# Invocation command line:
# /panfs/panfs3/users2/pshelepu/kit47/bin/runspec --reportable --device CPU --config haswell.cfg --flagsurl EM64T_Intel150_flags.xml -T base,peak opencl
# output_root was not used for this run
############################################################################
output_format = txt
env_vars = 1

default=default=default=default:
CC           = icc
CXX          = icpc

submit = numactl --interleave=all $command

OPTIMIZE = -O3 -xCORE-AVX2
EXTRA_LIBS = -lintelocl

101.tpacf=peak=default=default:
basepeak = yes

103.stencil=peak=default=default:
basepeak = yes

104.lbm=peak=default=default:
basepeak = yes

110.fft=peak=default=default:
basepeak = yes

112.spmv=peak=default=default:
basepeak = yes

114.mriq=peak=default=default:
basepeak = yes

116.histo=peak=default=default:
ENV_CL_CONFIG_CPU_VECTORIZER_MODE=8

117.bfs=peak=default=default:
ENV_CL_CONFIG_CPU_VECTORIZER_MODE=4

118.cutcp=peak=default=default:
ENV_CL_CONFIG_CPU_RT_LOOP_UNROLL=16

120.kmeans=peak=default=default:
basepeak = yes

121.lavamd=peak=default=default:
ENV_CL_CONFIG_USE_FAST_RELAXED_MATH=1

122.cfd=peak=default=default:
basepeak = yes

123.nw=peak=default=default:
OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=32

124.hotspot=peak=default=default:
OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=40

125.lud=peak=default=default:
OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=32

126.ge=peak=default=default:
basepeak = yes

127.srad=peak=default=default:
basepeak = yes

128.heartwall=peak=default=default:
basepeak = yes

140.bplustree=peak=default=default:
basepeak = yes


# The following settings were obtained by running 'specperl $[top]/Docs/sysinfo'
default:
notes_plat_sysinfo_000 = Sysinfo program /panfs/panfs3/users2/pshelepu/kit47/Docs/sysinfo
notes_plat_sysinfo_005 = $Rev: 6874 $ $Date:: 2013-11-20 #$ 0953404ef7e75a5f9bbb534c6de3f831
notes_plat_sysinfo_010 = running on ehk288 Tue Feb 24 02:18:44 2015
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_025 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_030 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 =    model name : Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz
notes_plat_sysinfo_050 =       2 "physical id"s (chips)
notes_plat_sysinfo_055 =       56 "processors"
notes_plat_sysinfo_060 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_065 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_070 =    caution.)
notes_plat_sysinfo_075 =       cpu cores : 14
notes_plat_sysinfo_080 =       siblings  : 28
notes_plat_sysinfo_085 =       physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14
notes_plat_sysinfo_090 =       physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14
notes_plat_sysinfo_095 =    cache size : 35840 KB
notes_plat_sysinfo_100 =
notes_plat_sysinfo_105 = From /proc/meminfo
notes_plat_sysinfo_110 =    MemTotal:       65860360 kB
notes_plat_sysinfo_115 =    HugePages_Total:       0
notes_plat_sysinfo_120 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_125 =
notes_plat_sysinfo_130 = /usr/bin/lsb_release -d
notes_plat_sysinfo_135 =    Red Hat Enterprise Linux Server release 6.5 (Santiago)
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    redhat-release: Red Hat Enterprise Linux Server release 6.5 (Santiago)
notes_plat_sysinfo_155 =    system-release: Red Hat Enterprise Linux Server release 6.5 (Santiago)
notes_plat_sysinfo_160 =    system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server
notes_plat_sysinfo_165 =
notes_plat_sysinfo_170 = uname -a:
notes_plat_sysinfo_175 =    Linux ehk288 2.6.32-358.6.2.el6.x86_64.crt1 #4 SMP Fri May 17 15:33:33 MDT
notes_plat_sysinfo_180 =    2013 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_185 =
notes_plat_sysinfo_190 = run-level 3 Feb 19 10:17
notes_plat_sysinfo_195 =
notes_plat_sysinfo_200 = SPEC is set to: /panfs/panfs3/users2/pshelepu/kit47
notes_plat_sysinfo_205 =    Filesystem           Type   Size  Used Avail Use% Mounted on
notes_plat_sysinfo_210 =    panfs://36.101.211.31/users2
notes_plat_sysinfo_215 =                         panfs   76T   49T   28T  65% /panfs/panfs3/users2
notes_plat_sysinfo_220 =
notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode'
notes_plat_sysinfo_230 =
notes_plat_sysinfo_235 = (End of data from sysinfo program)
hw_cpu_name    = Intel Xeon E5-2697 v3
hw_disk        = 76 TB  add more disk info here
hw_memory000   = 62.809 GB fixme: If using DDR3, format is:
hw_memory001   = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)'
hw_nchips      = 2
prepared_by    = pshelepu  (is never output, only tags rawfile)
sw_file        = panfs
sw_os000       = Red Hat Enterprise Linux Server release 6.5
sw_os001 = (Santiago)
sw_os002       = 2.6.32-358.6.2.el6.x86_64.crt1
sw_state       = Run level 3 (add definition here)


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = EM64T_Intel150_flags.xml

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = EM64T_Intel150_flags.xml
hw_cpu_name = Intel Xeon E5-2697 v3
hw_cpu_mhz = 2600
hw_cpu_max_mhz = 3600
hw_fpu = Integrated
hw_ncpuorder = 1-2 chips
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 256 KB I+D on chip per core
hw_ocache = None
hw_disk = Panasas ActiveStor 12, PanFS 6.0
hw_other = None
hw_accel_model = Intel Xeon E5-2697 v3
hw_accel_vendor = Intel
hw_accel_name = Intel Xeon E5-2697 v3
hw_accel_type = CPU
hw_accel_connect = 9.6 GT/s QPI
hw_accel_ecc = yes
hw_accel_desc = 2x Intel Xeon E5-2697 v3 CPUs with Hyper-Threading
sw_accel_driver = None
sw_file = panfs
sw_state = Run level 3 (multi-user)
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = Not Applicable
sw_other = Intel OpenCL SDK 2015 Version 15.1 Build 5.0.0.57
test_sponsor = Intel Corporation
license_num = 13
tester = Pavel Shelepugin, Alexander Bobyr
hw_avail = Sep-2014
sw_avail = Feb-2015
prepared_by = pshelepu  (is never output, only tags rawfile)
hw_vendor = Intel
hw_model = R2208WTTYC1
sw_parallel_other = No
hw_nthreadspercore = 2
hw_ncoresperchip = 14
hw_ncores = 28
hw_nchips = 2
hw_cpu_char000 = Intel Turbo Boost Technology up to 3.6 GHz,
hw_cpu_char001 = 9.6 GT/s QPI, Hyper-Threading enabled
hw_memory000 = 64 GB (8 x 8 GB 2Rx4 PC4-17000R-15, ECC)
hw_tcache000 = 35 MB I+D on chip per chip, 35 MB
hw_tcache001 = shared / 14 cores
sw_compiler000 = Intel C++ Composer XE 2015 for Linux,
sw_compiler001 = Version 15.0.1.133 Build 20141023
sw_os000 = Red Hat Enterprise Linux Server
sw_os001 = release 6.5 (Santiago)
sw_os002 = 2.6.32-358.6.2.el6.x86_64.crt1
notes_plat_sysinfo_000 = Sysinfo program /panfs/panfs3/users2/pshelepu/kit47/Docs/sysinfo
notes_plat_sysinfo_005 = $Rev: 6874 $ $Date:: 2013-11-20 #$ 0953404ef7e75a5f9bbb534c6de3f831
notes_plat_sysinfo_010 = running on ehk288 Tue Feb 24 02:18:44 2015
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_025 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_030 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 =    model name : Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz
notes_plat_sysinfo_050 =       2 "physical id"s (chips)
notes_plat_sysinfo_055 =       56 "processors"
notes_plat_sysinfo_060 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_065 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_070 =    caution.)
notes_plat_sysinfo_075 =       cpu cores : 14
notes_plat_sysinfo_080 =       siblings  : 28
notes_plat_sysinfo_085 =       physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14
notes_plat_sysinfo_090 =       physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14
notes_plat_sysinfo_095 =    cache size : 35840 KB
notes_plat_sysinfo_100 =
notes_plat_sysinfo_105 = From /proc/meminfo
notes_plat_sysinfo_110 =    MemTotal:       65860360 kB
notes_plat_sysinfo_115 =    HugePages_Total:       0
notes_plat_sysinfo_120 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_125 =
notes_plat_sysinfo_130 = /usr/bin/lsb_release -d
notes_plat_sysinfo_135 =    Red Hat Enterprise Linux Server release 6.5 (Santiago)
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    redhat-release: Red Hat Enterprise Linux Server release 6.5 (Santiago)
notes_plat_sysinfo_155 =    system-release: Red Hat Enterprise Linux Server release 6.5 (Santiago)
notes_plat_sysinfo_160 =    system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server
notes_plat_sysinfo_165 =
notes_plat_sysinfo_170 = uname -a:
notes_plat_sysinfo_175 =    Linux ehk288 2.6.32-358.6.2.el6.x86_64.crt1 #4 SMP Fri May 17 15:33:33 MDT
notes_plat_sysinfo_180 =    2013 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_185 =
notes_plat_sysinfo_190 = run-level 3 Feb 19 10:17
notes_plat_sysinfo_195 =
notes_plat_sysinfo_200 = SPEC is set to: /panfs/panfs3/users2/pshelepu/kit47
notes_plat_sysinfo_205 =    Filesystem           Type   Size  Used Avail Use% Mounted on
notes_plat_sysinfo_210 =    panfs://36.101.211.31/users2
notes_plat_sysinfo_215 =                         panfs   76T   49T   28T  65% /panfs/panfs3/users2
notes_plat_sysinfo_220 =
notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode'
notes_plat_sysinfo_230 =
notes_plat_sysinfo_235 = (End of data from sysinfo program)
notes_peak_000 = The following compiler environment variables were used for the Peak run:
notes_peak_005 = (the description can be found in the flags file)
notes_peak_010 =  CL_CONFIG_CPU_VECTORIZER_MODE=8 for 116.histo
notes_peak_015 =  CL_CONFIG_CPU_VECTORIZER_MODE=4 for 117.bfs
notes_peak_020 =  CL_CONFIG_CPU_RT_LOOP_UNROLL=16 for 118.cutcp
notes_peak_025 =  CL_CONFIG_USE_FAST_RELAXED_MATH=1 for 121.lavamd
notes_submit_000 ='numactl' utility was used for 'submit' option.

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = http://www.spec.org/accel/flags/EM64T_Intel150_flags.xml
hw_cpu_name = Intel Xeon E5-2697 v3
hw_cpu_mhz = 2600
hw_cpu_max_mhz = 3600
hw_fpu = Integrated
hw_ncpuorder = 1-2 chips
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 256 KB I+D on chip per core
hw_ocache = None
hw_disk = Panasas ActiveStor 12, PanFS 6.0
hw_other = None
hw_accel_model = Intel Xeon E5-2697 v3
hw_accel_vendor = Intel
hw_accel_name = Intel Xeon E5-2697 v3
hw_accel_type = CPU
hw_accel_connect = 9.6 GT/s QPI
hw_accel_ecc = yes
hw_accel_desc = 2x Intel Xeon E5-2697 v3 CPUs with Hyper-Threading
sw_accel_driver = None
sw_file = panfs
sw_state = Run level 3 (multi-user)
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = Not Applicable
sw_other = Intel OpenCL SDK 2015 Version 15.1 Build 5.0.0.57
test_sponsor = Intel Corporation
license_num = 13
tester = Pavel Shelepugin, Alexander Bobyr
hw_avail = Sep-2014
sw_avail = Feb-2015
prepared_by = pshelepu  (is never output, only tags rawfile)
hw_vendor = Intel
hw_model = R2208WTTYC1
sw_parallel_other = No
hw_nthreadspercore = 2
hw_ncoresperchip = 14
hw_ncores = 28
hw_nchips = 2
hw_cpu_char000 = Intel Turbo Boost Technology up to 3.6 GHz,
hw_cpu_char001 = 9.6 GT/s QPI, Hyper-Threading enabled
hw_memory000 = 64 GB (8 x 8 GB 2Rx4 PC4-17000R-15, ECC)
hw_tcache000 = 35 MB I+D on chip per chip, 35 MB
hw_tcache001 = shared / 14 cores
sw_compiler000 = Intel C++ Composer XE 2015 for Linux,
sw_compiler001 = Version 15.0.1.133 Build 20141023
sw_os000 = Red Hat Enterprise Linux Server
sw_os001 = release 6.5 (Santiago)
sw_os002 = 2.6.32-358.6.2.el6.x86_64.crt1
notes_plat_sysinfo_000 = Sysinfo program /panfs/panfs3/users2/pshelepu/kit47/Docs/sysinfo
notes_plat_sysinfo_005 = $Rev: 6874 $ $Date:: 2013-11-20 #$ 0953404ef7e75a5f9bbb534c6de3f831
notes_plat_sysinfo_010 = running on ehk288 Tue Feb 24 02:18:44 2015
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_025 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_030 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 =    model name : Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz
notes_plat_sysinfo_050 =       2 "physical id"s (chips)
notes_plat_sysinfo_055 =       56 "processors"
notes_plat_sysinfo_060 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_065 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_070 =    caution.)
notes_plat_sysinfo_075 =       cpu cores : 14
notes_plat_sysinfo_080 =       siblings  : 28
notes_plat_sysinfo_085 =       physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14
notes_plat_sysinfo_090 =       physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14
notes_plat_sysinfo_095 =    cache size : 35840 KB
notes_plat_sysinfo_100 =
notes_plat_sysinfo_105 = From /proc/meminfo
notes_plat_sysinfo_110 =    MemTotal:       65860360 kB
notes_plat_sysinfo_115 =    HugePages_Total:       0
notes_plat_sysinfo_120 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_125 =
notes_plat_sysinfo_130 = /usr/bin/lsb_release -d
notes_plat_sysinfo_135 =    Red Hat Enterprise Linux Server release 6.5 (Santiago)
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    redhat-release: Red Hat Enterprise Linux Server release 6.5 (Santiago)
notes_plat_sysinfo_155 =    system-release: Red Hat Enterprise Linux Server release 6.5 (Santiago)
notes_plat_sysinfo_160 =    system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server
notes_plat_sysinfo_165 =
notes_plat_sysinfo_170 = uname -a:
notes_plat_sysinfo_175 =    Linux ehk288 2.6.32-358.6.2.el6.x86_64.crt1 #4 SMP Fri May 17 15:33:33 MDT
notes_plat_sysinfo_180 =    2013 x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_185 =
notes_plat_sysinfo_190 = run-level 3 Feb 19 10:17
notes_plat_sysinfo_195 =
notes_plat_sysinfo_200 = SPEC is set to: /panfs/panfs3/users2/pshelepu/kit47
notes_plat_sysinfo_205 =    Filesystem           Type   Size  Used Avail Use% Mounted on
notes_plat_sysinfo_210 =    panfs://36.101.211.31/users2
notes_plat_sysinfo_215 =                         panfs   76T   49T   28T  65% /panfs/panfs3/users2
notes_plat_sysinfo_220 =
notes_plat_sysinfo_225 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode'
notes_plat_sysinfo_230 =
notes_plat_sysinfo_235 = (End of data from sysinfo program)
notes_peak_000 = The following compiler environment variables were used for the Peak run:
notes_peak_005 = (the description can be found in the flags file)
notes_peak_010 =  CL_CONFIG_CPU_VECTORIZER_MODE=8 for 116.histo
notes_peak_015 =  CL_CONFIG_CPU_VECTORIZER_MODE=4 for 117.bfs
notes_peak_020 =  CL_CONFIG_CPU_RT_LOOP_UNROLL=16 for 118.cutcp
notes_peak_025 =  CL_CONFIG_USE_FAST_RELAXED_MATH=1 for 121.lavamd
notes_submit_000 ='numactl' utility was used for 'submit' option.