# Invocation command line: # /home/cpu2017-1.1.9-amd-aocc400-znver4-A1.2/bin/harness/runcpu --configfile amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 --nopower --runmode speed --tune base:peak --size test:train:refspeed fpspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 400 SPEC CPU 2017 V1.1.9 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc400_znver4_A1.cfg # Creation Date : April 16, 2023 # CPU 2017 Version : 1.1.9 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC 4.0.0 # Operating system version : RHEL 8.6 # Supported OS's : Ubuntu 22.04, RHEL 8.6/9, SLE 15 SP4 # Hardware : AMD znver4 (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 64-bit # Auto Parallelization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc400_znver4_A1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU 2017 under optimized conditions on AMD znver4-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD znver4 microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc400_znver4_A1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on one socket AMD # znver4-based servers with 96 cores, SMT enabled and 768 (64x12) GB of DDR5 # memory distributed evenly among all 12 channels using 64 GiB DIMMs. # # To run the binary package on other znver4 configurations, please review # "Readme.amd_speed_aocc400_znver4_A1.txt". In general, znver4 CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc400_znver4_A1.cfg" or any # other file besides "ini_amd_speed_aocc400_znver4_A1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 22.04, RHEL 8.6/9, and SLE 15 SP4. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ### add power options power_analyzer = WIN:9888 temp_meter = WIN:9889 ################################################################################ # Modifiable macros: ################################################################################ # "allow_build"" switch: # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc400 %define binary_package_name amd_speed_%{compiler_name}_znver4_A %define binary_package_ext %{binary_package_name} %define binary_package_revision 1 %define build_path ${SPEC} %define flags_file_name %{compiler_name}-flags-A1.2.xml # Do NOT change build_lib_dir after the build or it will trigger a # rebuild of the xalanc. It should also remain literal: %define build_lib_dir amd_speed_aocc400_znver4_A_lib # To enable the platform file, be sure to uncomment the flagsurl02 header line # below in the Header settings. %define platform_file_name INVALID_platform_%{binary_package_name}.xml ################################################################################ # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc %define flags_inc_file_name %{binary_package_full_name}_flags.inc # Binary label extension: # Only modify the binary label extension if you plan to rebuild the binaries. # If you plan to recompile these CPU 2017 binaries, please choose a new extension # name below to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true above. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Note that AMD calls an external script to set up the compiler and library # paths before initiating the build. %define ext %{binary_package_ext} ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # retain:true is necessary to avoid gcc out-of-memory exceptions on certain SUTs: # oversize_threshold is required to support jemalloc 5.2.x+ preENV_MALLOC_CONF = oversize_threshold:0,retain:true preENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 0 # OpenMP environment variables: preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false preENV_OMP_STACKSIZE = 128M # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib:%{ENV_LD_LIBRARY_PATH} %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_znver4_A1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc400_znver4_A1.inc # File generation code date: October 11, 2022 # File generation date/time: October 11, 2023 / 09:09:04 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 48 %define physical_core_count 24 %define physical_core_max 23 %define logical_core_max 47 ################################################################################ ################################################################################ # The following inc blocks set the speed thread counts and affinity settings. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # # Selected thread counts from 'siena24' section of CPU info ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 48 preENV_GOMP_CPU_AFFINITY = 0-47 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 24 ENV_GOMP_CPU_AFFINITY = 0-23 bind0 = numactl --physcpubind=0-23 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 24 ENV_GOMP_CPU_AFFINITY = 0-23 bind0 = numactl --physcpubind=0-23 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 15 bind0 = numactl --physcpubind=15 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 24 603.bwaves_s,619.lbm_s,621.wrf_s,628.pop2_s,649.fotonik3d_s=peak: threads = 24 ENV_GOMP_CPU_AFFINITY = 0-23 bind0 = numactl --physcpubind=0-23 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 48 607.cactuBSSN_s,627.cam4_s,638.imagick_s,644.nab_s,657.xz_s=peak: threads = 48 ENV_GOMP_CPU_AFFINITY = 0-47 bind0 = numactl --physcpubind=0-47 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 48 654.roms_s=peak: threads = 48 ENV_GOMP_CPU_AFFINITY = 0 24 1 25 2 26 3 27 4 28 5 29 6 30 7 31 8 32 9 33 10 34 11 35 12 36 13 37 14 38 15 39 16 40 17 41 18 42 19 43 20 44 21 45 22 46 23 47 bind0 = numactl --physcpubind=0-47 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =9017 tester =Lenovo Global Technology test_sponsor =Lenovo Global Technology hw_vendor =Lenovo Global Technology hw_model000 =ThinkEdge SE455 V3 hw_model001 =(2.55 GHz,AMD EPYC 8224P) #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 4.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Nov-2023 sw_avail =Nov-2022 hw_cpu_name =AMD EPYC SIENA24 hw_cpu_nominal_mhz =2550 hw_cpu_max_mhz =3000 hw_ncores =24 hw_nthreadspercore =2 hw_ncpuorder =1 chip hw_other =None # Other perf-relevant hw, or "None" fw_bios =Lenovo BIOS Version MBE103I 1.10 released Sep-2023 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =1 MB I+D on chip per core hw_tcache000 =64 MB I+D on chip per chip, hw_tcache001 = 16 MB shared / 6 cores hw_ocache =None sw_other =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 9174F CPU + 1.5TiB Memory using RHEL 8.6 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 = notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_035 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_040 =To free node-local memory and avoid remote memory usage, notes_os_045 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_050 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_055 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_060 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. notes_os_065 = notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = # notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) # notes_jemalloc_005 =jemalloc 5.1.0 is available here: # notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 # notes_jemalloc_015 = # sw_other000 =jemalloc: jemalloc memory allocator library v5.1.0 ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (edit and uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = TDP: 400 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = PPT: 400 # notes_plat_010 = NPS: 4 # notes_plat_011 = Workload Profile = CPU Intensive # notes_plat_012 = TSME = Disabled # notes_plat_014 = SEV Control = Disabled # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intspeed: sw_peak_ptrsize =64-bit notes_os_thp_003 = ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fpspeed: sw_peak_ptrsize =64-bit notes_os_thp_015 =To always enable THP for peak runs of: notes_os_thp_020 =603.bwaves_s, 607.cactuBSSN_s, 619.lbm_s, 627.cam4_s, 628.pop2_s, 638.imagick_s, 644.nab_s, 649.fotonik3d_s: notes_os_thp_025 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_030 =run as root. notes_os_thp_035 =To disable THP for peak runs of 621.wrf_s: notes_os_thp_040 ='echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_045 =run as root. notes_os_thp_050 =To enable THP only on request for peak runs of 654.roms_s: notes_os_thp_055 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_060 =run as root. ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =1 x 480 GB M.2 NVME SSD hw_memory =192 GB (6 x 32 GB 2Rx8 PC5-4800B-R) hw_nchips =1 prepared_by =Lenovo Global Technology sw_file =xfs sw_os000 =SUSE Linux Enterprise Server 15 SP4 sw_os001 =Kernel 5.14.21-150400.22-default sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/home/cpu2017-1.1.9-amd-aocc400-znver4-A1.2/config/amd_speed_aocc400_znver4_A1.inc' # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib:%{ENV_LIBRARY_PATH} % define build_ncpus 16 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/Lenovo-Platform-SPECcpu2017-Flags-V1.2-Genoa-T.xml flagsurl001 = http://www.spec.org/cpu2017/flags/aocc400-flags.2023-09-13.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ # Include the flags file: ################################################################################ #include: %{flags_inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_znver4_A1_flags.inc' ############################################################################ ################################################################################ # AMD AOCC 4.0.0 SPEC CPU2017 V1.1.8 Speed Configuration Flags for AMD64 Linux ################################################################################ # Compilers ################################################################################ default: CC = clang -m64 CXX = clang++ -m64 FC = flang -m64 CLD = clang -m64 CXXLD = clang++ -m64 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default: # data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # Default libraries and variables ################################################################################ default: # Libraries: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdalloc \ -lamdlibm \ -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM # Variables: OPT_ROOT = -march=znver4 \ $(VECMATHLIB) \ -ffast-math \ -fopenmp OPT_ROOT_BASE = -O3 \ $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast \ $(OPT_ROOT) \ -flto THP_ALWAYS = echo always > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag THP_NEVER = echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo never > /sys/kernel/mm/transparent_hugepage/defrag THP_MADVISE = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag DEFAULT_SUBMIT = echo "$command" > run.sh ; $BIND bash run.sh ############################################################################### # AOCC 4.0.0 workarounds that do not count as PORTABILITY ################################################################################ # The workarounds in this section would not qualify under the SPEC CPU # PORTABILITY rule. # - In peak, they can be set as needed for individual benchmarks. # - In base, individual settings are not allowed; set for whole suite. # Use EXTRA_CFLAGS, EXTRA_CXXFLAGS, and EXTRA_FFLAGS for them. # # See: # https://www.spec.org/cpu2017/Docs/runrules.html#portability # https://www.spec.org/cpu2017/Docs/runrules.html#BaseFlags ####################### # Default workarounds # ####################### default: # Allow unused compile/link arguments without triggering warnings during build: EXTRA_CFLAGS = -Wno-unused-command-line-argument EXTRA_CXXFLAGS = -Wno-unused-command-line-argument EXTRA_FFLAGS = -Wno-unused-command-line-argument LDOPTIONS = -Wno-unused-command-line-argument #################### # Base workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - base # ############################## intrate=base: # The following is necessary for 602 gcc: EXTRA_LDFLAGS = -z muldefs ######################### # FP workarounds - base # ######################### # # *** NONE *** # #################### # Peak workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - peak # ############################## 602.gcc_s=peak: #lang='C' EXTRA_LDFLAGS = -z muldefs ##################################### # Floating Point workarounds - peak # ##################################### # # *** NONE *** # ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -fstruct-layout=7 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 \ -fremap-arrays \ -fstrip-mining \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -unroll-threshold=100 \ -finline-aggressive \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching #other libraries # Put OpenMP and math libraries here: # -lm needed at the end for some transcendental functions: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = ######################### # intspeed tuning flags # ######################### intspeed: FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -optimize-strided-mem-cost EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 EXTRA_CXXFLAGS = -fvirtual-function-elimination \ -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition LDCXXFLAGS = LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split ############################## # intspeed base tuning flags # ############################## intspeed=base: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lflang \ -lm EXTRA_CLIBS = -lamdalloc EXTRA_CXXLIBS = -lamdalloc-ext EXTRA_FLIBS = -lamdalloc submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################## # intspeed peak tuning flags # ############################## intspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed base tuning flags # ############################# fpspeed=base: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed peak tuning flags # ############################# fpspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=9 \ -mllvm -unroll-threshold=50 \ -fremap-arrays \ -fstrip-mining \ -mllvm -inline-threshold=1000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_PEAK) -finline-aggressive \ -mllvm -unroll-threshold=100 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw # Benchmark specific peak tuning flags: 603.bwaves_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 607.cactuBSSN_s=peak: #lang='CXX,C,F' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 619.lbm_s=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 620.omnetpp_s=peak: #lang='CXX' EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang -lm 621.wrf_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT_BASE) \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt submit = ${THP_NEVER}; ${DEFAULT_SUBMIT} 623.xalancbmk_s=peak: #lang='CXX' EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 \ -Wl,-mllvm -Wl,-do-block-reorder=aggressive EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang \ -lm 627.cam4_s=peak: #lang='F,C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 628.pop2_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT) \ -Ofast \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 638.imagick_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 644.nab_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-region-vectorize submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 649.fotonik3d_s=peak: #lang='F' ENV_PGHPF_ZMEM = yes submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 654.roms_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_MADVISE}; ${DEFAULT_SUBMIT} 657.xz_s=peak: #lang='C' ENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 8 # ---- End inclusion of '/home/cpu2017-1.1.9-amd-aocc400-znver4-A1.2/config/amd_speed_aocc400_znver4_A1_flags.inc' # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:2eb381fc1a58eb8122e4a1b875c1e38b3489dac84088192aa0ec6d157b084d06) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /home/cpu2017-1.1.9-amd-aocc400-znver4-A1.2/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197 notes_plat_sysinfo_015 = running on localhost Wed Oct 11 09:09:13 2023 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = notes_plat_sysinfo_035 = ------------------------------------------------------------ notes_plat_sysinfo_040 = Table of contents notes_plat_sysinfo_045 = ------------------------------------------------------------ notes_plat_sysinfo_050 = 1. uname -a notes_plat_sysinfo_055 = 2. w notes_plat_sysinfo_060 = 3. Username notes_plat_sysinfo_065 = 4. ulimit -a notes_plat_sysinfo_070 = 5. sysinfo process ancestry notes_plat_sysinfo_075 = 6. /proc/cpuinfo notes_plat_sysinfo_080 = 7. lscpu notes_plat_sysinfo_085 = 8. numactl --hardware notes_plat_sysinfo_090 = 9. /proc/meminfo notes_plat_sysinfo_095 = 10. who -r notes_plat_sysinfo_100 = 11. Systemd service manager version: systemd 249 (249.11+suse.124.g2bc0b2c447) notes_plat_sysinfo_105 = 12. Services, from systemctl list-unit-files notes_plat_sysinfo_110 = 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_115 = 14. cpupower frequency-info notes_plat_sysinfo_120 = 15. sysctl notes_plat_sysinfo_125 = 16. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_130 = 17. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_135 = 18. OS release notes_plat_sysinfo_140 = 19. Disk information notes_plat_sysinfo_145 = 20. /sys/devices/virtual/dmi/id notes_plat_sysinfo_150 = 21. dmidecode notes_plat_sysinfo_155 = 22. BIOS notes_plat_sysinfo_160 = ------------------------------------------------------------ notes_plat_sysinfo_165 = notes_plat_sysinfo_170 = ------------------------------------------------------------ notes_plat_sysinfo_175 = 1. uname -a notes_plat_sysinfo_180 = Linux localhost 5.14.21-150400.22-default #1 SMP PREEMPT_DYNAMIC Wed May 11 06:57:18 UTC 2022 (49db222) notes_plat_sysinfo_185 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = ------------------------------------------------------------ notes_plat_sysinfo_200 = 2. w notes_plat_sysinfo_205 = 09:09:13 up 1 day, 15:51, 1 user, load average: 0.07, 0.02, 0.00 notes_plat_sysinfo_210 = USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT notes_plat_sysinfo_215 = root tty1 - Mon17 16.00s 1.52s 0.07s /bin/bash ./amd_speed_aocc400_znver4_A1.sh notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = ------------------------------------------------------------ notes_plat_sysinfo_230 = 3. Username notes_plat_sysinfo_235 = From environment variable $USER: root notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = ------------------------------------------------------------ notes_plat_sysinfo_250 = 4. ulimit -a notes_plat_sysinfo_255 = core file size (blocks, -c) unlimited notes_plat_sysinfo_260 = data seg size (kbytes, -d) unlimited notes_plat_sysinfo_265 = scheduling priority (-e) 0 notes_plat_sysinfo_270 = file size (blocks, -f) unlimited notes_plat_sysinfo_275 = pending signals (-i) 771834 notes_plat_sysinfo_280 = max locked memory (kbytes, -l) 2097152 notes_plat_sysinfo_285 = max memory size (kbytes, -m) unlimited notes_plat_sysinfo_290 = open files (-n) 1024 notes_plat_sysinfo_295 = pipe size (512 bytes, -p) 8 notes_plat_sysinfo_300 = POSIX message queues (bytes, -q) 819200 notes_plat_sysinfo_305 = real-time priority (-r) 0 notes_plat_sysinfo_310 = stack size (kbytes, -s) unlimited notes_plat_sysinfo_315 = cpu time (seconds, -t) unlimited notes_plat_sysinfo_320 = max user processes (-u) 771834 notes_plat_sysinfo_325 = virtual memory (kbytes, -v) unlimited notes_plat_sysinfo_330 = file locks (-x) unlimited notes_plat_sysinfo_335 = notes_plat_sysinfo_340 = ------------------------------------------------------------ notes_plat_sysinfo_345 = 5. sysinfo process ancestry notes_plat_sysinfo_350 = /usr/lib/systemd/systemd --switched-root --system --deserialize 30 notes_plat_sysinfo_355 = login -- root notes_plat_sysinfo_360 = -bash notes_plat_sysinfo_365 = /bin/bash ./Run036-compliant-amd-speedfp.sh notes_plat_sysinfo_370 = python3 ./run_amd_speed_aocc400_znver4_A1.py notes_plat_sysinfo_375 = /bin/bash ./amd_speed_aocc400_znver4_A1.sh notes_plat_sysinfo_380 = runcpu --config amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 fpspeed notes_plat_sysinfo_385 = runcpu --configfile amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 --nopower notes_plat_sysinfo_390 = --runmode speed --tune base:peak --size test:train:refspeed fpspeed --nopreenv --note-preenv --logfile notes_plat_sysinfo_395 = $SPEC/tmp/CPU2017.038/templogs/preenv.fpspeed.038.0.log --lognum 038.0 --from_runcpu 2 notes_plat_sysinfo_400 = specperl $SPEC/bin/sysinfo notes_plat_sysinfo_405 = $SPEC = /home/cpu2017-1.1.9-amd-aocc400-znver4-A1.2 notes_plat_sysinfo_410 = notes_plat_sysinfo_415 = ------------------------------------------------------------ notes_plat_sysinfo_420 = 6. /proc/cpuinfo notes_plat_sysinfo_425 = model name : AMD EPYC 8224P 24-Core Processor notes_plat_sysinfo_430 = vendor_id : AuthenticAMD notes_plat_sysinfo_435 = cpu family : 25 notes_plat_sysinfo_440 = model : 160 notes_plat_sysinfo_445 = stepping : 2 notes_plat_sysinfo_450 = microcode : 0xaa00212 notes_plat_sysinfo_455 = bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass notes_plat_sysinfo_460 = TLB size : 3584 4K pages notes_plat_sysinfo_465 = cpu cores : 24 notes_plat_sysinfo_470 = siblings : 48 notes_plat_sysinfo_475 = 1 physical ids (chips) notes_plat_sysinfo_480 = 48 processors (hardware threads) notes_plat_sysinfo_485 = physical id 0: core ids 0-5,8-13,16-21,24-29 notes_plat_sysinfo_490 = physical id 0: apicids 0-11,16-27,32-43,48-59 notes_plat_sysinfo_495 = Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for notes_plat_sysinfo_500 = virtualized systems. Use the above data carefully. notes_plat_sysinfo_505 = notes_plat_sysinfo_510 = ------------------------------------------------------------ notes_plat_sysinfo_515 = 7. lscpu notes_plat_sysinfo_520 = notes_plat_sysinfo_525 = From lscpu from util-linux 2.37.2: notes_plat_sysinfo_530 = Architecture: x86_64 notes_plat_sysinfo_535 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_540 = Address sizes: 52 bits physical, 57 bits virtual notes_plat_sysinfo_545 = Byte Order: Little Endian notes_plat_sysinfo_550 = CPU(s): 48 notes_plat_sysinfo_555 = On-line CPU(s) list: 0-47 notes_plat_sysinfo_560 = Vendor ID: AuthenticAMD notes_plat_sysinfo_565 = Model name: AMD EPYC 8224P 24-Core Processor notes_plat_sysinfo_570 = CPU family: 25 notes_plat_sysinfo_575 = Model: 160 notes_plat_sysinfo_580 = Thread(s) per core: 2 notes_plat_sysinfo_585 = Core(s) per socket: 24 notes_plat_sysinfo_590 = Socket(s): 1 notes_plat_sysinfo_595 = Stepping: 2 notes_plat_sysinfo_600 = Frequency boost: enabled notes_plat_sysinfo_605 = CPU max MHz: 3008.2029 notes_plat_sysinfo_610 = CPU min MHz: 1500.0000 notes_plat_sysinfo_615 = BogoMIPS: 5092.57 notes_plat_sysinfo_620 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 notes_plat_sysinfo_625 = clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm notes_plat_sysinfo_630 = constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl notes_plat_sysinfo_635 = pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe notes_plat_sysinfo_640 = popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy notes_plat_sysinfo_645 = abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext notes_plat_sysinfo_650 = perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 notes_plat_sysinfo_655 = invpcid_single hw_pstate ssbd mba ibrs ibpb stibp vmmcall fsgsbase bmi1 notes_plat_sysinfo_660 = avx2 smep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap notes_plat_sysinfo_665 = avx512ifma clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt notes_plat_sysinfo_670 = xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local notes_plat_sysinfo_675 = avx512_bf16 clzero irperf xsaveerptr rdpru wbnoinvd amd_ppin arat npt lbrv notes_plat_sysinfo_680 = svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists notes_plat_sysinfo_685 = pausefilter pfthreshold avic v_vmsave_vmload vgif v_spec_ctrl avx512vbmi notes_plat_sysinfo_690 = umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg notes_plat_sysinfo_695 = avx512_vpopcntdq la57 rdpid overflow_recov succor smca fsrm flush_l1d notes_plat_sysinfo_700 = Virtualization: AMD-V notes_plat_sysinfo_705 = L1d cache: 768 KiB (24 instances) notes_plat_sysinfo_710 = L1i cache: 768 KiB (24 instances) notes_plat_sysinfo_715 = L2 cache: 24 MiB (24 instances) notes_plat_sysinfo_720 = L3 cache: 64 MiB (4 instances) notes_plat_sysinfo_725 = NUMA node(s): 1 notes_plat_sysinfo_730 = NUMA node0 CPU(s): 0-47 notes_plat_sysinfo_735 = Vulnerability Itlb multihit: Not affected notes_plat_sysinfo_740 = Vulnerability L1tf: Not affected notes_plat_sysinfo_745 = Vulnerability Mds: Not affected notes_plat_sysinfo_750 = Vulnerability Meltdown: Not affected notes_plat_sysinfo_755 = Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl and seccomp notes_plat_sysinfo_760 = Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization notes_plat_sysinfo_765 = Vulnerability Spectre v2: Mitigation; Retpolines, IBPB conditional, IBRS_FW, STIBP always-on, RSB notes_plat_sysinfo_770 = filling notes_plat_sysinfo_775 = Vulnerability Srbds: Not affected notes_plat_sysinfo_780 = Vulnerability Tsx async abort: Not affected notes_plat_sysinfo_785 = notes_plat_sysinfo_790 = From lscpu --cache: notes_plat_sysinfo_795 = NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE notes_plat_sysinfo_800 = L1d 32K 768K 8 Data 1 64 1 64 notes_plat_sysinfo_805 = L1i 32K 768K 8 Instruction 1 64 1 64 notes_plat_sysinfo_810 = L2 1M 24M 8 Unified 2 2048 1 64 notes_plat_sysinfo_815 = L3 16M 64M 16 Unified 3 16384 1 64 notes_plat_sysinfo_820 = notes_plat_sysinfo_825 = ------------------------------------------------------------ notes_plat_sysinfo_830 = 8. numactl --hardware notes_plat_sysinfo_835 = NOTE: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_840 = available: 1 nodes (0) notes_plat_sysinfo_845 = node 0 cpus: 0-47 notes_plat_sysinfo_850 = node 0 size: 192982 MB notes_plat_sysinfo_855 = node 0 free: 192051 MB notes_plat_sysinfo_860 = node distances: notes_plat_sysinfo_865 = node 0 notes_plat_sysinfo_870 = 0: 10 notes_plat_sysinfo_875 = notes_plat_sysinfo_880 = ------------------------------------------------------------ notes_plat_sysinfo_885 = 9. /proc/meminfo notes_plat_sysinfo_890 = MemTotal: 197614172 kB notes_plat_sysinfo_895 = notes_plat_sysinfo_900 = ------------------------------------------------------------ notes_plat_sysinfo_905 = 10. who -r notes_plat_sysinfo_910 = run-level 3 Oct 9 17:18 notes_plat_sysinfo_915 = notes_plat_sysinfo_920 = ------------------------------------------------------------ notes_plat_sysinfo_925 = 11. Systemd service manager version: systemd 249 (249.11+suse.124.g2bc0b2c447) notes_plat_sysinfo_930 = Default Target Status notes_plat_sysinfo_935 = multi-user running notes_plat_sysinfo_940 = notes_plat_sysinfo_945 = ------------------------------------------------------------ notes_plat_sysinfo_950 = 12. Services, from systemctl list-unit-files notes_plat_sysinfo_955 = STATE UNIT FILES notes_plat_sysinfo_960 = enabled YaST2-Firstboot YaST2-Second-Stage apparmor auditd cron getty@ haveged irqbalance notes_plat_sysinfo_965 = issue-generator kbdsettings klog lvm2-monitor nscd nvmefc-boot-connections postfix notes_plat_sysinfo_970 = purge-kernels rollback rsyslog smartd sshd wicked wickedd-auto4 wickedd-dhcp4 notes_plat_sysinfo_975 = wickedd-dhcp6 wickedd-nanny notes_plat_sysinfo_980 = enabled-runtime systemd-remount-fs notes_plat_sysinfo_985 = disabled autofs autoyast-initscripts blk-availability boot-sysctl ca-certificates chrony-wait notes_plat_sysinfo_990 = chronyd console-getty cups cups-browsed debug-shell ebtables exchange-bmc-os-info notes_plat_sysinfo_995 = firewalld gpm grub2-once haveged-switch-root hwloc-dump-hwdata ipmi ipmievd notes_plat_sysinfo_1000= issue-add-ssh-keys kexec-load lunmask man-db-create multipathd nfs nfs-blkmap notes_plat_sysinfo_1005= nvmf-autoconnect rdisc rpcbind rpmconfigcheck rsyncd serial-getty@ smartd_generate_opts notes_plat_sysinfo_1010= snmpd snmptrapd systemd-boot-check-no-failures systemd-network-generator systemd-sysext notes_plat_sysinfo_1015= systemd-time-wait-sync systemd-timesyncd notes_plat_sysinfo_1020= generated ntp_sync notes_plat_sysinfo_1025= indirect wickedd notes_plat_sysinfo_1030= notes_plat_sysinfo_1035= ------------------------------------------------------------ notes_plat_sysinfo_1040= 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_1045= BOOT_IMAGE=/boot/vmlinuz-5.14.21-150400.22-default notes_plat_sysinfo_1050= root=UUID=16cfcc2a-78c0-4035-9fc3-1137fe6f296c notes_plat_sysinfo_1055= splash=silent notes_plat_sysinfo_1060= mitigations=auto notes_plat_sysinfo_1065= quiet notes_plat_sysinfo_1070= security=apparmor notes_plat_sysinfo_1075= notes_plat_sysinfo_1080= ------------------------------------------------------------ notes_plat_sysinfo_1085= 14. cpupower frequency-info notes_plat_sysinfo_1090= analyzing CPU 0: notes_plat_sysinfo_1095= current policy: frequency should be within 1.50 GHz and 2.55 GHz. notes_plat_sysinfo_1100= The governor "performance" may decide which speed to use notes_plat_sysinfo_1105= within this range. notes_plat_sysinfo_1110= boost state support: notes_plat_sysinfo_1115= Supported: yes notes_plat_sysinfo_1120= Active: yes notes_plat_sysinfo_1125= notes_plat_sysinfo_1130= ------------------------------------------------------------ notes_plat_sysinfo_1135= 15. sysctl notes_plat_sysinfo_1140= kernel.numa_balancing 0 notes_plat_sysinfo_1145= kernel.randomize_va_space 0 notes_plat_sysinfo_1150= vm.compaction_proactiveness 20 notes_plat_sysinfo_1155= vm.dirty_background_bytes 0 notes_plat_sysinfo_1160= vm.dirty_background_ratio 10 notes_plat_sysinfo_1165= vm.dirty_bytes 0 notes_plat_sysinfo_1170= vm.dirty_expire_centisecs 3000 notes_plat_sysinfo_1175= vm.dirty_ratio 8 notes_plat_sysinfo_1180= vm.dirty_writeback_centisecs 500 notes_plat_sysinfo_1185= vm.dirtytime_expire_seconds 43200 notes_plat_sysinfo_1190= vm.extfrag_threshold 500 notes_plat_sysinfo_1195= vm.min_unmapped_ratio 1 notes_plat_sysinfo_1200= vm.nr_hugepages 0 notes_plat_sysinfo_1205= vm.nr_hugepages_mempolicy 0 notes_plat_sysinfo_1210= vm.nr_overcommit_hugepages 0 notes_plat_sysinfo_1215= vm.swappiness 1 notes_plat_sysinfo_1220= vm.watermark_boost_factor 15000 notes_plat_sysinfo_1225= vm.watermark_scale_factor 10 notes_plat_sysinfo_1230= vm.zone_reclaim_mode 1 notes_plat_sysinfo_1235= notes_plat_sysinfo_1240= ------------------------------------------------------------ notes_plat_sysinfo_1245= 16. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_1250= defrag [always] defer defer+madvise madvise never notes_plat_sysinfo_1255= enabled [always] madvise never notes_plat_sysinfo_1260= hpage_pmd_size 2097152 notes_plat_sysinfo_1265= shmem_enabled always within_size advise [never] deny force notes_plat_sysinfo_1270= notes_plat_sysinfo_1275= ------------------------------------------------------------ notes_plat_sysinfo_1280= 17. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_1285= alloc_sleep_millisecs 60000 notes_plat_sysinfo_1290= defrag 1 notes_plat_sysinfo_1295= max_ptes_none 511 notes_plat_sysinfo_1300= max_ptes_shared 256 notes_plat_sysinfo_1305= max_ptes_swap 64 notes_plat_sysinfo_1310= pages_to_scan 4096 notes_plat_sysinfo_1315= scan_sleep_millisecs 10000 notes_plat_sysinfo_1320= notes_plat_sysinfo_1325= ------------------------------------------------------------ notes_plat_sysinfo_1330= 18. OS release notes_plat_sysinfo_1335= From /etc/*-release /etc/*-version notes_plat_sysinfo_1340= os-release SUSE Linux Enterprise Server 15 SP4 notes_plat_sysinfo_1345= notes_plat_sysinfo_1350= ------------------------------------------------------------ notes_plat_sysinfo_1355= 19. Disk information notes_plat_sysinfo_1360= SPEC is set to: /home/cpu2017-1.1.9-amd-aocc400-znver4-A1.2 notes_plat_sysinfo_1365= Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_1370= /dev/nvme0n1p2 xfs 447G 42G 405G 10% / notes_plat_sysinfo_1375= notes_plat_sysinfo_1380= ------------------------------------------------------------ notes_plat_sysinfo_1385= 20. /sys/devices/virtual/dmi/id notes_plat_sysinfo_1390= Vendor: Lenovo notes_plat_sysinfo_1395= Product: ThinkEdge SE455 V3 Planar notes_plat_sysinfo_1400= Product Family: ThinkSystem notes_plat_sysinfo_1405= Serial: 1234567890 notes_plat_sysinfo_1410= notes_plat_sysinfo_1415= ------------------------------------------------------------ notes_plat_sysinfo_1420= 21. dmidecode notes_plat_sysinfo_1425= Additional information from dmidecode 3.2 follows. WARNING: Use caution when you interpret this section. notes_plat_sysinfo_1430= The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_1435= determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the notes_plat_sysinfo_1440= "DMTF SMBIOS" standard. notes_plat_sysinfo_1445= Memory: notes_plat_sysinfo_1450= 3x SK Hynix HMCG88AEBRA115N 32 GB 2 rank 4800 notes_plat_sysinfo_1455= 3x SK Hynix HMCG88AEBRA173N 32 GB 2 rank 4800 notes_plat_sysinfo_1460= notes_plat_sysinfo_1465= notes_plat_sysinfo_1470= ------------------------------------------------------------ notes_plat_sysinfo_1475= 22. BIOS notes_plat_sysinfo_1480= (This section combines info from /sys/devices and dmidecode.) notes_plat_sysinfo_1485= BIOS Vendor: Lenovo notes_plat_sysinfo_1490= BIOS Version: MBE103I-1.10 notes_plat_sysinfo_1495= BIOS Date: 09/07/2023 notes_plat_sysinfo_1500= BIOS Revision: 1.10 notes_plat_sysinfo_1505= Firmware Revision: 1.10 hw_cpu_name = AMD EPYC 8224P hw_disk = 447 GB add more disk info here hw_memory001 = 188.460 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 1 hw_ncores = 24 hw_nthreadspercore = 2 prepared_by = root (is never output, only tags rawfile) sw_file = xfs sw_os001 = SUSE Linux Enterprise Server 15 SP4 sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program 654.roms_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 649.fotonik3d_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 621.wrf_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 619.lbm_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 607.cactuBSSN_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: power_management000 = BIOS and OS set to prefer performance at the cost power_management001 = of additional power usage notes_plat_form_000 = BIOS configuration: notes_plat_form_005 = Choose Operating Mode set to Maximum Performance and then set it to Custom Mode notes_plat_form_010 = NUMA Nodes per Socket set to NPS2