|
Lenovo Global Technology ThinkSystem ST45 V3 |
SPECspeed®2017_int_base = 19.0 |
|
SPECspeed®2017_int_peak = 19.8 |
| CPU2017 License: | 9017 | Test Date: | Oct-2024 |
|---|---|---|---|
| Test Sponsor: | Lenovo Global Technology | Hardware Availability: | Dec-2024 |
| Tested by: | Lenovo Global Technology | Software Availability: | Oct-2024 |
Benchmark result graphs are available in the PDF report.
| Hardware | |
|---|---|
| CPU Name: | AMD EPYC 4344P |
| Max MHz: | 5300 |
| Nominal: | 3800 |
| Enabled: | 8 cores, 1 chip, 2 threads/core |
| Orderable: | 1 chip |
| Cache L1: | 32 KB I + 32 KB D on chip per core |
| L2: | 1 MB I+D on chip per core |
| L3: | 32 MB I+D on chip per chip |
| Other: | None |
| Memory: | 64 GB (2 x 32 GB 2Rx8 PC5-5600B-E, running at 5200) |
| Storage: | 1 x 960GB SATA SSD |
| Other: | CPU Cooling: Air |
| Software | |
|---|---|
| OS: | SUSE Linux Enterprise Server 15 SP6 Kernel 6.4.0-150600.21-default |
| Compiler: | C/C++/Fortran: Version 5.0.0 of AOCC |
| Parallel: | Yes |
| Firmware: | Lenovo BIOS Version QIE101S 1.10 released Aug-2024 |
| File System: | xfs |
| System State: | Run level 3 (multi-user) |
| Base Pointers: | 64-bit |
| Peak Pointers: | 64-bit |
| Other: | None |
| Power Management: | OS set to balance power and performance |
| Power | |
|---|---|
| Max. Power (W): | 93.66 |
| Idle Power (W): | 27.35 |
| Min. Temperature (C): | 25.00 |
| Elevation (m): | 43 |
| Line Standard: | 220 V / 50 Hz / 1 phase / 3 wires |
| Provisioning: | Line-powered |
| Power Settings | |
|---|---|
| Management FW: | None |
| Memory Mode: | Normal |
| Power-Relevant Hardware | |
|---|---|
| Power Supply: | 1 x 300 W (non-redundant) |
| Details: | ATX-300W Power Supply BMFL |
| Backplane: | None |
| Other Storage: | None |
| Storage Model #s: | 4XB7A82275 |
| NICs Installed: | 1 x ThinkSystem 2-port embedded @ 1 Gb |
| NICs Enabled (FW/OS): | 2 / 1 |
| NICs Connected/Speed: | 1 @ 1 Gb |
| Other HW Model #s: | Two fixed system fans (front drive bay and rear) |
| Power Analyzer | |
|---|---|
| Power Analyzer: | WIN:9888 |
| Hardware Vendor: | YOKOGAWA, Inc. |
| Model: | YokogawaWT310E |
| Serial Number: | C3SH31009E |
| Input Connection: | Default |
| Metrology Institute: | CNAS |
| Calibration By: | CEPREI Calibration and Testing Centre |
| Calibration Label: | 1GA24011968-0005 |
| Calibration Date: | 27-Sep-2024 |
| PTDaemon® Version: | 1.10.0 (82175bac; 2022-08-17) |
| Setup Description: | Connected to PSU1 |
| Current Ranges Used: | 1A |
| Voltage Range Used: | 300V |
| Temperature Meter | |
|---|---|
| Temperature Meter: | WIN:9889 |
| Hardware Vendor: | Digi International, Inc. |
| Model: | DigiWATCHPORT H |
| Serial Number: | W62330940 |
| Input Connection: | USB |
| PTDaemon Version: | 1.10.0 (82175bac; 2022-08-17) |
| Setup Description: | 50 mm in front of SUT main intake |
Base Results Table
| Benchmark | Threads | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPECspeed®2017_int_base | 19.0 | ||||||||||||||||||
| SPECspeed®2017_int_energy_base | 362 | ||||||||||||||||||
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
| 600.perlbench_s | 8 | 145 | 12.3 | 8.09 | 238 | 55.9 | 56.7 | 145 | 12.2 | 8.24 | 234 | 56.6 | 57.7 | 146 | 12.2 | 8.18 | 235 | 56.1 | 57.2 |
| 602.gcc_s | 8 | 200 | 19.9 | 10.5 | 410 | 52.8 | 56.2 | 200 | 19.9 | 11.1 | 390 | 55.4 | 58.1 | 201 | 19.8 | 11.2 | 386 | 55.8 | 57.8 |
| 605.mcf_s | 8 | 147 | 32.2 | 8.06 | 639 | 54.9 | 57.9 | 147 | 32.1 | 8.35 | 617 | 56.7 | 58.3 | 147 | 32.2 | 8.08 | 637 | 55.2 | 57.5 |
| 620.omnetpp_s | 8 | 120 | 13.6 | 6.36 | 279 | 53.2 | 55.2 | 112 | 14.5 | 5.73 | 310 | 51.0 | 52.7 | 112 | 14.6 | 5.71 | 311 | 51.1 | 52.9 |
| 623.xalancbmk_s | 8 | 51.0 | 27.8 | 2.77 | 555 | 54.3 | 59.4 | 50.2 | 28.2 | 2.58 | 597 | 51.3 | 59.2 | 50.4 | 28.1 | 2.79 | 551 | 55.4 | 60.8 |
| 625.x264_s | 8 | 53.8 | 32.8 | 2.94 | 652 | 54.7 | 56.2 | 53.9 | 32.7 | 2.97 | 646 | 55.1 | 59.1 | 54.0 | 32.7 | 3.04 | 631 | 56.3 | 57.9 |
| 631.deepsjeng_s | 8 | 140 | 10.3 | 7.12 | 219 | 51.0 | 52.4 | 140 | 10.2 | 7.79 | 200 | 55.7 | 56.7 | 140 | 10.2 | 7.66 | 203 | 54.8 | 56.0 |
| 641.leela_s | 8 | 202 | 8.44 | 10.8 | 171 | 53.5 | 54.6 | 203 | 8.41 | 11.2 | 165 | 55.1 | 56.0 | 202 | 8.45 | 10.9 | 170 | 53.8 | 54.8 |
| 648.exchange2_s | 8 | 82.5 | 35.7 | 4.59 | 697 | 55.6 | 56.3 | 78.8 | 37.3 | 4.54 | 705 | 57.6 | 58.3 | 79.7 | 36.9 | 4.42 | 724 | 55.4 | 56.0 |
| 657.xz_s | 8 | 345 | 17.9 | 27.5 | 245 | 79.7 | 91.4 | 342 | 18.1 | 27.5 | 245 | 80.4 | 91.5 | 344 | 18.0 | 27.4 | 246 | 79.7 | 90.3 |
Peak Results Table
| Benchmark | Threads | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPECspeed®2017_int_peak | 19.8 | ||||||||||||||||||
| SPECspeed®2017_int_energy_peak | 380 | ||||||||||||||||||
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
| 600.perlbench_s | 8 | 145 | 12.3 | 8.09 | 238 | 55.9 | 56.7 | 145 | 12.2 | 8.24 | 234 | 56.6 | 57.7 | 146 | 12.2 | 8.18 | 235 | 56.1 | 57.2 |
| 602.gcc_s | 1 | 200 | 19.9 | 10.9 | 396 | 54.8 | 57.5 | 200 | 19.9 | 10.8 | 402 | 53.9 | 56.7 | 199 | 20.0 | 10.9 | 397 | 54.7 | 57.5 |
| 605.mcf_s | 1 | 144 | 32.9 | 7.95 | 648 | 55.4 | 57.7 | 144 | 32.9 | 7.81 | 659 | 54.4 | 56.6 | 144 | 32.9 | 7.95 | 648 | 55.4 | 57.6 |
| 620.omnetpp_s | 1 | 111 | 14.7 | 6.05 | 293 | 54.5 | 56.2 | 112 | 14.5 | 5.99 | 296 | 53.4 | 55.3 | 113 | 14.5 | 6.11 | 290 | 54.3 | 56.1 |
| 623.xalancbmk_s | 1 | 45.6 | 31.1 | 2.45 | 627 | 53.8 | 60.1 | 46.1 | 30.7 | 2.45 | 629 | 53.1 | 59.0 | 45.6 | 31.1 | 2.45 | 628 | 53.8 | 60.2 |
| 625.x264_s | 1 | 54.6 | 32.3 | 3.04 | 631 | 55.8 | 57.1 | 53.8 | 32.8 | 2.95 | 650 | 54.9 | 56.3 | 53.7 | 32.8 | 2.99 | 642 | 55.7 | 57.1 |
| 631.deepsjeng_s | 8 | 140 | 10.3 | 7.12 | 219 | 51.0 | 52.4 | 140 | 10.2 | 7.79 | 200 | 55.7 | 56.7 | 140 | 10.2 | 7.66 | 203 | 54.8 | 56.0 |
| 641.leela_s | 1 | 203 | 8.40 | 11.0 | 168 | 54.0 | 54.7 | 202 | 8.45 | 10.7 | 173 | 52.8 | 53.8 | 201 | 8.48 | 10.7 | 172 | 53.2 | 54.7 |
| 648.exchange2_s | 1 | 78.7 | 37.3 | 4.42 | 724 | 56.1 | 57.2 | 78.5 | 37.5 | 4.36 | 733 | 55.6 | 56.4 | 78.6 | 37.4 | 4.37 | 732 | 55.6 | 56.4 |
| 657.xz_s | 16 | 253 | 24.4 | 19.9 | 339 | 78.5 | 92.3 | 254 | 24.4 | 19.9 | 338 | 78.6 | 93.7 | 254 | 24.4 | 19.8 | 339 | 78.3 | 92.4 |
Compiler Notes
The AMD64 AOCC Compiler Suite is available at http://developer.amd.com/amd-aocc/
Submit Notes
The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details.
Operating System Notes
'ulimit -s unlimited' was used to set environment stack size limit 'ulimit -l 2097152' was used to set environment locked pages in memory limit runcpu command invoked through numactl i.e.: numactl --interleave=all runcpu <etc> To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. To free node-local memory and avoid remote memory usage, 'sysctl -w vm.zone_reclaim_mode=1' run as root. To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. To disable address space layout randomization (ASLR) to reduce run-to-run variability, 'sysctl -w kernel.randomize_va_space=0' run as root. To enable Transparent Hugepages (THP) only on request for base runs, 'echo madvise > /sys/kernel/mm/transparent_hugepage/enabled' run as root. To enable THP for all allocations for peak runs, 'echo always > /sys/kernel/mm/transparent_hugepage/enabled' and 'echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root.
Environment Variables Notes
Environment variables set by runcpu before the start of the run:
GOMP_CPU_AFFINITY = "0-15"
LD_LIBRARY_PATH =
"/home/cpu2017-1.1.9-amd-aocc500_znver5_A1/amd_speed_aocc500_znver5_A_lib/lib:/home/cpu2017-1.1.9-amd-
aocc500_znver5_A1/amd_speed_aocc500_znver5_A_lib/lib32:"
LIBOMP_NUM_HIDDEN_HELPER_THREADS = "0"
MALLOC_CONF = "retain:true"
OMP_DYNAMIC = "false"
OMP_SCHEDULE = "static"
OMP_STACKSIZE = "128M"
OMP_THREAD_LIMIT = "16"
Environment variables set by runcpu during the 602.gcc_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 605.mcf_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 620.omnetpp_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 623.xalancbmk_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 625.x264_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 641.leela_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 648.exchange2_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 657.xz_s peak run:
GOMP_CPU_AFFINITY = "0-15"
General Notes
Binaries were compiled on a system with 2x AMD EPYC 9D64 CPU + 500GiB Memory using Ubuntu 22.04 NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented.
Platform Notes
Sysinfo program /home/cpu2017-1.1.9-amd-aocc500_znver5_A1/bin/sysinfo
Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197
running on localhost Tue Oct 15 03:55:25 2024
SUT (System Under Test) info as seen by some common utilities.
------------------------------------------------------------
Table of contents
------------------------------------------------------------
1. uname -a
2. w
3. Username
4. ulimit -a
5. sysinfo process ancestry
6. /proc/cpuinfo
7. lscpu
8. numactl --hardware
9. /proc/meminfo
10. who -r
11. Systemd service manager version: systemd 254 (254.10+suse.84.ge8d77af424)
12. Services, from systemctl list-unit-files
13. Linux kernel boot-time arguments, from /proc/cmdline
14. cpupower frequency-info
15. tuned-adm active
16. sysctl
17. /sys/kernel/mm/transparent_hugepage
18. /sys/kernel/mm/transparent_hugepage/khugepaged
19. OS release
20. Disk information
21. /sys/devices/virtual/dmi/id
22. dmidecode
23. BIOS
------------------------------------------------------------
------------------------------------------------------------
1. uname -a
Linux localhost 6.4.0-150600.21-default #1 SMP PREEMPT_DYNAMIC Thu May 16 11:09:22 UTC 2024 (36c1e09)
x86_64 x86_64 x86_64 GNU/Linux
------------------------------------------------------------
2. w
03:55:25 up 13:38, 1 user, load average: 0.93, 3.69, 3.16
USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT
root pts/0 172.30.81.2 Mon14 10:50m 1.21s 0.05s /bin/bash ./amd_speed_aocc500_znver5_A1.sh
------------------------------------------------------------
3. Username
From environment variable $USER: root
------------------------------------------------------------
4. ulimit -a
core file size (blocks, -c) unlimited
data seg size (kbytes, -d) unlimited
scheduling priority (-e) 0
file size (blocks, -f) unlimited
pending signals (-i) 253429
max locked memory (kbytes, -l) 2097152
max memory size (kbytes, -m) unlimited
open files (-n) 1024
pipe size (512 bytes, -p) 8
POSIX message queues (bytes, -q) 819200
real-time priority (-r) 0
stack size (kbytes, -s) unlimited
cpu time (seconds, -t) unlimited
max user processes (-u) 253429
virtual memory (kbytes, -v) unlimited
file locks (-x) unlimited
------------------------------------------------------------
5. sysinfo process ancestry
/usr/lib/systemd/systemd --switched-root --system --deserialize=42
sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups
sshd: root [priv]
sshd: root@pts/0
-bash
/bin/bash ./03.local_run_SPECcpu.sh
/bin/bash ./Run035-compliant-amd-speedint.sh
python3 ./run_amd_speed_aocc500_znver5_A1.py
/bin/bash ./amd_speed_aocc500_znver5_A1.sh
runcpu --power --config amd_speed_aocc500_znver5_A1.cfg --tune all --reportable --iterations 3 intspeed
runcpu --power --configfile amd_speed_aocc500_znver5_A1.cfg --tune all --reportable --iterations 3 --runmode
speed --tune base:peak --size test:train:refspeed intspeed --nopreenv --note-preenv --logfile
$SPEC/tmp/CPU2017.046/templogs/preenv.intspeed.046.0.log --lognum 046.0 --from_runcpu 2
specperl $SPEC/bin/sysinfo
$SPEC = /home/cpu2017-1.1.9-amd-aocc500_znver5_A1
------------------------------------------------------------
6. /proc/cpuinfo
model name : AMD EPYC 4344P 8-Core Processor
vendor_id : AuthenticAMD
cpu family : 25
model : 97
stepping : 2
microcode : 0xa601206
bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass srso
TLB size : 3584 4K pages
cpu cores : 8
siblings : 16
1 physical ids (chips)
16 processors (hardware threads)
physical id 0: core ids 0-7
physical id 0: apicids 0-15
Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for
virtualized systems. Use the above data carefully.
------------------------------------------------------------
7. lscpu
From lscpu from util-linux 2.39.3:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 48 bits physical, 48 bits virtual
Byte Order: Little Endian
CPU(s): 16
On-line CPU(s) list: 0-15
Vendor ID: AuthenticAMD
BIOS Vendor ID: Advanced Micro Devices, Inc.
Model name: AMD EPYC 4344P 8-Core Processor
BIOS Model name: AMD EPYC 4344P 8-Core Processor None CPU @ 3.8GHz
BIOS CPU family: 107
CPU family: 25
Model: 97
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 1
Stepping: 2
Frequency boost: enabled
CPU(s) scaling MHz: 55%
CPU max MHz: 5388.2808
CPU min MHz: 3000.0000
BogoMIPS: 7585.31
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb
rdtscp lm constant_tsc rep_good amd_lbr_v2 nopl nonstop_tsc cpuid
extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16
sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm
cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext
perfctr_llc mwaitx cpb cat_l3 cdp_l3 hw_pstate ssbd mba perfmon_v2
ibrs ibpb stibp ibrs_enhanced vmmcall fsgsbase bmi1 avx2 smep bmi2
invpcid cqm rdt_a avx512f avx512dq rdseed adx smap avx512ifma
clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt xsavec
xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local
user_shstk avx512_bf16 clzero irperf xsaveerptr rdpru wbnoinvd cppc
arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid
decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif
x2avic v_spec_ctrl vnmi avx512vbmi umip pku ospke avx512_vbmi2 gfni
vaes vpclmulqdq avx512_vnni avx512_bitalg avx512_vpopcntdq rdpid
overflow_recov succor smca flush_l1d
Virtualization: AMD-V
L1d cache: 256 KiB (8 instances)
L1i cache: 256 KiB (8 instances)
L2 cache: 8 MiB (8 instances)
L3 cache: 32 MiB (1 instance)
NUMA node(s): 1
NUMA node0 CPU(s): 0-15
Vulnerability Gather data sampling: Not affected
Vulnerability Itlb multihit: Not affected
Vulnerability L1tf: Not affected
Vulnerability Mds: Not affected
Vulnerability Meltdown: Not affected
Vulnerability Mmio stale data: Not affected
Vulnerability Reg file data sampling: Not affected
Vulnerability Retbleed: Not affected
Vulnerability Spec rstack overflow: Mitigation; Safe RET
Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl
Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization
Vulnerability Spectre v2: Mitigation; Enhanced / Automatic IBRS; IBPB conditional; STIBP
always-on; RSB filling; PBRSB-eIBRS Not affected; BHI Not affected
Vulnerability Srbds: Not affected
Vulnerability Tsx async abort: Not affected
From lscpu --cache:
NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE
L1d 32K 256K 8 Data 1 64 1 64
L1i 32K 256K 8 Instruction 1 64 1 64
L2 1M 8M 8 Unified 2 2048 1 64
L3 32M 32M 16 Unified 3 32768 1 64
------------------------------------------------------------
8. numactl --hardware
NOTE: a numactl 'node' might or might not correspond to a physical chip.
available: 1 nodes (0)
node 0 cpus: 0-15
node 0 size: 63407 MB
node 0 free: 62787 MB
node distances:
node 0
0: 10
------------------------------------------------------------
9. /proc/meminfo
MemTotal: 64929400 kB
------------------------------------------------------------
10. who -r
run-level 3 Oct 14 14:18
------------------------------------------------------------
11. Systemd service manager version: systemd 254 (254.10+suse.84.ge8d77af424)
Default Target Status
multi-user running
------------------------------------------------------------
12. Services, from systemctl list-unit-files
STATE UNIT FILES
enabled YaST2-Firstboot YaST2-Second-Stage apparmor auditd cron getty@ irqbalance issue-generator
kbdsettings klog lvm2-monitor nscd postfix purge-kernels rollback rsyslog smartd sshd
systemd-pstore tuned wicked wickedd-auto4 wickedd-dhcp4 wickedd-dhcp6 wickedd-nanny
enabled-runtime systemd-remount-fs
disabled autofs autoyast-initscripts blk-availability boot-sysctl ca-certificates chrony-wait
chronyd console-getty cups cups-browsed debug-shell ebtables exchange-bmc-os-info
firewalld fsidd gpm grub2-once haveged hwloc-dump-hwdata ipmi ipmievd issue-add-ssh-keys
kexec-load lunmask man-db-create multipathd nfs nfs-blkmap rpcbind rpmconfigcheck rsyncd
serial-getty@ smartd_generate_opts snmpd snmptrapd systemd-boot-check-no-failures
systemd-confext systemd-network-generator systemd-sysext systemd-time-wait-sync
systemd-timesyncd
generated ntp_sync
indirect systemd-userdbd wickedd
------------------------------------------------------------
13. Linux kernel boot-time arguments, from /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-6.4.0-150600.21-default
root=UUID=89a766c1-c11a-42be-be76-94e9ae8b20b1
splash=silent
mitigations=auto
quiet
security=apparmor
------------------------------------------------------------
14. cpupower frequency-info
analyzing CPU 6:
current policy: frequency should be within 3.00 GHz and 3.80 GHz.
The governor "conservative" may decide which speed to use
within this range.
boost state support:
Supported: yes
Active: yes
------------------------------------------------------------
15. tuned-adm active
Current active profile: desktop
------------------------------------------------------------
16. sysctl
kernel.numa_balancing 0
kernel.randomize_va_space 0
vm.compaction_proactiveness 20
vm.dirty_background_bytes 0
vm.dirty_background_ratio 10
vm.dirty_bytes 0
vm.dirty_expire_centisecs 3000
vm.dirty_ratio 8
vm.dirty_writeback_centisecs 500
vm.dirtytime_expire_seconds 43200
vm.extfrag_threshold 500
vm.min_unmapped_ratio 1
vm.nr_hugepages 0
vm.nr_hugepages_mempolicy 0
vm.nr_overcommit_hugepages 0
vm.swappiness 1
vm.watermark_boost_factor 15000
vm.watermark_scale_factor 10
vm.zone_reclaim_mode 1
------------------------------------------------------------
17. /sys/kernel/mm/transparent_hugepage
defrag [always] defer defer+madvise madvise never
enabled [always] madvise never
hpage_pmd_size 2097152
shmem_enabled always within_size advise [never] deny force
------------------------------------------------------------
18. /sys/kernel/mm/transparent_hugepage/khugepaged
alloc_sleep_millisecs 60000
defrag 1
max_ptes_none 511
max_ptes_shared 256
max_ptes_swap 64
pages_to_scan 4096
scan_sleep_millisecs 10000
------------------------------------------------------------
19. OS release
From /etc/*-release /etc/*-version
os-release SUSE Linux Enterprise Server 15 SP6
------------------------------------------------------------
20. Disk information
SPEC is set to: /home/cpu2017-1.1.9-amd-aocc500_znver5_A1
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda3 xfs 893G 94G 800G 11% /
------------------------------------------------------------
21. /sys/devices/virtual/dmi/id
Vendor: LENOVO
Product: ThinkSystem ST45 V3
Product Family: ThinkSystem
Serial: INVALID
------------------------------------------------------------
22. dmidecode
Additional information from dmidecode 3.4 follows. WARNING: Use caution when you interpret this section.
The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately
determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the
"DMTF SMBIOS" standard.
Memory:
2x SK Hynix HMCG88AGBEA084N 32 GB 2 rank 5600, configured at 5200
------------------------------------------------------------
23. BIOS
(This section combines info from /sys/devices and dmidecode.)
BIOS Vendor: LENOVO
BIOS Version: QIE101S-1.10
BIOS Date: 08/28/2024
BIOS Revision: 1.10
Firmware Revision: 12.65
ST45 V3 CPU performance result based on 65W maximum consumption limit.
Compiler Version Notes
============================================================================================================
C | 600.perlbench_s(base, peak) 602.gcc_s(base, peak) 605.mcf_s(base, peak) 625.x264_s(base, peak)
| 657.xz_s(base, peak)
------------------------------------------------------------------------------------------------------------
AMD clang version 17.0.6 (CLANG: AOCC_5.0.0-Build#1316 2024_09_09)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc/aocc-compiler-rel-5.0.0-4925-1316/bin
------------------------------------------------------------------------------------------------------------
============================================================================================================
C++ | 620.omnetpp_s(base, peak) 623.xalancbmk_s(base, peak) 631.deepsjeng_s(base, peak)
| 641.leela_s(base, peak)
------------------------------------------------------------------------------------------------------------
AMD clang version 17.0.6 (CLANG: AOCC_5.0.0-Build#1316 2024_09_09)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc/aocc-compiler-rel-5.0.0-4925-1316/bin
------------------------------------------------------------------------------------------------------------
============================================================================================================
Fortran | 648.exchange2_s(base, peak)
------------------------------------------------------------------------------------------------------------
AMD clang version 17.0.6 (CLANG: AOCC_5.0.0-Build#1316 2024_09_09)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc/aocc-compiler-rel-5.0.0-4925-1316/bin
------------------------------------------------------------------------------------------------------------
Base Portability Flags
| 600.perlbench_s: | -DSPEC_LINUX_X64 -DSPEC_LP64 |
| 602.gcc_s: | -DSPEC_LP64 |
| 605.mcf_s: | -DSPEC_LP64 |
| 620.omnetpp_s: | -DSPEC_LP64 |
| 623.xalancbmk_s: | -DSPEC_LINUX -DSPEC_LP64 |
| 625.x264_s: | -DSPEC_LP64 |
| 631.deepsjeng_s: | -DSPEC_LP64 |
| 641.leela_s: | -DSPEC_LP64 |
| 648.exchange2_s: | -DSPEC_LP64 |
| 657.xz_s: | -DSPEC_LP64 |
Base Optimization Flags
C benchmarks:
C++ benchmarks:
Fortran benchmarks:
Base Other Flags
C benchmarks:
| -Wno-return-type -Wno-unused-command-line-argument |
C++ benchmarks:
| -Wno-unused-command-line-argument |
Fortran benchmarks:
| -Wno-unused-command-line-argument |
Peak Portability Flags
Same as Base Portability Flags