SPEC CPU®2017 Integer Speed Result

Copyright 2017-2024 Standard Performance Evaluation Corporation

Nettrix

R620 G50 (Intel Xeon Platinum 8570, 2.10 GHz)

SPECspeed®2017_int_base = 14.80

SPECspeed®2017_int_peak = 15.10

CPU2017 License: 6138 Test Date: Jun-2024
Test Sponsor: Nettrix Hardware Availability: Jan-2024
Tested by: Nettrix Software Availability: Jan-2024

Benchmark result graphs are available in the PDF report.

Hardware
CPU Name: Intel Xeon Platinum 8570
  Max MHz: 4000
  Nominal: 2100
Enabled: 112 cores, 2 chips
Orderable: 1,2 chips
Cache L1: 32 KB I + 48 KB D on chip per core
  L2: 2 MB I+D on chip per core
  L3: 300 MB I+D on chip per chip
  Other: None
Memory: 1 TB (16 x 64 GB 2Rx4 PC5-5600B-R)
Storage: 1 x 14 TB SATA HDD (7200 rpm)
Other: CPU Cooling: Air
Software
OS: SUSE Linux Enterprise Server 15 SP5
5.14.21-150500.53-default
Compiler: C/C++: Version 2023.2.3 of Intel oneAPI DPC++/C++
Compiler for Linux;
Fortran: Version 2023.2.3 of Intel Fortran
Compiler for Linux;
Parallel: Yes
Firmware: Nettrix BIOS Version NNH1041268 released Jan-2024
File System: xfs
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: 64-bit
Other: jemalloc memory allocator V5.0.1
Power Management: BIOS and OS set to prefer performance at the cost
of additional power usage

Results Table

Benchmark Base Peak
Threads Seconds Ratio Seconds Ratio Seconds Ratio Threads Seconds Ratio Seconds Ratio Seconds Ratio
SPECspeed®2017_int_base 14.80
SPECspeed®2017_int_peak 15.10
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
600.perlbench_s 112 1800 9.86 1790 9.93 1800 9.89 112 1630 10.90 1630 10.90 1620 11.00
602.gcc_s 112 3110 12.80 3080 12.90 3120 12.70 112 2950 13.50 2950 13.50 2920 13.60
605.mcf_s 112 1970 23.90 1980 23.90 1980 23.80 112 1970 23.90 1980 23.90 1980 23.80
620.omnetpp_s 112 1230 13.30 1220 13.30 1230 13.20 112 1230 13.30 1220 13.30 1230 13.20
623.xalancbmk_s 112 1010 14.10 1000 14.10 1010 14.00 112 1010 14.10 1000 14.10 1010 14.00
625.x264_s 112 76.0 23.20 75.9 23.20 76.1 23.20 112 72.4 24.40 72.5 24.30 72.5 24.30
631.deepsjeng_s 112 1910 7.49 1920 7.48 1920 7.48 112 1910 7.49 1920 7.48 1920 7.48
641.leela_s 112 2810 6.08 2810 6.08 2810 6.08 112 2810 6.08 2810 6.08 2810 6.08
648.exchange2_s 112 1090 26.90 1090 26.90 1100 26.80 112 1090 26.90 1090 26.90 1100 26.80
657.xz_s 112 1990 31.10 1990 31.10 1980 31.20 112 1990 31.10 1990 31.10 1980 31.20

Operating System Notes

 Stack size set to unlimited using "ulimit -s unlimited"
 OS set to performance mode via cpupower frequency-set -g performance

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
KMP_AFFINITY = "granularity=fine,scatter"
LD_LIBRARY_PATH = "/home/tzk/SPECcpu/lib/intel64:/home/tzk/SPECcpu/lib/ia32:/home/tzk/SPECcpu/je5.0.1-64"
MALLOC_CONF = "retain:true"
OMP_STACKSIZE = "192M"

General Notes

 Binaries compiled on a system with 2x Intel Xeon Platinum 8280M CPU + 384GB RAM
 memory using Red Hat Enterprise Linux 8.4
 NA : The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown)
   is mitigated in the system as tested and documented.
 Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1)
   is mitigated in the system as tested and documented.
 Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
   is mitigated in the system as tested and documented.
 Transparent Huge Pages enabled by default
 Prior to runcpu invocation
 Filesystem page cache synced and cleared with:
 sync; echo 3>       /proc/sys/vm/drop_caches
 jemalloc, a general purpose malloc implementation
 built with the RedHat Enterprise 7.5, and the system compiler gcc 4.8.5
 sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases

Platform Notes

 BIOS Configuration:
   SNC (Sub NUMA) set to Enable SNC2 (2-clusters)
   Patrol Scrub set to Disabled
   Hardware P-States set to Native Mode
   Enable LP [Global] set to Single LP

 Sysinfo program /home/tzk/SPECcpu/bin/sysinfo
 Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197
 running on localhost Wed Jun 12 02:39:43 2024

 SUT (System Under Test) info as seen by some common utilities.

 ------------------------------------------------------------
 Table of contents
 ------------------------------------------------------------
  1. uname -a
  2. w
  3. Username
  4. ulimit -a
  5. sysinfo process ancestry
  6. /proc/cpuinfo
  7. lscpu
  8. numactl --hardware
  9. /proc/meminfo
 10. who -r
 11. Systemd service manager version: systemd 249 (249.16+suse.171.gdad0071f15)
 12. Services, from systemctl list-unit-files
 13. Linux kernel boot-time arguments, from /proc/cmdline
 14. cpupower frequency-info
 15. tuned-adm active
 16. sysctl
 17. /sys/kernel/mm/transparent_hugepage
 18. /sys/kernel/mm/transparent_hugepage/khugepaged
 19. OS release
 20. Disk information
 21. /sys/devices/virtual/dmi/id
 22. dmidecode
 23. BIOS
 ------------------------------------------------------------

 ------------------------------------------------------------
 1. uname -a
   Linux localhost 5.14.21-150500.53-default #1 SMP PREEMPT_DYNAMIC Wed May 10 07:56:26 UTC 2023 (b630043)
   x86_64 x86_64 x86_64 GNU/Linux

 ------------------------------------------------------------
 2. w
    02:39:44 up 14:46,  2 users,  load average: 5.86, 5.31, 3.17
   USER     TTY      FROM             LOGIN@   IDLE   JCPU   PCPU WHAT
   root     tty1     -                Tue11    9:20m  0.92s  0.01s python3 SetPrefetch.py -t intspeed -f
   /home/tzk/SPECcpu/result/CPU2017.550.log
   root     pts/0    10.2.49.197      21:09    5:29m  0.03s  0.03s -bash

 ------------------------------------------------------------
 3. Username
   From environment variable $USER:  root

 ------------------------------------------------------------
 4. ulimit -a
   core file size          (blocks, -c) unlimited
   data seg size           (kbytes, -d) unlimited
   scheduling priority             (-e) 0
   file size               (blocks, -f) unlimited
   pending signals                 (-i) 4125124
   max locked memory       (kbytes, -l) 64
   max memory size         (kbytes, -m) unlimited
   open files                      (-n) 1024
   pipe size            (512 bytes, -p) 8
   POSIX message queues     (bytes, -q) 819200
   real-time priority              (-r) 0
   stack size              (kbytes, -s) unlimited
   cpu time               (seconds, -t) unlimited
   max user processes              (-u) 4125124
   virtual memory          (kbytes, -v) unlimited
   file locks                      (-x) unlimited

 ------------------------------------------------------------
 5. sysinfo process ancestry
  /usr/lib/systemd/systemd --switched-root --system --deserialize 30
  login -- root
  -bash
  -bash
  runcpu --nobuild --action validate --define default-platform-flags -c
    ic2023.2.3-lin-sapphirerapids-speed-20231121.cfg --define cores=112 --tune base,peak -o all --define
    intspeedaffinity --define drop_caches intspeed
  runcpu --nobuild --action validate --define default-platform-flags --configfile
    ic2023.2.3-lin-sapphirerapids-speed-20231121.cfg --define cores=112 --tune base,peak --output_format all
    --define intspeedaffinity --define drop_caches --nopower --runmode speed --tune base:peak --size refspeed
    intspeed --nopreenv --note-preenv --logfile $SPEC/tmp/CPU2017.550/templogs/preenv.intspeed.550.0.log
    --lognum 550.0 --from_runcpu 2
  specperl $SPEC/bin/sysinfo
 $SPEC = /home/tzk/SPECcpu

 ------------------------------------------------------------
 6. /proc/cpuinfo
     model name      : INTEL(R) XEON(R) PLATINUM 8570
     vendor_id       : GenuineIntel
     cpu family      : 6
     model           : 207
     stepping        : 2
     microcode       : 0x21000200
     bugs            : spectre_v1 spectre_v2 spec_store_bypass swapgs eibrs_pbrsb
     cpu cores       : 56
     siblings        : 56
     2 physical ids (chips)
     112 processors (hardware threads)
     physical id 0: core ids 0-55
     physical id 1: core ids 0-55
     physical id 0: apicids
     0,2,4,6,8,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,64,66,68,70,72
     ,74,76,78,80,82,84,86,88,90,92,94,96,98,100,102,104,106,108,110
     physical id 1: apicids
     128,130,132,134,136,138,140,142,144,146,148,150,152,154,156,158,160,162,164,166,168,170,172,174,176,178,1
     80,182,184,186,188,190,192,194,196,198,200,202,204,206,208,210,212,214,216,218,220,222,224,226,228,230,23
     2,234,236,238
   Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for
   virtualized systems.  Use the above data carefully.

 ------------------------------------------------------------
 7. lscpu

 From lscpu from util-linux 2.37.4:
   Architecture:                    x86_64
   CPU op-mode(s):                  32-bit, 64-bit
   Address sizes:                   52 bits physical, 57 bits virtual
   Byte Order:                      Little Endian
   CPU(s):                          112
   On-line CPU(s) list:             0-111
   Vendor ID:                       GenuineIntel
   Model name:                      INTEL(R) XEON(R) PLATINUM 8570
   CPU family:                      6
   Model:                           207
   Thread(s) per core:              1
   Core(s) per socket:              56
   Socket(s):                       2
   Stepping:                        2
   CPU max MHz:                     4000.0000
   CPU min MHz:                     800.0000
   BogoMIPS:                        4200.00
   Flags:                           fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36
                                    clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp
                                    lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology
                                    nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor
                                    ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1
                                    sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand
                                    lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 cat_l2 cdp_l3
                                    invpcid_single cdp_l2 ssbd mba ibrs ibpb stibp ibrs_enhanced tpr_shadow
                                    vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 hle avx2 smep
                                    bmi2 erms invpcid rtm cqm rdt_a avx512f avx512dq rdseed adx smap
                                    avx512ifma clflushopt clwb intel_pt avx512cd sha_ni avx512bw avx512vl
                                    xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total
                                    cqm_mbm_local avx_vnni avx512_bf16 wbnoinvd dtherm ida arat pln pts hwp
                                    hwp_act_window hwp_epp hwp_pkg_req avx512vbmi umip pku ospke waitpkg
                                    avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg tme
                                    avx512_vpopcntdq la57 rdpid bus_lock_detect cldemote movdiri movdir64b
                                    enqcmd fsrm md_clear serialize tsxldtrk pconfig arch_lbr avx512_fp16
                                    amx_tile flush_l1d arch_capabilities
   Virtualization:                  VT-x
   L1d cache:                       5.3 MiB (112 instances)
   L1i cache:                       3.5 MiB (112 instances)
   L2 cache:                        224 MiB (112 instances)
   L3 cache:                        600 MiB (2 instances)
   NUMA node(s):                    4
   NUMA node0 CPU(s):               0-27
   NUMA node1 CPU(s):               28-55
   NUMA node2 CPU(s):               56-83
   NUMA node3 CPU(s):               84-111
   Vulnerability Itlb multihit:     Not affected
   Vulnerability L1tf:              Not affected
   Vulnerability Mds:               Not affected
   Vulnerability Meltdown:          Not affected
   Vulnerability Mmio stale data:   Not affected
   Vulnerability Retbleed:          Not affected
   Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl and seccomp
   Vulnerability Spectre v1:        Mitigation; usercopy/swapgs barriers and __user pointer sanitization
   Vulnerability Spectre v2:        Mitigation; Enhanced IBRS, IBPB conditional, RSB filling, PBRSB-eIBRS SW
                                    sequence
   Vulnerability Srbds:             Not affected
   Vulnerability Tsx async abort:   Not affected

 From lscpu --cache:
      NAME ONE-SIZE ALL-SIZE WAYS TYPE        LEVEL   SETS PHY-LINE COHERENCY-SIZE
      L1d       48K     5.3M   12 Data            1     64        1             64
      L1i       32K     3.5M    8 Instruction     1     64        1             64
      L2         2M     224M   16 Unified         2   2048        1             64
      L3       300M     600M   20 Unified         3 245760        1             64

 ------------------------------------------------------------
 8. numactl --hardware
 NOTE: a numactl 'node' might or might not correspond to a physical chip.
   available: 4 nodes (0-3)
   node 0 cpus: 0-27
   node 0 size: 257562 MB
   node 0 free: 256100 MB
   node 1 cpus: 28-55
   node 1 size: 258040 MB
   node 1 free: 251233 MB
   node 2 cpus: 56-83
   node 2 size: 258006 MB
   node 2 free: 257316 MB
   node 3 cpus: 84-111
   node 3 size: 257702 MB
   node 3 free: 256468 MB
   node distances:
   node   0   1   2   3
     0:  10  12  21  21
     1:  12  10  21  21
     2:  21  21  10  12
     3:  21  21  12  10

 ------------------------------------------------------------
 9. /proc/meminfo
    MemTotal:       1056063644 kB

 ------------------------------------------------------------
 10. who -r
   run-level 3 Jun 11 11:53

 ------------------------------------------------------------
 11. Systemd service manager version: systemd 249 (249.16+suse.171.gdad0071f15)
   Default Target  Status
   multi-user      running

 ------------------------------------------------------------
 12. Services, from systemctl list-unit-files
   STATE            UNIT FILES
   enabled          YaST2-Firstboot YaST2-Second-Stage apparmor auditd chronyd cron cups firewalld getty@
                    haveged irqbalance issue-generator kbdsettings kdump kdump-early klog lm_sensors
                    lvm2-monitor nscd postfix purge-kernels rollback rsyslog smartd sshd systemd-pstore wicked
                    wickedd-auto4 wickedd-dhcp4 wickedd-dhcp6 wickedd-nanny
   enabled-runtime  systemd-remount-fs
   disabled         apcupsd autofs autoyast-initscripts blk-availability boot-sysctl ca-certificates
                    chrony-wait console-getty corosync corosync-notifyd crm_mon ctdb cups-browsed debug-shell
                    dlm dmraid-activation drbd drbd-lvchange@ drbd-wait-promotable@ ebtables
                    exchange-bmc-os-info fancontrol gpm grub2-once haveged-switch-root hawk ipmi ipmievd
                    ipvsadm issue-add-ssh-keys kexec-load ldirectord logd lunmask lvmlockd lvmlocks
                    man-db-create multipathd nfs nfs-blkmap pacemaker rpcbind rpmconfigcheck rsyncd sanlock
                    sbd sbd_remote serial-getty@ smartd_generate_opts snmpd snmptrapd svnserve
                    systemd-boot-check-no-failures systemd-network-generator systemd-sysext
                    systemd-time-wait-sync systemd-timesyncd tuned udisks2 wdmd
   indirect         wickedd

 ------------------------------------------------------------
 13. Linux kernel boot-time arguments, from /proc/cmdline
   BOOT_IMAGE=/boot/vmlinuz-5.14.21-150500.53-default
   root=UUID=aec0cd35-b79c-432e-8a92-68e81aa94bbb
   splash=silent
   resume=/dev/disk/by-uuid/d53caa22-ee5c-46fa-a8f2-44d678cc6069
   mitigations=auto
   quiet
   security=apparmor
   crashkernel=317M,high
   crashkernel=72M,low
   default_hugepagesz=1G

 ------------------------------------------------------------
 14. cpupower frequency-info
   analyzing CPU 0:
     current policy: frequency should be within 800 MHz and 4.00 GHz.
                     The governor "performance" may decide which speed to use
                     within this range.
     boost state support:
       Supported: yes
       Active: yes

 ------------------------------------------------------------
 15. tuned-adm active
   It seems that tuned daemon is not running, preset profile is not activated.
   Preset profile: throughput-performance

 ------------------------------------------------------------
 16. sysctl
   kernel.numa_balancing               1
   kernel.randomize_va_space           2
   vm.compaction_proactiveness        20
   vm.dirty_background_bytes           0
   vm.dirty_background_ratio          10
   vm.dirty_bytes                      0
   vm.dirty_expire_centisecs        5000
   vm.dirty_ratio                     30
   vm.dirty_writeback_centisecs      700
   vm.dirtytime_expire_seconds     43200
   vm.extfrag_threshold              500
   vm.min_unmapped_ratio               1
   vm.nr_hugepages                     0
   vm.nr_hugepages_mempolicy           0
   vm.nr_overcommit_hugepages          0
   vm.swappiness                      10
   vm.watermark_boost_factor       15000
   vm.watermark_scale_factor          10
   vm.zone_reclaim_mode                0

 ------------------------------------------------------------
 17. /sys/kernel/mm/transparent_hugepage
   defrag          always defer defer+madvise [madvise] never
   enabled         [always] madvise never
   hpage_pmd_size  2097152
   shmem_enabled   always within_size advise [never] deny force

 ------------------------------------------------------------
 18. /sys/kernel/mm/transparent_hugepage/khugepaged
   alloc_sleep_millisecs   60000
   defrag                      1
   max_ptes_none             511
   max_ptes_shared           256
   max_ptes_swap              64
   pages_to_scan            4096
   scan_sleep_millisecs    10000

 ------------------------------------------------------------
 19. OS release
   From /etc/*-release /etc/*-version
   os-release openSUSE Leap 15.5

 ------------------------------------------------------------
 20. Disk information
 SPEC is set to: /home/tzk/SPECcpu
   Filesystem     Type  Size  Used Avail Use% Mounted on
   /dev/sda3      xfs    12T  249G   12T   3% /home

 ------------------------------------------------------------
 21. /sys/devices/virtual/dmi/id
     Vendor:         Nettrix
     Product:        R620 G50
     Product Family: Rack
     Serial:         6101810603447812

 ------------------------------------------------------------
 22. dmidecode
   Additional information from dmidecode 3.4 follows.  WARNING: Use caution when you interpret this section.
   The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately
   determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the
   "DMTF SMBIOS" standard.
   Memory:
     16x Hynix HMCG94AGBRA179N 64 GB 2 rank 5600


 ------------------------------------------------------------
 23. BIOS
 (This section combines info from /sys/devices and dmidecode.)
    BIOS Vendor:       American Megatrends International, LLC.
    BIOS Version:      NNH1041268
    BIOS Date:         01/26/2024
    BIOS Revision:     5.32

Compiler Version Notes

============================================================================================================
C       | 600.perlbench_s(base, peak) 602.gcc_s(base, peak) 605.mcf_s(base, peak) 625.x264_s(base, peak)
        | 657.xz_s(base, peak)
------------------------------------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2023.2.3 Build x
Copyright (C) 1985-2023 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------------------------------------

============================================================================================================
C++     | 620.omnetpp_s(base, peak) 623.xalancbmk_s(base, peak) 631.deepsjeng_s(base, peak)
        | 641.leela_s(base, peak)
------------------------------------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2023.2.3 Build x
Copyright (C) 1985-2023 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------------------------------------

============================================================================================================
Fortran | 648.exchange2_s(base, peak)
------------------------------------------------------------------------------------------------------------
Intel(R) Fortran Compiler for applications running on Intel(R) 64, Version 2023.2.3 Build x
Copyright (C) 1985-2023 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 icx 

C++ benchmarks:

 icpx 

Fortran benchmarks:

 ifx 

Base Portability Flags

600.perlbench_s:  -DSPEC_LP64   -DSPEC_LINUX_X64 
602.gcc_s:  -DSPEC_LP64 
605.mcf_s:  -DSPEC_LP64 
620.omnetpp_s:  -DSPEC_LP64 
623.xalancbmk_s:  -DSPEC_LP64   -DSPEC_LINUX 
625.x264_s:  -DSPEC_LP64 
631.deepsjeng_s:  -DSPEC_LP64 
641.leela_s:  -DSPEC_LP64 
648.exchange2_s:  -DSPEC_LP64 
657.xz_s:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -w   -std=c11   -m64   -Wl,-z,muldefs   -xsapphirerapids   -O3   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -fiopenmp   -DSPEC_OPENMP   -L/usr/local/jemalloc64-5.0.1/lib   -ljemalloc 

C++ benchmarks:

 -w   -std=c++14   -m64   -Wl,-z,muldefs   -xsapphirerapids   -O3   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -L/usr/local/jemalloc64-5.0.1/lib   -ljemalloc 

Fortran benchmarks:

 -w   -m64   -Wl,-z,muldefs   -xsapphirerapids   -O3   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -L/usr/local/jemalloc64-5.0.1/lib   -ljemalloc 

Peak Compiler Invocation

C benchmarks:

 icx 

C++ benchmarks:

 icpx 

Fortran benchmarks:

 ifx 

Peak Portability Flags

Same as Base Portability Flags

Peak Optimization Flags

C benchmarks:

600.perlbench_s:  -w   -m64   -std=c11   -Wl,-z,muldefs   -fprofile-generate(pass 1)   -fprofile-use=default.profdata(pass 2)   -xCORE-AVX2(pass 1)   -flto   -Ofast(pass 1)   -xCORE-AVX512   -O3   -ffast-math   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -fiopenmp   -DSPEC_OPENMP   -fno-strict-overflow   -L/usr/local/jemalloc64-5.0.1/lib   -ljemalloc 
602.gcc_s:  -w   -m64   -std=c11   -Wl,-z,muldefs   -fprofile-generate(pass 1)   -fprofile-use=default.profdata(pass 2)   -xCORE-AVX2(pass 1)   -flto   -Ofast(pass 1)   -xCORE-AVX512   -O3   -ffast-math   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -fiopenmp   -DSPEC_OPENMP   -L/usr/local/jemalloc64-5.0.1/lib   -ljemalloc 
605.mcf_s:  basepeak = yes 
625.x264_s:  -w   -std=c11   -m64   -Wl,-z,muldefs   -xsapphirerapids   -O3   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -fiopenmp   -DSPEC_OPENMP   -fno-alias   -L/usr/local/jemalloc64-5.0.1/lib   -ljemalloc 
657.xz_s:  basepeak = yes 

C++ benchmarks:

620.omnetpp_s:  basepeak = yes 
623.xalancbmk_s:  basepeak = yes 
631.deepsjeng_s:  basepeak = yes 
641.leela_s:  basepeak = yes 

Fortran benchmarks:

648.exchange2_s:  basepeak = yes 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/Intel-ic2023p2-official-linux64.html,
http://www.spec.org/cpu2017/flags/Nettrix-Platform-Settings-V1.3-SPR-revA.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/Intel-ic2023p2-official-linux64.xml,
http://www.spec.org/cpu2017/flags/Nettrix-Platform-Settings-V1.3-SPR-revA.xml.