# Invocation command line:
# /net/energyvmhost.uits.iu.edu/var/lib/libvirt/slash_usr_extension_dir/local/energy_measurement/OMP2012-vm/bin/runspec --config=pgi --flagsurl pgi2013_linux_flags.xml --reportable all
# output_root was not used for this run
############################################################################
#
# Power and temperature meter configuration
#
power          = yes
power_analyzer = 156.56.24.123:8888
voltage_range  = 130
idle_current_range = 2.5
current_range  = 5.0
temp_meter     = 156.56.24.123:8889
mean_anyway    = 1

hw_psu_info = Dell Z750P-00
hw_psu = 1 x 750 W
hw_power_15656241238888_label       = Power Analyzer
hw_power_15656241238888_vendor      = ZES Zimmer
hw_power_15656241238888_model       = LMG450
hw_power_15656241238888_serial      = 11911308
hw_power_15656241238888_connection  = RS232 via USB-adapter
hw_power_15656241238888_met_inst    = PTB (Physikalisch Technische Bundesanstalt)
hw_power_15656241238888_cal_org     = ZES Zimmer
hw_power_15656241238888_cal_label   = 0431191001
hw_power_15656241238888_cal_date    = 08.26.2013
hw_power_15656241238888_setup       = --

hw_temperature_15656241238889_label       = Temperature Meter
hw_temperature_15656241238889_vendor      = Digi
hw_temperature_15656241238889_model       = Watchport/H
hw_temperature_15656241238889_connection  = USB
hw_temperature_15656241238889_setup       = positioned in front of intake fan

#
######################### Machine #############################
#
company_name    = Indiana University
test_sponsor    = Indiana University
tester          = Indiana University
license_num     = 3440A
machine_name    =
prepared_by     = Huian Li

hw_vendor       = Dell
hw_avail        = Jun-2010
hw_cpu_mhz      = 2200
hw_cpu_max_mhz  = 2200
#hw_cpu_char     = AMD Turbo CORE Technology up to 3.4GHz, Turbo CORE off
hw_disk         = 960 GB SATA 7200 RPM, RAID 5
hw_fpu          = Integrated
hw_memory000    = 32 GB (8 x 4 GB 2Rx4 PC2-6400R-6, ECC)
hw_model        = Dell PowerEdge 2970 (KVM virtual machine)
hw_ncpu         = 8 cores, 2 chips, 4 cores/chip
hw_ncpuorder    = 1-2 chips
hw_nchips       = 2
hw_ncores       = 8
hw_ncoresperchip= 4
hw_nthreadspercore = 1
hw_other        = None
hw_ocache       = None
hw_pcache       = 64 KB I + 64 KB D on chip per core
hw_scache       = 512 KB I+D on chip per core
hw_tcache       = 6 MB I+D on chip per chip

sw_avail        = Mar-2014
sw_compiler     = C/C++/Fortran: Version 14.3 of the PGI Compilers
sw_file         = ext4
sw_os000        = Red Hat Enterprise Linux Server release 6.5
sw_os001 = (Santiago) Kernel 2.6.32-431.3.1.el6.x86_64
sw_os001        = Kernel 2.6.32-431.3.1.el6.x86_64
sw_other        = None
sw_state        = Multi-user, run level 3
sw_base_ptrsize = 64-bit

############################################################################
#
# Global options for runspec
#
############################################################################

action		=	validate
iterations	=	3
output_format	=	all
mean_anyway	=	1
tune            =       base
size            =       ref
ext		=	intel64
env_vars	=	1

strict_rundir_verify = 0

default=default=default=default:
#
# Compiler commands
#
CC=pgcc
CXX=pgCC
FC=pgfortran
F77=pgfortran

#
# Compiler flags for base level optimisation
#
COPTIMIZE = -fast -mp -Mipa=fast,inline -Msmartalloc=huge -Mfprelaxed
CXXOPTIMIZE = -fast -mp -Mipa=fast,inline -Msmartalloc=huge -Mfprelaxed
FOPTIMIZE = -fast -mp -Mipa=fast,inline -Msmartalloc=huge -Mfprelaxed

#
# Base level environment commands
#
notes_000       = VM Configuration details:
notes_005 =      1 VM for OMP2012 with 8 VCPUS and 28 GB memory
notes_010 =      Only one VM per node
notes_015 =      Host and guest OS installed using default parameters
notes_020 =      KVM installed using default parameters
notes_025 = Environment:
notes_030 =      ENV_OMP_NESTED=FALSE
notes_035 =      OMP_NESTED=FALSE
notes_040 =      ENV_OMP_DYNAMIC=FALSE
notes_045 =      ENV_OMP_NUM_THREADS=8
ENV_OMP_NESTED=FALSE
OMP_NESTED=FALSE
ENV_OMP_DYNAMIC=FALSE
ENV_OMP_NUM_THREADS=8
threads = 8
#MP_BIND=yes

#
# Portability flags for each benchmark
#
350.md=default=default=default:
FPORTABILITY = -Mfree

357.bt331=default=default=default:
PORTABILITY = -mcmodel=medium -Bdynamic

363.swim=default=default=default:
PORTABILITY = -mcmodel=medium -Bdynamic

351.bwaves=default=default=default:

360.ilbdc=default=default=default:

367.imagick=default=default=default:

370.mgrid331=default=default=default:

371.applu331=default=default=default:


# The following settings were obtained by running 'specperl $[top]/Docs/sysinfo'
default:
notes_plat_sysinfo_000 = Sysinfo program
notes_plat_sysinfo_005 = /net/energyvmhost.uits.iu.edu/var/lib/libvirt/slash_usr_extension_dir/local/energy_measurement/OMP2012-vm/Docs/sysinfo
notes_plat_sysinfo_010 = $Rev: 395 $ $Date:: 2012-07-25 #$ 8f8c0fe9e19c658963a1e67685e50647
notes_plat_sysinfo_015 = running on energyvm.uits.iu.edu Fri Apr 11 16:54:17 2014
notes_plat_sysinfo_020 =
notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_030 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_035 =   http://www.spec.org/omp2012/Docs/config.html#sysinfo
notes_plat_sysinfo_040 =
notes_plat_sysinfo_045 = From /proc/cpuinfo
notes_plat_sysinfo_050 =    model name : AMD Opteron 23xx (Gen 3 Class Opteron)
notes_plat_sysinfo_055 = *
notes_plat_sysinfo_060 = * 0 "physical id" tags found.  Perhaps this is an older system,
notes_plat_sysinfo_065 = * or a virtualized system.  Not attempting to guess how to
notes_plat_sysinfo_070 = * count chips/cores for this system.
notes_plat_sysinfo_075 = *
notes_plat_sysinfo_080 =       8 "processors"
notes_plat_sysinfo_085 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_090 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_095 =    caution.)
notes_plat_sysinfo_100 =    cache size : 512 KB
notes_plat_sysinfo_105 =
notes_plat_sysinfo_110 = From /proc/meminfo
notes_plat_sysinfo_115 =    MemTotal:       28742712 kB
notes_plat_sysinfo_120 =    HugePages_Total:       0
notes_plat_sysinfo_125 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_130 =
notes_plat_sysinfo_135 = /usr/bin/lsb_release -d
notes_plat_sysinfo_140 =    Red Hat Enterprise Linux Server release 6.5 (Santiago)
notes_plat_sysinfo_145 =
notes_plat_sysinfo_150 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_155 =    redhat-release: Red Hat Enterprise Linux Server release 6.5 (Santiago)
notes_plat_sysinfo_160 =    system-release: Red Hat Enterprise Linux Server release 6.5 (Santiago)
notes_plat_sysinfo_165 =    system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server
notes_plat_sysinfo_170 =
notes_plat_sysinfo_175 = uname -a:
notes_plat_sysinfo_180 =    Linux energyvm.uits.iu.edu 2.6.32-431.5.1.el6.x86_64 #1 SMP Fri Jan 10
notes_plat_sysinfo_185 =    14:46:43 EST 2014 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_190 =
notes_plat_sysinfo_195 = run-level 3 Apr 10 15:14
notes_plat_sysinfo_200 =
notes_plat_sysinfo_205 = SPEC is set to:
notes_plat_sysinfo_210 = /net/energyvmhost.uits.iu.edu/var/lib/libvirt/slash_usr_extension_dir/local/energy_measurement/OMP2012-vm
notes_plat_sysinfo_215 =    Filesystem
notes_plat_sysinfo_220 =    Type  Size  Used Avail Use% Mounted on
notes_plat_sysinfo_225 =    energyvmhost.uits.iu.edu:/var/lib/libvirt/slash_usr_extension_dir/local/energy_measurement nfs   704G  445G  224G  67% /net/energyvmhost.uits.iu.edu/var/lib/libvirt/slash_usr_extension_dir/local/energy_measurement
notes_plat_sysinfo_230 =
notes_plat_sysinfo_235 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode'
notes_plat_sysinfo_240 =
notes_plat_sysinfo_245 = (End of data from sysinfo program)
hw_cpu_name    = Quad-Core AMD Opteron 2374 HE
hw_disk        = 704 GB (SATA 7200 RPM, RAID 5)
hw_nchips      = 2
prepared_by    = huili  (is never output, only tags rawfile)
sw_file        = ext4; KVM ext4
sw_os002       = KVM Kernel 2.6.32-431.3.1.el6.x86_64
sw_os003 = KVM version: qemu-kvm.x86_64
sw_os004       = 2:0.12.1.2-2.415.el6_5.3
sw_state       = Multi-user, run level 3


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = http://www.spec.org/omp2012/flags/pgi2013_linux_flags.xml
sw_peak_ptrsize = Not Applicable