# Invocation command line:
# /root/omp2012/bin/runspec --reportable --threads 480 -a validate -n 3 -o asc,csv,html,cfg,pdf -i ref -T base -c sgi-linux-ic14.cfg gross
# output_root was not used for this run
############################################################################
############################################################################
# Invocation command line:
############################################################################
#teeout		      = yes
output_format	     = all
tune		     = base
ext		     = 14.0.1.106
flagsurl000          = http://www.spec.org/omp2012/flags/SGI-OMP2012-ic14.20150430.xml
flagsurl001          = http://www.spec.org/omp2012/flags/SGI-UV300-RevA.xml
check_md5	     = yes
env_vars	     = yes
mean_anyway          = 1
use_submit_for_speed = 1
strict_rundir_verify = 1
sysinfo_program      = specperl $[top]/Docs/sysinfo -f -p
submit               = dplace -x2 $command

company_name	     = SGI
test_sponsor         = SGI
tester               = SGI
license_num          = 14

hw_vendor	     = SGI
hw_avail             = Dec-2014
hw_model             = SGI UV 300 (Intel Xeon E7-8890 v2, 2.80 GHz)
hw_ncpuorder         = 4-32 chips
hw_cpu_name          = Intel Xeon E7-8890 v2
hw_cpu_char          = Intel Turbo Boost Technology up to 3.4 GHz
hw_nchips            = 32
hw_ncoresperchip     = 15
hw_nthreadspercore   = 1
hw_ncores            = 480
hw_cpu_mhz           = 2800
hw_cpu_max_mhz       = 3400
hw_pcache	     = 32 KB I + 32 KB D on chip per core
hw_scache	     = 256 KB I+D on chip per core
hw_tcache            = 37.5 MB I+D on chip per chip
hw_ocache	     = None
hw_fpu               = Integrated
hw_memory000         = 4 TB (256 x 16 GB 2Rx4 PC3-14900R-13, ECC,
hw_memory001         = running at 1333 MHz)
hw_disk000           = 1 x 160 GB SSD (Intel SSD 320 Series,
hw_disk001           = SATA II)
hw_other	     = None

sw_avail             = Dec-2014
sw_compiler000       = C/C++/Fortran: Version 14.0.1.106 of Intel
sw_compiler001       = Composer XE for Linux, Build 20131008
sw_base_ptrsize      = 64-bit
sw_peak_ptrsize      = Not Applicable
sw_parallel_other    = None
sw_file		     = ext3
sw_os000             = SUSE Linux Enterprise Server 11 (x86_64) SP3
sw_os001             = Kernel 3.0.101-0.46-default
sw_state             = Multi-user, run level 3
sw_other000          = SGI Accelerate 1.9
sw_other001          = (Build 711rp57.sles11sp3-1502132100),
sw_other002          = SGI Foundation Software 2.11
sw_other003          = (Build 711rp57.sles11sp3-1502132100)

prepared_by          = Dave Raddatz (draddatz@sgi.com)

#
# These are listed as benchmark-tuning-extension-machine
#
default=default=default=default:
CC = icc
FC = ifort
CXX = icpc
#
# portability & libraries
#
#default=default=default=default:

ENV_KMP_AFFINITY=disabled
ENV_OMP_NUM_THREADS=480
ENV_KMP_STACKSIZE=200M
ENV_KMP_SCHEDULE=static,balanced
ENV_OMP_DYNAMIC=FALSE

gross=base=default=default:
COPTIMIZE = -O3 -xAVX  -ipo1 -openmp -ansi-alias -mcmodel=medium -shared-intel
CXXOPTIMIZE = -O3 -xAVX -ipo1  -openmp -ansi-alias -mcmodel=medium -shared-intel
FOPTIMIZE = -O3 -xAVX -ipo1  -openmp -mcmodel=medium -shared-intel

350.md=default=default=default:
FPORTABILITY = -free

367.imagick=default=default=default:
CPORTABILITY = -std=c99

372.smithwa=default=default=default:
srcalt=redundant

default:
notes_submit_000 =For all benchmarks threads were bound to cores using
notes_submit_005 =the following submit command:
notes_submit_010 =    dplace -x2 $command
notes_submit_015 =This binds threads in order of creation, beginning
notes_submit_020 =with the master thread on logical cpu 0, the first slave
notes_submit_025 =thread on logical cpu 1, and so on.  The -x2 flag instructs
notes_submit_030 =dplace to skip placement of the lightweight OpenMP monitor
notes_submit_035 =thread, which is created prior to the slave threads.
notes_submit_040 =
notes_os_000 =Transparent Hugepages :
notes_os_005 =    Transparent Hugepages are disabled by
notes_os_010 =    echo never > /sys/kernel/mm/transparent_hugepage/enabled
notes_os_015 =
notes_os_020 =Software Environment:
notes_os_025 =    export KMP_AFFINITY=disabled
notes_os_030 =    export KMP_STACKSIZE=200M
notes_os_035 =    export KMP_SCHEDULE=static,balanced
notes_os_040 =    export OMP_DYNAMIC=FALSE
notes_os_045 =    ulimit -s unlimited
notes_os_050 =


# The following settings were obtained by running 'specperl $[top]/Docs/sysinfo -f -p'
default:
# Sysinfo program /root/omp2012/Docs/sysinfo
# $Rev: 395 $ $Date:: 2012-07-25 #$ 8f8c0fe9e19c658963a1e67685e50647
# running on harp27-sys Sat Apr 11 13:28:04 2015
#
# This section contains SUT (System Under Test) info as seen by
# some common utilities.  To remove or add to this section, see:
#   http://www.spec.org/omp2012/Docs/config.html#sysinfo
#
# From /proc/cpuinfo
#    model name : Intel(R) Xeon(R) CPU E7-8890 v2 @ 2.80GHz
#       32 "physical id"s (chips)
#       480 "processors"
#    cores, siblings (Caution: counting these is hw and system dependent.  The
#    following excerpts from /proc/cpuinfo might not be reliable.  Use with
#    caution.)
#       cpu cores : 15
#       siblings  : 15
#       physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 2: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 3: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 4: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 5: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 6: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 7: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 8: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 9: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 10: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 11: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 12: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 13: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 14: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 15: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 16: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 17: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 18: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 19: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 20: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 21: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 22: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 23: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 24: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 25: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 26: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 27: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 28: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 29: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 30: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#       physical 31: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
#    cache size : 38400 KB
#
# From /proc/meminfo
#    MemTotal:       4102778388 kB
#    HugePages_Total:       0
#    Hugepagesize:       2048 kB
#
# /usr/bin/lsb_release -d
#    SUSE Linux Enterprise Server 11 (x86_64)
#
# From /etc/*release* /etc/*version*
#    SuSE-release:
#       SUSE Linux Enterprise Server 11 (x86_64)
#       VERSION = 11
#       PATCHLEVEL = 3
#    sgi-accelerate-release: SGI Accelerate 1.9, Build
#    711rp57.sles11sp3-1502132100
#    sgi-foundation-release: SGI Foundation Software 2.11, Build
#    711rp57.sles11sp3-1502132100
#    sgi-mpi-release: SGI MPI 1.9, Build 711rp57.sles11sp3-1502132100
#
# uname -a:
#    Linux harp27-sys 3.0.101-0.46-default #1 SMP Wed Dec 17 11:04:10 UTC 2014
#    (8356111) x86_64 x86_64 x86_64 GNU/Linux
#
# run-level 3 Apr 10 15:24 last=S
#
# SPEC is set to: /root/omp2012
#    Filesystem     Type  Size  Used Avail Use% Mounted on
#    /dev/sda6      ext3   46G   44G     0 100% /
#
# Additional information from dmidecode:
#   BIOS Silicon Graphics International Corp. SGI UV 300 series BIOS 11/13/2014
#   Memory:
#    256x Hynix HMT42GR7AFR4C-RD 16 GB 1333 MHz 1 rank
#
# (End of data from sysinfo program)
# hw_cpu_name    = Intel Xeon E7-8890 v2
# hw_disk        = 46 GB  add more disk info here
# hw_memory001   = 3912.714 GB fixme: If using DDR3, format is:
# hw_memory002   = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)'
# hw_nchips      = 32
# prepared_by    = root  (is never output, only tags rawfile)
# sw_file        = ext3
# sw_os001       = SUSE Linux Enterprise Server 11 (x86_64)
# sw_os002       = 3.0.101-0.46-default
# sw_state       = Run level 3 (add definition here)


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
notes_000 =372.smithwa (base): "redundant" src.alt was used.
notes_005 =
notes_plat_form_000=Intel Hyperthreading set to Disabled
notes_plat_form_005=BT Mode set to Auto-select