# Invocation command line: # /spec/mpi2007/bin/runspec --reportable -v 10 -c config --define SOFTWARE=V9_V111.qipathreads --define OPTIMIZATIONS=literal --define SYSTEM=BladeCenterH.4x4way.p6_4000mhz --define LARGE_PAGES=1 --define PROCESSORS=8 --define SMT=on --define MEMORY=33285799936 --define PINSHM=0 --define OPT_F_base=-O4 -qstrict -qalias=nostd -qhot=level=0 -qsave -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define BITS_F_base=32 --define OPT_C_base=-O5 -D_ILS_MACROS -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define BITS_C_base=32 --define OPT_CXX_base=-O5 --define BITS_CXX_base=32 --define OPT_F_107_leslie3d=-O5 -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define BITS_107_leslie3d=32 --define OPT_F_115_fds4=-O5 -qstrict -qalias=nostd -qhot=level=0 -qsave -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define OPT_C_115_fds4=-O5 -lessl -D_ILS_MACROS -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define BITS_115_fds4=64 --define OPT_C_122_tachyon=-O5 -lessl -D_ILS_MACROS -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define BITS_122_tachyon=64 --define OPT_F_127_wrf2=-O5 --define OPT_C_127_wrf2=-O5 --define BITS_127_wrf2=32 --define OPT_F_129_tera_tf=-O5 -qessl -lessl -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define BITS_129_tera_tf=32 --define OPT_F_130_socorro=-O5 -qessl -lessl -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define OPT_C_130_socorro=-O5 -lessl -D_ILS_MACROS -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define BITS_130_socorro=32 --define EXTENSION=MediumPages -n 3 -T all -i mref medium # output_root was not used for this run ############################################################################ # Invocation command line: # /spec/mpi2007/bin/configpp -c mpi2007 --define SOFTWARE=V9_V111.qipathreads --define OPTIMIZATIONS=literal --define SYSTEM=BladeCenterH.4x4way.p6_4000mhz --define LARGE_PAGES=1 --define PROCESSORS=8 --define SMT=on --define MEMORY=33285799936 --define PINSHM=0 --define OPT_F_base=-O4 -qstrict -qalias=nostd -qhot=level=0 -qsave -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define BITS_F_base=32 --define OPT_C_base=-O5 -D_ILS_MACROS -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define BITS_C_base=32 --define OPT_CXX_base=-O5 --define BITS_CXX_base=32 --define OPT_F_107_leslie3d=-O5 -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define BITS_107_leslie3d=32 --define OPT_F_115_fds4=-O5 -qstrict -qalias=nostd -qhot=level=0 -qsave -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define OPT_C_115_fds4=-O5 -lessl -D_ILS_MACROS -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define BITS_115_fds4=64 --define OPT_C_122_tachyon=-O5 -lessl -D_ILS_MACROS -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define BITS_122_tachyon=64 --define OPT_F_127_wrf2=-O5 --define OPT_C_127_wrf2=-O5 --define BITS_127_wrf2=32 --define OPT_F_129_tera_tf=-O5 -qessl -lessl -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define BITS_129_tera_tf=32 --define OPT_F_130_socorro=-O5 -qessl -lessl -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define OPT_C_130_socorro=-O5 -lessl -D_ILS_MACROS -bdatapsize:64K -bstackpsize:64K -btextpsize:64K --define BITS_130_socorro=32 --define EXTENSION=MediumPages # output_root was not used for this run test_sponsor = IBM Corporation license_num = 0005 tester = IBM Corporation prepared_by = IBM Corporation backup_config = 0 # No automatic backup. output_format = rsf,asc,html,csv,flags # Make sure we capture the config each time, instead. log_line_width = 190 # Prevent log file lines that are too long for "vi". flagsurl001 = http://www.spec.org/mpi2007/flags/IBM-XL.xml flagsurl002 = http://www.spec.org/mpi2007/flags/IBM-AIX.xml flagsurl000 = http://www.spec.org/mpi2007/flags/MPI2007_flags.20081105.xml env_vars = 1 # Allowed for reportable MPI runs. mean_anyway = 1 section_specifier_fatal = 0 allow_extension_override = yes # Compilation is "extension neutral". ext = MediumPages default=default=default=default: system_vendor = IBM Corporation system_name = IBM BladeCenter JS22 Express (4 GHz, 4x4 core) sw_parallel_other = None node_Blade_sw_other = None node_Blade_hw_adapter_InfiniBand_interconnect = InfiniBand node_Blade1_sw_state = Multi-user node_Blade1_sw_sharedfile = NFSv3 node_Blade1_sw_other = None node_Blade1_sw_os = IBM AIX V6.1 with the 6100-02 Technology Level node_Blade1_sw_localfile = AIX/JFS2 node_Blade1_purpose = compute, head, fileserver node_Blade1_order = 1 node_Blade1_label = IBM System JS22 node_Blade1_hw_vendor = IBM Corporation node_Blade1_hw_tcache = None node_Blade1_hw_scache = 4 MB I+D on chip per core node_Blade1_hw_pcache = 64 KB I + 64 KB D on chip per core node_Blade1_hw_ocache = None node_Blade1_hw_nthreadspercore = 2 node_Blade1_hw_ncpuorder = 4 cores per blade node_Blade1_hw_ncoresperchip = 2 node_Blade1_hw_ncores = 4 node_Blade1_hw_nchips = 2 node_Blade1_hw_model = IBM System JS22 node_Blade1_hw_memory = 32 GB (4x8 GB) DDR2 500 MHz node_Blade1_hw_disk = 1x146 GB SAS 15K RPM node_Blade1_hw_cpu_name = POWER6 node_Blade1_hw_cpu_mhz = 4000 node_Blade1_hw_adapter_InfiniBand_slot_type = PCIe x8 Gen2 node_Blade1_hw_adapter_InfiniBand_ports_used = 1 node_Blade1_hw_adapter_InfiniBand_interconnect = InfiniBand node_Blade1_hw_adapter_InfiniBand_firmware = 2.3.0 node_Blade1_hw_adapter_InfiniBand_driver = devices.pciex.b3157862.rte 6.1.2.0 node_Blade1_hw_adapter_InfiniBand_data_rate = 4x DDR 20Gbps node_Blade1_hw_adapter_InfiniBand_count = 1 node_Blade1_count = 1 interconnect_InfiniBand_hw_switch_QLogic_firmware = 4.2.1.1.1 interconnect_InfiniBand_hw_switch_QLogic_data_rate = 4x DDR 20Gbps interconnect_Ethernet_order = 2 system_class = Heterogeneous hw_avail = Nov-2008 node_Blade_label = IBM System JS22 node_Blade_purpose = compute node_Blade_order = 2 node_Blade_count = 3 node_Blade_hw_vendor = IBM Corporation node_Blade_hw_model = IBM System JS22 node_Blade_hw_cpu_name = POWER6 node_Blade_hw_ncpuorder = 4 cores per blade node_Blade_hw_ncores = 4 node_Blade_hw_nchips = 2 node_Blade_hw_ncoresperchip = 2 node_Blade_hw_nthreadspercore = 2 node_Blade_hw_cpu_char = node_Blade_hw_cpu_mhz = 4000 node_Blade_hw_pcache = 64 KB I + 64 KB D on chip per core node_Blade_hw_scache = 4 MB I+D on chip per core node_Blade_hw_tcache = None node_Blade_hw_ocache = None node_Blade_hw_memory = 16 GB (4x4 GB) DDR2 667 MHz node_Blade_hw_disk = 1x146 GB SAS 15K RPM node_Blade_hw_other000 = BladeCenter-H chassis node_Blade_hw_other001 = Voltaire 4X InfiniBand Pass-thru Module (P/N node_Blade_hw_other002 = 43W4419) node_Blade_sw_os = IBM AIX V6.1 with the 6100-02 Technology Level node_Blade_sw_state = Multi-user node_Blade_sw_localfile = AIX/JFS2 node_Blade_sw_sharedfile = NFSv3 node_Blade_hw_adapter_InfiniBand_model000= 4X InfiniBand DDR Expansion Card (CFFh) for IBM node_Blade_hw_adapter_InfiniBand_model001 = BladeCenter (P/N 43W4423) node_Blade_hw_adapter_InfiniBand_count = 1 node_Blade_hw_adapter_InfiniBand_slot_type =PCIe x8 Gen2 node_Blade_hw_adapter_InfiniBand_data_rate = 4x DDR 20Gbps node_Blade_hw_adapter_InfiniBand_ports_used = 1 node_Blade_hw_adapter_InfiniBand_driver = devices.pciex.b3157862.rte 6.1.2.0 node_Blade_hw_adapter_InfiniBand_firmware = 2.3.0 node_Blade_notes_000 = Each blade runs the following commands to compose the cluster, where $CLUSTER_INDEX is 2-4 for Blade[2]-Blade[4]: node_Blade_notes_005 = mkdev -c management -s infiniband -t icm node_Blade_notes_010 = /usr/sbin/mkiba -a 192.1.10.$CLUSTER_INDEX -m 255.255.255.0 -i ib0 -A iba0 -p 1 -P 0xFFFF -M 65532 -q 4000 -k off -Q 0x1E -S up node_Blade_notes_015 = startsrc -s ctcas node_Blade_notes_020 = preprpnode mpiblade1 node_Blade_notes_025 = cd /usr/lpp/ppe.poe/samples/nrt node_Blade_notes_030 = make node_Blade_notes_035 = chmod 4755 nrt_api node_Blade_notes_040 = shutdown -rF node_Blade_notes_045 = su spec node_Blade_notes_050 = cd mpiblades.64ranks.load node_Blade_notes_055 = ../nrt_api -l node_Blade_notes_060 = interconnect_InfiniBand_label = InfiniBand interconnect_InfiniBand_order = 1 interconnect_InfiniBand_purpose = MPI Communication interconnect_InfiniBand_hw_vendor = IBM Corporation interconnect_InfiniBand_hw_model = 4x DDR InfiniBand interconnect_InfiniBand_hw_switch_QLogic_count = 1 interconnect_InfiniBand_hw_switch_QLogic_model =QLogic SilverStorm 9024 interconnect_InfiniBand_hw_switch_QLogic_ports = 24 interconnect_InfiniBand_hw_topo = single switch interconnect_Ethernet_label = Ethernet interconnect_Ethernet_purpose = File system interconnect_Ethernet_hw_vendor = IBM Corporation interconnect_Ethernet_hw_model = 4-port Gigabit Ethernet interconnect_Ethernet_hw_switch_builtin_count =1 interconnect_Ethernet_hw_switch_builtin_data_rate =1Gbps interconnect_Ethernet_hw_switch_builtin_firmware =1.08 interconnect_Ethernet_hw_switch_builtin_model000 =IBM BladeCenter 4-port Gigabit Ethernet switch interconnect_Ethernet_hw_switch_builtin_model001 = module (P/N 26K6483) interconnect_Ethernet_hw_switch_builtin_ports =18 interconnect_Ethernet_hw_topo = single switch notes_comp_000 = Blade[1], with 32GB of memory and 32GB of paging space, was used to compile the benchmarks. # # # MPI Environment settings for this system configuration. # # Basic functional settings, and performance setting that won't change: # ENV_MP_PGMMODEL = spmd ENV_MP_MSG_API = mpi ENV_MP_DEVTYPE = ib # InfiniBand. Anything else is too slow. ENV_MP_CLOCK_SOURCE = AIX # Use AIX as the source of the clock. ENV_MP_STDINMODE = none # Don't block waiting for input. ENV_MEMORY_AFFINITY = MCM # Bind memory allocation to local cpu. ENV_MP_SHARED_MEMORY = yes # How to pass messages between tasks. ENV_MP_SINGLE_THREAD = yes # Avoids mutex lock overheads with one thread. # ENV_MP_EUILIB = ip # Communication subsystem implementation. ENV_MP_EUILIB = us # User-mode communication is significantly faster. ENV_NRT_WINDOW_COUNT = 1 ENV_MP_RESD = no # Turn off LoadLeveler. ENV_MP_PULSE = 0 # Interval for checking remote nodes. ENV_MP_ADAPTER_USE = shared ENV_MP_EUIDEVICE = sn_single # ENV_EUIDEVICE = sn_all # # Policies & resource limits. These may affect performance, but if they're too far off, the programs are likely to fail. # ENV_MP_CSS_INTERRUPT = no # Do arriving message packets cause interrupts? ENV_MP_BUFFER_MEM = 67108864 # Size of the Early Arrival (EA) buffer. ENV_MP_USE_BULK_XFER = yes # Enable Reliable Datagram Messaging (RDMA) ENV_MP_BULK_MIN_MSG_SIZE = 8192 # Size of RDMA message size. # ENV_MP_EAGER_LIMIT = 16384 # Use rendezvous protocol above this message size. ENV_MP_EAGER_LIMIT = 65536 # Default value is 4096. # ENV_MP_WAIT_MODE = poll # What to do when thread is blocked. ENV_MP_WAIT_MODE = yield # 4/5/04 # ENV_LAPI_DEBUG_SLOT_ATT_THRESH = 400000 # ENV_LAPI_DEBUG_SLOT_ATT_THRESH = 500000 # # Changing these settings can produce useful information for debugging. # Note that validation failures can occur when the program output format is changed. # ENV_MP_INFOLEVEL = 0 # Level of message reporting. # ENV_MP_LABELIO = yes # Differentiate the task outputs by ID. ENV_MP_LABELIO = no # ENV_MP_STDOUTMODE = ordered # Easier to read, but not "natural" order. ENV_MP_STDOUTMODE = unordered # Preserve the order as produced by the processes. # ENV_MP_PMDLOG = yes # Collect diagnostic messages. ENV_MP_PMDLOG = no # ENV_MP_S_ENABLE_ERR_PRINT = yes # HAL debug info. # # Here we manage resources specific to the system configuration. # This includes the mapping of MPI ranks to the cores on the system, # and the memory requirements of the benchmarks. # default=default=default=default: # Base & default-peak cases. ENV_NRT_JOB_KEY=64 ranks=32 # submit = poe task_stride.2level.128rank 4 2 14 $ranks $command -procs $ranks -hostfile /spec/MapFiles/ib0hosts.8x.1-14 submit = poe task_stride.2level.32+64rank 4 2 8 $ranks $command -procs $ranks -hostfile /spec/MapFiles/ib0hosts.8x.1-8 # # # Memory arrangement of 32-bit base binaries. # default=base=default=default: LDCXXFLAGS = -bmaxdata:0x80000000 # Set large stack for 32 bit executables. LDCFLAGS = -bmaxdata:0x80000000 # Set large stack for 32 bit executables. LDFFLAGS = -bmaxdata:0x80000000 # Set large stack for 32 bit executables. # # Memory arrangement of 32-bit peak binaries. # 107.leslie3d=peak=default=default: EXTRA_LDFLAGS = -bmaxdata:0x70000000 # Set large stack for 32 bit executables. 127.wrf2=peak=default=default: EXTRA_LDFLAGS = -bmaxdata:0x80000000 # Set large stack for 32 bit executables. 130.socorro=peak=default=default: EXTRA_LDFLAGS = -bmaxdata:0x80000000 # Set large stack for 32 bit executables. # # Software declarations. # default=default=default=default: sw_c_compiler000= IBM XL C/C++ Enterprise Edition V9 for AIX sw_c_compiler001 = Updated with the September 2008 Fix level sw_cxx_compiler000= IBM XL C/C++ Enterprise Edition V9 for AIX sw_cxx_compiler001 = Updated with the September 2008 Fix level sw_f_compiler000= IBM XL Fortran Enterprise Edition V11.1 for AIX sw_f_compiler001 = Updated with the September 2008 Fix level sw_mpi_library000= IBM Parallel Environment for AIX, Version 5 sw_mpi_library001 = Release 1 sw_other000 = IBM Engineering and Scientific Subroutine Library sw_other001 = (ESSL) for AIX Version 4 Release 3 Updated with sw_other002 = PTF Set 3 sw_avail = Nov-2008 # # General environment settings. # # OS_LIBS=-L/usr/lib # TMPDIR=/tmp # This can get unset by upper-layer tools. # PDFDIR=/tmp # Tell the compiler where the PDF data will go. ENV_XLFRTEOPTS=intrinthds=1 # # # Compiler invocations. # The settings used here are for IBM C/C++ and xl Fortran compilers # #C_COMPILER = /c/dev_050810/vacpp #F_COMPILER = /c/dev_050810/xlf #C_COMPILER = #F_COMPILER = C_COMPILER = F_COMPILER = CC = ${C_COMPILER}/usr/bin/mpcc_r CXX = ${C_COMPILER}/usr/bin/mpCC_r EXTRA_CFLAGS = -w -qsuppress=1500-036 -qipa=noobject -qipa=threads EXTRA_CXXFLAGS = -w -qsuppress=1500-036 -qipa=noobject -qipa=threads FC = ${F_COMPILER}/usr/bin/mpxlf95_r # EXTRA_FFLAGS = -w -qsuppress=1500-036 -qsuppress=cmpmsg -qipa=threads -qspillsize=32648 EXTRA_FFLAGS = -w -qsuppress=1500-036 -qsuppress=cmpmsg -qspillsize=32648 # # # Portability Flags. # # Only language-level flags, data-space sizing, and certain optimization-suppression # flags are allowed here. No optimizations are allowed. The {F/C/CXX}PORTABILITY # variables are set in this file and nowhere else. # # Generaly applicable srcalt's are allowed here. # # We also have the "strange submit" overrides here that deal with idiosyncratic # invocations of the benchmarks. # # If there aren't any flags for the benchmark, we leave an empty entry as a placeholder. 104.milc=default=default=default: 107.leslie3d=default=default=default: FPORTABILITY = -qfixed 113.GemsFDTD=default=default=default: # srcalt=maxprocandstop # srcalt=stopstatement 115.fds4=default=default=default: FPORTABILITY = -qfixed CPORTABILITY = -DSPEC_MPI_LC_NO_TRAILING_UNDERSCORE 121.pop2=default=default=default: CPORTABILITY = -DSPEC_MPI_AIX 122.tachyon=default=default=default: # fast_rundir_verify=1 126.lammps=default=default=default: 127.wrf2=default=default=default: CPORTABILITY = -DNOUNDERSCORE -DSPEC_MPI_AIX # FPORTABILITY = -qspillsize=32648 128.GAPgeofem=default=default=default: 129.tera_tf=default=default=default: 130.socorro=default=default=default: CPORTABILITY = -DSPEC_NO_UNDERSCORE -qcpluscmt 132.zeusmp2=default=default=default: FPPPORTABILITY = -DSPEC_SINGLE_UNDERSCORE FPORTABILITY = -qfixed 137.lu=default=default=default: FPORTABILITY = -qfixed # default=default=default=default: # ranks=$[ENV_MP_PROCS] # ranks=$ENV_MP_PROCS # submit = poe petaskbind.sh $command # submit = poe task_stride.2level 4 2 8 $command # submit = poe $command # # Default Optimizations. These apply to both the "base" and "peak" cases. # They are listed before the portabilities so the portability settings can override them. # default=default=default=default: # # Base Level Optimizations. # default=base=default=default: FOPTIMIZE = -O4 -qstrict -qalias=nostd -qhot=level=0 -qsave -bdatapsize:64K -bstackpsize:64K -btextpsize:64K COPTIMIZE = -O5 -D_ILS_MACROS -bdatapsize:64K -bstackpsize:64K -btextpsize:64K CXXOPTIMIZE = -O5 sw_base_ptrsize = 32-bit # # Inherited "peak" level optimization. If no optimization is selected, then this kicks in. # default=peak=default=default: basepeak=1 # # # Per-benchmark Peak-Level optimizations # 104.milc=peak=default=default: 107.leslie3d=peak=default=default: basepeak = 0 FOPTIMIZE = -O5 -bdatapsize:64K -bstackpsize:64K -btextpsize:64K 113.GemsFDTD=peak=default=default: 115.fds4=peak=default=default: basepeak = 0 FOPTIMIZE = -O5 -qstrict -qalias=nostd -qhot=level=0 -qsave -bdatapsize:64K -bstackpsize:64K -btextpsize:64K EXTRA_FOPTIMIZE = -q64 COPTIMIZE = -O5 -lessl -D_ILS_MACROS -bdatapsize:64K -bstackpsize:64K -btextpsize:64K EXTRA_COPTIMIZE = -q64 121.pop2=peak=default=default: 122.tachyon=peak=default=default: basepeak = 0 COPTIMIZE = -O5 -lessl -D_ILS_MACROS -bdatapsize:64K -bstackpsize:64K -btextpsize:64K EXTRA_COPTIMIZE = -q64 126.lammps=peak=default=default: 127.wrf2=peak=default=default: basepeak = 0 FOPTIMIZE = -O5 COPTIMIZE = -O5 128.GAPgeofem=peak=default=default: 129.tera_tf=peak=default=default: basepeak = 0 FOPTIMIZE = -O5 -qessl -lessl -bdatapsize:64K -bstackpsize:64K -btextpsize:64K 130.socorro=peak=default=default: basepeak = 0 FOPTIMIZE = -O5 -qessl -lessl -bdatapsize:64K -bstackpsize:64K -btextpsize:64K COPTIMIZE = -O5 -lessl -D_ILS_MACROS -bdatapsize:64K -bstackpsize:64K -btextpsize:64K 132.zeusmp2=peak=default=default: 137.lu=peak=default=default: # # # Deal with the 32-vs-64 bits in the "peak" optimizations. # # The BITS_32 & BITS_64 are defined in the optimizations file. # They are aggregated over all the benchmarks to determine the "mixed" case. # default=peak=default=default: sw_peak_ptrsize = 32/64-bit sw_mpi_other = None sw_preprocessors = None # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: node_Blade1_hw_adapter_InfiniBand_model000 = 4X InfiniBand DDR Expansion Card (CFFh) for IBM node_Blade1_hw_adapter_InfiniBand_model001 = BladeCenter (P/N 43W4423) node_Blade1_hw_other000 = BladeCenter-H chassis node_Blade1_hw_other001 = Voltaire 4X InfiniBand Pass-thru Module (P/N node_Blade1_hw_other002 = 43W4419) notes_submit_000 = submit = poe task_stride.2level.32+64rank 4 2 8 $ranks $command -procs $ranks -hostfile /spec/MapFiles/ib0hosts.8x.1-8 notes_000 = notes_005 = Environment settings: notes_010 = All ulimits set to unlimited notes_015 = ranks = 32 notes_020 = CWD = /spec/mpi2007 notes_025 = MEMORY_AFFINITY = MCM notes_030 = XLFRTEOPTS = intrinthds=1 notes_035 = MP_PGMMODEL = spmd notes_040 = MP_MSG_API = mpi notes_045 = MP_DEVTYPE = ib notes_050 = MP_CLOCK_SOURCE = AIX notes_055 = MP_STDINMODE = none notes_060 = MP_SHARED_MEMORY = yes notes_065 = MP_SINGLE_THREAD = yes notes_070 = MP_EUILIB = us notes_075 = NRT_WINDOW_COUNT = 1 notes_080 = MP_RESD = no notes_085 = MP_PULSE = 0 notes_090 = ADAPTER_USE = shared notes_095 = EUIDEVICE = sn_single notes_100 = MP_CSS_INTERRUPT = no notes_105 = MP_BUFFER_MEM = 67108864 notes_110 = MP_USE_BULK_XFER = yes notes_115 = MP_BULK_MIN_MSG_SIZE = 8192 notes_120 = MP_EAGER_LIMIT = 65536 notes_125 = MP_WAIT_MODE = yield notes_130 = MP_INFOLEVEL = 0 notes_135 = MP_LABELIO = no notes_140 = MP_STDOUTMODE = unordered notes_145 = MP_PMDLOG = no notes_150 = NRT_JOB_KEY = 64 notes_155 = node_Blade1_notes_000 = Blade[1] runs the following commands to compose the cluster: node_Blade1_notes_005 = mkdev -c management -s infiniband -t icm node_Blade1_notes_010 = /usr/sbin/mkiba -a 192.1.10.1 -m 255.255.255.0 -i ib0 -A iba0 -p 1 -P 0xFFFF -M 65532 -q 4000 -k off -Q 0x1E -S up node_Blade1_notes_015 = startsrc -s ctcas node_Blade1_notes_020 = preprpnode mpiblade1 node_Blade1_notes_025 = mkrpdomain mpiblades mpiblade1 mpiblade2 mpiblade3 mpiblade4 node_Blade1_notes_030 = startrpdomain mpiblades node_Blade1_notes_035 = cd /usr/lpp/ppe.poe/samples/nrt node_Blade1_notes_040 = make node_Blade1_notes_045 = chmod 4755 nrt_api node_Blade1_notes_050 = shutdown -rF node_Blade1_notes_055 = su spec node_Blade1_notes_060 = cd mpiblades.64ranks.load node_Blade1_notes_065 = ../nrt_api -l node_Blade1_notes_070 =