# Invocation command line: # /home/CPU2017/bin/harness/runcpu --configfile amd_rate_aocc300_milan_B2.cfg --reportable --copies 128 --iterations 3 --size ref --tune base --nopower --runmode rate --tune base --size refrate fprate # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 300 SPEC CPU2017 V1.1.5 Rate Configuration File for 64-bit Linux # # File name : amd_rate_aocc300_milan_B2.cfg # Creation Date : April 26, 2021 # CPU2017 Version : 1.1.5 # Supported benchmarks : All Rate benchmarks (intrate, fprate) # Compiler name/version : AOCC 3.0.0 # Operating system version : OpenSUSE 15.2 # Supported OS's : Ubuntu 20.04, RHEL 8.3, SLES 15 SP2 # Hardware : AMD Milan, Rome, Naples (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 32/64-bit # Auto Parallization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_rate_aocc300_milan_B2.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU2017 under optimized conditions on AMD Milan/Rome/Naples-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD Milan/Rome/Naples microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_rate_aocc300_milan_B2.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on two socket AMD # Milan/Rome/Naples-based servers with 64 cores per socket, SMT enabled and 1 TiB of DDR4 # memory distributed evenly among all 16 channels using 32 GiB DIMMs. # # To run the binary package on other Milan/Rome/Naples configurations, please review # "Readme.amd_rate_aocc300_milan_B2.txt". In general, Milan/Rome or Naples CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_rate_aocc300_milan_B2.cfg" or any # other file besides "ini_amd_rate_aocc300_milan_B2.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of rate copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 20.04, RHEL 8.3 and SLES 15 SP2. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Modifiable macros: ################################################################################ # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build true # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc300 %define binary_package_name amd_rate_%{compiler_name}_milan_B %define binary_package_ext amd_rate_%{compiler_name}_milan_A %define binary_package_revision 2 %define build_path /sppo/bin/cpu2017v115aocc3/ %define flags_file_name %{compiler_name}-flags-B2.xml # To enable the platform file, be sure to uncomment the flagsurl02 header line # below. %define platform_file_name INVALID_platform_%{binary_package_name}.xml # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc ################################################################################ # Binary label extension and "allow_build"" switch ################################################################################ # Only modify the binary label extension if you plan to rebuild the binaries. %define ext %{binary_package_ext} # If you plan to recompile these CPU2017 binaries, please choose a new extension # name (ext above) to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true below. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # Necessary to avoid out-of-memory exceptions on certain SUTs: preENV_MALLOC_CONF = retain:true # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib %define build_lib_dir amd_rate_aocc300_milan_A_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib;$[top]/%{lib_dir}/lib32:%{ENV_LD_LIBRARY_PATH} # Define 32-bit library build paths: # Do NOT use $[top] with the 32-bit libraries because doing so will cause an # options checksum error triggering a xalanc recompile attempt on SUTs having # different file paths. # Do NOT change build_lib_dir after the build or it will also trigger a # rebuild of the xalanc: JEMALLOC_LIB32_PATH = %{build_path}%{build_lib_dir}/32 %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib;$[top]/%{build_lib_dir}/lib32:%{ENV_LIBRARY_PATH} % define build_ncpus 64 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/aocc300-flags-B2.2023-02-15.xml flagsurl001 = http://www.spec.org/cpu2017/flags/Inspur-Platform-Settings-amd-V1.7.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak ################################################################################ # Compilers ################################################################################ default: CC = clang -m64 CXX = clang++ -m64 -std=c++98 FC = flang -m64 CLD = clang -m64 CXXLD = clang++ -m64 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default:# data model applies to all benchmarks ################################################################################ # Default Flags ################################################################################ EXTRA_PORTABILITY = -DSPEC_LP64 EXTRA_LIBS = -ljemalloc -lamdlibm -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM OPT_ROOT = -march=znver3 $(VECMATHLIB) OPT_ROOT_BASE = -O3 -ffast-math $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast $(OPT_ROOT) -flto #Ofast enables -ffast-math CROSSPLAT_PORT_OPTS = -mno-adx -mno-sse4a ################################################################################ # Portability Flags ################################################################################ default: # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 500.perlbench_r: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 521.wrf_r: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 523.xalancbmk_r: #lang='CXX' PORTABILITY = -DSPEC_LINUX 526.blender_r: #lang='CXX,C' CPORTABILITY = -funsigned-char CXXPORTABILITY = -D__BOOL_DEFINED 527.cam4_r: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) -flto -fstruct-layout=5 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 -fremap-arrays -mllvm \ -function-specialize -flv-function-specialization \ -mllvm -enable-gvn-hoist -mllvm \ -global-vectorize-slp=true -mllvm -enable-licm-vrp \ -mllvm -reduce-array-computations=3 \ -Wno-unused-command-line-argument CXXOPTIMIZE = $(OPT_ROOT_BASE) -flto -mllvm -enable-partial-unswitch \ -mllvm -unroll-threshold=100\ -finline-aggressive -flv-function-specialization \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reroll-loops -mllvm -aggressive-loop-unswitch\ -mllvm -extra-vectorizer-passes -mllvm \ -reduce-array-computations=3 -mllvm \ -global-vectorize-slp=true \ -Wno-unused-command-line-argument \ -mllvm -convert-pow-exp-to-int=false FOPTIMIZE = -Hz,1,0x1 $(OPT_ROOT_BASE) -Kieee -Mrecursive \ -mllvm -fuse-tile-inner-loop -funroll-loops \ -mllvm -extra-vectorizer-passes -mllvm \ -lsr-in-nested-loop -mllvm -enable-licm-vrp -mllvm \ -reduce-array-computations=3 -mllvm \ -global-vectorize-slp=true \ -Wno-unused-command-line-argument LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LDFLAGS = -flto -Wl,-mllvm -Wl,-region-vectorize \ -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching \ -Wl,-mllvm -Wl,-enable-licm-vrp EXTRA_LIBS = -lamdlibm -lm -ljemalloc -lflang -lflangrti EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATH_LIBS because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATH_LIBS. MATH_LIBS = # The following is necessary for 502/602 gcc: LDOPTIMIZE = -z muldefs ######################## # intrate tuning flags # ######################## intrate: FOPTIMIZE = $(OPT_ROOT_BASE) -flto #EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=500 #EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ EXTRA_CXXFLAGS = -fvirtual-function-elimination -fvisibility=hidden LDCFLAGS = -Wl,-allow-multiple-definition -Wl,-mllvm \ -Wl,-enable-licm-vrp #LDCXXFLAGS = -Wl,-mllvm -Wl,-do-block-reorder=aggressive LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split ######################## # fprate tuning flags # ######################## fprate: CXX = clang++ -m64 -std=c++98 $[CROSSPLAT_PORT_OPTS] ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=7 \ -mllvm -unroll-threshold=50 -fremap-arrays \ -flv-function-specialization -mllvm \ -inline-threshold=1000 -mllvm -enable-gvn-hoist \ -mllvm -global-vectorize-slp=true -mllvm \ -function-specialize -mllvm -enable-licm-vrp \ -mllvm -reduce-array-computations=3 \ -Wno-unused-command-line-argument CXXOPTIMIZE = $(OPT_ROOT_PEAK) -finline-aggressive \ -mllvm -unroll-threshold=100 \ -flv-function-specialization -mllvm -enable-licm-vrp\ -mllvm -reroll-loops -mllvm \ -aggressive-loop-unswitch -mllvm \ -reduce-array-computations=3 -mllvm \ -global-vectorize-slp=true \ -Wno-unused-command-line-argument FOPTIMIZE = $(OPT_ROOT_PEAK) -Kieee -Mrecursive \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -mllvm -enable-licm-vrp \ -Wno-unused-command-line-argument EXTRA_LDFLAGS = -flto -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching \ -Wl,-mllvm -Wl,-enable-licm-vrp LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false \ -Wl,-mllvm -Wl,-enable-licm-vrp feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw #libraries: EXTRA_LIBS = -lamdlibm -lm -ljemalloc EXTRA_FLIBS = -lflang -lflangrti # Benchmark specific peak tuning flags: 500.perlbench_r=peak: #lang='C' COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=7 \ -mllvm -unroll-threshold=50 -fremap-arrays \ -flv-function-specialization -mllvm \ -inline-threshold=1000 -mllvm -enable-gvn-hoist \ -mllvm -global-vectorize-slp=false \ -mllvm -function-specialize -mllvm -enable-licm-vrp\ -mllvm -reduce-array-computations=3 \ -Wno-unused-command-line-argument feedback = 1 502.gcc_r=peak: #lang='C' EXTRA_PORTABILITY = -D_FILE_OFFSET_BITS=64 EXTRA_COPTIMIZE = -fgnu89-inline CC = clang -m32 CLD = clang -m32 -L/usr/lib EXTRA_LIBS = -L$[JEMALLOC_LIB32_PATH] -ljemalloc MATHLIBOPT = -lm EXTRA_LDFLAGS = -flto -Wl,-mllvm -Wl,-function-specialize 507.cactuBSSN_r=peak: CXXOPTIMIZE = $(OPT_ROOT_PEAK) \ -mllvm -unroll-threshold=100 \ -flv-function-specialization \ -mllvm -loop-unswitch-threshold=200000 \ -finline-aggressive -mllvm -reroll-loops \ -mllvm -aggressive-loop-unswitch \ -mllvm -reduce-array-computations=3 \ -mllvm -extra-vectorizer-passes \ -mllvm -convert-pow-exp-to-int=false EXTRA_LIBS += $(EXTRA_FLIBS) #adding flang libs to cxx linker 510.parest_r=peak: EXTRA_LDFLAGS = -flto -Wl,-mllvm -Wl,-suppress-fmas \ -Wl,-mllvm -Wl,-function-specialize 523.xalancbmk_r=peak: #lang='CXX` EXTRA_PORTABILITY = -DSPEC_LP64 CXX = clang++ -m32 CXXLD = clang++ -m32 -L/usr/lib EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden LDCXXFLAGS = -Wl,-mllvm -Wl,-do-block-reorder=aggressive EXTRA_LIBS = -L$[JEMALLOC_LIB32_PATH] -ljemalloc ENV_MALLOC_CONF = thp:never 525.x264_r=peak: #lang='C' basepeak=yes 527.cam4_r=peak: FOPTIMIZE = $(OPT_ROOT_BASE) -ffast-math -funroll-loops \ -mllvm -extra-vectorizer-passes \ -mllvm -lsr-in-nested-loop -Mrecursive EXTRA_LDFLAGS = -flto -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-force-vector-interleave=1 544.nab_r=peak: EXTRA_LDFLAGS = -flto -Wl,-mllvm -Wl,-region-vectorize \ -Wl,-mllvm -Wl,-function-specialize 554.roms_r=peak: EXTRA_FFLAGS = -Hz,1,0x1 -mllvm -fuse-tile-inner-loop # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:2eb381fc1a58eb8122e4a1b875c1e38b3489dac84088192aa0ec6d157b084d06) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /home/CPU2017/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197 notes_plat_sysinfo_015 = running on localhost.localdomain Fri Jan 10 18:55:25 2020 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = notes_plat_sysinfo_035 = ------------------------------------------------------------ notes_plat_sysinfo_040 = Table of contents notes_plat_sysinfo_045 = ------------------------------------------------------------ notes_plat_sysinfo_050 = 1. uname -a notes_plat_sysinfo_055 = 2. w notes_plat_sysinfo_060 = 3. Username notes_plat_sysinfo_065 = 4. ulimit -a notes_plat_sysinfo_070 = 5. sysinfo process ancestry notes_plat_sysinfo_075 = 6. /proc/cpuinfo notes_plat_sysinfo_080 = 7. lscpu notes_plat_sysinfo_085 = 8. numactl --hardware notes_plat_sysinfo_090 = 9. /proc/meminfo notes_plat_sysinfo_095 = 10. who -r notes_plat_sysinfo_100 = 11. Systemd service manager version: systemd 239 (239-40.el8) notes_plat_sysinfo_105 = 12. Services, from systemctl list-unit-files notes_plat_sysinfo_110 = 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_115 = 14. cpupower frequency-info notes_plat_sysinfo_120 = 15. tuned-adm active notes_plat_sysinfo_125 = 16. sysctl notes_plat_sysinfo_130 = 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_135 = 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_140 = 19. OS release notes_plat_sysinfo_145 = 20. Kernel self-reported vulnerability status, from /sys/devices/system/cpu/vulnerabilities notes_plat_sysinfo_150 = 21. Disk information notes_plat_sysinfo_155 = 22. /sys/devices/virtual/dmi/id notes_plat_sysinfo_160 = 23. dmidecode notes_plat_sysinfo_165 = 24. BIOS notes_plat_sysinfo_170 = ------------------------------------------------------------ notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = ------------------------------------------------------------ notes_plat_sysinfo_185 = 1. uname -a notes_plat_sysinfo_190 = Linux localhost.localdomain 4.18.0-240.el8.x86_64 #1 SMP Wed Sep 23 05:13:10 EDT 2020 x86_64 x86_64 x86_64 notes_plat_sysinfo_195 = GNU/Linux notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = ------------------------------------------------------------ notes_plat_sysinfo_210 = 2. w notes_plat_sysinfo_215 = 18:55:25 up 1 day, 59 min, 2 users, load average: 0.00, 0.00, 0.00 notes_plat_sysinfo_220 = USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT notes_plat_sysinfo_225 = root tty2 - Thu17 16.00s 1.09s 0.00s sh runfp.sh notes_plat_sysinfo_230 = root tty3 - Thu18 24:37m 0.02s 0.02s -bash notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = ------------------------------------------------------------ notes_plat_sysinfo_245 = 3. Username notes_plat_sysinfo_250 = From environment variable $USER: root notes_plat_sysinfo_255 = notes_plat_sysinfo_260 = ------------------------------------------------------------ notes_plat_sysinfo_265 = 4. ulimit -a notes_plat_sysinfo_270 = core file size (blocks, -c) 0 notes_plat_sysinfo_275 = data seg size (kbytes, -d) unlimited notes_plat_sysinfo_280 = scheduling priority (-e) 0 notes_plat_sysinfo_285 = file size (blocks, -f) unlimited notes_plat_sysinfo_290 = pending signals (-i) 8255571 notes_plat_sysinfo_295 = max locked memory (kbytes, -l) 64 notes_plat_sysinfo_300 = max memory size (kbytes, -m) unlimited notes_plat_sysinfo_305 = open files (-n) 1024 notes_plat_sysinfo_310 = pipe size (512 bytes, -p) 8 notes_plat_sysinfo_315 = POSIX message queues (bytes, -q) 819200 notes_plat_sysinfo_320 = real-time priority (-r) 0 notes_plat_sysinfo_325 = stack size (kbytes, -s) unlimited notes_plat_sysinfo_330 = cpu time (seconds, -t) unlimited notes_plat_sysinfo_335 = max user processes (-u) 8255571 notes_plat_sysinfo_340 = virtual memory (kbytes, -v) unlimited notes_plat_sysinfo_345 = file locks (-x) unlimited notes_plat_sysinfo_350 = notes_plat_sysinfo_355 = ------------------------------------------------------------ notes_plat_sysinfo_360 = 5. sysinfo process ancestry notes_plat_sysinfo_365 = /usr/lib/systemd/systemd --switched-root --system --deserialize 17 notes_plat_sysinfo_370 = login -- root notes_plat_sysinfo_375 = -bash notes_plat_sysinfo_380 = sh runfp.sh notes_plat_sysinfo_385 = runcpu --config amd_rate_aocc300_milan_B2.cfg --reportable --copies=128 --iterations 3 --size=ref notes_plat_sysinfo_390 = --tune=base fprate notes_plat_sysinfo_395 = runcpu --configfile amd_rate_aocc300_milan_B2.cfg --reportable --copies 128 --iterations 3 --size ref --tune notes_plat_sysinfo_400 = base --nopower --runmode rate --tune base --size refrate fprate --nopreenv --note-preenv --logfile notes_plat_sysinfo_405 = $SPEC/tmp/CPU2017.019/templogs/preenv.fprate.019.0.log --lognum 019.0 --from_runcpu 2 notes_plat_sysinfo_410 = specperl $SPEC/bin/sysinfo notes_plat_sysinfo_415 = $SPEC = /home/CPU2017 notes_plat_sysinfo_420 = notes_plat_sysinfo_425 = ------------------------------------------------------------ notes_plat_sysinfo_430 = 6. /proc/cpuinfo notes_plat_sysinfo_435 = model name : AMD EPYC 7513 32-Core Processor notes_plat_sysinfo_440 = vendor_id : AuthenticAMD notes_plat_sysinfo_445 = cpu family : 25 notes_plat_sysinfo_450 = model : 1 notes_plat_sysinfo_455 = stepping : 1 notes_plat_sysinfo_460 = microcode : 0xa001173 notes_plat_sysinfo_465 = bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass notes_plat_sysinfo_470 = TLB size : 2560 4K pages notes_plat_sysinfo_475 = cpu cores : 32 notes_plat_sysinfo_480 = siblings : 64 notes_plat_sysinfo_485 = 2 physical ids (chips) notes_plat_sysinfo_490 = 128 processors (hardware threads) notes_plat_sysinfo_495 = physical id 0: core ids 0-31 notes_plat_sysinfo_500 = physical id 1: core ids 0-31 notes_plat_sysinfo_505 = physical id 0: apicids 0-63 notes_plat_sysinfo_510 = physical id 1: apicids 64-127 notes_plat_sysinfo_515 = Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for notes_plat_sysinfo_520 = virtualized systems. Use the above data carefully. notes_plat_sysinfo_525 = notes_plat_sysinfo_530 = ------------------------------------------------------------ notes_plat_sysinfo_535 = 7. lscpu notes_plat_sysinfo_540 = notes_plat_sysinfo_545 = From lscpu from util-linux 2.32.1: notes_plat_sysinfo_550 = Architecture: x86_64 notes_plat_sysinfo_555 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_560 = Byte Order: Little Endian notes_plat_sysinfo_565 = CPU(s): 128 notes_plat_sysinfo_570 = On-line CPU(s) list: 0-127 notes_plat_sysinfo_575 = Thread(s) per core: 2 notes_plat_sysinfo_580 = Core(s) per socket: 32 notes_plat_sysinfo_585 = Socket(s): 2 notes_plat_sysinfo_590 = NUMA node(s): 8 notes_plat_sysinfo_595 = Vendor ID: AuthenticAMD notes_plat_sysinfo_600 = CPU family: 25 notes_plat_sysinfo_605 = Model: 1 notes_plat_sysinfo_610 = Model name: AMD EPYC 7513 32-Core Processor notes_plat_sysinfo_615 = Stepping: 1 notes_plat_sysinfo_620 = CPU MHz: 2616.201 notes_plat_sysinfo_625 = CPU max MHz: 2600.0000 notes_plat_sysinfo_630 = CPU min MHz: 1500.0000 notes_plat_sysinfo_635 = BogoMIPS: 5190.13 notes_plat_sysinfo_640 = Virtualization: AMD-V notes_plat_sysinfo_645 = L1d cache: 32K notes_plat_sysinfo_650 = L1i cache: 32K notes_plat_sysinfo_655 = L2 cache: 512K notes_plat_sysinfo_660 = L3 cache: 32768K notes_plat_sysinfo_665 = NUMA node0 CPU(s): 0-7,64-71 notes_plat_sysinfo_670 = NUMA node1 CPU(s): 8-15,72-79 notes_plat_sysinfo_675 = NUMA node2 CPU(s): 16-23,80-87 notes_plat_sysinfo_680 = NUMA node3 CPU(s): 24-31,88-95 notes_plat_sysinfo_685 = NUMA node4 CPU(s): 32-39,96-103 notes_plat_sysinfo_690 = NUMA node5 CPU(s): 40-47,104-111 notes_plat_sysinfo_695 = NUMA node6 CPU(s): 48-55,112-119 notes_plat_sysinfo_700 = NUMA node7 CPU(s): 56-63,120-127 notes_plat_sysinfo_705 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx notes_plat_sysinfo_710 = fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good notes_plat_sysinfo_715 = nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq ssse3 fma cx16 pcid sse4_1 notes_plat_sysinfo_720 = sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic notes_plat_sysinfo_725 = cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext notes_plat_sysinfo_730 = perfctr_core perfctr_nb bpext perfctr_llc cpb cat_l3 cdp_l3 invpcid_single hw_pstate notes_plat_sysinfo_735 = sme ssbd mba sev ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 invpcid cqm notes_plat_sysinfo_740 = rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves cqm_llc notes_plat_sysinfo_745 = cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr wbnoinvd amd_ppin notes_plat_sysinfo_750 = arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists notes_plat_sysinfo_755 = pausefilter pfthreshold v_vmsave_vmload vgif umip pku ospke vaes vpclmulqdq rdpid notes_plat_sysinfo_760 = overflow_recov succor smca notes_plat_sysinfo_765 = notes_plat_sysinfo_770 = ------------------------------------------------------------ notes_plat_sysinfo_775 = 8. numactl --hardware notes_plat_sysinfo_780 = NOTE: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_785 = available: 8 nodes (0-7) notes_plat_sysinfo_790 = node 0 cpus: 0-7,64-71 notes_plat_sysinfo_795 = node 0 size: 257691 MB notes_plat_sysinfo_800 = node 0 free: 256211 MB notes_plat_sysinfo_805 = node 1 cpus: 8-15,72-79 notes_plat_sysinfo_810 = node 1 size: 257887 MB notes_plat_sysinfo_815 = node 1 free: 256162 MB notes_plat_sysinfo_820 = node 2 cpus: 16-23,80-87 notes_plat_sysinfo_825 = node 2 size: 257919 MB notes_plat_sysinfo_830 = node 2 free: 255703 MB notes_plat_sysinfo_835 = node 3 cpus: 24-31,88-95 notes_plat_sysinfo_840 = node 3 size: 257915 MB notes_plat_sysinfo_845 = node 3 free: 256353 MB notes_plat_sysinfo_850 = node 4 cpus: 32-39,96-103 notes_plat_sysinfo_855 = node 4 size: 257921 MB notes_plat_sysinfo_860 = node 4 free: 256777 MB notes_plat_sysinfo_865 = node 5 cpus: 40-47,104-111 notes_plat_sysinfo_870 = node 5 size: 257911 MB notes_plat_sysinfo_875 = node 5 free: 256730 MB notes_plat_sysinfo_880 = node 6 cpus: 48-55,112-119 notes_plat_sysinfo_885 = node 6 size: 257957 MB notes_plat_sysinfo_890 = node 6 free: 256772 MB notes_plat_sysinfo_895 = node 7 cpus: 56-63,120-127 notes_plat_sysinfo_900 = node 7 size: 257909 MB notes_plat_sysinfo_905 = node 7 free: 256714 MB notes_plat_sysinfo_910 = node distances: notes_plat_sysinfo_915 = node 0 1 2 3 4 5 6 7 notes_plat_sysinfo_920 = 0: 10 12 12 12 32 32 32 32 notes_plat_sysinfo_925 = 1: 12 10 12 12 32 32 32 32 notes_plat_sysinfo_930 = 2: 12 12 10 12 32 32 32 32 notes_plat_sysinfo_935 = 3: 12 12 12 10 32 32 32 32 notes_plat_sysinfo_940 = 4: 32 32 32 32 10 12 12 12 notes_plat_sysinfo_945 = 5: 32 32 32 32 12 10 12 12 notes_plat_sysinfo_950 = 6: 32 32 32 32 12 12 10 12 notes_plat_sysinfo_955 = 7: 32 32 32 32 12 12 12 10 notes_plat_sysinfo_960 = notes_plat_sysinfo_965 = ------------------------------------------------------------ notes_plat_sysinfo_970 = 9. /proc/meminfo notes_plat_sysinfo_975 = MemTotal: 2113617132 kB notes_plat_sysinfo_980 = notes_plat_sysinfo_985 = ------------------------------------------------------------ notes_plat_sysinfo_990 = 10. who -r notes_plat_sysinfo_995 = run-level 3 Jan 9 17:56 notes_plat_sysinfo_1000= notes_plat_sysinfo_1005= ------------------------------------------------------------ notes_plat_sysinfo_1010= 11. Systemd service manager version: systemd 239 (239-40.el8) notes_plat_sysinfo_1015= Default Target Status notes_plat_sysinfo_1020= multi-user running notes_plat_sysinfo_1025= notes_plat_sysinfo_1030= ------------------------------------------------------------ notes_plat_sysinfo_1035= 12. Services, from systemctl list-unit-files notes_plat_sysinfo_1040= STATE UNIT FILES notes_plat_sysinfo_1045= enabled tuned notes_plat_sysinfo_1050= disabled NetworkManager NetworkManager-dispatcher NetworkManager-wait-online auditd autovt@ notes_plat_sysinfo_1055= blk-availability chrony-wait chronyd console-getty cpupower crond dbxtool debug-shell ebtables notes_plat_sysinfo_1060= firewalld getty@ import-state iprdump iprinit iprupdate irqbalance kdump loadmodules lvm2-monitor notes_plat_sysinfo_1065= microcode nftables nis-domainname rdisc rhsm rhsm-facts rhsmcertd rngd rngd-wake-threshold notes_plat_sysinfo_1070= rsyslog selinux-autorelabel-mark serial-getty@ sshd sshd-keygen@ sssd systemd-resolved tcsd notes_plat_sysinfo_1075= timedatex notes_plat_sysinfo_1080= indirect sssd-autofs sssd-kcm sssd-nss sssd-pac sssd-pam sssd-ssh sssd-sudo notes_plat_sysinfo_1085= masked systemd-timedated notes_plat_sysinfo_1090= notes_plat_sysinfo_1095= ------------------------------------------------------------ notes_plat_sysinfo_1100= 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_1105= BOOT_IMAGE=(hd0,gpt2)/vmlinuz-4.18.0-240.el8.x86_64 notes_plat_sysinfo_1110= root=/dev/mapper/rhel-root notes_plat_sysinfo_1115= ro notes_plat_sysinfo_1120= resume=/dev/mapper/rhel-swap notes_plat_sysinfo_1125= rd.lvm.lv=rhel/root notes_plat_sysinfo_1130= rd.lvm.lv=rhel/swap notes_plat_sysinfo_1135= rhgb notes_plat_sysinfo_1140= quiet notes_plat_sysinfo_1145= notes_plat_sysinfo_1150= ------------------------------------------------------------ notes_plat_sysinfo_1155= 14. cpupower frequency-info notes_plat_sysinfo_1160= analyzing CPU 0: notes_plat_sysinfo_1165= current policy: frequency should be within 1.50 GHz and 2.60 GHz. notes_plat_sysinfo_1170= The governor "performance" may decide which speed to use notes_plat_sysinfo_1175= within this range. notes_plat_sysinfo_1180= boost state support: notes_plat_sysinfo_1185= Supported: yes notes_plat_sysinfo_1190= Active: no notes_plat_sysinfo_1195= Boost States: 0 notes_plat_sysinfo_1200= Total States: 3 notes_plat_sysinfo_1205= Pstate-P0: 2800MHz notes_plat_sysinfo_1210= notes_plat_sysinfo_1215= ------------------------------------------------------------ notes_plat_sysinfo_1220= 15. tuned-adm active notes_plat_sysinfo_1225= Current active profile: throughput-performance notes_plat_sysinfo_1230= notes_plat_sysinfo_1235= ------------------------------------------------------------ notes_plat_sysinfo_1240= 16. sysctl notes_plat_sysinfo_1245= kernel.numa_balancing 1 notes_plat_sysinfo_1250= kernel.randomize_va_space 0 notes_plat_sysinfo_1255= vm.dirty_background_bytes 0 notes_plat_sysinfo_1260= vm.dirty_background_ratio 10 notes_plat_sysinfo_1265= vm.dirty_bytes 0 notes_plat_sysinfo_1270= vm.dirty_expire_centisecs 3000 notes_plat_sysinfo_1275= vm.dirty_ratio 40 notes_plat_sysinfo_1280= vm.dirty_writeback_centisecs 500 notes_plat_sysinfo_1285= vm.dirtytime_expire_seconds 43200 notes_plat_sysinfo_1290= vm.extfrag_threshold 500 notes_plat_sysinfo_1295= vm.min_unmapped_ratio 1 notes_plat_sysinfo_1300= vm.nr_hugepages 0 notes_plat_sysinfo_1305= vm.nr_hugepages_mempolicy 0 notes_plat_sysinfo_1310= vm.nr_overcommit_hugepages 0 notes_plat_sysinfo_1315= vm.swappiness 10 notes_plat_sysinfo_1320= vm.watermark_scale_factor 10 notes_plat_sysinfo_1325= vm.zone_reclaim_mode 0 notes_plat_sysinfo_1330= notes_plat_sysinfo_1335= ------------------------------------------------------------ notes_plat_sysinfo_1340= 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_1345= defrag always defer defer+madvise [madvise] never notes_plat_sysinfo_1350= enabled [always] madvise never notes_plat_sysinfo_1355= hpage_pmd_size 2097152 notes_plat_sysinfo_1360= shmem_enabled always within_size advise [never] deny force notes_plat_sysinfo_1365= notes_plat_sysinfo_1370= ------------------------------------------------------------ notes_plat_sysinfo_1375= 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_1380= alloc_sleep_millisecs 60000 notes_plat_sysinfo_1385= defrag 1 notes_plat_sysinfo_1390= max_ptes_none 511 notes_plat_sysinfo_1395= max_ptes_swap 64 notes_plat_sysinfo_1400= pages_to_scan 4096 notes_plat_sysinfo_1405= scan_sleep_millisecs 10000 notes_plat_sysinfo_1410= notes_plat_sysinfo_1415= ------------------------------------------------------------ notes_plat_sysinfo_1420= 19. OS release notes_plat_sysinfo_1425= From /etc/*-release /etc/*-version notes_plat_sysinfo_1430= os-release Red Hat Enterprise Linux 8.3 (Ootpa) notes_plat_sysinfo_1435= redhat-release Red Hat Enterprise Linux release 8.3 (Ootpa) notes_plat_sysinfo_1440= system-release Red Hat Enterprise Linux release 8.3 (Ootpa) notes_plat_sysinfo_1445= notes_plat_sysinfo_1450= ------------------------------------------------------------ notes_plat_sysinfo_1455= 20. Kernel self-reported vulnerability status, from /sys/devices/system/cpu/vulnerabilities notes_plat_sysinfo_1460= itlb_multihit Not affected notes_plat_sysinfo_1465= l1tf Not affected notes_plat_sysinfo_1470= mds Not affected notes_plat_sysinfo_1475= meltdown Not affected notes_plat_sysinfo_1480= spec_store_bypass Mitigation: Speculative Store Bypass disabled via prctl and seccomp notes_plat_sysinfo_1485= spectre_v1 Mitigation: usercopy/swapgs barriers and __user pointer sanitization notes_plat_sysinfo_1490= spectre_v2 Mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, STIBP: always-on, RSB notes_plat_sysinfo_1495= filling notes_plat_sysinfo_1500= srbds Not affected notes_plat_sysinfo_1505= tsx_async_abort Not affected notes_plat_sysinfo_1510= For more information, see the Linux documentation on hardware vulnerabilities, for example notes_plat_sysinfo_1515= https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/index.html notes_plat_sysinfo_1520= notes_plat_sysinfo_1525= ------------------------------------------------------------ notes_plat_sysinfo_1530= 21. Disk information notes_plat_sysinfo_1535= SPEC is set to: /home/CPU2017 notes_plat_sysinfo_1540= Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_1545= /dev/mapper/rhel-home xfs 372G 20G 353G 6% /home notes_plat_sysinfo_1550= notes_plat_sysinfo_1555= ------------------------------------------------------------ notes_plat_sysinfo_1560= 22. /sys/devices/virtual/dmi/id notes_plat_sysinfo_1565= Vendor: Inspur notes_plat_sysinfo_1570= Product: NF5280A6 notes_plat_sysinfo_1575= Product Family: Not specified notes_plat_sysinfo_1580= Serial: 200857231 notes_plat_sysinfo_1585= notes_plat_sysinfo_1590= ------------------------------------------------------------ notes_plat_sysinfo_1595= 23. dmidecode notes_plat_sysinfo_1600= Additional information from dmidecode 3.2 follows. WARNING: Use caution when you interpret this section. notes_plat_sysinfo_1605= The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_1610= determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the notes_plat_sysinfo_1615= "DMTF SMBIOS" standard. notes_plat_sysinfo_1620= Memory: notes_plat_sysinfo_1625= 16x Samsung M393AAG40M32-CAE 128 GB 4 rank 3200 notes_plat_sysinfo_1630= 16x Unknown Unknown notes_plat_sysinfo_1635= notes_plat_sysinfo_1640= notes_plat_sysinfo_1645= ------------------------------------------------------------ notes_plat_sysinfo_1650= 24. BIOS notes_plat_sysinfo_1655= (This section combines info from /sys/devices and dmidecode.) notes_plat_sysinfo_1660= BIOS Vendor: American Megatrends Inc. notes_plat_sysinfo_1665= BIOS Version: 4.00.26 notes_plat_sysinfo_1670= BIOS Date: 09/07/2022 hw_cpu_name = AMD EPYC 7513 hw_cpu_max_mhz = 3650 hw_cpu_nominal_mhz = 2600 hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 512 KB I+D on chip per core hw_disk = 1 x 480 GB SATA SSD hw_other = None hw_ocache = None hw_memory = 2 TB (16 x 128 GB 4Rx4 PC4-3200AA-L) hw_nchips = 2 hw_ncores = 64 hw_nthreadspercore = 2 test_sponsor = Inspur Corporation license_num = 3358 tester = Inspur Corporation hw_avail = Mar-2021 sw_avail = Mar-2021 prepared_by = Inspur Corporation hw_vendor = Inspur Corporation hw_model = Inspur NF5280A6 (AMD EPYC 7513) sw_compiler = C/C++/Fortran: Version 3.0.0 of AOCC fw_bios = Version 4.00.26 released Sep-2022 sw_file = xfs sw_os000 = Red Hat Enterprise Linux 8.3 (Ootpa) sw_os001 = 4.18.0-240.el8.x86_64 sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit # End of settings added by sysinfo_program # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: sw_peak_ptrsize = Not Applicable sw_other = jemalloc: jemalloc memory allocator library v5.1.0 hw_tcache000 = 128 MB I+D on chip per chip, 32 MB shared / 8 hw_tcache001 = cores power_management000 = BIOS and OS set to prefer performance at the cost power_management001 = of additional power usage. notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_000 =Binaries were compiled on a system with 2x AMD EPYC 7742 CPU + 1TiB Memory using OpenSUSE 15.2 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 = notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) notes_jemalloc_005 =jemalloc 5.1.0 is available here: notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 notes_jemalloc_015 = notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_035 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_040 =To free node-local memory and avoid remote memory usage, notes_os_045 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_050 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_055 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_060 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. notes_os_065 = notes_os_070 =Scaling_Governor set to Performance notes_os_075 = notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_os_thp_015 = notes_plat_form_000 = BIOS configuration: notes_plat_form_005 = SVM Mode set to disable notes_plat_form_010 = DRAM Scrub time set to disable notes_plat_form_015 = NUMA nodes per socket set to NPS4 notes_plat_form_020 = APBDIS set to 1