# Invocation command line: # /home/hpc2021/bin/harness/runhpc --config=hpc.cfg --tune=base --reportable --pmodel=OMP --define model=omp --rank=32 --threads=16 --size=ref --iterations=3 small # output_root was not used for this run ############################################################################ # Invocation command line: # output_root was not used for this run ############################################################################ # The following setting was inserted automatically as a result of build_in_build_dir=0 # build in run dir strict_rundir_verify = 1 %ifndef %{label} # IF acctype is not set use mpi % define label Cisco_UCS %endif %ifndef %{model} # IF acctype is not set use mpi % define model mpi %endif teeout = yes makeflags=-j 40 ###################################################################### # The header section of the config file. Must appear # before any instances of "section markers" (see below) # # ext = how the binaries you generated will be identified # tune = specify "base" or "peak" or "all" label = %{label}_%{model} tune = all output_format = text use_submit_for_speed = 1 default: AR = ar ARFLAGS = cr CXX = mpiicpc -cxx=icpx CC = mpiicc -cc=icx FC = mpiifort -fc=ifx system_class = Homogenous # Compiler Version Flags CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version default=base=default: OPTIMIZE = -Ofast -ipo -mprefer-vector-width=512 -march=common-avx512 COPTIMIZE = -ansi-alias CXXOPTIMIZE = -ansi-alias FOPTIMIZE = -nostandard-realloc-lhs -align array64byte PORTABILITY = -lstdc++ mpicmd = mpiexec.hydra -bootstrap ssh -genv OMP_NUM_THREADS $threads -np $ranks -ppn $ranks $command submit = $mpicmd #default=base=default: # ranks = %{RANKS} # threads = %{THREADS} %if %{model} eq 'mpi' pmodel=MPI %endif # OpenACC flags %if %{model} eq 'acc' pmodel=ACC OPTIMIZE += -fopenacc -foffload=-lm %endif # OpenMP (CPU) flags %if %{model} eq 'omp' pmodel=OMP OPTIMIZE += -fiopenmp %endif # OpenMP Targeting host flags %if %{model} eq 'tgt' pmodel=TGT OPTIMIZE += -fopenmp %endif # OpenMP Targeting Nvidia GPU flags %if %{model} eq 'tgtnv' pmodel=TGT OPTIMIZE += -fopenmp -fopenmp-targets=nvptx64-nvidia-cuda %endif # No peak flags set, so make peak use the same flags as base default=peak=default: basepeak=1 513.soma_t=base,peak: PORTABILITY+=-DSPEC_NO_VAR_ARRAY_REDUCE 528.pot3d_t,628.pot3d_s,728.pot3d_m,828.pot3d_l=base,peak: # PORTABILITY+=-DSPEC_NO_REORDER OPTIMIZE+=-Wno-incompatible-function-pointer-types # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = http://www.spec.org/hpc2021/flags/Intel_compiler_flags_hpc.2024.xml sw_other = None sw_mpi_library = Intel MPI Library for Linux OS, Build 20231005 sw_mpi_other = None test_sponsor = Cisco Systems license_num = 9019 showtimer = 0 tester = Cisco Systems hw_avail = Jun-2024 sw_avail = Feb-2024 prepared_by = Cisco Systems system_vendor = Cisco Systems system_name = Cisco UCS C245 M8 (AMD EPYC 9754) hw_vendor_list = Cisco Systems hw_total_accel = 0 hw_model_list = Cisco UCS C245 M8 hw_cpu_name_list = AMD EPYC 9754 hw_accel_vendor_list = None hw_accel_model_list = None node_compute_syslbl = Cisco UCS C245 M8 node_compute_sw_state = Multi-user, run level 3 node_compute_sw_sharedfile = None node_compute_sw_other = None node_compute_sw_localfile = xfs node_compute_purpose = compute node_compute_order = 1 node_compute_hw_vendor = Cisco Systems node_compute_hw_scache = 1 MB I+D on chip per core node_compute_hw_pcache = 32 KB I + 32 KB D on chip per core node_compute_hw_other = None node_compute_hw_ocache = None node_compute_hw_nthreadspercore = 2 node_compute_hw_ncpuorder = 1,2 chips node_compute_hw_ncoresperchip = 128 node_compute_hw_ncores = 256 node_compute_hw_nchips = 2 node_compute_hw_model = Cisco UCS C245 M8 node_compute_hw_memory000= 1536 GB (24 x 64 GB 2Rx4 PC5-5600B-R, node_compute_hw_memory001 = running at 4800 MHz) node_compute_hw_disk = 1 x 960 GB NVMe SSD node_compute_hw_cpu_name = AMD EPYC 9754 node_compute_hw_cpu_mhz = 2250 node_compute_hw_cpu_char = Max. Boost Clock upto 3.1GHz node_compute_hw_adapter_fs_slot_type = None node_compute_hw_adapter_fs_ports_used = 0 node_compute_hw_adapter_fs_model = None node_compute_hw_adapter_fs_interconnect = None node_compute_hw_adapter_fs_firmware = None node_compute_hw_adapter_fs_driver = None node_compute_hw_adapter_fs_data_rate = None node_compute_hw_adapter_fs_count = 0 node_compute_hw_accel_vendor = None node_compute_hw_accel_type = None node_compute_hw_accel_model = None node_compute_hw_accel_ecc = None node_compute_hw_accel_desc = None node_compute_hw_accel_count = 0 node_compute_hw_accel_connect = None node_compute_count = 1 node_compute_hw_tcache000 = 256 MB I+D on chip per chip node_compute_hw_tcache001 = 16 MB shared / 8 cores node_compute_sw_os000 = SUSE Linux Enterprise Server 15 SP5 node_compute_sw_os001 = Kernel 5.14.21-150500.53-default sw_compiler000 = Intel oneAPI DPC++/C++ Compiler 2024.0.2 sw_os_list000 = SUSE Linux Enterprise Server 15 SP5Kernel sw_os_list001 = 5.14.21-150500.53-default