# Invocation command line: # /mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/bin/harness/runcpu --configfile amd_speed_aocc400_genoa_B1.cfg --tune base --reportable --iterations 2 --output_format csv,html,pdf,txt --define Dell-BIOS-inc=Dell-BIOS_EPYC-4.inc --define Dell-BIOS-LogProcD=1 --nopower --runmode speed --tune base --size test:train:refspeed fpspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 400 SPEC CPU 2017 V1.1.8 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc400_genoa_B1.cfg # Creation Date : October 6, 2022 # CPU 2017 Version : 1.1.8 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC 4.0.0 # Operating system version : RHEL 8.6 # Supported OS's : Ubuntu 22.04, RHEL 8.6/9, SLE 15 SP4 # Hardware : AMD Genoa (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 64-bit # Auto Parallelization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc400_genoa_B1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU 2017 under optimized conditions on AMD Genoa-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD Genoa microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc400_genoa_B1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on one socket AMD # Genoa-based servers with 96 cores, SMT enabled and 768 (64x12) GB of DDR5 # memory distributed evenly among all 12 channels using 64 GiB DIMMs. # # To run the binary package on other Genoa configurations, please review # "Readme.amd_speed_aocc400_genoa_B1.txt". In general, Genoa CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc400_genoa_B1.cfg" or any # other file besides "ini_amd_speed_aocc400_genoa_B1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 22.04, RHEL 8.6/9, and SLE 15 SP4. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Modifiable macros: ################################################################################ # "allow_build"" switch: # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc400 %define binary_package_name amd_speed_%{compiler_name}_genoa_B %define binary_package_ext %{binary_package_name} %define binary_package_revision 1 %define build_path ${SPEC} %define flags_file_name %{compiler_name}-flags.xml # Do NOT change build_lib_dir after the build or it will trigger a # rebuild of the xalanc. It should also remain literal: %define build_lib_dir amd_speed_aocc400_genoa_B_lib # To enable the platform file, be sure to uncomment the flagsurl02 header line # below in the Header settings. %define platform_file_name INVALID_platform_%{binary_package_name}.xml ################################################################################ # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc %define flags_inc_file_name %{binary_package_full_name}_flags.inc # Binary label extension: # Only modify the binary label extension if you plan to rebuild the binaries. # If you plan to recompile these CPU 2017 binaries, please choose a new extension # name below to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true above. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Note that AMD calls an external script to set up the compiler and library # paths before initiating the build. %define ext %{binary_package_ext} ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # retain:true is necessary to avoid gcc out-of-memory exceptions on certain SUTs: # oversize_threshold is required to support jemalloc 5.2.x+ preENV_MALLOC_CONF = oversize_threshold:0,retain:true preENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 0 # OpenMP environment variables: preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false preENV_OMP_STACKSIZE = 128M # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib:%{ENV_LD_LIBRARY_PATH} %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_genoa_B1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc400_genoa_B1.inc # File generation code date: October 11, 2022 # File generation date/time: March 09, 2023 / 21:26:15 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 168 %define physical_core_count 168 %define physical_core_max 167 %define logical_core_max 167 ################################################################################ ################################################################################ # The following inc blocks set the speed thread counts and affinity settings. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # # Selected thread counts from '9634' section of CPU info ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 168 preENV_GOMP_CPU_AFFINITY = 0-167 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 168 ENV_GOMP_CPU_AFFINITY = 0-167 bind0 = numactl --physcpubind=0-167 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 168 ENV_GOMP_CPU_AFFINITY = 0-167 bind0 = numactl --physcpubind=0-167 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 15 bind0 = numactl --physcpubind=15 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 168 603.bwaves_s,619.lbm_s,621.wrf_s,628.pop2_s,649.fotonik3d_s=peak: threads = 168 ENV_GOMP_CPU_AFFINITY = 0-167 bind0 = numactl --physcpubind=0-167 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 168 607.cactuBSSN_s,627.cam4_s,638.imagick_s,644.nab_s,657.xz_s=peak: threads = 168 ENV_GOMP_CPU_AFFINITY = 0-167 bind0 = numactl --physcpubind=0-167 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 168 654.roms_s=peak: threads = 168 ENV_GOMP_CPU_AFFINITY = 0 84 1 85 2 86 3 87 4 88 5 89 6 90 7 91 8 92 9 93 10 94 11 95 12 96 13 97 14 98 15 99 16 100 17 101 18 102 19 103 20 104 21 105 22 106 23 107 24 108 25 109 26 110 27 111 28 112 29 113 30 114 31 115 32 116 33 117 34 118 35 119 36 120 37 121 38 122 39 123 40 124 41 125 42 126 43 127 44 128 45 129 46 130 47 131 48 132 49 133 50 134 51 135 52 136 53 137 54 138 55 139 56 140 57 141 58 142 59 143 60 144 61 145 62 146 63 147 64 148 65 149 66 150 67 151 68 152 69 153 70 154 71 155 72 156 73 157 74 158 75 159 76 160 77 161 78 162 79 163 80 164 81 165 82 166 83 167 bind0 = numactl --physcpubind=0-167 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =9999 # (Your SPEC license number) tester =unknown tester test_sponsor =unknown sponsor hw_vendor =unknown vendor #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 4.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Nov-2022 sw_avail =Nov-2022 hw_cpu_name =AMD EPYC 9634 hw_cpu_nominal_mhz =2000 hw_cpu_max_mhz =3700 hw_ncores =168 hw_nthreadspercore =1 hw_ncpuorder =1,2 chips hw_other =None # Other perf-relevant hw, or "None" fw_bios =Version 0.0.0 released Dec-2022 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =1 MB I+D on chip per core hw_tcache000 =384 MB I+D on chip per chip, 32 MB shared / 7 hw_tcache001 = cores hw_ocache =None sw_other =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 9174F CPU + 1.5TiB Memory using RHEL 8.6 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 = notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_035 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_040 =To free node-local memory and avoid remote memory usage, notes_os_045 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_050 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_055 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_060 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. notes_os_065 = notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = # notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) # notes_jemalloc_005 =jemalloc 5.1.0 is available here: # notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 # notes_jemalloc_015 = # sw_other000 =jemalloc: jemalloc memory allocator library v5.1.0 ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (edit and uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = TDP: 400 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = PPT: 400 # notes_plat_010 = NPS: 4 # notes_plat_011 = Workload Profile = CPU Intensive # notes_plat_012 = TSME = Disabled # notes_plat_014 = SEV Control = Disabled # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intspeed: sw_peak_ptrsize =64-bit notes_os_thp_003 = ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fpspeed: sw_peak_ptrsize =Not Applicable notes_os_thp_015 =To always enable THP for peak runs of: notes_os_thp_020 =603.bwaves_s, 607.cactuBSSN_s, 619.lbm_s, 627.cam4_s, 628.pop2_s, 638.imagick_s, 644.nab_s, 649.fotonik3d_s: notes_os_thp_025 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_030 =run as root. notes_os_thp_035 =To disable THP for peak runs of 621.wrf_s: notes_os_thp_040 ='echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_045 =run as root. notes_os_thp_050 =To enable THP only on request for peak runs of 654.roms_s: notes_os_thp_055 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_060 =run as root. ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =unknown hw_nchips =2 prepared_by =prepared by unknown sw_file =unknown file sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/amd_speed_aocc400_genoa_B1.inc' # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib:%{ENV_LIBRARY_PATH} % define build_ncpus 16 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. #teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/aocc400-flags.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref #teeout = yes #teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ # Include the flags file: ################################################################################ #include: %{flags_inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_genoa_B1_flags.inc' ############################################################################ ################################################################################ # AMD AOCC 4.0.0 SPEC CPU2017 V1.1.8 Speed Configuration Flags for AMD64 Linux ################################################################################ # Compilers ################################################################################ default: CC = clang -m64 CXX = clang++ -m64 FC = flang -m64 CLD = clang -m64 CXXLD = clang++ -m64 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default: # data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # Default libraries and variables ################################################################################ default: # Libraries: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdalloc \ -lamdlibm \ -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM # Variables: OPT_ROOT = -march=znver4 \ $(VECMATHLIB) \ -ffast-math \ -fopenmp OPT_ROOT_BASE = -O3 \ $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast \ $(OPT_ROOT) \ -flto THP_ALWAYS = echo always > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag THP_NEVER = echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo never > /sys/kernel/mm/transparent_hugepage/defrag THP_MADVISE = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag DEFAULT_SUBMIT = echo "$command" > run.sh ; $BIND bash run.sh ############################################################################### # AOCC 4.0.0 workarounds that do not count as PORTABILITY ################################################################################ # The workarounds in this section would not qualify under the SPEC CPU # PORTABILITY rule. # - In peak, they can be set as needed for individual benchmarks. # - In base, individual settings are not allowed; set for whole suite. # Use EXTRA_CFLAGS, EXTRA_CXXFLAGS, and EXTRA_FFLAGS for them. # # See: # https://www.spec.org/cpu2017/Docs/runrules.html#portability # https://www.spec.org/cpu2017/Docs/runrules.html#BaseFlags ####################### # Default workarounds # ####################### default: # Allow unused compile/link arguments without triggering warnings during build: EXTRA_CFLAGS = -Wno-unused-command-line-argument EXTRA_CXXFLAGS = -Wno-unused-command-line-argument EXTRA_FFLAGS = -Wno-unused-command-line-argument LDOPTIONS = -Wno-unused-command-line-argument #################### # Base workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - base # ############################## intrate=base: # The following is necessary for 602 gcc: EXTRA_LDFLAGS = -z muldefs ######################### # FP workarounds - base # ######################### # # *** NONE *** # #################### # Peak workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - peak # ############################## 602.gcc_s=peak: #lang='C' EXTRA_LDFLAGS = -z muldefs ##################################### # Floating Point workarounds - peak # ##################################### # # *** NONE *** # ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -fstruct-layout=7 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 \ -fremap-arrays \ -fstrip-mining \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -unroll-threshold=100 \ -finline-aggressive \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching #other libraries # Put OpenMP and math libraries here: # -lm needed at the end for some transcendental functions: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = ######################### # intspeed tuning flags # ######################### intspeed: FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -optimize-strided-mem-cost EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 EXTRA_CXXFLAGS = -fvirtual-function-elimination \ -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition LDCXXFLAGS = LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split ############################## # intspeed base tuning flags # ############################## intspeed=base: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lflang \ -lm EXTRA_CLIBS = -lamdalloc EXTRA_CXXLIBS = -lamdalloc-ext EXTRA_FLIBS = -lamdalloc submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################## # intspeed peak tuning flags # ############################## intspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed base tuning flags # ############################# fpspeed=base: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed peak tuning flags # ############################# fpspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=9 \ -mllvm -unroll-threshold=50 \ -fremap-arrays \ -fstrip-mining \ -mllvm -inline-threshold=1000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_PEAK) -finline-aggressive \ -mllvm -unroll-threshold=100 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw # Benchmark specific peak tuning flags: 603.bwaves_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 607.cactuBSSN_s=peak: #lang='CXX,C,F' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 619.lbm_s=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 620.omnetpp_s=peak: #lang='CXX' EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang -lm 621.wrf_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT_BASE) \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt submit = ${THP_NEVER}; ${DEFAULT_SUBMIT} 623.xalancbmk_s=peak: #lang='CXX' EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 \ -Wl,-mllvm -Wl,-do-block-reorder=aggressive EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang \ -lm 627.cam4_s=peak: #lang='F,C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 628.pop2_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT) \ -Ofast \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 638.imagick_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 644.nab_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-region-vectorize submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 649.fotonik3d_s=peak: #lang='F' ENV_PGHPF_ZMEM = yes submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 654.roms_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_MADVISE}; ${DEFAULT_SUBMIT} 657.xz_s=peak: #lang='C' ENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 8 # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/amd_speed_aocc400_genoa_B1_flags.inc' # Dell Automation #include: Dell.inc # ----- Begin inclusion of 'Dell.inc' ############################################################################ #---------------------------- # Dell #--------------------------- # #------------------------------------------- # **** DO NOT EDIT BELOW HERE!!! #------------------------------------------- # Defined only if called from Automation %ifdef %{Dell-BIOS-inc} fprate,fpspeed,intrate,intspeed: power_management000 = BIOS and OS set to prefer performance power_management001 = at the cost of additional power usage. # #include: Dell-flags.inc # ----- Begin inclusion of 'Dell-flags.inc' ############################################################################ #------------------------------------------------------- # Dell EMC (Dell Inc.) # # AMD - Dell platform flags #------------------------------------------------------- default: flagsurl001=http://www.spec.org/cpu2017/flags/Dell-Platform-Flags-PowerEdge-AMD-EPYC-v1.0.xml # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell-flags.inc' #include: %{Dell-BIOS-inc} # ----- Begin inclusion of 'Dell-BIOS_EPYC-4.inc' ############################################################################ #------------------------------------------------------- # Dell # # AMD EPYC 4 (Genoa) #------------------------------------------------------- # # BIOS Settings # - It is rare that these settings would need to be changed. # fprate,fpspeed,intrate,intspeed: notes_plat_form_000 = notes_plat_form_005 = BIOS settings: notes_plat_form_010 = DRAM Refresh Delay : Performance notes_plat_form_015 = DIMM Self Healing on notes_plat_form_020 = Uncorrectable Memory Error : Disabled %ifdef %{Dell-BIOS-LogProcD} notes_plat_form_025 = Logical Processor : Disabled %endif notes_plat_form_030 = Virtualization Technology : Disabled fprate: notes_plat_form_210 = L1 Stride Prefetcher: : Disabled fprate,intrate,intspeed: notes_plat_form_215 = NUMA Nodes per Socket : 4 fprate,fpspeed,intrate,intspeed: notes_plat_form_035 = L3 Cache as NUMA Domain : Enabled notes_plat_form_040 = notes_plat_form_045 = System Profile : Custom fpspeed,intspeed: notes_plat_form_050 = C-States : Disabled fprate,fpspeed,intrate,intspeed: notes_plat_form_055 = Memory Patrol Scrub : Disabled notes_plat_form_060 = PCI ASPM L1 Link notes_plat_form_065 = Power Management : Disabled notes_plat_form_070 = Determinism Slider : Power Determinism fpspeed,intspeed: notes_plat_form_075 = Algorithm Performance notes_plat_form_080 = Boost Disable (ApbDis) : Enabled # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell-BIOS_EPYC-4.inc' #include: Dell-LIC.inc # ----- Begin inclusion of 'Dell-LIC.inc' ############################################################################ #------------------------------------------------------- # Dell (Dell Inc.) # # SPEC Licensing Info #------------------------------------------------------- fprate,fpspeed,intrate,intspeed: hw_vendor = Dell Inc. tester = Dell Inc. test_sponsor = Dell Inc. prepared_by = Dell Inc. # Old number 55 license_num = 6573 # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell-LIC.inc' #include: Dell-cleanup.inc # ----- Begin inclusion of 'Dell-cleanup.inc' ############################################################################ #------------------------------------------------------- # Dell EMC (Dell Inc.) # # AMD #------------------------------------------------------- # cleanup - sysinfo/AMD scripts fprate,fpspeed,intspeed,intrate: #sw_os000 = %undef% #sw_os001 = %undef% sw_os002 = %undef% #hw_memory000 = %undef% hw_memory001 = %undef% hw_memory002 = %undef% #hw_model000 = %undef% #hw_model001 = %undef% # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell-cleanup.inc' # #include: Dell-Autogen.inc # ----- Begin inclusion of 'Dell-Autogen.inc' ############################################################################ fprate,fpspeed,intrate,intspeed: hw_model = PowerEdge R6625 (AMD EPYC 9634 84-Core Processor) hw_cpu_name = AMD EPYC 9634 hw_ncpuorder = 1,2 chips hw_ncores = 168 hw_nthreadspercore = 1 fw_bios = Version 1.3.7 released Mar-2023 sw_state = Run level 3 (multi-user) sw_file = tmpfs hw_disk = 125 GB on tmpfs notes_tmpfs_000 = notes_tmpfs_005 = Benchmark run from a 125 GB ramdisk created with the cmd: "mount -t tmpfs -o size=125G tmpfs /mnt/ramdisk" sw_os000 = Ubuntu 22.04.1 LTS sw_os001 = 5.15.0-46-generic hw_cpu_nominal_mhz = 2250 hw_memory000 = 1536 GB (24 x 64 GB 2Rx4 PC5-4800B-R) sw_avail = Nov-2022 hw_avail = Mar-2023 # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell-Autogen.inc' %endif # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/config/Dell.inc' # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:2eb381fc1a58eb8122e4a1b875c1e38b3489dac84088192aa0ec6d157b084d06) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197 notes_plat_sysinfo_015 = running on genoa-sut Thu Mar 9 21:26:25 2023 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = notes_plat_sysinfo_035 = ------------------------------------------------------------ notes_plat_sysinfo_040 = Table of contents notes_plat_sysinfo_045 = ------------------------------------------------------------ notes_plat_sysinfo_050 = 1. uname -a notes_plat_sysinfo_055 = 2. w notes_plat_sysinfo_060 = 3. Username notes_plat_sysinfo_065 = 4. ulimit -a notes_plat_sysinfo_070 = 5. sysinfo process ancestry notes_plat_sysinfo_075 = 6. /proc/cpuinfo notes_plat_sysinfo_080 = 7. lscpu notes_plat_sysinfo_085 = 8. numactl --hardware notes_plat_sysinfo_090 = 9. /proc/meminfo notes_plat_sysinfo_095 = 10. who -r notes_plat_sysinfo_100 = 11. Systemd service manager version: systemd 249 (249.11-0ubuntu3.4) notes_plat_sysinfo_105 = 12. Services, from systemctl list-unit-files notes_plat_sysinfo_110 = 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_115 = 14. cpupower frequency-info notes_plat_sysinfo_120 = 15. tuned-adm active notes_plat_sysinfo_125 = 16. sysctl notes_plat_sysinfo_130 = 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_135 = 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_140 = 19. OS release notes_plat_sysinfo_145 = 20. Disk information notes_plat_sysinfo_150 = 21. /sys/devices/virtual/dmi/id notes_plat_sysinfo_155 = 22. dmidecode notes_plat_sysinfo_160 = 23. BIOS notes_plat_sysinfo_165 = ------------------------------------------------------------ notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = ------------------------------------------------------------ notes_plat_sysinfo_180 = 1. uname -a notes_plat_sysinfo_185 = Linux genoa-sut 5.15.0-46-generic #49-Ubuntu SMP Thu Aug 4 18:03:25 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = ------------------------------------------------------------ notes_plat_sysinfo_200 = 2. w notes_plat_sysinfo_205 = 21:26:25 up 2 min, 1 user, load average: 1.00, 1.80, 0.85 notes_plat_sysinfo_210 = USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT notes_plat_sysinfo_215 = root tty1 - 21:24 41.00s 1.84s 0.37s /bin/bash ./amd_speed_aocc400_genoa_B1.sh notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = ------------------------------------------------------------ notes_plat_sysinfo_230 = 3. Username notes_plat_sysinfo_235 = From environment variable $USER: root notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = ------------------------------------------------------------ notes_plat_sysinfo_250 = 4. ulimit -a notes_plat_sysinfo_255 = time(seconds) unlimited notes_plat_sysinfo_260 = file(blocks) unlimited notes_plat_sysinfo_265 = data(kbytes) unlimited notes_plat_sysinfo_270 = stack(kbytes) unlimited notes_plat_sysinfo_275 = coredump(blocks) 0 notes_plat_sysinfo_280 = memory(kbytes) unlimited notes_plat_sysinfo_285 = locked memory(kbytes) 2097152 notes_plat_sysinfo_290 = process 6190359 notes_plat_sysinfo_295 = nofiles 1024 notes_plat_sysinfo_300 = vmemory(kbytes) unlimited notes_plat_sysinfo_305 = locks unlimited notes_plat_sysinfo_310 = rtprio 0 notes_plat_sysinfo_315 = notes_plat_sysinfo_320 = ------------------------------------------------------------ notes_plat_sysinfo_325 = 5. sysinfo process ancestry notes_plat_sysinfo_330 = /sbin/init notes_plat_sysinfo_335 = /bin/login -p -- notes_plat_sysinfo_340 = -bash notes_plat_sysinfo_345 = /bin/bash ./DELL_speed.sh notes_plat_sysinfo_350 = /bin/bash ./dell-run-main.sh speed notes_plat_sysinfo_355 = /bin/bash ./dell-run-main.sh speed notes_plat_sysinfo_360 = /bin/bash ./dell-run-specspeed.sh --output_format csv,html,pdf,txt -define notes_plat_sysinfo_365 = Dell-BIOS-inc=Dell-BIOS_EPYC-4.inc --define Dell-BIOS-LogProcD=1 notes_plat_sysinfo_370 = python3 ./run_amd_speed_aocc400_genoa_B1.py notes_plat_sysinfo_375 = /bin/bash ./amd_speed_aocc400_genoa_B1.sh notes_plat_sysinfo_380 = runcpu --config amd_speed_aocc400_genoa_B1.cfg --tune base --reportable --iterations 2 --output_format notes_plat_sysinfo_385 = csv,html,pdf,txt -define Dell-BIOS-inc=Dell-BIOS_EPYC-4.inc --define Dell-BIOS-LogProcD=1 fpspeed notes_plat_sysinfo_390 = runcpu --configfile amd_speed_aocc400_genoa_B1.cfg --tune base --reportable --iterations 2 --output_format notes_plat_sysinfo_395 = csv,html,pdf,txt --define Dell-BIOS-inc=Dell-BIOS_EPYC-4.inc --define Dell-BIOS-LogProcD=1 --nopower notes_plat_sysinfo_400 = --runmode speed --tune base --size test:train:refspeed fpspeed --nopreenv --note-preenv --logfile notes_plat_sysinfo_405 = $SPEC/tmp/CPU2017.001/templogs/preenv.fpspeed.001.0.log --lognum 001.0 --from_runcpu 2 notes_plat_sysinfo_410 = specperl $SPEC/bin/sysinfo notes_plat_sysinfo_415 = $SPEC = /mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e notes_plat_sysinfo_420 = notes_plat_sysinfo_425 = ------------------------------------------------------------ notes_plat_sysinfo_430 = 6. /proc/cpuinfo notes_plat_sysinfo_435 = model name : AMD EPYC 9634 84-Core Processor notes_plat_sysinfo_440 = vendor_id : AuthenticAMD notes_plat_sysinfo_445 = cpu family : 25 notes_plat_sysinfo_450 = model : 17 notes_plat_sysinfo_455 = stepping : 1 notes_plat_sysinfo_460 = microcode : 0xa101116 notes_plat_sysinfo_465 = bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass notes_plat_sysinfo_470 = TLB size : 3584 4K pages notes_plat_sysinfo_475 = cpu cores : 84 notes_plat_sysinfo_480 = siblings : 84 notes_plat_sysinfo_485 = 2 physical ids (chips) notes_plat_sysinfo_490 = 168 processors (hardware threads) notes_plat_sysinfo_495 = physical id 0: core ids 0-6,16-22,32-38,48-54,64-70,80-86,96-102,112-118,128-134,144-150,160-166,176-182 notes_plat_sysinfo_500 = physical id 1: core ids 0-6,16-22,32-38,48-54,64-70,80-86,96-102,112-118,128-134,144-150,160-166,176-182 notes_plat_sysinfo_505 = physical id 0: apicids 0-6,16-22,32-38,48-54,64-70,80-86,96-102,112-118,128-134,144-150,160-166,176-182 notes_plat_sysinfo_510 = physical id 1: apicids notes_plat_sysinfo_515 = 256-262,272-278,288-294,304-310,320-326,336-342,352-358,368-374,384-390,400-406,416-422,432-438 notes_plat_sysinfo_520 = Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for notes_plat_sysinfo_525 = virtualized systems. Use the above data carefully. notes_plat_sysinfo_530 = notes_plat_sysinfo_535 = ------------------------------------------------------------ notes_plat_sysinfo_540 = 7. lscpu notes_plat_sysinfo_545 = notes_plat_sysinfo_550 = From lscpu from util-linux 2.37.2: notes_plat_sysinfo_555 = Architecture: x86_64 notes_plat_sysinfo_560 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_565 = Address sizes: 52 bits physical, 57 bits virtual notes_plat_sysinfo_570 = Byte Order: Little Endian notes_plat_sysinfo_575 = CPU(s): 168 notes_plat_sysinfo_580 = On-line CPU(s) list: 0-167 notes_plat_sysinfo_585 = Vendor ID: AuthenticAMD notes_plat_sysinfo_590 = Model name: AMD EPYC 9634 84-Core Processor notes_plat_sysinfo_595 = CPU family: 25 notes_plat_sysinfo_600 = Model: 17 notes_plat_sysinfo_605 = Thread(s) per core: 1 notes_plat_sysinfo_610 = Core(s) per socket: 84 notes_plat_sysinfo_615 = Socket(s): 2 notes_plat_sysinfo_620 = Stepping: 1 notes_plat_sysinfo_625 = Frequency boost: enabled notes_plat_sysinfo_630 = CPU max MHz: 3701.0000 notes_plat_sysinfo_635 = CPU min MHz: 400.0000 notes_plat_sysinfo_640 = BogoMIPS: 4501.05 notes_plat_sysinfo_645 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 notes_plat_sysinfo_650 = clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm notes_plat_sysinfo_655 = constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl notes_plat_sysinfo_660 = pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe notes_plat_sysinfo_665 = popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy notes_plat_sysinfo_670 = abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext notes_plat_sysinfo_675 = perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 notes_plat_sysinfo_680 = invpcid_single hw_pstate ssbd mba ibrs ibpb stibp vmmcall fsgsbase bmi1 notes_plat_sysinfo_685 = avx2 smep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap notes_plat_sysinfo_690 = avx512ifma clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt notes_plat_sysinfo_695 = xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local notes_plat_sysinfo_700 = avx512_bf16 clzero irperf xsaveerptr rdpru wbnoinvd amd_ppin cppc arat npt notes_plat_sysinfo_705 = lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists notes_plat_sysinfo_710 = pausefilter pfthreshold avic v_vmsave_vmload vgif v_spec_ctrl avx512vbmi notes_plat_sysinfo_715 = umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg notes_plat_sysinfo_720 = avx512_vpopcntdq la57 rdpid overflow_recov succor smca fsrm flush_l1d notes_plat_sysinfo_725 = Virtualization: AMD-V notes_plat_sysinfo_730 = L1d cache: 5.3 MiB (168 instances) notes_plat_sysinfo_735 = L1i cache: 5.3 MiB (168 instances) notes_plat_sysinfo_740 = L2 cache: 168 MiB (168 instances) notes_plat_sysinfo_745 = L3 cache: 768 MiB (24 instances) notes_plat_sysinfo_750 = NUMA node(s): 24 notes_plat_sysinfo_755 = NUMA node0 CPU(s): 0-6 notes_plat_sysinfo_760 = NUMA node1 CPU(s): 28-34 notes_plat_sysinfo_765 = NUMA node2 CPU(s): 56-62 notes_plat_sysinfo_770 = NUMA node3 CPU(s): 14-20 notes_plat_sysinfo_775 = NUMA node4 CPU(s): 42-48 notes_plat_sysinfo_780 = NUMA node5 CPU(s): 70-76 notes_plat_sysinfo_785 = NUMA node6 CPU(s): 21-27 notes_plat_sysinfo_790 = NUMA node7 CPU(s): 49-55 notes_plat_sysinfo_795 = NUMA node8 CPU(s): 77-83 notes_plat_sysinfo_800 = NUMA node9 CPU(s): 7-13 notes_plat_sysinfo_805 = NUMA node10 CPU(s): 35-41 notes_plat_sysinfo_810 = NUMA node11 CPU(s): 63-69 notes_plat_sysinfo_815 = NUMA node12 CPU(s): 84-90 notes_plat_sysinfo_820 = NUMA node13 CPU(s): 112-118 notes_plat_sysinfo_825 = NUMA node14 CPU(s): 140-146 notes_plat_sysinfo_830 = NUMA node15 CPU(s): 98-104 notes_plat_sysinfo_835 = NUMA node16 CPU(s): 126-132 notes_plat_sysinfo_840 = NUMA node17 CPU(s): 154-160 notes_plat_sysinfo_845 = NUMA node18 CPU(s): 105-111 notes_plat_sysinfo_850 = NUMA node19 CPU(s): 133-139 notes_plat_sysinfo_855 = NUMA node20 CPU(s): 161-167 notes_plat_sysinfo_860 = NUMA node21 CPU(s): 91-97 notes_plat_sysinfo_865 = NUMA node22 CPU(s): 119-125 notes_plat_sysinfo_870 = NUMA node23 CPU(s): 147-153 notes_plat_sysinfo_875 = Vulnerability Itlb multihit: Not affected notes_plat_sysinfo_880 = Vulnerability L1tf: Not affected notes_plat_sysinfo_885 = Vulnerability Mds: Not affected notes_plat_sysinfo_890 = Vulnerability Meltdown: Not affected notes_plat_sysinfo_895 = Vulnerability Mmio stale data: Not affected notes_plat_sysinfo_900 = Vulnerability Retbleed: Not affected notes_plat_sysinfo_905 = Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl and seccomp notes_plat_sysinfo_910 = Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization notes_plat_sysinfo_915 = Vulnerability Spectre v2: Mitigation; Retpolines, IBPB conditional, IBRS_FW, STIBP disabled, RSB notes_plat_sysinfo_920 = filling notes_plat_sysinfo_925 = Vulnerability Srbds: Not affected notes_plat_sysinfo_930 = Vulnerability Tsx async abort: Not affected notes_plat_sysinfo_935 = notes_plat_sysinfo_940 = From lscpu --cache: notes_plat_sysinfo_945 = NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE notes_plat_sysinfo_950 = L1d 32K 5.3M 8 Data 1 64 1 64 notes_plat_sysinfo_955 = L1i 32K 5.3M 8 Instruction 1 64 1 64 notes_plat_sysinfo_960 = L2 1M 168M 8 Unified 2 2048 1 64 notes_plat_sysinfo_965 = L3 32M 768M 16 Unified 3 32768 1 64 notes_plat_sysinfo_970 = notes_plat_sysinfo_975 = ------------------------------------------------------------ notes_plat_sysinfo_980 = 8. numactl --hardware notes_plat_sysinfo_985 = NOTE: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_990 = available: 24 nodes (0-23) notes_plat_sysinfo_995 = node 0 cpus: 0-6 notes_plat_sysinfo_1000= node 0 size: 64056 MB notes_plat_sysinfo_1005= node 0 free: 63825 MB notes_plat_sysinfo_1010= node 1 cpus: 28-34 notes_plat_sysinfo_1015= node 1 size: 64510 MB notes_plat_sysinfo_1020= node 1 free: 64342 MB notes_plat_sysinfo_1025= node 2 cpus: 56-62 notes_plat_sysinfo_1030= node 2 size: 64510 MB notes_plat_sysinfo_1035= node 2 free: 64335 MB notes_plat_sysinfo_1040= node 3 cpus: 14-20 notes_plat_sysinfo_1045= node 3 size: 64510 MB notes_plat_sysinfo_1050= node 3 free: 64321 MB notes_plat_sysinfo_1055= node 4 cpus: 42-48 notes_plat_sysinfo_1060= node 4 size: 64510 MB notes_plat_sysinfo_1065= node 4 free: 64340 MB notes_plat_sysinfo_1070= node 5 cpus: 70-76 notes_plat_sysinfo_1075= node 5 size: 64510 MB notes_plat_sysinfo_1080= node 5 free: 64334 MB notes_plat_sysinfo_1085= node 6 cpus: 21-27 notes_plat_sysinfo_1090= node 6 size: 64510 MB notes_plat_sysinfo_1095= node 6 free: 60697 MB notes_plat_sysinfo_1100= node 7 cpus: 49-55 notes_plat_sysinfo_1105= node 7 size: 64510 MB notes_plat_sysinfo_1110= node 7 free: 64331 MB notes_plat_sysinfo_1115= node 8 cpus: 77-83 notes_plat_sysinfo_1120= node 8 size: 64488 MB notes_plat_sysinfo_1125= node 8 free: 64326 MB notes_plat_sysinfo_1130= node 9 cpus: 7-13 notes_plat_sysinfo_1135= node 9 size: 64510 MB notes_plat_sysinfo_1140= node 9 free: 64338 MB notes_plat_sysinfo_1145= node 10 cpus: 35-41 notes_plat_sysinfo_1150= node 10 size: 64510 MB notes_plat_sysinfo_1155= node 10 free: 64339 MB notes_plat_sysinfo_1160= node 11 cpus: 63-69 notes_plat_sysinfo_1165= node 11 size: 64510 MB notes_plat_sysinfo_1170= node 11 free: 64314 MB notes_plat_sysinfo_1175= node 12 cpus: 84-90 notes_plat_sysinfo_1180= node 12 size: 64510 MB notes_plat_sysinfo_1185= node 12 free: 64398 MB notes_plat_sysinfo_1190= node 13 cpus: 112-118 notes_plat_sysinfo_1195= node 13 size: 64510 MB notes_plat_sysinfo_1200= node 13 free: 64379 MB notes_plat_sysinfo_1205= node 14 cpus: 140-146 notes_plat_sysinfo_1210= node 14 size: 64510 MB notes_plat_sysinfo_1215= node 14 free: 64395 MB notes_plat_sysinfo_1220= node 15 cpus: 98-104 notes_plat_sysinfo_1225= node 15 size: 64474 MB notes_plat_sysinfo_1230= node 15 free: 64341 MB notes_plat_sysinfo_1235= node 16 cpus: 126-132 notes_plat_sysinfo_1240= node 16 size: 64510 MB notes_plat_sysinfo_1245= node 16 free: 64364 MB notes_plat_sysinfo_1250= node 17 cpus: 154-160 notes_plat_sysinfo_1255= node 17 size: 64510 MB notes_plat_sysinfo_1260= node 17 free: 64391 MB notes_plat_sysinfo_1265= node 18 cpus: 105-111 notes_plat_sysinfo_1270= node 18 size: 64510 MB notes_plat_sysinfo_1275= node 18 free: 64362 MB notes_plat_sysinfo_1280= node 19 cpus: 133-139 notes_plat_sysinfo_1285= node 19 size: 64510 MB notes_plat_sysinfo_1290= node 19 free: 64394 MB notes_plat_sysinfo_1295= node 20 cpus: 161-167 notes_plat_sysinfo_1300= node 20 size: 64478 MB notes_plat_sysinfo_1305= node 20 free: 64356 MB notes_plat_sysinfo_1310= node 21 cpus: 91-97 notes_plat_sysinfo_1315= node 21 size: 64510 MB notes_plat_sysinfo_1320= node 21 free: 64387 MB notes_plat_sysinfo_1325= node 22 cpus: 119-125 notes_plat_sysinfo_1330= node 22 size: 64510 MB notes_plat_sysinfo_1335= node 22 free: 64380 MB notes_plat_sysinfo_1340= node 23 cpus: 147-153 notes_plat_sysinfo_1345= node 23 size: 64510 MB notes_plat_sysinfo_1350= node 23 free: 64393 MB notes_plat_sysinfo_1355= node distances: notes_plat_sysinfo_1360= node 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 notes_plat_sysinfo_1365= 0: 10 11 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1370= 1: 11 10 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1375= 2: 11 11 10 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1380= 3: 11 11 11 10 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1385= 4: 11 11 11 11 10 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1390= 5: 11 11 11 11 11 10 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1395= 6: 11 11 11 11 11 11 10 11 11 11 11 11 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1400= 7: 11 11 11 11 11 11 11 10 11 11 11 11 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1405= 8: 11 11 11 11 11 11 11 11 10 11 11 11 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1410= 9: 11 11 11 11 11 11 11 11 11 10 11 11 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1415= 10: 11 11 11 11 11 11 11 11 11 11 10 11 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1420= 11: 11 11 11 11 11 11 11 11 11 11 11 10 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1425= 12: 32 32 32 32 32 32 32 32 32 32 32 32 10 11 11 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1430= 13: 32 32 32 32 32 32 32 32 32 32 32 32 11 10 11 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1435= 14: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 10 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1440= 15: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 10 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1445= 16: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 10 11 11 11 11 11 11 11 notes_plat_sysinfo_1450= 17: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 10 11 11 11 11 11 11 notes_plat_sysinfo_1455= 18: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 10 11 11 11 11 11 notes_plat_sysinfo_1460= 19: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 10 11 11 11 11 notes_plat_sysinfo_1465= 20: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 10 11 11 11 notes_plat_sysinfo_1470= 21: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 10 11 11 notes_plat_sysinfo_1475= 22: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 11 10 11 notes_plat_sysinfo_1480= 23: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 11 11 10 notes_plat_sysinfo_1485= notes_plat_sysinfo_1490= ------------------------------------------------------------ notes_plat_sysinfo_1495= 9. /proc/meminfo notes_plat_sysinfo_1500= MemTotal: 1584845840 kB notes_plat_sysinfo_1505= notes_plat_sysinfo_1510= ------------------------------------------------------------ notes_plat_sysinfo_1515= 10. who -r notes_plat_sysinfo_1520= run-level 3 Mar 9 21:23 notes_plat_sysinfo_1525= notes_plat_sysinfo_1530= ------------------------------------------------------------ notes_plat_sysinfo_1535= 11. Systemd service manager version: systemd 249 (249.11-0ubuntu3.4) notes_plat_sysinfo_1540= Default Target Status notes_plat_sysinfo_1545= multi-user running notes_plat_sysinfo_1550= notes_plat_sysinfo_1555= ------------------------------------------------------------ notes_plat_sysinfo_1560= 12. Services, from systemctl list-unit-files notes_plat_sysinfo_1565= STATE UNIT FILES notes_plat_sysinfo_1570= enabled ModemManager blk-availability cloud-config cloud-final cloud-init cloud-init-local notes_plat_sysinfo_1575= console-setup cron dmesg e2scrub_reap finalrd getty@ grub-common grub-initrd-fallback notes_plat_sysinfo_1580= irqbalance keyboard-setup lm-sensors lvm2-monitor lxd-agent networkd-dispatcher open-iscsi notes_plat_sysinfo_1585= open-vm-tools pollinate rsync rsyslog secureboot-db setvtrgb ssh systemd-networkd notes_plat_sysinfo_1590= systemd-networkd-wait-online systemd-pstore systemd-resolved systemd-timesyncd thermald notes_plat_sysinfo_1595= tuned ua-reboot-cmds ubuntu-advantage udisks2 vgauth notes_plat_sysinfo_1600= enabled-runtime netplan-ovs-cleanup rc-local systemd-remount-fs notes_plat_sysinfo_1605= disabled apparmor console-getty debug-shell iscsid multipathd nftables powertop serial-getty@ notes_plat_sysinfo_1610= smartmontools sysstat systemd-boot-check-no-failures systemd-network-generator notes_plat_sysinfo_1615= systemd-sysext systemd-time-wait-sync ufw upower notes_plat_sysinfo_1620= generated apport notes_plat_sysinfo_1625= indirect uuidd notes_plat_sysinfo_1630= masked accounts-daemon alsa-utils atd cryptdisks cryptdisks-early gpu-manager hwclock lvm2 notes_plat_sysinfo_1635= multipath-tools-boot rc rcS screen-cleanup sudo x11-common notes_plat_sysinfo_1640= notes_plat_sysinfo_1645= ------------------------------------------------------------ notes_plat_sysinfo_1650= 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_1655= BOOT_IMAGE=/vmlinuz-5.15.0-46-generic notes_plat_sysinfo_1660= root=/dev/mapper/ubuntu--vg-ubuntu--lv notes_plat_sysinfo_1665= ro notes_plat_sysinfo_1670= notes_plat_sysinfo_1675= ------------------------------------------------------------ notes_plat_sysinfo_1680= 14. cpupower frequency-info notes_plat_sysinfo_1685= analyzing CPU 0: notes_plat_sysinfo_1690= current policy: frequency should be within 400 MHz and 3.70 GHz. notes_plat_sysinfo_1695= The governor "performance" may decide which speed to use notes_plat_sysinfo_1700= within this range. notes_plat_sysinfo_1705= boost state support: notes_plat_sysinfo_1710= Supported: yes notes_plat_sysinfo_1715= Active: yes notes_plat_sysinfo_1720= Boost States: 0 notes_plat_sysinfo_1725= Total States: 3 notes_plat_sysinfo_1730= Pstate-P0: 2250MHz notes_plat_sysinfo_1735= notes_plat_sysinfo_1740= ------------------------------------------------------------ notes_plat_sysinfo_1745= 15. tuned-adm active notes_plat_sysinfo_1750= Current active profile: latency-performance notes_plat_sysinfo_1755= notes_plat_sysinfo_1760= ------------------------------------------------------------ notes_plat_sysinfo_1765= 16. sysctl notes_plat_sysinfo_1770= kernel.numa_balancing 1 notes_plat_sysinfo_1775= kernel.randomize_va_space 0 notes_plat_sysinfo_1780= vm.compaction_proactiveness 20 notes_plat_sysinfo_1785= vm.dirty_background_bytes 0 notes_plat_sysinfo_1790= vm.dirty_background_ratio 3 notes_plat_sysinfo_1795= vm.dirty_bytes 0 notes_plat_sysinfo_1800= vm.dirty_expire_centisecs 3000 notes_plat_sysinfo_1805= vm.dirty_ratio 8 notes_plat_sysinfo_1810= vm.dirty_writeback_centisecs 500 notes_plat_sysinfo_1815= vm.dirtytime_expire_seconds 43200 notes_plat_sysinfo_1820= vm.extfrag_threshold 500 notes_plat_sysinfo_1825= vm.min_unmapped_ratio 1 notes_plat_sysinfo_1830= vm.nr_hugepages 0 notes_plat_sysinfo_1835= vm.nr_hugepages_mempolicy 0 notes_plat_sysinfo_1840= vm.nr_overcommit_hugepages 0 notes_plat_sysinfo_1845= vm.swappiness 1 notes_plat_sysinfo_1850= vm.watermark_boost_factor 15000 notes_plat_sysinfo_1855= vm.watermark_scale_factor 10 notes_plat_sysinfo_1860= vm.zone_reclaim_mode 1 notes_plat_sysinfo_1865= notes_plat_sysinfo_1870= ------------------------------------------------------------ notes_plat_sysinfo_1875= 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_1880= defrag [always] defer defer+madvise madvise never notes_plat_sysinfo_1885= enabled [always] madvise never notes_plat_sysinfo_1890= hpage_pmd_size 2097152 notes_plat_sysinfo_1895= shmem_enabled always within_size advise [never] deny force notes_plat_sysinfo_1900= notes_plat_sysinfo_1905= ------------------------------------------------------------ notes_plat_sysinfo_1910= 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_1915= alloc_sleep_millisecs 60000 notes_plat_sysinfo_1920= defrag 1 notes_plat_sysinfo_1925= max_ptes_none 511 notes_plat_sysinfo_1930= max_ptes_shared 256 notes_plat_sysinfo_1935= max_ptes_swap 64 notes_plat_sysinfo_1940= pages_to_scan 4096 notes_plat_sysinfo_1945= scan_sleep_millisecs 10000 notes_plat_sysinfo_1950= notes_plat_sysinfo_1955= ------------------------------------------------------------ notes_plat_sysinfo_1960= 19. OS release notes_plat_sysinfo_1965= From /etc/*-release /etc/*-version notes_plat_sysinfo_1970= os-release Ubuntu 22.04.1 LTS notes_plat_sysinfo_1975= notes_plat_sysinfo_1980= ------------------------------------------------------------ notes_plat_sysinfo_1985= 20. Disk information notes_plat_sysinfo_1990= SPEC is set to: /mnt/ramdisk/cpu2017-1.1.9-aocc400-B1e notes_plat_sysinfo_1995= Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_2000= tmpfs tmpfs 125G 3.5G 122G 3% /mnt/ramdisk notes_plat_sysinfo_2005= notes_plat_sysinfo_2010= ------------------------------------------------------------ notes_plat_sysinfo_2015= 21. /sys/devices/virtual/dmi/id notes_plat_sysinfo_2020= Vendor: Dell Inc. notes_plat_sysinfo_2025= Product: PowerEdge R6625 notes_plat_sysinfo_2030= Product Family: PowerEdge notes_plat_sysinfo_2035= Serial: BGP4016 notes_plat_sysinfo_2040= notes_plat_sysinfo_2045= ------------------------------------------------------------ notes_plat_sysinfo_2050= 22. dmidecode notes_plat_sysinfo_2055= Additional information from dmidecode 3.3 follows. WARNING: Use caution when you interpret this section. notes_plat_sysinfo_2060= The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_2065= determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the notes_plat_sysinfo_2070= "DMTF SMBIOS" standard. notes_plat_sysinfo_2075= Memory: notes_plat_sysinfo_2080= 24x 802C0000802C MTC40F2046S1RC48BA1 64 GB 2 rank 4800 notes_plat_sysinfo_2085= notes_plat_sysinfo_2090= notes_plat_sysinfo_2095= ------------------------------------------------------------ notes_plat_sysinfo_2100= 23. BIOS notes_plat_sysinfo_2105= (This section combines info from /sys/devices and dmidecode.) notes_plat_sysinfo_2110= BIOS Vendor: Dell Inc. notes_plat_sysinfo_2115= BIOS Version: 1.3.7 notes_plat_sysinfo_2120= BIOS Date: 03/06/2023 notes_plat_sysinfo_2125= BIOS Revision: 1.3 hw_cpu_name = AMD EPYC 9634 hw_disk = 125 GB add more disk info here hw_nchips = 2 hw_ncores = 168 hw_nthreadspercore = 1 prepared_by = root (is never output, only tags rawfile) sw_file = tmpfs sw_os001 = Ubuntu 22.04.1 LTS sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program