|
Bull (Test Sponsor: Technische Universitaet Dresden) |
SPECompG_base2012 = 8.76 |
|
bullx DLC B720 (Intel Xeon E5-2680 v4 @ 2.40 |
SPECompG_peak2012 = 9.09 |
| OMP2012 license: | 37A | Test date: | Sep-2017 |
|---|---|---|---|
| Test sponsor: | Technische Universitaet Dresden | Hardware Availability: | Jan-2016 |
| Tested by: | Technische Universitaet Dresden | Software Availability: | May-2017 |
| Hardware | |
|---|---|
| CPU Name: | Intel Xeon E5-2680 v4 |
| CPU Characteristics: | Intel Turbo Boost Technology up to 3.3 GHz |
| CPU MHz: | 2400 |
| CPU MHz Maximum: | 3300 |
| FPU: | Integrated |
| CPU(s) enabled: | 28 cores, 2 chips, 14 cores/chip |
| CPU(s) orderable: | 1,2 chips |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 256 KB I+D on chip per core |
| L3 Cache: | 35 MB I+D on chip per chip |
| Other Cache: | None |
| Memory: | 64 GB (8 x 8 GB 2Rx8 PC4-2400T-R) |
| Disk Subsystem: | 256 GB Micron SSD 1100 |
| Other Hardware: | None |
| Base Threads Run: | 28 |
| Minimum Peak Threads: | 28 |
| Maximum Peak Threads: | 28 |
| Software | |
|---|---|
| Operating System: | Red Hat Enterprise Linux Server release 6.9 (Santiago) Kernel 2.6.32-696.3.1.el6.Bull.118.x86_64 |
| Compiler: | C/C++/Fortran: Version 17.0.4.196 of Intel Composer Build 20170411 |
| Auto Parallel: | No |
| File System: | ext3 |
| System State: | Default |
| Base Pointers: | 64-bit |
| Peak Pointers: | 64-bit |
| Other Software: | None |
| Benchmark | Base | Peak | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Threads | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Threads | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
| 350.md | 28 | 436 | 10.6 | 435 | 10.6 | 428 | 10.8 | 28 | 406 | 11.4 | 422 | 11.0 | 411 | 11.3 |
| 351.bwaves | 28 | 394 | 11.5 | 396 | 11.4 | 390 | 11.6 | 28 | 390 | 11.6 | 390 | 11.6 | 392 | 11.6 |
| 352.nab | 28 | 471 | 8.26 | 470 | 8.27 | 469 | 8.30 | 28 | 429 | 9.08 | 430 | 9.05 | 429 | 9.07 |
| 357.bt331 | 28 | 440 | 10.8 | 443 | 10.7 | 441 | 10.8 | 28 | 424 | 11.2 | 427 | 11.1 | 430 | 11.0 |
| 358.botsalgn | 28 | 607 | 7.16 | 607 | 7.16 | 607 | 7.16 | 28 | 607 | 7.16 | 607 | 7.16 | 607 | 7.16 |
| 359.botsspar | 28 | 894 | 5.87 | 895 | 5.87 | 895 | 5.87 | 28 | 834 | 6.29 | 834 | 6.30 | 834 | 6.29 |
| 360.ilbdc | 28 | 675 | 5.27 | 679 | 5.24 | 680 | 5.24 | 28 | 675 | 5.27 | 679 | 5.24 | 680 | 5.24 |
| 362.fma3d | 28 | 576 | 6.60 | 580 | 6.55 | 579 | 6.56 | 28 | 576 | 6.60 | 580 | 6.55 | 579 | 6.56 |
| 363.swim | 28 | 511 | 8.87 | 511 | 8.87 | 501 | 9.03 | 28 | 511 | 8.87 | 511 | 8.87 | 501 | 9.03 |
| 367.imagick | 28 | 654 | 10.8 | 651 | 10.8 | 654 | 10.7 | 28 | 654 | 10.8 | 651 | 10.8 | 654 | 10.7 |
| 370.mgrid331 | 28 | 565 | 7.82 | 568 | 7.78 | 566 | 7.82 | 28 | 565 | 7.82 | 568 | 7.78 | 566 | 7.82 |
| 371.applu331 | 28 | 585 | 10.4 | 583 | 10.4 | 585 | 10.4 | 28 | 585 | 10.4 | 583 | 10.4 | 585 | 10.4 |
| 372.smithwa | 28 | 317 | 16.9 | 317 | 16.9 | 316 | 16.9 | 28 | 242 | 22.2 | 244 | 22.0 | 242 | 22.1 |
| 376.kdtree | 28 | 593 | 7.58 | 595 | 7.56 | 596 | 7.54 | 28 | 593 | 7.58 | 595 | 7.56 | 596 | 7.54 |
Sysinfo program /tmp/spec/1.1/Docs/sysinfo Revision 563 of 2016-06-10 (097295389cf6073d8c3b03fa376740a5) running on taurusi4264 Tue Sep 5 11:27:41 2017 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/omp2012/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E5-2680 v4 @ 2.40GHz 2 "physical id"s (chips) 28 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 14 siblings : 14 physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 cache size : 35840 KB From /proc/meminfo MemTotal: 65588120 kB HugePages_Total: 0 Hugepagesize: 2048 kB /usr/bin/lsb_release -d Red Hat Enterprise Linux Server release 6.9 (Santiago) From /etc/*release* /etc/*version* redhat-release: Red Hat Enterprise Linux Server release 6.9 (Santiago) system-release: Red Hat Enterprise Linux Server release 6.9 (Santiago) system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server uname -a: Linux taurusi4264 2.6.32-696.3.1.el6.Bull.118.x86_64 #1 SMP Thu Jun 15 17:05:40 CEST 2017 x86_64 x86_64 x86_64 GNU/Linux run-level 3 Aug 1 18:29 SPEC is set to: /tmp/spec/1.1 Filesystem Type Size Used Avail Use% Mounted on /dev/sda4 ext4 99G 1.7G 92G 2% /tmp Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' (End of data from sysinfo program)
System settings: HyperThreading: disabled Environment variables: ENV_KMP_AFFINITY=compact,0 ENV_KMP_LIBRARY=turnaround ENV_KMP_BLOCKTIME=infinite ENV_KMP_STACKSIZE=190M ENV_OMP_DYNAMIC=FALSE ENV_OMP_NESTED=FALSE
| 350.md: | -FR |
| 357.bt331: | -mcmodel=medium |
| 363.swim: | -mcmodel=medium |
| 367.imagick: | -std=c99 |
| -O2 -openmp -ipo -xCORE-AVX2 -ansi-alias |
| -O2 -openmp -ipo -xCORE-AVX2 -ansi-alias |
| -O2 -openmp -ipo -xCORE-AVX2 -align array64byte |
| 350.md: | -FR |
| 357.bt331: | -mcmodel=medium |
| 363.swim: | -mcmodel=medium |
| 367.imagick: | -std=c99 |
| 352.nab: | -O3 -openmp -ipo -xCORE-AVX2 -fno-alias -opt-malloc-options=1 -opt-calloc -fp-model fast=2 -no-prec-div -no-prec-sqrt -ansi-alias |
| 358.botsalgn: | basepeak = yes |
| 359.botsspar: | -O3 -openmp -ipo -xCORE-AVX2 -fno-alias -ansi-alias |
| 367.imagick: | basepeak = yes |
| 372.smithwa: | -O2 -openmp -ipo -xCORE-AVX2 -fno-alias -opt-streaming-stores always -opt-malloc-options=1 -ansi-alias |
| 376.kdtree: | basepeak = yes |
| 350.md: | -O2 -openmp -ipo -xCORE-AVX2 -fno-alias -opt-malloc-options=1 -fp-model fast=2 -no-prec-div -no-prec-sqrt -align array64byte |
| 351.bwaves: | -O3 -openmp -ipo -xCORE-AVX2 -fno-alias -fp-model fast=2 -no-prec-div -no-prec-sqrt -align array64byte |
| 357.bt331: | Same as 351.bwaves |
| 360.ilbdc: | basepeak = yes |
| 362.fma3d: | basepeak = yes |
| 363.swim: | basepeak = yes |
| 370.mgrid331: | basepeak = yes |
| 371.applu331: | basepeak = yes |