# Invocation command line:
# /opt/omp2012/bin/runspec --config=omp2012.cfg --define half=24 --tune=all --reportable --iterations=3 --flagsurl /opt/omp2012/config/flags/Intel-ic13.0-linux64.xml --threads=48 --size=ref all
# output_root was not used for this run
############################################################################
# Invocation command line:
# /panfs/panfs3/users1/aknyaze1/OMP2012/bin/runspec --config=Intel64-omp2012_IVB-SMT.cfg --define half=24 --tune=all --reportable --iterations=3 --flagsurl /panfs/panfs3/users1/aknyaze1/OMP2012/config/flags/Intel-ic13.0-linux64.xml --threads=48 --size=ref all
# output_root was not used for this run
############################################################################

############################################################################
#
# Intel64-omp2012_IVB-SMT.cfg
#
VENDOR        = intel
action        = validate
ext           = ivb-smt
PATHSEP       = /

check_md5     = 1
env_vars      = 1
iterations    = 3
level         = 40
output_format = config,asc
backup_config = 0
sysinfo_program = $[top]/Docs/sysinfo -f

#
# These are listed as benchmark-tuning-extension-machine
#
default=default=default=default:
CC   = icc
FC   = ifort
CXX  = icpc
OBJ  = .o
#
# portability & libraries
#
default=default=default=default:
ENV_KMP_LIBRARY=turnaround
ENV_KMP_BLOCKTIME=infinite
ENV_KMP_STACKSIZE=190M
ENV_OMP_DYNAMIC=FALSE
ENV_OMP_NESTED=FALSE

350.md=default=default=default:
FPORTABILITY  = -FR

367.imagick=default=default=default:
CPORTABILITY  = -std=c99

357.bt331=default=default=default:
PORTABILITY   = -mcmodel=medium

363.swim=default=default=default:
PORTABILITY   = -mcmodel=medium

default=default=default=default:

notes_000     = Transparent Huge Pages enabled with:
notes_005     = echo never > /sys/kernel/mm/transparent_hugepage/enabled
notes_010     = Filesystem page cache cleared with:
notes_015     = echo 1>       /proc/sys/vm/drop_caches

notes_020     = CPU Performance set to HPC
notes_025     = Power Technology set to Custom
notes_030     = Processor Power State C6 set to Enabled
notes_035     = Processor Power State C1 Enhanced set to Disabled
notes_040     = Energy Performance set to Performance
notes_045     = Memory RAS configuration set to Maximum Performance
notes_050     = DRAM Clock Throttling Set to Balanced
#notes110      =   OpenMP Library Runtime=%{omprt}
notes_055     = Low Voltage DDR Mode set to Performance-mode

################################################################
# Base tuning default optimization                             #
################################################################

default=base=default=default:
OPTIMIZE=-O2 -openmp -ipo -xAVX
COPTIMIZE=-ansi-alias
CXXOPTIMIZE=-ansi-alias
FOPTIMIZE=-align array64byte
ENV_KMP_AFFINITY=compact,0
notes_060     = DRAM Refresh Rate set to 1x
notes_065     = General base OMP Library Settings
notes_070     = ENV_KMP_AFFINITY=compact,0
notes_075     = ENV_KMP_LIBRARY=turnaround

################################################################
# Peak tuning default optimization                             #
################################################################
default=peak=default=default:
OPTIMIZE=-O3 -openmp -ipo -xAVX -fno-alias
COPTIMIZE=-ansi-alias
CXXOPTIMIZE=-ansi-alias
FOPTIMIZE=-align array64byte
ENV_KMP_AFFINITY=compact,0
notes_080      = ENV_KMP_BLOCKTIME=infinite
notes_085      = ENV_KMP_STACKSIZE=190M
notes_090      = ENV_OMP_DYNAMIC=FALSE
notes_095      = ENV_OMP_NESTED=FALSE

default=default=default=default:
notes_100      = ========================================================================
notes_105      = Per benchmark peak OMP Library Settings
notes_110      =
notes_115               =
notes_120               = Submitted_by: "Paul Del Vecchio" <pdelvecc@cisco.com>
notes_125               = Submitted: Wed Sep 10 22:35:41 PST 2013

350.md=peak=default=default:
OPTIMIZE=-O2 -openmp -ipo -xAVX -fno-alias -opt-malloc-options=1
FOPTIMIZE=-fp-model fast=2 -no-prec-div -no-prec-sqrt -align array64byte

351.bwaves=peak=default=default:
FOPTIMIZE=-fp-model fast=2 -no-prec-div -no-prec-sqrt -align array64byte
ENV_KMP_AFFINITY=compact,1
ENV_OMP_SCHEDULE=static,1
threads=%{half}
notes_1351_000 = ========================================================================
notes_1351_005 = 351.bwaves:peak:
notes_1351_010 = ENV_KMP_AFFINITY=compact,1
notes_1351_015 = ENV_OMP_SCHEDULE=static,1

352.nab=peak=default=default:
OPTIMIZE=-O3 -openmp -ipo -xAVX -fno-alias -opt-malloc-options=1 -opt-calloc -fp-model fast=2 -no-prec-div -no-prec-sqrt

357.bt331=peak=default=default:
ENV_OMP_SCHEDULE=static,1
FOPTIMIZE=-fp-model fast=2 -no-prec-div -no-prec-sqrt -align array64byte

358.botsalgn=peak=default=default:
OPTIMIZE=-O3 -openmp -ipo -xSSE4.2 -fno-alias

359.botsspar=peak=default=default:
ENV_KMP_AFFINITY=compact,1
ENV_OMP_SCHEDULE=guided
threads=%{half}
notes_1359_000 = ========================================================================
notes_1359_005 = 359.botsspar:peak:
notes_1359_015 = ENV_OMP_SCHEDULE=guided

360.ilbdc=peak=default=default:
OPTIMIZE=-O3 -openmp -ipo -xAVX -opt-malloc-options=1

362.fma3d=peak=default=default:
ENV_OMP_SCHEDULE=static,1
notes_1362_000 = ========================================================================
notes_1359_010 = ENV_KMP_AFFINITY=compact,1
notes_1362_005 = 362.fma3d:peak:
notes_1362_010 = ENV_OMP_SCHEDULE=static,1
#OPTIMIZE=-O3 -openmp -ipo -xAVX -fno-alias -no-prec-div -no-prec-sqrt
#ENV_KMP_AFFINITY=scatter

363.swim=peak=default=default:
OPTIMIZE=-O3 -openmp -ipo -xSSE4.2 -fno-alias -opt-streaming-stores always -opt-malloc-options=3
ENV_KMP_AFFINITY=compact,1
threads=%{half}
notes_1363_000 = ========================================================================
notes_1363_005 = 363.swim:peak:
notes_1363_010 = ENV_KMP_AFFINITY=compact,1

367.imagick=peak=default=default:
OPTIMIZE=-O2 -openmp -ipo -xAVX

370.mgrid331=peak=default=default:
OPTIMIZE=-O2 -openmp -ipo -xSSE4.2 -fno-alias -opt-malloc-options=3
ENV_KMP_AFFINITY=compact,1
threads=%{half}

371.applu331=peak=default=default:
OPTIMIZE=-O2 -openmp -ipo -xAVX
#ENV_KMP_AFFINITY=compact,1
#threads=%{half}
#notes1371_1    = ========================================================================
#notes1371_2    = 371.applu331:peak:
#notes1371_4    =   ENV_KMP_AFFINITY=compact,1
#notes1371_6    =

372.smithwa=peak=default=default:
OPTIMIZE=-O2 -openmp -ipo -xSSE4.2 -fno-alias -opt-streaming-stores always -opt-malloc-options=1
ENV_KMP_AFFINITY=compact,1
ENV_OMP_SCHEDULE=static,1
threads=%{half}
notes_1372_000 = ========================================================================
notes_1372_005 = 372.smithwa:peak:
notes_1372_010 = ENV_KMP_AFFINITY=compact,1
notes_1372_015 =

#376.kdtree=peak=default=default:

default=default=default=default:
hw_cpu_name=Intel Xeon E5-2697 v2
hw_cpu_char = Intel Turbo Boost Technology up to 3.5 GHz
hw_cpu_mhz = 2700
hw_cpu_max_mhz = 3500
hw_model000= Cisco UCS C240 M3 (Intel Xeon E5-2697 v2 @ 2.70
hw_model001 = GHz)
hw_memory = 128 GB (16 x 8 GB 2Rx4 PC3-14900R-11, ECC)
hw_fpu = Integrated
hw_nchips = 2
hw_ncores = 24
hw_ncoresperchip = 12
hw_nthreadspercore = 2
hw_ncpuorder = 1,2 chips
hw_vendor = Cisco Systems
sw_compiler000=C/C++/Fortran = Version 13.1.3 of Intel Composer
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 256 KB I+D on chip per core
hw_tcache = 30 MB I+D on chip per chip
hw_ocache = None
hw_disk   =1 X 300GB SAS, 15K RPM
hw_other = --
sw_os=SUSE Linux Enterprise Server 11 SP3 (x86_64)
sw_base_ptrsize=64-bit
sw_peak_ptrsize=64-bit
sw_other = Kernel 3.0.76-0.11-default
sw_file=ext3
sw_state=Default
company_name=Intel Corporation
machine_name=Endeavour
license_num=9019
test_sponsor = Cisco Systems
tester = Cisco Systems
hw_avail=Sep-2013
sw_avail=Aug-2013
prepared_by=Paul Del Vecchio<pdelvecc@cisco.com>


# The following settings were obtained by running '$[top]/Docs/sysinfo -f'
default:
notes_plat_sysinfo_000 = Sysinfo program /panfs/panfs3/users1/aknyaze1/OMP2012/Docs/sysinfo
notes_plat_sysinfo_005 = $Rev: 395 $ $Date:: 2012-07-25 #$ 8f8c0fe9e19c658963a1e67685e50647
notes_plat_sysinfo_010 = running on esg007 Mon Aug 19 00:52:51 2013
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_025 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_030 =   http://www.spec.org/omp2012/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 =    model name : Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz
notes_plat_sysinfo_050 =       2 "physical id"s (chips)
notes_plat_sysinfo_055 =       48 "processors"
notes_plat_sysinfo_060 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_065 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_070 =    caution.)
notes_plat_sysinfo_075 =       cpu cores : 12
notes_plat_sysinfo_080 =       siblings  : 24
notes_plat_sysinfo_085 =       physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13
notes_plat_sysinfo_090 =       physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13
notes_plat_sysinfo_095 =    cache size : 30720 KB
notes_plat_sysinfo_100 =
notes_plat_sysinfo_105 = From /proc/meminfo
notes_plat_sysinfo_110 =    MemTotal:       65865132 kB
notes_plat_sysinfo_115 =    HugePages_Total:       0
notes_plat_sysinfo_120 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_125 =
notes_plat_sysinfo_130 = /usr/bin/lsb_release -d
notes_plat_sysinfo_135 =    Red Hat Enterprise Linux Server release 6.4 (Santiago)
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    redhat-release: Red Hat Enterprise Linux Server release 6.4 (Santiago)
notes_plat_sysinfo_155 =    system-release: Red Hat Enterprise Linux Server release 6.4 (Santiago)
notes_plat_sysinfo_160 =    system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server
notes_plat_sysinfo_165 =
notes_plat_sysinfo_170 = uname -a:
notes_plat_sysinfo_175 =    Linux esg007 2.6.32-358.6.2.el6.x86_64.crt1 #4 SMP Fri May 17 15:33:33 MDT
notes_plat_sysinfo_180 =    2013 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_185 =
notes_plat_sysinfo_190 = run-level 3 Aug 16 15:51
notes_plat_sysinfo_195 =
notes_plat_sysinfo_200 = SPEC is set to: /panfs/panfs3/users1/aknyaze1/OMP2012
notes_plat_sysinfo_205 =    Filesystem    Type    Size  Used Avail Use% Mounted on
notes_plat_sysinfo_210 =    panfs://36.101.211.1/users1
notes_plat_sysinfo_215 =                 panfs     76T   11T   66T  14% /panfs/panfs3/users1
notes_plat_sysinfo_220 =
notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode'
notes_plat_sysinfo_230 =
notes_plat_sysinfo_235 = (End of data from sysinfo program)
# hw_cpu_name    = Intel Xeon E5-2697 v2
# hw_disk        = 76 TB  add more disk info here
# hw_memory001   = 62.814 GB fixme: If using DDR3, format is:
# hw_memory002   = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)'
# hw_nchips      = 2
# prepared_by    = aknyaze1  (is never output, only tags rawfile)
# sw_file        = panfs
# sw_os001       = Red Hat Enterprise Linux Server release 6.4 (Santiago)
# sw_os002       = 2.6.32-358.6.2.el6.x86_64.crt1
# sw_state       = Run level 3 (add definition here)


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
#flagsurl000 = https://pro.spec.org/private/hpg/submit/omp2012/flags/Intel-ic13.0-linux64.20130820.xml


# The following settings were obtained by running '$[top]/Docs/sysinfo -f'
default:
notes_plat_sysinfo_000 = Sysinfo program /opt/omp2012/Docs/sysinfo
notes_plat_sysinfo_005 = $Rev: 395 $ $Date:: 2012-07-25 #$
notes_plat_sysinfo_010 = 8f8c0fe9e19c658963a1e67685e50647
notes_plat_sysinfo_015 = running on ompsles11sp3 Mon Sep  9 22:25:17 2013
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info
notes_plat_sysinfo_025 = as seen by some common utilities. To remove or add
notes_plat_sysinfo_030 = to this section, see:
notes_plat_sysinfo_035 = http://www.spec.org/omp2012/Docs/config.html#sysinfo
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz
notes_plat_sysinfo_050 = 2 "physical id"s (chips)
notes_plat_sysinfo_055 = 48 "processors" cores, siblings (Caution: counting
notes_plat_sysinfo_060 = these is hw and        system dependent.  The
notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be
notes_plat_sysinfo_070 = reliable.  Use with caution.)
notes_plat_sysinfo_075 = cpu cores : 12
notes_plat_sysinfo_080 = siblings  : 24
notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13
notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13
notes_plat_sysinfo_095 = cache size : 30720 KB
notes_plat_sysinfo_100 = From /proc/meminfo
notes_plat_sysinfo_105 = MemTotal:  132132848 kB
notes_plat_sysinfo_110 = HugePages_Total:       0
notes_plat_sysinfo_115 = Hugepagesize:       2048 kB
notes_plat_sysinfo_120 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_125 =SuSE-release: SUSE Linux Enterprise Server 11
notes_plat_sysinfo_130 =VERSION = 11
notes_plat_sysinfo_135 =PATCHLEVEL = 3
notes_plat_sysinfo_140 = uname -a:
notes_plat_sysinfo_145 = Linux ompsles11sp3 3.0.76-0.11-default #1 SMP Fri
notes_plat_sysinfo_150 = Jun 14 08:21:43 UTC 2013
notes_plat_sysinfo_155 = (ccab990) x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_160 = run-level 2 Sep 9 22:24 last=S
notes_plat_sysinfo_165 = SPEC is set to: /opt/omp2012
notes_plat_sysinfo_170 = Filesystem  Type  Size  Used Avail Use% Mounted on
notes_plat_sysinfo_175 = /dev/sda1   ext3  275G   17G  245G   7%  /
notes_plat_sysinfo_180 = Additional information from dmidecode:
notes_plat_sysinfo_185 = BIOS Cisco Systems, Inc. C240M3.1.5.3.0.081520130943 08/15/2013
notes_plat_sysinfo_190 = Memory:
notes_plat_sysinfo_195 = 16x 0xAD00 HMT31GR7EFR4C-RD 8 GB 1866 MHz
notes_plat_sysinfo_200 = 8x NO DIMM NO DIMM
notes_plat_sysinfo_205 = (End of data from sysinfo program)
# hw_cpu_name    = Intel Xeon E5-2697 v2
# hw_disk        = 275 GB  add more disk info here
# hw_memory001   = 126.012 GB fixme: If using DDR3, format is:
# hw_memory002   = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)'
# hw_nchips      = 2
# prepared_by    = root  (is never output, only tags rawfile)
# sw_file        = ext3
# sw_os001       = SUSE Linux Enterprise Server 11 (x86_64)
# sw_os002       = 3.0.76-0.11-default
# sw_state       = Run level 2 (add definition here)


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = http://www.spec.org/omp2012/flags/Intel-ic13.0-linux64.20130910.xml
sw_compiler000 = C/C++/Fortran: Version 13.1.3 of Intel Composer
sw_compiler001 = XE for Linux Build 20130607