) over 10 Gb ethernet sw_os000 = CentOS Linux release 7.4.1708 (AltArch) sw_os001 = (Santiago) sw_os002 = Kernel 2.6.32-642.3.1.el6.x86_64 sw_other = None sw_state = Multi-user, run level 3 sw_base_ptrsize = 64-bit # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program /gpfs/homeb/padc/padc021/spec/omp2012-1.1-run/Docs/sysinfo notes_plat_sysinfo_005 = Revision 563 of 2016-06-10 (097295389cf6073d8c3b03fa376740a5) notes_plat_sysinfo_010 = running on juronc17.juron.dns.zone Sun Apr 22 10:32:46 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/omp2012/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = clock : 4023.000000MHz notes_plat_sysinfo_050 = machine : PowerNV 8335-GTB notes_plat_sysinfo_055 = model : 8335-GTB notes_plat_sysinfo_060 = platform : PowerNV notes_plat_sysinfo_065 = revision : 1.0 (pvr 004c 0100) notes_plat_sysinfo_070 = cpu : POWER8NVL (raw), altivec supported notes_plat_sysinfo_075 = * notes_plat_sysinfo_080 = * 0 "physical id" tags found. Perhaps this is an older system, notes_plat_sysinfo_085 = * or a virtualized system. Not attempting to guess how to notes_plat_sysinfo_090 = * count chips/cores for this system. notes_plat_sysinfo_095 = * notes_plat_sysinfo_100 = 160 "processors" notes_plat_sysinfo_105 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_110 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_115 = caution.) notes_plat_sysinfo_120 = notes_plat_sysinfo_125 = From /proc/meminfo notes_plat_sysinfo_130 = MemTotal: 267801664 kB notes_plat_sysinfo_135 = HugePages_Total: 0 notes_plat_sysinfo_140 = Hugepagesize: 16384 kB notes_plat_sysinfo_145 = notes_plat_sysinfo_150 = From /etc/*release* /etc/*version* notes_plat_sysinfo_155 = centos-release: CentOS Linux release 7.4.1708 (AltArch) notes_plat_sysinfo_160 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_165 = os-release: notes_plat_sysinfo_170 = NAME="CentOS Linux" notes_plat_sysinfo_175 = VERSION="7 (AltArch)" notes_plat_sysinfo_180 = ID="centos" notes_plat_sysinfo_185 = ID_LIKE="rhel fedora" notes_plat_sysinfo_190 = VERSION_ID="7" notes_plat_sysinfo_195 = PRETTY_NAME="CentOS Linux 7 (AltArch)" notes_plat_sysinfo_200 = ANSI_COLOR="0;31" notes_plat_sysinfo_205 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_210 = redhat-release: CentOS Linux release 7.4.1708 (AltArch) notes_plat_sysinfo_215 = system-release: CentOS Linux release 7.4.1708 (AltArch) notes_plat_sysinfo_220 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = uname -a: notes_plat_sysinfo_235 = Linux juronc17.juron.dns.zone 3.10.0-693.11.1.el7.ppc64le #1 SMP Mon Dec 4 notes_plat_sysinfo_240 = 15:48:14 GMT 2017 ppc64le ppc64le ppc64le GNU/Linux notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = run-level 3 Apr 10 19:41 notes_plat_sysinfo_255 = notes_plat_sysinfo_260 = SPEC is set to: /gpfs/homeb/padc/padc021/spec/omp2012-1.1-run notes_plat_sysinfo_265 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_270 = homeb gpfs 609T 497T 112T 82% /gpfs/homeb notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = (End of data from sysinfo program) hw_cpu_name = POWER8 with NVLink hw_disk = 609TB GPFS hw_nchips = 2 prepared_by = Junjie Li sw_file = GPFS 4.2.3.6 sw_os001 = 3.10.0-693.11.1.el7.ppc64le sw_state = Run level 3 (Multi-user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: sw_peak_ptrsize = Not Applicable flagsurl000 = http://www.spec.org/omp2012/flags/pgi17_linux_flags.20180620.xml