# Invocation command line: # /mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/bin/harness/runcpu --configfile amd_speed_aocc400_genoa_B1.cfg --tune base --reportable --iterations 2 --output_format csv,html,pdf,txt --define Dell-BIOS-inc=Dell-BIOS_EPYC-4.inc --define Dell-BIOS-LogProcD=1 --nopower --runmode speed --tune base --size test:train:refspeed fpspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 400 SPEC CPU 2017 V1.1.8 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc400_genoa_B1.cfg # Creation Date : October 6, 2022 # CPU 2017 Version : 1.1.8 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC 4.0.0 # Operating system version : RHEL 8.6 # Supported OS's : Ubuntu 22.04, RHEL 8.6/9, SLE 15 SP4 # Hardware : AMD Genoa (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 64-bit # Auto Parallelization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc400_genoa_B1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU 2017 under optimized conditions on AMD Genoa-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD Genoa microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc400_genoa_B1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on one socket AMD # Genoa-based servers with 96 cores, SMT enabled and 768 (64x12) GB of DDR5 # memory distributed evenly among all 12 channels using 64 GiB DIMMs. # # To run the binary package on other Genoa configurations, please review # "Readme.amd_speed_aocc400_genoa_B1.txt". In general, Genoa CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc400_genoa_B1.cfg" or any # other file besides "ini_amd_speed_aocc400_genoa_B1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 22.04, RHEL 8.6/9, and SLE 15 SP4. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Modifiable macros: ################################################################################ # "allow_build"" switch: # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc400 %define binary_package_name amd_speed_%{compiler_name}_genoa_B %define binary_package_ext %{binary_package_name} %define binary_package_revision 1 %define build_path ${SPEC} %define flags_file_name %{compiler_name}-flags.xml # Do NOT change build_lib_dir after the build or it will trigger a # rebuild of the xalanc. It should also remain literal: %define build_lib_dir amd_speed_aocc400_genoa_B_lib # To enable the platform file, be sure to uncomment the flagsurl02 header line # below in the Header settings. %define platform_file_name INVALID_platform_%{binary_package_name}.xml ################################################################################ # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc %define flags_inc_file_name %{binary_package_full_name}_flags.inc # Binary label extension: # Only modify the binary label extension if you plan to rebuild the binaries. # If you plan to recompile these CPU 2017 binaries, please choose a new extension # name below to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true above. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Note that AMD calls an external script to set up the compiler and library # paths before initiating the build. %define ext %{binary_package_ext} ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # retain:true is necessary to avoid gcc out-of-memory exceptions on certain SUTs: # oversize_threshold is required to support jemalloc 5.2.x+ preENV_MALLOC_CONF = oversize_threshold:0,retain:true preENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 0 # OpenMP environment variables: preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false preENV_OMP_STACKSIZE = 128M # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib:%{ENV_LD_LIBRARY_PATH} %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_genoa_B1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc400_genoa_B1.inc # File generation code date: October 11, 2022 # File generation date/time: March 09, 2023 / 20:45:16 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 128 %define physical_core_count 128 %define physical_core_max 127 %define logical_core_max 127 ################################################################################ ################################################################################ # The following inc blocks set the speed thread counts and affinity settings. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # # Selected thread counts from '9534' section of CPU info ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 128 preENV_GOMP_CPU_AFFINITY = 0-127 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 128 ENV_GOMP_CPU_AFFINITY = 0-127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 128 ENV_GOMP_CPU_AFFINITY = 0-127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 15 bind0 = numactl --physcpubind=15 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 128 603.bwaves_s,619.lbm_s,621.wrf_s,628.pop2_s,649.fotonik3d_s=peak: threads = 128 ENV_GOMP_CPU_AFFINITY = 0-127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 128 607.cactuBSSN_s,627.cam4_s,638.imagick_s,644.nab_s,657.xz_s=peak: threads = 128 ENV_GOMP_CPU_AFFINITY = 0-127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 128 654.roms_s=peak: threads = 128 ENV_GOMP_CPU_AFFINITY = 0 64 1 65 2 66 3 67 4 68 5 69 6 70 7 71 8 72 9 73 10 74 11 75 12 76 13 77 14 78 15 79 16 80 17 81 18 82 19 83 20 84 21 85 22 86 23 87 24 88 25 89 26 90 27 91 28 92 29 93 30 94 31 95 32 96 33 97 34 98 35 99 36 100 37 101 38 102 39 103 40 104 41 105 42 106 43 107 44 108 45 109 46 110 47 111 48 112 49 113 50 114 51 115 52 116 53 117 54 118 55 119 56 120 57 121 58 122 59 123 60 124 61 125 62 126 63 127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =9999 # (Your SPEC license number) tester =unknown tester test_sponsor =unknown sponsor hw_vendor =unknown vendor #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 4.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Nov-2022 sw_avail =Nov-2022 hw_cpu_name =AMD EPYC 9534 hw_cpu_nominal_mhz =2450 hw_cpu_max_mhz =3700 hw_ncores =128 hw_nthreadspercore =1 hw_ncpuorder =1,2 chips hw_other =None # Other perf-relevant hw, or "None" fw_bios =Version 0.0.0 released Dec-2022 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =1 MB I+D on chip per core hw_tcache000 =256 MB I+D on chip per chip, 32 MB shared / 8 hw_tcache001 = cores hw_ocache =None sw_other =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 9174F CPU + 1.5TiB Memory using RHEL 8.6 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 = notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_035 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_040 =To free node-local memory and avoid remote memory usage, notes_os_045 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_050 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_055 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_060 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. notes_os_065 = notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = # notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) # notes_jemalloc_005 =jemalloc 5.1.0 is available here: # notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 # notes_jemalloc_015 = # sw_other000 =jemalloc: jemalloc memory allocator library v5.1.0 ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (edit and uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = TDP: 400 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = PPT: 400 # notes_plat_010 = NPS: 4 # notes_plat_011 = Workload Profile = CPU Intensive # notes_plat_012 = TSME = Disabled # notes_plat_014 = SEV Control = Disabled # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intspeed: sw_peak_ptrsize =64-bit notes_os_thp_003 = ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fpspeed: sw_peak_ptrsize =Not Applicable notes_os_thp_015 =To always enable THP for peak runs of: notes_os_thp_020 =603.bwaves_s, 607.cactuBSSN_s, 619.lbm_s, 627.cam4_s, 628.pop2_s, 638.imagick_s, 644.nab_s, 649.fotonik3d_s: notes_os_thp_025 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_030 =run as root. notes_os_thp_035 =To disable THP for peak runs of 621.wrf_s: notes_os_thp_040 ='echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_045 =run as root. notes_os_thp_050 =To enable THP only on request for peak runs of 654.roms_s: notes_os_thp_055 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_060 =run as root. ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =unknown hw_nchips =2 prepared_by =prepared by unknown sw_file =unknown file sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/amd_speed_aocc400_genoa_B1.inc' # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib:%{ENV_LIBRARY_PATH} % define build_ncpus 16 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. #teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/aocc400-flags.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref #teeout = yes #teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ # Include the flags file: ################################################################################ #include: %{flags_inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_genoa_B1_flags.inc' ############################################################################ ################################################################################ # AMD AOCC 4.0.0 SPEC CPU2017 V1.1.8 Speed Configuration Flags for AMD64 Linux ################################################################################ # Compilers ################################################################################ default: CC = clang -m64 CXX = clang++ -m64 FC = flang -m64 CLD = clang -m64 CXXLD = clang++ -m64 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default: # data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # Default libraries and variables ################################################################################ default: # Libraries: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdalloc \ -lamdlibm \ -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM # Variables: OPT_ROOT = -march=znver4 \ $(VECMATHLIB) \ -ffast-math \ -fopenmp OPT_ROOT_BASE = -O3 \ $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast \ $(OPT_ROOT) \ -flto THP_ALWAYS = echo always > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag THP_NEVER = echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo never > /sys/kernel/mm/transparent_hugepage/defrag THP_MADVISE = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag DEFAULT_SUBMIT = echo "$command" > run.sh ; $BIND bash run.sh ############################################################################### # AOCC 4.0.0 workarounds that do not count as PORTABILITY ################################################################################ # The workarounds in this section would not qualify under the SPEC CPU # PORTABILITY rule. # - In peak, they can be set as needed for individual benchmarks. # - In base, individual settings are not allowed; set for whole suite. # Use EXTRA_CFLAGS, EXTRA_CXXFLAGS, and EXTRA_FFLAGS for them. # # See: # https://www.spec.org/cpu2017/Docs/runrules.html#portability # https://www.spec.org/cpu2017/Docs/runrules.html#BaseFlags ####################### # Default workarounds # ####################### default: # Allow unused compile/link arguments without triggering warnings during build: EXTRA_CFLAGS = -Wno-unused-command-line-argument EXTRA_CXXFLAGS = -Wno-unused-command-line-argument EXTRA_FFLAGS = -Wno-unused-command-line-argument LDOPTIONS = -Wno-unused-command-line-argument #################### # Base workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - base # ############################## intrate=base: # The following is necessary for 602 gcc: EXTRA_LDFLAGS = -z muldefs ######################### # FP workarounds - base # ######################### # # *** NONE *** # #################### # Peak workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - peak # ############################## 602.gcc_s=peak: #lang='C' EXTRA_LDFLAGS = -z muldefs ##################################### # Floating Point workarounds - peak # ##################################### # # *** NONE *** # ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -fstruct-layout=7 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 \ -fremap-arrays \ -fstrip-mining \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -unroll-threshold=100 \ -finline-aggressive \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching #other libraries # Put OpenMP and math libraries here: # -lm needed at the end for some transcendental functions: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = ######################### # intspeed tuning flags # ######################### intspeed: FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -optimize-strided-mem-cost EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 EXTRA_CXXFLAGS = -fvirtual-function-elimination \ -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition LDCXXFLAGS = LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split ############################## # intspeed base tuning flags # ############################## intspeed=base: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lflang \ -lm EXTRA_CLIBS = -lamdalloc EXTRA_CXXLIBS = -lamdalloc-ext EXTRA_FLIBS = -lamdalloc submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################## # intspeed peak tuning flags # ############################## intspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed base tuning flags # ############################# fpspeed=base: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed peak tuning flags # ############################# fpspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=9 \ -mllvm -unroll-threshold=50 \ -fremap-arrays \ -fstrip-mining \ -mllvm -inline-threshold=1000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_PEAK) -finline-aggressive \ -mllvm -unroll-threshold=100 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw # Benchmark specific peak tuning flags: 603.bwaves_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 607.cactuBSSN_s=peak: #lang='CXX,C,F' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 619.lbm_s=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 620.omnetpp_s=peak: #lang='CXX' EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang -lm 621.wrf_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT_BASE) \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt submit = ${THP_NEVER}; ${DEFAULT_SUBMIT} 623.xalancbmk_s=peak: #lang='CXX' EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 \ -Wl,-mllvm -Wl,-do-block-reorder=aggressive EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang \ -lm 627.cam4_s=peak: #lang='F,C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 628.pop2_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT) \ -Ofast \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 638.imagick_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 644.nab_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-region-vectorize submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 649.fotonik3d_s=peak: #lang='F' ENV_PGHPF_ZMEM = yes submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 654.roms_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_MADVISE}; ${DEFAULT_SUBMIT} 657.xz_s=peak: #lang='C' ENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 8 # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/amd_speed_aocc400_genoa_B1_flags.inc' # Dell Automation #include: Dell.inc # ----- Begin inclusion of 'Dell.inc' ############################################################################ #---------------------------- # Dell #--------------------------- # #------------------------------------------- # **** DO NOT EDIT BELOW HERE!!! #------------------------------------------- # Defined only if called from Automation %ifdef %{Dell-BIOS-inc} fprate,fpspeed,intrate,intspeed: power_management000 = BIOS and OS set to prefer performance power_management001 = at the cost of additional power usage. # #include: Dell-flags.inc # ----- Begin inclusion of 'Dell-flags.inc' ############################################################################ #------------------------------------------------------- # Dell EMC (Dell Inc.) # # AMD - Dell platform flags #------------------------------------------------------- default: flagsurl001=http://www.spec.org/cpu2017/flags/Dell-Platform-Flags-PowerEdge-AMD-EPYC-v1.0.xml # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell-flags.inc' #include: %{Dell-BIOS-inc} # ----- Begin inclusion of 'Dell-BIOS_EPYC-4.inc' ############################################################################ #------------------------------------------------------- # Dell # # AMD EPYC 4 (Genoa) #------------------------------------------------------- # # BIOS Settings # - It is rare that these settings would need to be changed. # fprate,fpspeed,intrate,intspeed: notes_plat_form_000 = notes_plat_form_005 = BIOS settings: notes_plat_form_010 = DRAM Refresh Delay : Performance notes_plat_form_015 = DIMM Self Healing on notes_plat_form_020 = Uncorrectable Memory Error : Disabled %ifdef %{Dell-BIOS-LogProcD} notes_plat_form_025 = Logical Processor : Disabled %endif notes_plat_form_030 = Virtualization Technology : Disabled fprate: notes_plat_form_210 = L1 Stride Prefetcher: : Disabled fprate,intrate,intspeed: notes_plat_form_215 = NUMA Nodes per Socket : 4 fprate,fpspeed,intrate,intspeed: notes_plat_form_035 = L3 Cache as NUMA Domain : Enabled notes_plat_form_040 = notes_plat_form_045 = System Profile : Custom fpspeed,intspeed: notes_plat_form_050 = C-States : Disabled fprate,fpspeed,intrate,intspeed: notes_plat_form_055 = Memory Patrol Scrub : Disabled notes_plat_form_060 = PCI ASPM L1 Link notes_plat_form_065 = Power Management : Disabled notes_plat_form_070 = Determinism Slider : Power Determinism fpspeed,intspeed: notes_plat_form_075 = Algorithm Performance notes_plat_form_080 = Boost Disable (ApbDis) : Enabled # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell-BIOS_EPYC-4.inc' #include: Dell-LIC.inc # ----- Begin inclusion of 'Dell-LIC.inc' ############################################################################ #------------------------------------------------------- # Dell (Dell Inc.) # # SPEC Licensing Info #------------------------------------------------------- fprate,fpspeed,intrate,intspeed: hw_vendor = Dell Inc. tester = Dell Inc. test_sponsor = Dell Inc. prepared_by = Dell Inc. # Old number 55 license_num = 6573 # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell-LIC.inc' #include: Dell-cleanup.inc # ----- Begin inclusion of 'Dell-cleanup.inc' ############################################################################ #------------------------------------------------------- # Dell EMC (Dell Inc.) # # AMD #------------------------------------------------------- # cleanup - sysinfo/AMD scripts fprate,fpspeed,intspeed,intrate: #sw_os000 = %undef% #sw_os001 = %undef% sw_os002 = %undef% #hw_memory000 = %undef% hw_memory001 = %undef% hw_memory002 = %undef% #hw_model000 = %undef% #hw_model001 = %undef% # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell-cleanup.inc' # #include: Dell-Autogen.inc # ----- Begin inclusion of 'Dell-Autogen.inc' ############################################################################ fprate,fpspeed,intrate,intspeed: hw_model = PowerEdge R7625 (AMD EPYC 9534 64-Core Processor) hw_cpu_name = AMD EPYC 9534 hw_ncpuorder = 1,2 chips hw_ncores = 128 hw_nthreadspercore = 1 fw_bios = Version 1.3.7 released Mar-2023 sw_state = Run level 5 (graphical multi-user) sw_file = tmpfs hw_disk = 125 GB on tmpfs notes_tmpfs_000 = notes_tmpfs_005 = Benchmark run from a 125 GB ramdisk created with the cmd: "mount -t tmpfs -o size=125G tmpfs /mnt/ramdisk" sw_os000 = Ubuntu 22.04.1 LTS sw_os001 = 5.15.0-60-generic hw_cpu_nominal_mhz = 2450 hw_memory000 = 1536 GB (24 x 64 GB 2Rx4 PC5-4800B-R) sw_avail = Feb-2023 hw_avail = May-2023 # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell-Autogen.inc' %endif # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell.inc' # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:2eb381fc1a58eb8122e4a1b875c1e38b3489dac84088192aa0ec6d157b084d06) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197 notes_plat_sysinfo_015 = running on ubuntu-genoa Thu Mar 9 21:55:12 2023 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = notes_plat_sysinfo_035 = ------------------------------------------------------------ notes_plat_sysinfo_040 = Table of contents notes_plat_sysinfo_045 = ------------------------------------------------------------ notes_plat_sysinfo_050 = 1. uname -a notes_plat_sysinfo_055 = 2. w notes_plat_sysinfo_060 = 3. Username notes_plat_sysinfo_065 = 4. ulimit -a notes_plat_sysinfo_070 = 5. sysinfo process ancestry notes_plat_sysinfo_075 = 6. /proc/cpuinfo notes_plat_sysinfo_080 = 7. lscpu notes_plat_sysinfo_085 = 8. numactl --hardware notes_plat_sysinfo_090 = 9. /proc/meminfo notes_plat_sysinfo_095 = 10. who -r notes_plat_sysinfo_100 = 11. Systemd service manager version: systemd 249 (249.11-0ubuntu3.6) notes_plat_sysinfo_105 = 12. Failed units, from systemctl list-units --state=failed notes_plat_sysinfo_110 = 13. Services, from systemctl list-unit-files notes_plat_sysinfo_115 = 14. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_120 = 15. cpupower frequency-info notes_plat_sysinfo_125 = 16. tuned-adm active notes_plat_sysinfo_130 = 17. sysctl notes_plat_sysinfo_135 = 18. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_140 = 19. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_145 = 20. OS release notes_plat_sysinfo_150 = 21. Disk information notes_plat_sysinfo_155 = 22. /sys/devices/virtual/dmi/id notes_plat_sysinfo_160 = 23. dmidecode notes_plat_sysinfo_165 = 24. BIOS notes_plat_sysinfo_170 = ------------------------------------------------------------ notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = ------------------------------------------------------------ notes_plat_sysinfo_185 = 1. uname -a notes_plat_sysinfo_190 = Linux ubuntu-genoa 5.15.0-60-generic #66-Ubuntu SMP Fri Jan 20 14:29:49 UTC 2023 x86_64 x86_64 x86_64 notes_plat_sysinfo_195 = GNU/Linux notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = ------------------------------------------------------------ notes_plat_sysinfo_210 = 2. w notes_plat_sysinfo_215 = 21:55:12 up 2:00, 1 user, load average: 6.86, 6.13, 3.54 notes_plat_sysinfo_220 = USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT notes_plat_sysinfo_225 = root tty1 - 20:22 1:10m 1.79s 0.45s /bin/bash ./amd_speed_aocc400_genoa_B1.sh notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = ------------------------------------------------------------ notes_plat_sysinfo_240 = 3. Username notes_plat_sysinfo_245 = From environment variable $USER: root notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = ------------------------------------------------------------ notes_plat_sysinfo_260 = 4. ulimit -a notes_plat_sysinfo_265 = time(seconds) unlimited notes_plat_sysinfo_270 = file(blocks) unlimited notes_plat_sysinfo_275 = data(kbytes) unlimited notes_plat_sysinfo_280 = stack(kbytes) unlimited notes_plat_sysinfo_285 = coredump(blocks) 0 notes_plat_sysinfo_290 = memory(kbytes) unlimited notes_plat_sysinfo_295 = locked memory(kbytes) 2097152 notes_plat_sysinfo_300 = process 6190427 notes_plat_sysinfo_305 = nofiles 1024 notes_plat_sysinfo_310 = vmemory(kbytes) unlimited notes_plat_sysinfo_315 = locks unlimited notes_plat_sysinfo_320 = rtprio 0 notes_plat_sysinfo_325 = notes_plat_sysinfo_330 = ------------------------------------------------------------ notes_plat_sysinfo_335 = 5. sysinfo process ancestry notes_plat_sysinfo_340 = /sbin/init notes_plat_sysinfo_345 = /bin/login -p -- notes_plat_sysinfo_350 = -bash notes_plat_sysinfo_355 = /bin/bash ./DELL_speed.sh notes_plat_sysinfo_360 = /bin/bash ./dell-run-main.sh speed notes_plat_sysinfo_365 = /bin/bash ./dell-run-main.sh speed notes_plat_sysinfo_370 = /bin/bash ./dell-run-specspeed.sh --output_format csv,html,pdf,txt -define notes_plat_sysinfo_375 = Dell-BIOS-inc=Dell-BIOS_EPYC-4.inc --define Dell-BIOS-LogProcD=1 notes_plat_sysinfo_380 = python3 ./run_amd_speed_aocc400_genoa_B1.py notes_plat_sysinfo_385 = /bin/bash ./amd_speed_aocc400_genoa_B1.sh notes_plat_sysinfo_390 = runcpu --config amd_speed_aocc400_genoa_B1.cfg --tune base --reportable --iterations 2 --output_format notes_plat_sysinfo_395 = csv,html,pdf,txt -define Dell-BIOS-inc=Dell-BIOS_EPYC-4.inc --define Dell-BIOS-LogProcD=1 fpspeed notes_plat_sysinfo_400 = runcpu --configfile amd_speed_aocc400_genoa_B1.cfg --tune base --reportable --iterations 2 --output_format notes_plat_sysinfo_405 = csv,html,pdf,txt --define Dell-BIOS-inc=Dell-BIOS_EPYC-4.inc --define Dell-BIOS-LogProcD=1 --nopower notes_plat_sysinfo_410 = --runmode speed --tune base --size test:train:refspeed fpspeed --nopreenv --note-preenv --logfile notes_plat_sysinfo_415 = $SPEC/tmp/CPU2017.002/templogs/preenv.fpspeed.002.0.log --lognum 002.0 --from_runcpu 2 notes_plat_sysinfo_420 = specperl $SPEC/bin/sysinfo notes_plat_sysinfo_425 = $SPEC = /mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e notes_plat_sysinfo_430 = notes_plat_sysinfo_435 = ------------------------------------------------------------ notes_plat_sysinfo_440 = 6. /proc/cpuinfo notes_plat_sysinfo_445 = model name : AMD EPYC 9534 64-Core Processor notes_plat_sysinfo_450 = vendor_id : AuthenticAMD notes_plat_sysinfo_455 = cpu family : 25 notes_plat_sysinfo_460 = model : 17 notes_plat_sysinfo_465 = stepping : 1 notes_plat_sysinfo_470 = microcode : 0xa101116 notes_plat_sysinfo_475 = bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass notes_plat_sysinfo_480 = TLB size : 3584 4K pages notes_plat_sysinfo_485 = cpu cores : 64 notes_plat_sysinfo_490 = siblings : 64 notes_plat_sysinfo_495 = 2 physical ids (chips) notes_plat_sysinfo_500 = 128 processors (hardware threads) notes_plat_sysinfo_505 = physical id 0: core ids 0-7,16-23,32-39,48-55,64-71,80-87,96-103,112-119 notes_plat_sysinfo_510 = physical id 1: core ids 0-7,16-23,32-39,48-55,64-71,80-87,96-103,112-119 notes_plat_sysinfo_515 = physical id 0: apicids 0-7,16-23,32-39,48-55,64-71,80-87,96-103,112-119 notes_plat_sysinfo_520 = physical id 1: apicids 128-135,144-151,160-167,176-183,192-199,208-215,224-231,240-247 notes_plat_sysinfo_525 = Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for notes_plat_sysinfo_530 = virtualized systems. Use the above data carefully. notes_plat_sysinfo_535 = notes_plat_sysinfo_540 = ------------------------------------------------------------ notes_plat_sysinfo_545 = 7. lscpu notes_plat_sysinfo_550 = notes_plat_sysinfo_555 = From lscpu from util-linux 2.37.2: notes_plat_sysinfo_560 = Architecture: x86_64 notes_plat_sysinfo_565 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_570 = Address sizes: 52 bits physical, 57 bits virtual notes_plat_sysinfo_575 = Byte Order: Little Endian notes_plat_sysinfo_580 = CPU(s): 128 notes_plat_sysinfo_585 = On-line CPU(s) list: 0-127 notes_plat_sysinfo_590 = Vendor ID: AuthenticAMD notes_plat_sysinfo_595 = Model name: AMD EPYC 9534 64-Core Processor notes_plat_sysinfo_600 = CPU family: 25 notes_plat_sysinfo_605 = Model: 17 notes_plat_sysinfo_610 = Thread(s) per core: 1 notes_plat_sysinfo_615 = Core(s) per socket: 64 notes_plat_sysinfo_620 = Socket(s): 2 notes_plat_sysinfo_625 = Stepping: 1 notes_plat_sysinfo_630 = Frequency boost: enabled notes_plat_sysinfo_635 = CPU max MHz: 3718.0659 notes_plat_sysinfo_640 = CPU min MHz: 1500.0000 notes_plat_sysinfo_645 = BogoMIPS: 4901.77 notes_plat_sysinfo_650 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 notes_plat_sysinfo_655 = clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm notes_plat_sysinfo_660 = constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl notes_plat_sysinfo_665 = pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe notes_plat_sysinfo_670 = popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy notes_plat_sysinfo_675 = abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext notes_plat_sysinfo_680 = perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 notes_plat_sysinfo_685 = invpcid_single hw_pstate ssbd mba ibrs ibpb stibp vmmcall fsgsbase bmi1 notes_plat_sysinfo_690 = avx2 smep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap notes_plat_sysinfo_695 = avx512ifma clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt notes_plat_sysinfo_700 = xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local notes_plat_sysinfo_705 = avx512_bf16 clzero irperf xsaveerptr rdpru wbnoinvd amd_ppin cppc arat npt notes_plat_sysinfo_710 = lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists notes_plat_sysinfo_715 = pausefilter pfthreshold avic v_vmsave_vmload vgif v_spec_ctrl avx512vbmi notes_plat_sysinfo_720 = umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg notes_plat_sysinfo_725 = avx512_vpopcntdq la57 rdpid overflow_recov succor smca fsrm flush_l1d notes_plat_sysinfo_730 = Virtualization: AMD-V notes_plat_sysinfo_735 = L1d cache: 4 MiB (128 instances) notes_plat_sysinfo_740 = L1i cache: 4 MiB (128 instances) notes_plat_sysinfo_745 = L2 cache: 128 MiB (128 instances) notes_plat_sysinfo_750 = L3 cache: 512 MiB (16 instances) notes_plat_sysinfo_755 = NUMA node(s): 2 notes_plat_sysinfo_760 = NUMA node0 CPU(s): 0-63 notes_plat_sysinfo_765 = NUMA node1 CPU(s): 64-127 notes_plat_sysinfo_770 = Vulnerability Itlb multihit: Not affected notes_plat_sysinfo_775 = Vulnerability L1tf: Not affected notes_plat_sysinfo_780 = Vulnerability Mds: Not affected notes_plat_sysinfo_785 = Vulnerability Meltdown: Not affected notes_plat_sysinfo_790 = Vulnerability Mmio stale data: Not affected notes_plat_sysinfo_795 = Vulnerability Retbleed: Not affected notes_plat_sysinfo_800 = Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl and seccomp notes_plat_sysinfo_805 = Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization notes_plat_sysinfo_810 = Vulnerability Spectre v2: Mitigation; Retpolines, IBPB conditional, IBRS_FW, STIBP disabled, RSB notes_plat_sysinfo_815 = filling, PBRSB-eIBRS Not affected notes_plat_sysinfo_820 = Vulnerability Srbds: Not affected notes_plat_sysinfo_825 = Vulnerability Tsx async abort: Not affected notes_plat_sysinfo_830 = notes_plat_sysinfo_835 = From lscpu --cache: notes_plat_sysinfo_840 = NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE notes_plat_sysinfo_845 = L1d 32K 4M 8 Data 1 64 1 64 notes_plat_sysinfo_850 = L1i 32K 4M 8 Instruction 1 64 1 64 notes_plat_sysinfo_855 = L2 1M 128M 8 Unified 2 2048 1 64 notes_plat_sysinfo_860 = L3 32M 512M 16 Unified 3 32768 1 64 notes_plat_sysinfo_865 = notes_plat_sysinfo_870 = ------------------------------------------------------------ notes_plat_sysinfo_875 = 8. numactl --hardware notes_plat_sysinfo_880 = NOTE: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_885 = available: 2 nodes (0-1) notes_plat_sysinfo_890 = node 0 cpus: 0-63 notes_plat_sysinfo_895 = node 0 size: 773654 MB notes_plat_sysinfo_900 = node 0 free: 771918 MB notes_plat_sysinfo_905 = node 1 cpus: 64-127 notes_plat_sysinfo_910 = node 1 size: 774063 MB notes_plat_sysinfo_915 = node 1 free: 768179 MB notes_plat_sysinfo_920 = node distances: notes_plat_sysinfo_925 = node 0 1 notes_plat_sysinfo_930 = 0: 10 32 notes_plat_sysinfo_935 = 1: 32 10 notes_plat_sysinfo_940 = notes_plat_sysinfo_945 = ------------------------------------------------------------ notes_plat_sysinfo_950 = 9. /proc/meminfo notes_plat_sysinfo_955 = MemTotal: 1584863156 kB notes_plat_sysinfo_960 = notes_plat_sysinfo_965 = ------------------------------------------------------------ notes_plat_sysinfo_970 = 10. who -r notes_plat_sysinfo_975 = run-level 5 Mar 9 19:57 notes_plat_sysinfo_980 = notes_plat_sysinfo_985 = ------------------------------------------------------------ notes_plat_sysinfo_990 = 11. Systemd service manager version: systemd 249 (249.11-0ubuntu3.6) notes_plat_sysinfo_995 = Default Target Status notes_plat_sysinfo_1000= graphical degraded notes_plat_sysinfo_1005= notes_plat_sysinfo_1010= ------------------------------------------------------------ notes_plat_sysinfo_1015= 12. Failed units, from systemctl list-units --state=failed notes_plat_sysinfo_1020= UNIT LOAD ACTIVE SUB DESCRIPTION notes_plat_sysinfo_1025= * systemd-networkd-wait-online.service loaded failed failed Wait for Network to be Configured notes_plat_sysinfo_1030= notes_plat_sysinfo_1035= ------------------------------------------------------------ notes_plat_sysinfo_1040= 13. Services, from systemctl list-unit-files notes_plat_sysinfo_1045= STATE UNIT FILES notes_plat_sysinfo_1050= enabled ModemManager apparmor blk-availability cloud-config cloud-final cloud-init notes_plat_sysinfo_1055= cloud-init-local console-setup cron dmesg e2scrub_reap finalrd getty@ gpu-manager notes_plat_sysinfo_1060= grub-common grub-initrd-fallback irqbalance keyboard-setup lm-sensors lvm2-monitor notes_plat_sysinfo_1065= lxd-agent multipathd networkd-dispatcher open-iscsi open-vm-tools pollinate rsyslog notes_plat_sysinfo_1070= secureboot-db setvtrgb ssh systemd-networkd systemd-networkd-wait-online systemd-pstore notes_plat_sysinfo_1075= systemd-resolved systemd-timesyncd thermald tuned ua-reboot-cmds ubuntu-advantage udisks2 notes_plat_sysinfo_1080= ufw vgauth notes_plat_sysinfo_1085= enabled-runtime netplan-ovs-cleanup systemd-fsck-root systemd-remount-fs notes_plat_sysinfo_1090= disabled console-getty debug-shell iscsid nftables rsync serial-getty@ notes_plat_sysinfo_1095= systemd-boot-check-no-failures systemd-network-generator systemd-sysext notes_plat_sysinfo_1100= systemd-time-wait-sync upower notes_plat_sysinfo_1105= generated apport notes_plat_sysinfo_1110= indirect uuidd notes_plat_sysinfo_1115= masked cryptdisks cryptdisks-early hwclock lvm2 multipath-tools-boot rc rcS screen-cleanup sudo notes_plat_sysinfo_1120= x11-common notes_plat_sysinfo_1125= notes_plat_sysinfo_1130= ------------------------------------------------------------ notes_plat_sysinfo_1135= 14. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_1140= BOOT_IMAGE=/vmlinuz-5.15.0-60-generic notes_plat_sysinfo_1145= root=/dev/mapper/ubuntu--vg-ubuntu--lv notes_plat_sysinfo_1150= ro notes_plat_sysinfo_1155= notes_plat_sysinfo_1160= ------------------------------------------------------------ notes_plat_sysinfo_1165= 15. cpupower frequency-info notes_plat_sysinfo_1170= analyzing CPU 0: notes_plat_sysinfo_1175= current policy: frequency should be within 1.50 GHz and 2.45 GHz. notes_plat_sysinfo_1180= The governor "performance" may decide which speed to use notes_plat_sysinfo_1185= within this range. notes_plat_sysinfo_1190= boost state support: notes_plat_sysinfo_1195= Supported: yes notes_plat_sysinfo_1200= Active: yes notes_plat_sysinfo_1205= Boost States: 0 notes_plat_sysinfo_1210= Total States: 3 notes_plat_sysinfo_1215= Pstate-P0: 2450MHz notes_plat_sysinfo_1220= notes_plat_sysinfo_1225= ------------------------------------------------------------ notes_plat_sysinfo_1230= 16. tuned-adm active notes_plat_sysinfo_1235= Current active profile: latency-performance notes_plat_sysinfo_1240= notes_plat_sysinfo_1245= ------------------------------------------------------------ notes_plat_sysinfo_1250= 17. sysctl notes_plat_sysinfo_1255= kernel.numa_balancing 1 notes_plat_sysinfo_1260= kernel.randomize_va_space 0 notes_plat_sysinfo_1265= vm.compaction_proactiveness 20 notes_plat_sysinfo_1270= vm.dirty_background_bytes 0 notes_plat_sysinfo_1275= vm.dirty_background_ratio 3 notes_plat_sysinfo_1280= vm.dirty_bytes 0 notes_plat_sysinfo_1285= vm.dirty_expire_centisecs 3000 notes_plat_sysinfo_1290= vm.dirty_ratio 8 notes_plat_sysinfo_1295= vm.dirty_writeback_centisecs 500 notes_plat_sysinfo_1300= vm.dirtytime_expire_seconds 43200 notes_plat_sysinfo_1305= vm.extfrag_threshold 500 notes_plat_sysinfo_1310= vm.min_unmapped_ratio 1 notes_plat_sysinfo_1315= vm.nr_hugepages 0 notes_plat_sysinfo_1320= vm.nr_hugepages_mempolicy 0 notes_plat_sysinfo_1325= vm.nr_overcommit_hugepages 0 notes_plat_sysinfo_1330= vm.swappiness 1 notes_plat_sysinfo_1335= vm.watermark_boost_factor 15000 notes_plat_sysinfo_1340= vm.watermark_scale_factor 10 notes_plat_sysinfo_1345= vm.zone_reclaim_mode 1 notes_plat_sysinfo_1350= notes_plat_sysinfo_1355= ------------------------------------------------------------ notes_plat_sysinfo_1360= 18. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_1365= defrag [always] defer defer+madvise madvise never notes_plat_sysinfo_1370= enabled [always] madvise never notes_plat_sysinfo_1375= hpage_pmd_size 2097152 notes_plat_sysinfo_1380= shmem_enabled always within_size advise [never] deny force notes_plat_sysinfo_1385= notes_plat_sysinfo_1390= ------------------------------------------------------------ notes_plat_sysinfo_1395= 19. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_1400= alloc_sleep_millisecs 60000 notes_plat_sysinfo_1405= defrag 1 notes_plat_sysinfo_1410= max_ptes_none 511 notes_plat_sysinfo_1415= max_ptes_shared 256 notes_plat_sysinfo_1420= max_ptes_swap 64 notes_plat_sysinfo_1425= pages_to_scan 4096 notes_plat_sysinfo_1430= scan_sleep_millisecs 10000 notes_plat_sysinfo_1435= notes_plat_sysinfo_1440= ------------------------------------------------------------ notes_plat_sysinfo_1445= 20. OS release notes_plat_sysinfo_1450= From /etc/*-release /etc/*-version notes_plat_sysinfo_1455= os-release Ubuntu 22.04.1 LTS notes_plat_sysinfo_1460= notes_plat_sysinfo_1465= ------------------------------------------------------------ notes_plat_sysinfo_1470= 21. Disk information notes_plat_sysinfo_1475= SPEC is set to: /mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e notes_plat_sysinfo_1480= Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_1485= tmpfs tmpfs 125G 3.5G 122G 3% /mnt/ramdisk notes_plat_sysinfo_1490= notes_plat_sysinfo_1495= ------------------------------------------------------------ notes_plat_sysinfo_1500= 22. /sys/devices/virtual/dmi/id notes_plat_sysinfo_1505= Vendor: Dell Inc. notes_plat_sysinfo_1510= Product: PowerEdge R7625 notes_plat_sysinfo_1515= Product Family: PowerEdge notes_plat_sysinfo_1520= Serial: 1234567 notes_plat_sysinfo_1525= notes_plat_sysinfo_1530= ------------------------------------------------------------ notes_plat_sysinfo_1535= 23. dmidecode notes_plat_sysinfo_1540= Additional information from dmidecode 3.3 follows. WARNING: Use caution when you interpret this section. notes_plat_sysinfo_1545= The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_1550= determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the notes_plat_sysinfo_1555= "DMTF SMBIOS" standard. notes_plat_sysinfo_1560= Memory: notes_plat_sysinfo_1565= 2x 80CE000080CE M321R8GA0BB0-CQKEG 64 GB 2 rank 4800 notes_plat_sysinfo_1570= 22x 80CE000080CE M321R8GA0BB0-CQKVG 64 GB 2 rank 4800 notes_plat_sysinfo_1575= notes_plat_sysinfo_1580= notes_plat_sysinfo_1585= ------------------------------------------------------------ notes_plat_sysinfo_1590= 24. BIOS notes_plat_sysinfo_1595= (This section combines info from /sys/devices and dmidecode.) notes_plat_sysinfo_1600= BIOS Vendor: Dell Inc. notes_plat_sysinfo_1605= BIOS Version: 1.3.7 notes_plat_sysinfo_1610= BIOS Date: 03/06/2023 notes_plat_sysinfo_1615= BIOS Revision: 1.3 hw_cpu_name = AMD EPYC 9534 hw_disk = 125 GB add more disk info here hw_nchips = 2 hw_ncores = 128 hw_nthreadspercore = 1 prepared_by = root (is never output, only tags rawfile) sw_file = tmpfs sw_os001 = Ubuntu 22.04.1 LTS sw_state = Run level 5 (add definition here) # End of settings added by sysinfo_program