# Invocation command line: # /home/cpu2017/bin/harness/runcpu --configfile amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 --nopower --runmode speed --tune base:peak --size test:train:refspeed intspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 400 SPEC CPU 2017 V1.1.9 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc400_znver4_A1.cfg # Creation Date : April 16, 2023 # CPU 2017 Version : 1.1.9 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC 4.0.0 # Operating system version : RHEL 8.6 # Supported OS's : Ubuntu 22.04, RHEL 8.6/9, SLE 15 SP4 # Hardware : AMD znver4 (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 64-bit # Auto Parallelization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc400_znver4_A1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU 2017 under optimized conditions on AMD znver4-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD znver4 microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc400_znver4_A1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on one socket AMD # znver4-based servers with 96 cores, SMT enabled and 768 (64x12) GB of DDR5 # memory distributed evenly among all 12 channels using 64 GiB DIMMs. # # To run the binary package on other znver4 configurations, please review # "Readme.amd_speed_aocc400_znver4_A1.txt". In general, znver4 CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc400_znver4_A1.cfg" or any # other file besides "ini_amd_speed_aocc400_znver4_A1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 22.04, RHEL 8.6/9, and SLE 15 SP4. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Modifiable macros: ################################################################################ # "allow_build"" switch: # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc400 %define binary_package_name amd_speed_%{compiler_name}_znver4_A %define binary_package_ext %{binary_package_name} %define binary_package_revision 1 %define build_path ${SPEC} %define flags_file_name %{compiler_name}-flags.xml # Do NOT change build_lib_dir after the build or it will trigger a # rebuild of the xalanc. It should also remain literal: %define build_lib_dir amd_speed_aocc400_znver4_A_lib # To enable the platform file, be sure to uncomment the flagsurl02 header line # below in the Header settings. %define platform_file_name INVALID_platform_%{binary_package_name}.xml ################################################################################ # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc %define flags_inc_file_name %{binary_package_full_name}_flags.inc # Binary label extension: # Only modify the binary label extension if you plan to rebuild the binaries. # If you plan to recompile these CPU 2017 binaries, please choose a new extension # name below to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true above. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Note that AMD calls an external script to set up the compiler and library # paths before initiating the build. %define ext %{binary_package_ext} ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # retain:true is necessary to avoid gcc out-of-memory exceptions on certain SUTs: # oversize_threshold is required to support jemalloc 5.2.x+ preENV_MALLOC_CONF = oversize_threshold:0,retain:true preENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 0 # OpenMP environment variables: preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false preENV_OMP_STACKSIZE = 128M # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib:%{ENV_LD_LIBRARY_PATH} %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_znver4_A1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc400_znver4_A1.inc # File generation code date: October 11, 2022 # File generation date/time: August 07, 2024 / 08:30:42 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 224 %define physical_core_count 224 %define physical_core_max 223 %define logical_core_max 223 ################################################################################ ################################################################################ # The following inc blocks set the speed thread counts and affinity settings. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # # Selected thread counts from '9734' section of CPU info ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 224 preENV_GOMP_CPU_AFFINITY = 0-223 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 224 ENV_GOMP_CPU_AFFINITY = 0-223 bind0 = numactl --physcpubind=0-223 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 224 ENV_GOMP_CPU_AFFINITY = 0-223 bind0 = numactl --physcpubind=0-223 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 15 bind0 = numactl --physcpubind=15 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 224 603.bwaves_s,619.lbm_s,621.wrf_s,628.pop2_s,649.fotonik3d_s=peak: threads = 224 ENV_GOMP_CPU_AFFINITY = 0-223 bind0 = numactl --physcpubind=0-223 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 224 607.cactuBSSN_s,627.cam4_s,638.imagick_s,644.nab_s,657.xz_s=peak: threads = 224 ENV_GOMP_CPU_AFFINITY = 0-223 bind0 = numactl --physcpubind=0-223 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 224 654.roms_s=peak: threads = 224 ENV_GOMP_CPU_AFFINITY = 0 112 1 113 2 114 3 115 4 116 5 117 6 118 7 119 8 120 9 121 10 122 11 123 12 124 13 125 14 126 15 127 16 128 17 129 18 130 19 131 20 132 21 133 22 134 23 135 24 136 25 137 26 138 27 139 28 140 29 141 30 142 31 143 32 144 33 145 34 146 35 147 36 148 37 149 38 150 39 151 40 152 41 153 42 154 43 155 44 156 45 157 46 158 47 159 48 160 49 161 50 162 51 163 52 164 53 165 54 166 55 167 56 168 57 169 58 170 59 171 60 172 61 173 62 174 63 175 64 176 65 177 66 178 67 179 68 180 69 181 70 182 71 183 72 184 73 185 74 186 75 187 76 188 77 189 78 190 79 191 80 192 81 193 82 194 83 195 84 196 85 197 86 198 87 199 88 200 89 201 90 202 91 203 92 204 93 205 94 206 95 207 96 208 97 209 98 210 99 211 100 212 101 213 102 214 103 215 104 216 105 217 106 218 107 219 108 220 109 221 110 222 111 223 bind0 = numactl --physcpubind=0-223 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =9019 tester =Cisco Systems test_sponsor =Cisco Systems hw_vendor =Cisco Systems hw_model000 =Cisco UCS C245 M8 (AMD EPYC 9734 112 -Core hw_model001 =Processor) #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 4.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Jun-2024 sw_avail =Jun-2023 hw_cpu_name =AMD EPYC 9734 hw_cpu_nominal_mhz =2200 hw_cpu_max_mhz =3000 hw_ncores =224 hw_nthreadspercore =1 hw_ncpuorder =1,2 chips hw_other =CPU Cooling: Air fw_bios =Version 4.3.4a released May-2024 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =1 MB I+D on chip per core hw_tcache000 =256 MB I+D on chip per chip, 16 MB shared / 7 hw_tcache001 = cores hw_ocache =None sw_other =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 9174F CPU + 1.5TiB Memory using RHEL 8.6 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 = notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_035 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_040 =To free node-local memory and avoid remote memory usage, notes_os_045 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_050 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_055 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_060 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. notes_os_065 = notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = # notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) # notes_jemalloc_005 =jemalloc 5.1.0 is available here: # notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 # notes_jemalloc_015 = # sw_other000 =jemalloc: jemalloc memory allocator library v5.1.0 ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (edit and uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = TDP: 400 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = PPT: 400 # notes_plat_010 = NPS: 4 # notes_plat_011 = Workload Profile = CPU Intensive # notes_plat_012 = TSME = Disabled # notes_plat_014 = SEV Control = Disabled # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intspeed: sw_peak_ptrsize =64-bit notes_os_thp_015 = ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fpspeed: sw_peak_ptrsize =64-bit notes_os_thp_003 =To always enable THP for peak runs of: notes_os_thp_004 =603.bwaves_s, 607.cactuBSSN_s, 619.lbm_s, 627.cam4_s, 628.pop2_s, 638.imagick_s, 644.nab_s, 649.fotonik3d_s: notes_os_thp_005 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_006 =run as root. notes_os_thp_007 =To disable THP for peak runs of 621.wrf_s: notes_os_thp_008 ='echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_009 =run as root. notes_os_thp_010 =To enable THP only on request for peak runs of 654.roms_s: notes_os_thp_011 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_012 =run as root. ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =1 x 1.6 TB NVME SSD hw_memory000 =1536 GB (24 x 64 GB 2Rx4 PC5-5600B-R, hw_memory001 =running at 4800) hw_memory002 = hw_nchips =2 prepared_by =Cisco Systems sw_file =btrfs sw_os000 =SUSE Linux Enterprise Server 15 SP5 sw_os001 =kernel version # ex: Kernel 4.4.0-87-generic sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/home/cpu2017/config/amd_speed_aocc400_znver4_A1.inc' # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib:%{ENV_LIBRARY_PATH} % define build_ncpus 16 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/aocc400-flags.xml flagsurl001 = http://www.spec.org/cpu2017/flags/Cisco-Platform-Settings-AMD-v3-revA.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ # Include the flags file: ################################################################################ #include: %{flags_inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_znver4_A1_flags.inc' ############################################################################ ################################################################################ # AMD AOCC 4.0.0 SPEC CPU2017 V1.1.8 Speed Configuration Flags for AMD64 Linux ################################################################################ # Compilers ################################################################################ default: CC = clang -m64 CXX = clang++ -m64 FC = flang -m64 CLD = clang -m64 CXXLD = clang++ -m64 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default: # data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # Default libraries and variables ################################################################################ default: # Libraries: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdalloc \ -lamdlibm \ -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM # Variables: OPT_ROOT = -march=znver4 \ $(VECMATHLIB) \ -ffast-math \ -fopenmp OPT_ROOT_BASE = -O3 \ $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast \ $(OPT_ROOT) \ -flto THP_ALWAYS = echo always > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag THP_NEVER = echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo never > /sys/kernel/mm/transparent_hugepage/defrag THP_MADVISE = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag DEFAULT_SUBMIT = echo "$command" > run.sh ; $BIND bash run.sh ############################################################################### # AOCC 4.0.0 workarounds that do not count as PORTABILITY ################################################################################ # The workarounds in this section would not qualify under the SPEC CPU # PORTABILITY rule. # - In peak, they can be set as needed for individual benchmarks. # - In base, individual settings are not allowed; set for whole suite. # Use EXTRA_CFLAGS, EXTRA_CXXFLAGS, and EXTRA_FFLAGS for them. # # See: # https://www.spec.org/cpu2017/Docs/runrules.html#portability # https://www.spec.org/cpu2017/Docs/runrules.html#BaseFlags ####################### # Default workarounds # ####################### default: # Allow unused compile/link arguments without triggering warnings during build: EXTRA_CFLAGS = -Wno-unused-command-line-argument EXTRA_CXXFLAGS = -Wno-unused-command-line-argument EXTRA_FFLAGS = -Wno-unused-command-line-argument LDOPTIONS = -Wno-unused-command-line-argument #################### # Base workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - base # ############################## intrate=base: # The following is necessary for 602 gcc: EXTRA_LDFLAGS = -z muldefs ######################### # FP workarounds - base # ######################### # # *** NONE *** # #################### # Peak workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - peak # ############################## 602.gcc_s=peak: #lang='C' EXTRA_LDFLAGS = -z muldefs ##################################### # Floating Point workarounds - peak # ##################################### # # *** NONE *** # ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -fstruct-layout=7 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 \ -fremap-arrays \ -fstrip-mining \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -unroll-threshold=100 \ -finline-aggressive \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching #other libraries # Put OpenMP and math libraries here: # -lm needed at the end for some transcendental functions: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = ######################### # intspeed tuning flags # ######################### intspeed: FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -optimize-strided-mem-cost EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 EXTRA_CXXFLAGS = -fvirtual-function-elimination \ -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition LDCXXFLAGS = LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split ############################## # intspeed base tuning flags # ############################## intspeed=base: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lflang \ -lm EXTRA_CLIBS = -lamdalloc EXTRA_CXXLIBS = -lamdalloc-ext EXTRA_FLIBS = -lamdalloc submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################## # intspeed peak tuning flags # ############################## intspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed base tuning flags # ############################# fpspeed=base: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed peak tuning flags # ############################# fpspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=9 \ -mllvm -unroll-threshold=50 \ -fremap-arrays \ -fstrip-mining \ -mllvm -inline-threshold=1000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_PEAK) -finline-aggressive \ -mllvm -unroll-threshold=100 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw # Benchmark specific peak tuning flags: 603.bwaves_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 607.cactuBSSN_s=peak: #lang='CXX,C,F' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 619.lbm_s=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 620.omnetpp_s=peak: #lang='CXX' EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang -lm 621.wrf_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT_BASE) \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt submit = ${THP_NEVER}; ${DEFAULT_SUBMIT} 623.xalancbmk_s=peak: #lang='CXX' EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 \ -Wl,-mllvm -Wl,-do-block-reorder=aggressive EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang \ -lm 627.cam4_s=peak: #lang='F,C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 628.pop2_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT) \ -Ofast \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 638.imagick_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 644.nab_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-region-vectorize submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 649.fotonik3d_s=peak: #lang='F' ENV_PGHPF_ZMEM = yes submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 654.roms_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_MADVISE}; ${DEFAULT_SUBMIT} 657.xz_s=peak: #lang='C' ENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 8 # ---- End inclusion of '/home/cpu2017/config/amd_speed_aocc400_znver4_A1_flags.inc' # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:2eb381fc1a58eb8122e4a1b875c1e38b3489dac84088192aa0ec6d157b084d06) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /home/cpu2017/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197 notes_plat_sysinfo_015 = running on localhost Wed Aug 7 08:31:03 2024 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = notes_plat_sysinfo_035 = ------------------------------------------------------------ notes_plat_sysinfo_040 = Table of contents notes_plat_sysinfo_045 = ------------------------------------------------------------ notes_plat_sysinfo_050 = 1. uname -a notes_plat_sysinfo_055 = 2. w notes_plat_sysinfo_060 = 3. Username notes_plat_sysinfo_065 = 4. ulimit -a notes_plat_sysinfo_070 = 5. sysinfo process ancestry notes_plat_sysinfo_075 = 6. /proc/cpuinfo notes_plat_sysinfo_080 = 7. lscpu notes_plat_sysinfo_085 = 8. numactl --hardware notes_plat_sysinfo_090 = 9. /proc/meminfo notes_plat_sysinfo_095 = 10. who -r notes_plat_sysinfo_100 = 11. Systemd service manager version: systemd 249 (249.16+suse.171.gdad0071f15) notes_plat_sysinfo_105 = 12. Services, from systemctl list-unit-files notes_plat_sysinfo_110 = 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_115 = 14. cpupower frequency-info notes_plat_sysinfo_120 = 15. sysctl notes_plat_sysinfo_125 = 16. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_130 = 17. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_135 = 18. OS release notes_plat_sysinfo_140 = 19. Disk information notes_plat_sysinfo_145 = 20. /sys/devices/virtual/dmi/id notes_plat_sysinfo_150 = 21. dmidecode notes_plat_sysinfo_155 = 22. BIOS notes_plat_sysinfo_160 = ------------------------------------------------------------ notes_plat_sysinfo_165 = notes_plat_sysinfo_170 = ------------------------------------------------------------ notes_plat_sysinfo_175 = 1. uname -a notes_plat_sysinfo_180 = Linux localhost 5.14.21-150500.53-default #1 SMP PREEMPT_DYNAMIC Wed May 10 07:56:26 UTC 2023 (b630043) notes_plat_sysinfo_185 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = ------------------------------------------------------------ notes_plat_sysinfo_200 = 2. w notes_plat_sysinfo_205 = 08:31:03 up 1 min, 1 user, load average: 0.65, 0.25, 0.09 notes_plat_sysinfo_210 = USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT notes_plat_sysinfo_215 = root tty1 - 08:30 39.00s 1.36s 0.11s /bin/bash ./amd_speed_aocc400_znver4_A1.sh notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = ------------------------------------------------------------ notes_plat_sysinfo_230 = 3. Username notes_plat_sysinfo_235 = From environment variable $USER: root notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = ------------------------------------------------------------ notes_plat_sysinfo_250 = 4. ulimit -a notes_plat_sysinfo_255 = core file size (blocks, -c) unlimited notes_plat_sysinfo_260 = data seg size (kbytes, -d) unlimited notes_plat_sysinfo_265 = scheduling priority (-e) 0 notes_plat_sysinfo_270 = file size (blocks, -f) unlimited notes_plat_sysinfo_275 = pending signals (-i) 6191095 notes_plat_sysinfo_280 = max locked memory (kbytes, -l) 2097152 notes_plat_sysinfo_285 = max memory size (kbytes, -m) unlimited notes_plat_sysinfo_290 = open files (-n) 1024 notes_plat_sysinfo_295 = pipe size (512 bytes, -p) 8 notes_plat_sysinfo_300 = POSIX message queues (bytes, -q) 819200 notes_plat_sysinfo_305 = real-time priority (-r) 0 notes_plat_sysinfo_310 = stack size (kbytes, -s) unlimited notes_plat_sysinfo_315 = cpu time (seconds, -t) unlimited notes_plat_sysinfo_320 = max user processes (-u) 6191095 notes_plat_sysinfo_325 = virtual memory (kbytes, -v) unlimited notes_plat_sysinfo_330 = file locks (-x) unlimited notes_plat_sysinfo_335 = notes_plat_sysinfo_340 = ------------------------------------------------------------ notes_plat_sysinfo_345 = 5. sysinfo process ancestry notes_plat_sysinfo_350 = /usr/lib/systemd/systemd --switched-root --system --deserialize 30 notes_plat_sysinfo_355 = login -- root notes_plat_sysinfo_360 = -bash notes_plat_sysinfo_365 = python3 ./run_amd_speed_aocc400_znver4_A1.py -b intspeed notes_plat_sysinfo_370 = /bin/bash ./amd_speed_aocc400_znver4_A1.sh notes_plat_sysinfo_375 = runcpu --config amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 intspeed notes_plat_sysinfo_380 = runcpu --configfile amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 --nopower notes_plat_sysinfo_385 = --runmode speed --tune base:peak --size test:train:refspeed intspeed --nopreenv --note-preenv --logfile notes_plat_sysinfo_390 = $SPEC/tmp/CPU2017.001/templogs/preenv.intspeed.001.0.log --lognum 001.0 --from_runcpu 2 notes_plat_sysinfo_395 = specperl $SPEC/bin/sysinfo notes_plat_sysinfo_400 = $SPEC = /home/cpu2017 notes_plat_sysinfo_405 = notes_plat_sysinfo_410 = ------------------------------------------------------------ notes_plat_sysinfo_415 = 6. /proc/cpuinfo notes_plat_sysinfo_420 = model name : AMD EPYC 9734 112-Core Processor notes_plat_sysinfo_425 = vendor_id : AuthenticAMD notes_plat_sysinfo_430 = cpu family : 25 notes_plat_sysinfo_435 = model : 160 notes_plat_sysinfo_440 = stepping : 2 notes_plat_sysinfo_445 = microcode : 0xaa00215 notes_plat_sysinfo_450 = bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass notes_plat_sysinfo_455 = TLB size : 3584 4K pages notes_plat_sysinfo_460 = cpu cores : 112 notes_plat_sysinfo_465 = siblings : 112 notes_plat_sysinfo_470 = 2 physical ids (chips) notes_plat_sysinfo_475 = 224 processors (hardware threads) notes_plat_sysinfo_480 = physical id 0: core ids notes_plat_sysinfo_485 = 0-6,16-22,32-38,48-54,64-70,80-86,96-102,112-118,128-134,144-150,160-166,176-182,192-198,208-214,224-230, notes_plat_sysinfo_490 = 240-246 notes_plat_sysinfo_495 = physical id 1: core ids notes_plat_sysinfo_500 = 0-6,16-22,32-38,48-54,64-70,80-86,96-102,112-118,128-134,144-150,160-166,176-182,192-198,208-214,224-230, notes_plat_sysinfo_505 = 240-246 notes_plat_sysinfo_510 = physical id 0: apicids notes_plat_sysinfo_515 = 0-6,16-22,32-38,48-54,64-70,80-86,96-102,112-118,128-134,144-150,160-166,176-182,192-198,208-214,224-230, notes_plat_sysinfo_520 = 240-246 notes_plat_sysinfo_525 = physical id 1: apicids notes_plat_sysinfo_530 = 256-262,272-278,288-294,304-310,320-326,336-342,352-358,368-374,384-390,400-406,416-422,432-438,448-454,4 notes_plat_sysinfo_535 = 64-470,480-486,496-502 notes_plat_sysinfo_540 = Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for notes_plat_sysinfo_545 = virtualized systems. Use the above data carefully. notes_plat_sysinfo_550 = notes_plat_sysinfo_555 = ------------------------------------------------------------ notes_plat_sysinfo_560 = 7. lscpu notes_plat_sysinfo_565 = notes_plat_sysinfo_570 = From lscpu from util-linux 2.37.4: notes_plat_sysinfo_575 = Architecture: x86_64 notes_plat_sysinfo_580 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_585 = Address sizes: 52 bits physical, 57 bits virtual notes_plat_sysinfo_590 = Byte Order: Little Endian notes_plat_sysinfo_595 = CPU(s): 224 notes_plat_sysinfo_600 = On-line CPU(s) list: 0-223 notes_plat_sysinfo_605 = Vendor ID: AuthenticAMD notes_plat_sysinfo_610 = Model name: AMD EPYC 9734 112-Core Processor notes_plat_sysinfo_615 = CPU family: 25 notes_plat_sysinfo_620 = Model: 160 notes_plat_sysinfo_625 = Thread(s) per core: 1 notes_plat_sysinfo_630 = Core(s) per socket: 112 notes_plat_sysinfo_635 = Socket(s): 2 notes_plat_sysinfo_640 = Stepping: 2 notes_plat_sysinfo_645 = Frequency boost: enabled notes_plat_sysinfo_650 = CPU max MHz: 2999.2180 notes_plat_sysinfo_655 = CPU min MHz: 1500.0000 notes_plat_sysinfo_660 = BogoMIPS: 4393.23 notes_plat_sysinfo_665 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 notes_plat_sysinfo_670 = clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm notes_plat_sysinfo_675 = constant_tsc rep_good amd_lbr_v2 nopl nonstop_tsc cpuid extd_apicid notes_plat_sysinfo_680 = aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 notes_plat_sysinfo_685 = x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm notes_plat_sysinfo_690 = extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt notes_plat_sysinfo_695 = tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 notes_plat_sysinfo_700 = cdp_l3 invpcid_single hw_pstate ssbd mba perfmon_v2 ibrs ibpb stibp notes_plat_sysinfo_705 = vmmcall fsgsbase bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a avx512f notes_plat_sysinfo_710 = avx512dq rdseed adx smap avx512ifma clflushopt clwb avx512cd sha_ni notes_plat_sysinfo_715 = avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc notes_plat_sysinfo_720 = cqm_mbm_total cqm_mbm_local avx512_bf16 clzero irperf xsaveerptr rdpru notes_plat_sysinfo_725 = wbnoinvd amd_ppin cppc arat npt lbrv svm_lock nrip_save tsc_scale notes_plat_sysinfo_730 = vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic notes_plat_sysinfo_735 = v_vmsave_vmload vgif v_spec_ctrl avx512vbmi umip pku ospke avx512_vbmi2 notes_plat_sysinfo_740 = gfni vaes vpclmulqdq avx512_vnni avx512_bitalg avx512_vpopcntdq la57 rdpid notes_plat_sysinfo_745 = overflow_recov succor smca fsrm flush_l1d notes_plat_sysinfo_750 = Virtualization: AMD-V notes_plat_sysinfo_755 = L1d cache: 7 MiB (224 instances) notes_plat_sysinfo_760 = L1i cache: 7 MiB (224 instances) notes_plat_sysinfo_765 = L2 cache: 224 MiB (224 instances) notes_plat_sysinfo_770 = L3 cache: 512 MiB (32 instances) notes_plat_sysinfo_775 = NUMA node(s): 2 notes_plat_sysinfo_780 = NUMA node0 CPU(s): 0-111 notes_plat_sysinfo_785 = NUMA node1 CPU(s): 112-223 notes_plat_sysinfo_790 = Vulnerability Itlb multihit: Not affected notes_plat_sysinfo_795 = Vulnerability L1tf: Not affected notes_plat_sysinfo_800 = Vulnerability Mds: Not affected notes_plat_sysinfo_805 = Vulnerability Meltdown: Not affected notes_plat_sysinfo_810 = Vulnerability Mmio stale data: Not affected notes_plat_sysinfo_815 = Vulnerability Retbleed: Not affected notes_plat_sysinfo_820 = Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl and seccomp notes_plat_sysinfo_825 = Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization notes_plat_sysinfo_830 = Vulnerability Spectre v2: Mitigation; Retpolines, IBPB conditional, IBRS_FW, STIBP disabled, RSB notes_plat_sysinfo_835 = filling, PBRSB-eIBRS Not affected notes_plat_sysinfo_840 = Vulnerability Srbds: Not affected notes_plat_sysinfo_845 = Vulnerability Tsx async abort: Not affected notes_plat_sysinfo_850 = notes_plat_sysinfo_855 = From lscpu --cache: notes_plat_sysinfo_860 = NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE notes_plat_sysinfo_865 = L1d 32K 7M 8 Data 1 64 1 64 notes_plat_sysinfo_870 = L1i 32K 7M 8 Instruction 1 64 1 64 notes_plat_sysinfo_875 = L2 1M 224M 8 Unified 2 2048 1 64 notes_plat_sysinfo_880 = L3 16M 512M 16 Unified 3 16384 1 64 notes_plat_sysinfo_885 = notes_plat_sysinfo_890 = ------------------------------------------------------------ notes_plat_sysinfo_895 = 8. numactl --hardware notes_plat_sysinfo_900 = NOTE: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_905 = available: 2 nodes (0-1) notes_plat_sysinfo_910 = node 0 cpus: 0-111 notes_plat_sysinfo_915 = node 0 size: 773780 MB notes_plat_sysinfo_920 = node 0 free: 772159 MB notes_plat_sysinfo_925 = node 1 cpus: 112-223 notes_plat_sysinfo_930 = node 1 size: 774023 MB notes_plat_sysinfo_935 = node 1 free: 772374 MB notes_plat_sysinfo_940 = node distances: notes_plat_sysinfo_945 = node 0 1 notes_plat_sysinfo_950 = 0: 10 32 notes_plat_sysinfo_955 = 1: 32 10 notes_plat_sysinfo_960 = notes_plat_sysinfo_965 = ------------------------------------------------------------ notes_plat_sysinfo_970 = 9. /proc/meminfo notes_plat_sysinfo_975 = MemTotal: 1584951024 kB notes_plat_sysinfo_980 = notes_plat_sysinfo_985 = ------------------------------------------------------------ notes_plat_sysinfo_990 = 10. who -r notes_plat_sysinfo_995 = run-level 3 Aug 7 08:30 notes_plat_sysinfo_1000= notes_plat_sysinfo_1005= ------------------------------------------------------------ notes_plat_sysinfo_1010= 11. Systemd service manager version: systemd 249 (249.16+suse.171.gdad0071f15) notes_plat_sysinfo_1015= Default Target Status notes_plat_sysinfo_1020= multi-user running notes_plat_sysinfo_1025= notes_plat_sysinfo_1030= ------------------------------------------------------------ notes_plat_sysinfo_1035= 12. Services, from systemctl list-unit-files notes_plat_sysinfo_1040= STATE UNIT FILES notes_plat_sysinfo_1045= enabled YaST2-Firstboot YaST2-Second-Stage apparmor auditd cron getty@ irqbalance iscsi notes_plat_sysinfo_1050= issue-generator kbdsettings klog libvirtd lvm2-monitor nscd postfix purge-kernels rollback notes_plat_sysinfo_1055= rsyslog smartd sshd systemd-pstore wicked wickedd-auto4 wickedd-dhcp4 wickedd-dhcp6 notes_plat_sysinfo_1060= wickedd-nanny notes_plat_sysinfo_1065= enabled-runtime systemd-remount-fs notes_plat_sysinfo_1070= disabled autofs autoyast-initscripts blk-availability boot-sysctl ca-certificates chrony-wait notes_plat_sysinfo_1075= chronyd console-getty cups cups-browsed debug-shell dnsmasq ebtables exchange-bmc-os-info notes_plat_sysinfo_1080= firewalld gpm grub2-once haveged haveged-switch-root hwloc-dump-hwdata ipmi ipmievd notes_plat_sysinfo_1085= iscsi-init iscsid issue-add-ssh-keys kdump kdump-early kexec-load ksm kvm_stat notes_plat_sysinfo_1090= libvirt-guests lunmask man-db-create multipathd nfs nfs-blkmap nfs-server nfsserver notes_plat_sysinfo_1095= rpcbind rpmconfigcheck rsyncd serial-getty@ smartd_generate_opts snmpd snmptrapd notes_plat_sysinfo_1100= strongswan strongswan-starter svnserve systemd-boot-check-no-failures notes_plat_sysinfo_1105= systemd-network-generator systemd-nspawn@ systemd-sysext systemd-time-wait-sync notes_plat_sysinfo_1110= systemd-timesyncd tcsd udisks2 virtinterfaced virtnetworkd virtnodedevd virtnwfilterd notes_plat_sysinfo_1115= virtproxyd virtqemud virtsecretd virtstoraged notes_plat_sysinfo_1120= indirect pcscd virtlockd virtlogd wickedd notes_plat_sysinfo_1125= notes_plat_sysinfo_1130= ------------------------------------------------------------ notes_plat_sysinfo_1135= 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_1140= BOOT_IMAGE=/boot/vmlinuz-5.14.21-150500.53-default notes_plat_sysinfo_1145= root=UUID=5eac0278-b5d7-4d70-9f22-3587a0d03dd8 notes_plat_sysinfo_1150= splash=silent notes_plat_sysinfo_1155= mitigations=auto notes_plat_sysinfo_1160= quiet notes_plat_sysinfo_1165= security=apparmor notes_plat_sysinfo_1170= notes_plat_sysinfo_1175= ------------------------------------------------------------ notes_plat_sysinfo_1180= 14. cpupower frequency-info notes_plat_sysinfo_1185= analyzing CPU 0: notes_plat_sysinfo_1190= current policy: frequency should be within 1.50 GHz and 2.20 GHz. notes_plat_sysinfo_1195= The governor "performance" may decide which speed to use notes_plat_sysinfo_1200= within this range. notes_plat_sysinfo_1205= boost state support: notes_plat_sysinfo_1210= Supported: yes notes_plat_sysinfo_1215= Active: yes notes_plat_sysinfo_1220= notes_plat_sysinfo_1225= ------------------------------------------------------------ notes_plat_sysinfo_1230= 15. sysctl notes_plat_sysinfo_1235= kernel.numa_balancing 1 notes_plat_sysinfo_1240= kernel.randomize_va_space 0 notes_plat_sysinfo_1245= vm.compaction_proactiveness 20 notes_plat_sysinfo_1250= vm.dirty_background_bytes 0 notes_plat_sysinfo_1255= vm.dirty_background_ratio 10 notes_plat_sysinfo_1260= vm.dirty_bytes 0 notes_plat_sysinfo_1265= vm.dirty_expire_centisecs 3000 notes_plat_sysinfo_1270= vm.dirty_ratio 8 notes_plat_sysinfo_1275= vm.dirty_writeback_centisecs 500 notes_plat_sysinfo_1280= vm.dirtytime_expire_seconds 43200 notes_plat_sysinfo_1285= vm.extfrag_threshold 500 notes_plat_sysinfo_1290= vm.min_unmapped_ratio 1 notes_plat_sysinfo_1295= vm.nr_hugepages 0 notes_plat_sysinfo_1300= vm.nr_hugepages_mempolicy 0 notes_plat_sysinfo_1305= vm.nr_overcommit_hugepages 0 notes_plat_sysinfo_1310= vm.swappiness 1 notes_plat_sysinfo_1315= vm.watermark_boost_factor 15000 notes_plat_sysinfo_1320= vm.watermark_scale_factor 10 notes_plat_sysinfo_1325= vm.zone_reclaim_mode 1 notes_plat_sysinfo_1330= notes_plat_sysinfo_1335= ------------------------------------------------------------ notes_plat_sysinfo_1340= 16. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_1345= defrag [always] defer defer+madvise madvise never notes_plat_sysinfo_1350= enabled [always] madvise never notes_plat_sysinfo_1355= hpage_pmd_size 2097152 notes_plat_sysinfo_1360= shmem_enabled always within_size advise [never] deny force notes_plat_sysinfo_1365= notes_plat_sysinfo_1370= ------------------------------------------------------------ notes_plat_sysinfo_1375= 17. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_1380= alloc_sleep_millisecs 60000 notes_plat_sysinfo_1385= defrag 1 notes_plat_sysinfo_1390= max_ptes_none 511 notes_plat_sysinfo_1395= max_ptes_shared 256 notes_plat_sysinfo_1400= max_ptes_swap 64 notes_plat_sysinfo_1405= pages_to_scan 4096 notes_plat_sysinfo_1410= scan_sleep_millisecs 10000 notes_plat_sysinfo_1415= notes_plat_sysinfo_1420= ------------------------------------------------------------ notes_plat_sysinfo_1425= 18. OS release notes_plat_sysinfo_1430= From /etc/*-release /etc/*-version notes_plat_sysinfo_1435= os-release SUSE Linux Enterprise Server 15 SP5 notes_plat_sysinfo_1440= notes_plat_sysinfo_1445= ------------------------------------------------------------ notes_plat_sysinfo_1450= 19. Disk information notes_plat_sysinfo_1455= SPEC is set to: /home/cpu2017 notes_plat_sysinfo_1460= Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_1465= /dev/sda2 btrfs 222G 11G 210G 5% /home notes_plat_sysinfo_1470= notes_plat_sysinfo_1475= ------------------------------------------------------------ notes_plat_sysinfo_1480= 20. /sys/devices/virtual/dmi/id notes_plat_sysinfo_1485= Vendor: Cisco Systems Inc notes_plat_sysinfo_1490= Product: UCSC-C245-M8SX notes_plat_sysinfo_1495= Serial: WZP27360C65 notes_plat_sysinfo_1500= notes_plat_sysinfo_1505= ------------------------------------------------------------ notes_plat_sysinfo_1510= 21. dmidecode notes_plat_sysinfo_1515= Additional information from dmidecode 3.4 follows. WARNING: Use caution when you interpret this section. notes_plat_sysinfo_1520= The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_1525= determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the notes_plat_sysinfo_1530= "DMTF SMBIOS" standard. notes_plat_sysinfo_1535= Memory: notes_plat_sysinfo_1540= 4x 0xCE00 M321R8GA0PB0-CWMJH 64 GB 2 rank 5600, configured at 4800 notes_plat_sysinfo_1545= 20x 0xCE00 M321R8GA0PB0-CWMKJ 64 GB 2 rank 5600, configured at 4800 notes_plat_sysinfo_1550= notes_plat_sysinfo_1555= notes_plat_sysinfo_1560= ------------------------------------------------------------ notes_plat_sysinfo_1565= 22. BIOS notes_plat_sysinfo_1570= (This section combines info from /sys/devices and dmidecode.) notes_plat_sysinfo_1575= BIOS Vendor: Cisco Systems, Inc. notes_plat_sysinfo_1580= BIOS Version: C245M8.4.3.4a.0.0520240849 notes_plat_sysinfo_1585= BIOS Date: 05/20/2024 notes_plat_sysinfo_1590= BIOS Revision: 5.27 hw_cpu_name = AMD EPYC 9734 hw_disk = 222 GB add more disk info here hw_memory001 = 1511.527 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 2 hw_ncores = 224 hw_nthreadspercore = 1 prepared_by = root (is never output, only tags rawfile) sw_file = btrfs sw_os001 = SUSE Linux Enterprise Server 15 SP5 sw_os002 = 5.14.21-150500.53-default sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program 648.exchange2_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 641.leela_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 631.deepsjeng_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 600.perlbench_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: power_management000 = BIOS and OS set to prefer performance power_management001 = at the cost of additional power usage. notes_plat_form_000 = notes_plat_form_005 =BIOS settings: notes_plat_form_010 =SMT Mode set to Disabled notes_plat_form_015 =NUMA nodes per socket set to NPS1 notes_plat_form_020 =Determinism Slider set to Power notes_plat_form_025 =DF C-States set to Disabled notes_plat_form_030 =TDP set to 400 notes_plat_form_035 =PPT set to 400