# Invocation command line: # /root/cpu2017-speedF/bin/harness/runcpu --configfile amd_speed_aocc500_znver5_A1.cfg --tune base --reportable --iterations 3 --nopower --runmode speed --tune base --size test:train:refspeed fpspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 500 SPEC CPU 2017 V1.1.9 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc500_znver5_A1.cfg # Creation Date : September 11, 2024 # CPU 2017 Version : 1.1.9 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC 5.0.0 # Operating system version : Ubuntu 22.04 # Supported OS's : SLE 15 SP6, Ubuntu 22.04/24.04 # Hardware : AMD Turin (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 32/64-bit # Auto Parallelization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc500_znver5_A1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU 2017 under optimized conditions on AMD znver5-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD znver5 microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc500_znver5_A1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on one socket AMD # znver5-based servers with 96 cores, SMT enabled and 768 (64x12) GB of DDR5 # memory distributed evenly among all 12 channels using 64 GiB DIMMs. # # To run the binary package on other znver5 configurations, please review # "Readme.amd_speed_aocc500_znver5_A1.txt". In general, znver5 CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc500_znver5_A1.cfg" or any # other file besides "ini_amd_speed_aocc500_znver5_A1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 22.04, RHEL 8.6/9, and SLE 15 SP4. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Modifiable macros: ################################################################################ # "allow_build"" switch: # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc500 %define binary_package_name amd_speed_%{compiler_name}_znver5_A %define binary_package_ext %{binary_package_name} %define binary_package_revision 1 %define build_path /home/work/cpu2017/v119/aocc5/1316 %define flags_file_name %{compiler_name}-flags-A1.xml # Do NOT change build_lib_dir after the build or it will trigger a # rebuild of the xalanc. It should also remain literal: %define build_lib_dir amd_speed_aocc500_znver5_A_lib # To enable the platform file, be sure to uncomment the flagsurl02 header line # below in the Header settings. %define platform_file_name INVALID_platform_%{binary_package_name}.xml ################################################################################ # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc %define flags_inc_file_name %{binary_package_full_name}_flags.inc %define port_flags_inc_file_name %{binary_package_full_name}_flags_portability.inc %define workaround_flags_inc_file_name %{binary_package_full_name}_flags_workaround.inc # Binary label extension: # Only modify the binary label extension if you plan to rebuild the binaries. # If you plan to recompile these CPU 2017 binaries, please choose a new extension # name below to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true above. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Note that AMD calls an external script to set up the compiler and library # paths before initiating the build. %define ext %{binary_package_ext} ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # retain:true is necessary to avoid gcc out-of-memory exceptions on certain SUTs: # oversize_threshold is required to support jemalloc 5.2.x+ preENV_MALLOC_CONF = retain:true preENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 0 # OpenMP environment variables: preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false preENV_OMP_STACKSIZE = 128M # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib:$[top]/%{lib_dir}/lib32:%{ENV_LD_LIBRARY_PATH} # Define 32-bit library build paths: # Do NOT use $[top] with the 32-bit libraries because doing so will cause an # options checksum error triggering a xalanc recompile attempt on SUTs having # different file paths. # Do NOT change build_lib_dir after the build or it will also trigger a # rebuild of the xalanc: AMDALLOC_LIB32_PATH = %{build_path}/%{build_lib_dir}/lib32 %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc500_znver5_A1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc500_znver5_A1.inc # File generation code date: August 29, 2024 # File generation date/time: September 22, 2024 / 04:10:47 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 256 %define physical_core_count 256 ################################################################################ ################################################################################ # The following inc blocks set the speed thread counts and affinity settings. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # # Selected thread counts from '9755' section of CPU info ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 256 preENV_GOMP_CPU_AFFINITY = 0-255 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 256 ENV_GOMP_CPU_AFFINITY = 0-255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 256 ENV_GOMP_CPU_AFFINITY = 0-255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 0 bind0 = numactl --physcpubind=0 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 256 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s=peak: threads = 256 ENV_GOMP_CPU_AFFINITY = 0-255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 256 627.cam4_s,654.roms_s,657.xz_s=peak: threads = 256 ENV_GOMP_CPU_AFFINITY = 0-255 bind0 = numactl --physcpubind=0-255 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =9050 tester =Quanta Computer Inc. test_sponsor =Quanta Computer Inc. hw_vendor =Quanta Cloud Technology hw_model000 =QuantaGrid D44N-1U hw_model001 =AMD EPYC 9755 #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 5.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Oct-2024 sw_avail =Sep-2024 hw_cpu_name =AMD EPYC 9755 hw_cpu_nominal_mhz =2700 hw_cpu_max_mhz =4100 hw_ncores =256 hw_nthreadspercore =1 hw_ncpuorder =1,2 chips hw_other =CPU Cooling: Air fw_bios =Version 3B02 released Sep-2024 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 48 KB D on chip per core hw_scache =1 MB I+D on chip per core hw_tcache000 =512 MB I+D on chip per chip, 32 MB shared / 8 hw_tcache001 = cores hw_ocache =None sw_other =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 9D64 CPU + 500GiB Memory using Ubuntu 22.04 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_035 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_040 =To free node-local memory and avoid remote memory usage, notes_os_045 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_050 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_055 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_060 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. notes_os_065 = notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = # notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) # notes_jemalloc_005 =jemalloc 5.1.0 is available here: # notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 # notes_jemalloc_015 = # sw_other000 =jemalloc: jemalloc memory allocator library v5.1.0 ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (edit and uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = TDP: 400 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = PPT: 400 # notes_plat_010 = NPS: 4 # notes_plat_011 = Workload Profile = CPU Intensive # notes_plat_012 = TSME = Disabled # notes_plat_014 = SEV Control = Disabled # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intspeed: sw_peak_ptrsize =32/64-bit notes_os_thp_000 =To enable Transparent Hugepages (THP) only on request for base runs, notes_os_thp_001 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled' run as root. notes_os_thp_002 =To enable THP for all allocations for peak runs, notes_os_thp_003 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_004 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_os_thp_005 = ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fpspeed: sw_peak_ptrsize =Not Applicable notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_os_thp_015 = ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =1 x 1.92 TB NVMe SSD hw_memory000 =1536 GB (24 x 64 GB 2Rx4 PC5-6400B-R, hw_memory001 =running at 6000) hw_memory002 = hw_nchips =2 prepared_by =prepared by Quanta Computer Inc. sw_file =btrfs sw_os000 =SUSE Linux Enterprise Server 15 SP6 sw_os001 =kernel 6.4.0-150600.21-default sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/root/cpu2017-speedF/config/amd_speed_aocc500_znver5_A1.inc' # Switch back to default block after the include file: default: fail_build = yes # FIX THIS SO THAT CHECKSUMS WILL BE ENFORCED! %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib:$[top]/%{build_lib_dir}/lib32:%{ENV_LIBRARY_PATH} % define build_ncpus 64 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/aocc500-flags.2024-10-10.00.xml flagsurl001 = http://www.spec.org/cpu2017/flags/Quanta-Computer-Inc-amd-speccpu-setting-v1_AMD_Turin.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ # Include the flags file: ################################################################################ #include: %{flags_inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc500_znver5_A1_flags.inc' ############################################################################ ################################################################################ # AMD AOCC 5.0.0 SPEC CPU2017 V1.1.9 Speed Configuration Flags for AMD64 Linux ################################################################################ # Compilers ################################################################################ default: CC = clang -m64 CXX = clang++ -m64 -std=c++14 FC = flang -m64 CLD = clang -m64 CXXLD = clang++ -m64 -std=c++14 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Default libraries and variables ################################################################################ default: # Libraries: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdalloc \ -lamdlibm \ -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM # Variables: OPT_ROOT = -march=znver5 \ $(VECMATHLIB) \ -ffast-math \ -fopenmp OPT_ROOT_BASE = -O3 \ $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast \ $(OPT_ROOT) \ -flto THP_ALWAYS = echo always > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag THP_NEVER = echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo never > /sys/kernel/mm/transparent_hugepage/defrag THP_MADVISE = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag DEFAULT_SUBMIT = $BIND $command ################################################################################ # Portability and workaround include files ################################################################################ # Portability flags include file: #include: %{port_flags_inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc500_znver5_A1_flags_portability.inc' ############################################################################ ################################################################################ # AMD AOCC 5.0.0 SPEC CPU2017 V1.1.9 Speed Portability Flags for AMD64 Linux ################################################################################ default: # data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # End Portability Flags ################################################################################ # ---- End inclusion of '/root/cpu2017-speedF/config/amd_speed_aocc500_znver5_A1_flags_portability.inc' # Workaround flags include file: #include: %{workaround_flags_inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc500_znver5_A1_flags_workaround.inc' ############################################################################ ################################################################################ # AMD AOCC 5.0.0 SPEC CPU2017 V1.1.9 Speed Workaround Flags for AMD64 Linux ################################################################################ # The workarounds in this section would not qualify under the SPEC CPU # PORTABILITY rule. # - In peak, they can be set as needed for individual benchmarks. # - In base, individual settings are not allowed; set for whole suite. # Use EXTRA_CFLAGS, EXTRA_CXXFLAGS, and EXTRA_FFLAGS for them. # # See: # https://www.spec.org/cpu2017/Docs/runrules.html#portability # https://www.spec.org/cpu2017/Docs/runrules.html#BaseFlags ####################### # Default workarounds # ####################### default: # Allow unused compile/link arguments without triggering warnings during build: EXTRA_CFLAGS = -Wno-unused-command-line-argument EXTRA_CXXFLAGS = -Wno-unused-command-line-argument EXTRA_FFLAGS = -Wno-unused-command-line-argument LDOPTIONS = -Wno-unused-command-line-argument #################### # Base workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - base # ############################## # # *** NONE *** # ######################### # FP workarounds - base # ######################### # # *** NONE *** # #################### # Peak workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - peak # ############################## # # *** NONE *** # ##################################### # Floating Point workarounds - peak # ##################################### # # *** NONE *** # # ---- End inclusion of '/root/cpu2017-speedF/config/amd_speed_aocc500_znver5_A1_flags_workaround.inc' ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) \ -DSPEC_OPENMP \ -flto \ -fremap-arrays \ -fstrip-mining \ -fstruct-layout=7 \ -mllvm -inline-threshold=1000 \ -mllvm -reduce-array-computations=3 \ -mllvm -unroll-threshold=50 \ -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_BASE) \ -DSPEC_OPENMP \ -flto \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reduce-array-computations=3 \ -mllvm -unroll-threshold=100 \ -zopt FOPTIMIZE = $(OPT_ROOT_BASE) \ -DSPEC_OPENMP \ -flto \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -Mrecursive \ -zopt LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching #other libraries # Put OpenMP and math libraries here: # -lm needed at the end for some transcendental functions: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = ######################### # intspeed tuning flags # ######################### intspeed: FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -optimize-strided-mem-cost EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 EXTRA_CXXFLAGS = -fvirtual-function-elimination \ -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition \ -Wl,-mllvm -Wl,-extra-inliner LDCXXFLAGS = LDFFLAGS = -Wl,-mllvm -Wl,-enable-iv-split \ -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop ############################## # intspeed base tuning flags # ############################## intspeed=base: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lflang \ -lm EXTRA_CLIBS = -lamdalloc EXTRA_CXXLIBS = -lamdalloc-ext EXTRA_FLIBS = -lamdalloc submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################## # intspeed peak tuning flags # ############################## intspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed base tuning flags # ############################# fpspeed=base: EXTRA_CFLAGS = -mrecip=none \ -Wno-unused-command-line-argument submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed peak tuning flags # ############################# fpspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) \ -DSPEC_OPENMP \ -fremap-arrays \ -fstrip-mining \ -fstruct-layout=9 \ -mllvm -inline-threshold=1000 \ -mllvm -reduce-array-computations=3 \ -mllvm -unroll-threshold=50 \ -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_PEAK) \ -DSPEC_OPENMP \ -mllvm -reduce-array-computations=3 \ -mllvm -unroll-threshold=100 \ -zopt FOPTIMIZE = $(OPT_ROOT_PEAK) \ -DSPEC_OPENMP \ -mllvm -reduce-array-computations=3 \ -Mrecursive \ -zopt LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw # Benchmark specific peak tuning flags: 600.perlbench_s=peak: #lang='C' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 602.gcc_s=peak: #lang='C' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 603.bwaves_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -DSPEC_OPENMP \ -fscalar-transform \ -fvector-transform \ -mllvm -reduce-array-computations=3 \ -Mrecursive submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 605.mcf_s=peak: #lang='C' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} LDCFLAGS = -Wl,-mllvm -Wl,-extra-inliner 607.cactuBSSN_s=peak: #lang='CXX,C,F' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 619.lbm_s=peak: #lang='C' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 620.omnetpp_s=peak: #lang='CXX' EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang -lm submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 621.wrf_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT) \ -Ofast \ -DSPEC_OPENMP \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -Mrecursive \ -zopt submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 623.xalancbmk_s=peak: #lang='CXX' EXTRA_CXXFLAGS = -fvirtual-function-elimination \ -fvisibility=hidden \ -mllvm -do-block-reorder=advanced LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 \ -Wl,-mllvm -Wl,-do-block-reorder=advanced EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang \ -lm submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 625.x264_s=peak: #lang='C' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 627.cam4_s=peak: #lang='F,C' EXTRA_CFLAGS = -mrecip=none \ -Wno-unused-command-line-argument LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_NEVER}; ${DEFAULT_SUBMIT} 628.pop2_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT) \ -Ofast \ -DSPEC_OPENMP \ -fscalar-transform \ -fvector-transform \ -mllvm -reduce-array-computations=3 \ -Mrecursive submit = ${THP_MADVISE}; ${DEFAULT_SUBMIT} 631.deepsjeng_s=peak: #lang='CXX' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 638.imagick_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 641.leela_s=peak: #lang='CXX' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 644.nab_s=peak: #lang='C' EXTRA_CFLAGS = -mrecip=none \ -Wno-unused-command-line-argument submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 648.exchange2_s=peak: #lang='F' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 649.fotonik3d_s=peak: #lang='F' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 654.roms_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -DSPEC_OPENMP \ -fscalar-transform \ -fvector-transform \ -mllvm -reduce-array-computations=3 \ -Mrecursive submit = ${THP_NEVER}; ${DEFAULT_SUBMIT} # ---- End inclusion of '/root/cpu2017-speedF/config/amd_speed_aocc500_znver5_A1_flags.inc' # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:2eb381fc1a58eb8122e4a1b875c1e38b3489dac84088192aa0ec6d157b084d06) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /root/cpu2017-speedF/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197 notes_plat_sysinfo_015 = running on localhost Sun Sep 22 04:11:01 2024 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = notes_plat_sysinfo_035 = ------------------------------------------------------------ notes_plat_sysinfo_040 = Table of contents notes_plat_sysinfo_045 = ------------------------------------------------------------ notes_plat_sysinfo_050 = 1. uname -a notes_plat_sysinfo_055 = 2. w notes_plat_sysinfo_060 = 3. Username notes_plat_sysinfo_065 = 4. ulimit -a notes_plat_sysinfo_070 = 5. sysinfo process ancestry notes_plat_sysinfo_075 = 6. /proc/cpuinfo notes_plat_sysinfo_080 = 7. lscpu notes_plat_sysinfo_085 = 8. numactl --hardware notes_plat_sysinfo_090 = 9. /proc/meminfo notes_plat_sysinfo_095 = 10. who -r notes_plat_sysinfo_100 = 11. Systemd service manager version: systemd 254 (254.10+suse.84.ge8d77af424) notes_plat_sysinfo_105 = 12. Services, from systemctl list-unit-files notes_plat_sysinfo_110 = 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_115 = 14. cpupower frequency-info notes_plat_sysinfo_120 = 15. tuned-adm active notes_plat_sysinfo_125 = 16. sysctl notes_plat_sysinfo_130 = 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_135 = 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_140 = 19. OS release notes_plat_sysinfo_145 = 20. Disk information notes_plat_sysinfo_150 = 21. /sys/devices/virtual/dmi/id notes_plat_sysinfo_155 = 22. dmidecode notes_plat_sysinfo_160 = 23. BIOS notes_plat_sysinfo_165 = ------------------------------------------------------------ notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = ------------------------------------------------------------ notes_plat_sysinfo_180 = 1. uname -a notes_plat_sysinfo_185 = Linux localhost 6.4.0-150600.21-default #1 SMP PREEMPT_DYNAMIC Thu May 16 11:09:22 UTC 2024 (36c1e09) notes_plat_sysinfo_190 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = ------------------------------------------------------------ notes_plat_sysinfo_205 = 2. w notes_plat_sysinfo_210 = 04:11:01 up 7:14, 3 users, load average: 0.01, 0.01, 0.00 notes_plat_sysinfo_215 = USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT notes_plat_sysinfo_220 = root tty1 - 20:56 7:14m 0.01s 0.01s -bash notes_plat_sysinfo_225 = root pts/0 192.168.118.1 04:08 44.00s 0.92s 0.12s /bin/bash ./amd_speed_aocc500_znver5_A1.sh notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = ------------------------------------------------------------ notes_plat_sysinfo_240 = 3. Username notes_plat_sysinfo_245 = From environment variable $USER: root notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = ------------------------------------------------------------ notes_plat_sysinfo_260 = 4. ulimit -a notes_plat_sysinfo_265 = core file size (blocks, -c) unlimited notes_plat_sysinfo_270 = data seg size (kbytes, -d) unlimited notes_plat_sysinfo_275 = scheduling priority (-e) 0 notes_plat_sysinfo_280 = file size (blocks, -f) unlimited notes_plat_sysinfo_285 = pending signals (-i) 6188119 notes_plat_sysinfo_290 = max locked memory (kbytes, -l) 2097152 notes_plat_sysinfo_295 = max memory size (kbytes, -m) unlimited notes_plat_sysinfo_300 = open files (-n) 1024 notes_plat_sysinfo_305 = pipe size (512 bytes, -p) 8 notes_plat_sysinfo_310 = POSIX message queues (bytes, -q) 819200 notes_plat_sysinfo_315 = real-time priority (-r) 0 notes_plat_sysinfo_320 = stack size (kbytes, -s) unlimited notes_plat_sysinfo_325 = cpu time (seconds, -t) unlimited notes_plat_sysinfo_330 = max user processes (-u) 6188119 notes_plat_sysinfo_335 = virtual memory (kbytes, -v) unlimited notes_plat_sysinfo_340 = file locks (-x) unlimited notes_plat_sysinfo_345 = notes_plat_sysinfo_350 = ------------------------------------------------------------ notes_plat_sysinfo_355 = 5. sysinfo process ancestry notes_plat_sysinfo_360 = /usr/lib/systemd/systemd --switched-root --system --deserialize=42 notes_plat_sysinfo_365 = sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups notes_plat_sysinfo_370 = sshd: root [priv] notes_plat_sysinfo_375 = sshd: root@pts/0 notes_plat_sysinfo_380 = -bash notes_plat_sysinfo_385 = /bin/bash ./test.sh notes_plat_sysinfo_390 = python3 ./run_amd_speed_aocc500_znver5_A1.py notes_plat_sysinfo_395 = /bin/bash ./amd_speed_aocc500_znver5_A1.sh notes_plat_sysinfo_400 = runcpu --config amd_speed_aocc500_znver5_A1.cfg --tune base --reportable --iterations 3 fpspeed notes_plat_sysinfo_405 = runcpu --configfile amd_speed_aocc500_znver5_A1.cfg --tune base --reportable --iterations 3 --nopower notes_plat_sysinfo_410 = --runmode speed --tune base --size test:train:refspeed fpspeed --nopreenv --note-preenv --logfile notes_plat_sysinfo_415 = $SPEC/tmp/CPU2017.001/templogs/preenv.fpspeed.001.0.log --lognum 001.0 --from_runcpu 2 notes_plat_sysinfo_420 = specperl $SPEC/bin/sysinfo notes_plat_sysinfo_425 = $SPEC = /root/cpu2017-speedF notes_plat_sysinfo_430 = notes_plat_sysinfo_435 = ------------------------------------------------------------ notes_plat_sysinfo_440 = 6. /proc/cpuinfo notes_plat_sysinfo_445 = model name : AMD EPYC 9755 128-Core Processor notes_plat_sysinfo_450 = vendor_id : AuthenticAMD notes_plat_sysinfo_455 = cpu family : 26 notes_plat_sysinfo_460 = model : 2 notes_plat_sysinfo_465 = stepping : 1 notes_plat_sysinfo_470 = microcode : 0xb002116 notes_plat_sysinfo_475 = bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass notes_plat_sysinfo_480 = TLB size : 192 4K pages notes_plat_sysinfo_485 = cpu cores : 128 notes_plat_sysinfo_490 = siblings : 128 notes_plat_sysinfo_495 = 2 physical ids (chips) notes_plat_sysinfo_500 = 256 processors (hardware threads) notes_plat_sysinfo_505 = physical id 0: core ids notes_plat_sysinfo_510 = 0-7,16-23,32-39,48-55,64-71,80-87,96-103,112-119,128-135,144-151,160-167,176-183,192-199,208-215,224-231, notes_plat_sysinfo_515 = 240-247 notes_plat_sysinfo_520 = physical id 1: core ids notes_plat_sysinfo_525 = 0-7,16-23,32-39,48-55,64-71,80-87,96-103,112-119,128-135,144-151,160-167,176-183,192-199,208-215,224-231, notes_plat_sysinfo_530 = 240-247 notes_plat_sysinfo_535 = physical id 0: apicids notes_plat_sysinfo_540 = 0-7,16-23,32-39,48-55,64-71,80-87,96-103,112-119,128-135,144-151,160-167,176-183,192-199,208-215,224-231, notes_plat_sysinfo_545 = 240-247 notes_plat_sysinfo_550 = physical id 1: apicids notes_plat_sysinfo_555 = 256-263,272-279,288-295,304-311,320-327,336-343,352-359,368-375,384-391,400-407,416-423,432-439,448-455,4 notes_plat_sysinfo_560 = 64-471,480-487,496-503 notes_plat_sysinfo_565 = Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for notes_plat_sysinfo_570 = virtualized systems. Use the above data carefully. notes_plat_sysinfo_575 = notes_plat_sysinfo_580 = ------------------------------------------------------------ notes_plat_sysinfo_585 = 7. lscpu notes_plat_sysinfo_590 = notes_plat_sysinfo_595 = From lscpu from util-linux 2.39.3: notes_plat_sysinfo_600 = Architecture: x86_64 notes_plat_sysinfo_605 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_610 = Address sizes: 46 bits physical, 57 bits virtual notes_plat_sysinfo_615 = Byte Order: Little Endian notes_plat_sysinfo_620 = CPU(s): 256 notes_plat_sysinfo_625 = On-line CPU(s) list: 0-255 notes_plat_sysinfo_630 = Vendor ID: AuthenticAMD notes_plat_sysinfo_635 = BIOS Vendor ID: Advanced Micro Devices, Inc. notes_plat_sysinfo_640 = Model name: AMD EPYC 9755 128-Core Processor notes_plat_sysinfo_645 = BIOS Model name: AMD EPYC 9755 128-Core Processor Unknown CPU @ 2.7GHz notes_plat_sysinfo_650 = BIOS CPU family: 107 notes_plat_sysinfo_655 = CPU family: 26 notes_plat_sysinfo_660 = Model: 2 notes_plat_sysinfo_665 = Thread(s) per core: 1 notes_plat_sysinfo_670 = Core(s) per socket: 128 notes_plat_sysinfo_675 = Socket(s): 2 notes_plat_sysinfo_680 = Stepping: 1 notes_plat_sysinfo_685 = Frequency boost: enabled notes_plat_sysinfo_690 = CPU(s) scaling MHz: 67% notes_plat_sysinfo_695 = CPU max MHz: 4121.1909 notes_plat_sysinfo_700 = CPU min MHz: 1500.0000 notes_plat_sysinfo_705 = BogoMIPS: 5392.30 notes_plat_sysinfo_710 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat notes_plat_sysinfo_715 = pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb notes_plat_sysinfo_720 = rdtscp lm constant_tsc rep_good amd_lbr_v2 nopl nonstop_tsc cpuid notes_plat_sysinfo_725 = extd_apicid aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 pcid notes_plat_sysinfo_730 = sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm notes_plat_sysinfo_735 = cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch notes_plat_sysinfo_740 = osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext notes_plat_sysinfo_745 = perfctr_llc mwaitx cpb cat_l3 cdp_l3 hw_pstate ssbd mba perfmon_v2 notes_plat_sysinfo_750 = ibrs ibpb stibp ibrs_enhanced vmmcall fsgsbase tsc_adjust bmi1 avx2 notes_plat_sysinfo_755 = smep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap notes_plat_sysinfo_760 = avx512ifma clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt notes_plat_sysinfo_765 = xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total notes_plat_sysinfo_770 = cqm_mbm_local user_shstk avx_vnni avx512_bf16 clzero irperf notes_plat_sysinfo_775 = xsaveerptr rdpru wbnoinvd amd_ppin cppc arat npt lbrv svm_lock notes_plat_sysinfo_780 = nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter notes_plat_sysinfo_785 = pfthreshold avic v_vmsave_vmload vgif x2avic v_spec_ctrl vnmi notes_plat_sysinfo_790 = avx512vbmi umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq notes_plat_sysinfo_795 = avx512_vnni avx512_bitalg avx512_vpopcntdq la57 rdpid bus_lock_detect notes_plat_sysinfo_800 = movdiri movdir64b overflow_recov succor smca fsrm avx512_vp2intersect notes_plat_sysinfo_805 = flush_l1d sev sev_es debug_swap notes_plat_sysinfo_810 = Virtualization: AMD-V notes_plat_sysinfo_815 = L1d cache: 12 MiB (256 instances) notes_plat_sysinfo_820 = L1i cache: 8 MiB (256 instances) notes_plat_sysinfo_825 = L2 cache: 256 MiB (256 instances) notes_plat_sysinfo_830 = L3 cache: 1 GiB (32 instances) notes_plat_sysinfo_835 = NUMA node(s): 2 notes_plat_sysinfo_840 = NUMA node0 CPU(s): 0-127 notes_plat_sysinfo_845 = NUMA node1 CPU(s): 128-255 notes_plat_sysinfo_850 = Vulnerability Gather data sampling: Not affected notes_plat_sysinfo_855 = Vulnerability Itlb multihit: Not affected notes_plat_sysinfo_860 = Vulnerability L1tf: Not affected notes_plat_sysinfo_865 = Vulnerability Mds: Not affected notes_plat_sysinfo_870 = Vulnerability Meltdown: Not affected notes_plat_sysinfo_875 = Vulnerability Mmio stale data: Not affected notes_plat_sysinfo_880 = Vulnerability Reg file data sampling: Not affected notes_plat_sysinfo_885 = Vulnerability Retbleed: Not affected notes_plat_sysinfo_890 = Vulnerability Spec rstack overflow: Not affected notes_plat_sysinfo_895 = Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl notes_plat_sysinfo_900 = Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization notes_plat_sysinfo_905 = Vulnerability Spectre v2: Mitigation; Enhanced / Automatic IBRS; IBPB conditional; STIBP notes_plat_sysinfo_910 = disabled; RSB filling; PBRSB-eIBRS Not affected; BHI Not affected notes_plat_sysinfo_915 = Vulnerability Srbds: Not affected notes_plat_sysinfo_920 = Vulnerability Tsx async abort: Not affected notes_plat_sysinfo_925 = notes_plat_sysinfo_930 = From lscpu --cache: notes_plat_sysinfo_935 = NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE notes_plat_sysinfo_940 = L1d 48K 12M 12 Data 1 64 1 64 notes_plat_sysinfo_945 = L1i 32K 8M 8 Instruction 1 64 1 64 notes_plat_sysinfo_950 = L2 1M 256M 16 Unified 2 1024 1 64 notes_plat_sysinfo_955 = L3 32M 1G 16 Unified 3 32768 1 64 notes_plat_sysinfo_960 = notes_plat_sysinfo_965 = ------------------------------------------------------------ notes_plat_sysinfo_970 = 8. numactl --hardware notes_plat_sysinfo_975 = NOTE: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_980 = available: 2 nodes (0-1) notes_plat_sysinfo_985 = node 0 cpus: 0-127 notes_plat_sysinfo_990 = node 0 size: 773506 MB notes_plat_sysinfo_995 = node 0 free: 770850 MB notes_plat_sysinfo_1000= node 1 cpus: 128-255 notes_plat_sysinfo_1005= node 1 size: 773548 MB notes_plat_sysinfo_1010= node 1 free: 772515 MB notes_plat_sysinfo_1015= node distances: notes_plat_sysinfo_1020= node 0 1 notes_plat_sysinfo_1025= 0: 10 32 notes_plat_sysinfo_1030= 1: 32 10 notes_plat_sysinfo_1035= notes_plat_sysinfo_1040= ------------------------------------------------------------ notes_plat_sysinfo_1045= 9. /proc/meminfo notes_plat_sysinfo_1050= MemTotal: 1584185284 kB notes_plat_sysinfo_1055= notes_plat_sysinfo_1060= ------------------------------------------------------------ notes_plat_sysinfo_1065= 10. who -r notes_plat_sysinfo_1070= run-level 3 Sep 21 20:56 notes_plat_sysinfo_1075= notes_plat_sysinfo_1080= ------------------------------------------------------------ notes_plat_sysinfo_1085= 11. Systemd service manager version: systemd 254 (254.10+suse.84.ge8d77af424) notes_plat_sysinfo_1090= Default Target Status notes_plat_sysinfo_1095= multi-user running notes_plat_sysinfo_1100= notes_plat_sysinfo_1105= ------------------------------------------------------------ notes_plat_sysinfo_1110= 12. Services, from systemctl list-unit-files notes_plat_sysinfo_1115= STATE UNIT FILES notes_plat_sysinfo_1120= enabled YaST2-Firstboot YaST2-Second-Stage apparmor auditd cron display-manager getty@ irqbalance notes_plat_sysinfo_1125= issue-generator kbdsettings kdump kdump-early kdump-notify klog lvm2-monitor nscd notes_plat_sysinfo_1130= nvmefc-boot-connections nvmf-autoconnect postfix purge-kernels rollback rsyslog smartd notes_plat_sysinfo_1135= sshd systemd-pstore tuned wicked wickedd-auto4 wickedd-dhcp4 wickedd-dhcp6 wickedd-nanny notes_plat_sysinfo_1140= enabled-runtime systemd-remount-fs notes_plat_sysinfo_1145= disabled autofs autoyast-initscripts blk-availability boot-sysctl ca-certificates chrony-wait notes_plat_sysinfo_1150= chronyd console-getty cups cups-browsed debug-shell ebtables exchange-bmc-os-info notes_plat_sysinfo_1155= firewalld fsidd gpm grub2-once haveged hwloc-dump-hwdata ipmi ipmievd issue-add-ssh-keys notes_plat_sysinfo_1160= kexec-load lunmask man-db-create multipathd nfs nfs-blkmap rpcbind rpmconfigcheck rsyncd notes_plat_sysinfo_1165= serial-getty@ smartd_generate_opts snmpd snmptrapd systemd-boot-check-no-failures notes_plat_sysinfo_1170= systemd-confext systemd-network-generator systemd-sysext systemd-time-wait-sync notes_plat_sysinfo_1175= systemd-timesyncd udisks2 vncserver@ notes_plat_sysinfo_1180= indirect systemd-userdbd wickedd notes_plat_sysinfo_1185= notes_plat_sysinfo_1190= ------------------------------------------------------------ notes_plat_sysinfo_1195= 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_1200= BOOT_IMAGE=/boot/vmlinuz-6.4.0-150600.21-default notes_plat_sysinfo_1205= root=UUID=9ae404da-0a61-4418-8525-a9b59a721b9d notes_plat_sysinfo_1210= mitigations=auto notes_plat_sysinfo_1215= quiet notes_plat_sysinfo_1220= security=apparmor notes_plat_sysinfo_1225= crashkernel=371M,high notes_plat_sysinfo_1230= crashkernel=72M,low notes_plat_sysinfo_1235= notes_plat_sysinfo_1240= ------------------------------------------------------------ notes_plat_sysinfo_1245= 14. cpupower frequency-info notes_plat_sysinfo_1250= analyzing CPU 82: notes_plat_sysinfo_1255= current policy: frequency should be within 1.50 GHz and 2.70 GHz. notes_plat_sysinfo_1260= The governor "performance" may decide which speed to use notes_plat_sysinfo_1265= within this range. notes_plat_sysinfo_1270= boost state support: notes_plat_sysinfo_1275= Supported: yes notes_plat_sysinfo_1280= Active: yes notes_plat_sysinfo_1285= notes_plat_sysinfo_1290= ------------------------------------------------------------ notes_plat_sysinfo_1295= 15. tuned-adm active notes_plat_sysinfo_1300= Current active profile: throughput-performance notes_plat_sysinfo_1305= notes_plat_sysinfo_1310= ------------------------------------------------------------ notes_plat_sysinfo_1315= 16. sysctl notes_plat_sysinfo_1320= kernel.numa_balancing 1 notes_plat_sysinfo_1325= kernel.randomize_va_space 0 notes_plat_sysinfo_1330= vm.compaction_proactiveness 20 notes_plat_sysinfo_1335= vm.dirty_background_bytes 0 notes_plat_sysinfo_1340= vm.dirty_background_ratio 10 notes_plat_sysinfo_1345= vm.dirty_bytes 0 notes_plat_sysinfo_1350= vm.dirty_expire_centisecs 3000 notes_plat_sysinfo_1355= vm.dirty_ratio 8 notes_plat_sysinfo_1360= vm.dirty_writeback_centisecs 500 notes_plat_sysinfo_1365= vm.dirtytime_expire_seconds 43200 notes_plat_sysinfo_1370= vm.extfrag_threshold 500 notes_plat_sysinfo_1375= vm.min_unmapped_ratio 1 notes_plat_sysinfo_1380= vm.nr_hugepages 0 notes_plat_sysinfo_1385= vm.nr_hugepages_mempolicy 0 notes_plat_sysinfo_1390= vm.nr_overcommit_hugepages 0 notes_plat_sysinfo_1395= vm.swappiness 1 notes_plat_sysinfo_1400= vm.watermark_boost_factor 15000 notes_plat_sysinfo_1405= vm.watermark_scale_factor 10 notes_plat_sysinfo_1410= vm.zone_reclaim_mode 1 notes_plat_sysinfo_1415= notes_plat_sysinfo_1420= ------------------------------------------------------------ notes_plat_sysinfo_1425= 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_1430= defrag [always] defer defer+madvise madvise never notes_plat_sysinfo_1435= enabled [always] madvise never notes_plat_sysinfo_1440= hpage_pmd_size 2097152 notes_plat_sysinfo_1445= shmem_enabled always within_size advise [never] deny force notes_plat_sysinfo_1450= notes_plat_sysinfo_1455= ------------------------------------------------------------ notes_plat_sysinfo_1460= 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_1465= alloc_sleep_millisecs 60000 notes_plat_sysinfo_1470= defrag 1 notes_plat_sysinfo_1475= max_ptes_none 511 notes_plat_sysinfo_1480= max_ptes_shared 256 notes_plat_sysinfo_1485= max_ptes_swap 64 notes_plat_sysinfo_1490= pages_to_scan 4096 notes_plat_sysinfo_1495= scan_sleep_millisecs 10000 notes_plat_sysinfo_1500= notes_plat_sysinfo_1505= ------------------------------------------------------------ notes_plat_sysinfo_1510= 19. OS release notes_plat_sysinfo_1515= From /etc/*-release /etc/*-version notes_plat_sysinfo_1520= os-release SUSE Linux Enterprise Server 15 SP6 notes_plat_sysinfo_1525= notes_plat_sysinfo_1530= ------------------------------------------------------------ notes_plat_sysinfo_1535= 20. Disk information notes_plat_sysinfo_1540= SPEC is set to: /root/cpu2017-speedF notes_plat_sysinfo_1545= Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_1550= /dev/nvme0n1p1 btrfs 717G 145G 572G 21% /root notes_plat_sysinfo_1555= notes_plat_sysinfo_1560= ------------------------------------------------------------ notes_plat_sysinfo_1565= 21. /sys/devices/virtual/dmi/id notes_plat_sysinfo_1570= Vendor: Quanta Cloud Technology Inc. notes_plat_sysinfo_1575= Product: QuantaGrid D44N-1U notes_plat_sysinfo_1580= notes_plat_sysinfo_1585= ------------------------------------------------------------ notes_plat_sysinfo_1590= 22. dmidecode notes_plat_sysinfo_1595= Additional information from dmidecode 3.4 follows. WARNING: Use caution when you interpret this section. notes_plat_sysinfo_1600= The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_1605= determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the notes_plat_sysinfo_1610= "DMTF SMBIOS" standard. notes_plat_sysinfo_1615= Memory: notes_plat_sysinfo_1620= 24x Samsung M321R8GA0PB2-CCPKC 64 GB 2 rank 6400, configured at 6000 notes_plat_sysinfo_1625= notes_plat_sysinfo_1630= notes_plat_sysinfo_1635= ------------------------------------------------------------ notes_plat_sysinfo_1640= 23. BIOS notes_plat_sysinfo_1645= (This section combines info from /sys/devices and dmidecode.) notes_plat_sysinfo_1650= BIOS Vendor: American Megatrends International, LLC. notes_plat_sysinfo_1655= BIOS Version: 3B02 notes_plat_sysinfo_1660= BIOS Date: 09/09/2024 notes_plat_sysinfo_1665= BIOS Revision: 5.35 notes_plat_sysinfo_1670= Firmware Revision: 5.3 hw_cpu_name = AMD EPYC 9755 hw_disk = 717 GB add more disk info here hw_memory001 = 1510.797 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 2 hw_ncores = 256 hw_nthreadspercore = 1 prepared_by = root (is never output, only tags rawfile) sw_file = btrfs sw_os001 = SUSE Linux Enterprise Server 15 SP6 sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: power_management000 = BIOS and OS set to prefer performance at the cost power_management001 = of additional power usage notes_plat_000 =BIOS Configuration notes_plat_005 = ACPI CST C2 Latency set to 18 notes_plat_010 = SMT Control set to Disable notes_plat_015 = Determinism Control is Manual notes_plat_020 = Determinism Slider set to Power notes_plat_025 = cTDP Control set to Manual notes_plat_030 = cTDP set to 500 notes_plat_035 = PPT Control set to Manual notes_plat_040 = PPT set to 500