# Invocation command line: # /mnt/ramdisk/cpu2017-1.1.8-aocc400-B1b/bin/harness/runcpu --configfile amd_speed_aocc400_genoa_B1.cfg --tune base --reportable --iterations 2 --iterations 2 --output_format csv,html,pdf,txt --define Dell-BIOS-inc=Dell-BIOS_EPYC-4.inc --nopower --runmode speed --tune base --size test:train:refspeed fpspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 400 SPEC CPU 2017 V1.1.8 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc400_genoa_B1.cfg # Creation Date : October 6, 2022 # CPU 2017 Version : 1.1.8 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC 4.0.0 # Operating system version : RHEL 8.6 # Supported OS's : Ubuntu 22.04, RHEL 8.6/9, SLE 15 SP4 # Hardware : AMD Genoa (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 64-bit # Auto Parallelization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc400_genoa_B1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU 2017 under optimized conditions on AMD Genoa-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD Genoa microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc400_genoa_B1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on one socket AMD # Genoa-based servers with 96 cores, SMT enabled and 768 (64x12) GB of DDR5 # memory distributed evenly among all 12 channels using 64 GiB DIMMs. # # To run the binary package on other Genoa configurations, please review # "Readme.amd_speed_aocc400_genoa_B1.txt". In general, Genoa CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc400_genoa_B1.cfg" or any # other file besides "ini_amd_speed_aocc400_genoa_B1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 22.04, RHEL 8.6/9, and SLE 15 SP4. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Modifiable macros: ################################################################################ # "allow_build"" switch: # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc400 %define binary_package_name amd_speed_%{compiler_name}_genoa_B %define binary_package_ext %{binary_package_name} %define binary_package_revision 1 %define build_path ${SPEC} %define flags_file_name %{compiler_name}-flags.xml # Do NOT change build_lib_dir after the build or it will trigger a # rebuild of the xalanc. It should also remain literal: %define build_lib_dir amd_speed_aocc400_genoa_B_lib # To enable the platform file, be sure to uncomment the flagsurl02 header line # below in the Header settings. %define platform_file_name INVALID_platform_%{binary_package_name}.xml ################################################################################ # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc %define flags_inc_file_name %{binary_package_full_name}_flags.inc # Binary label extension: # Only modify the binary label extension if you plan to rebuild the binaries. # If you plan to recompile these CPU 2017 binaries, please choose a new extension # name below to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true above. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Note that AMD calls an external script to set up the compiler and library # paths before initiating the build. %define ext %{binary_package_ext} ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # retain:true is necessary to avoid gcc out-of-memory exceptions on certain SUTs: # oversize_threshold is required to support jemalloc 5.2.x+ preENV_MALLOC_CONF = oversize_threshold:0,retain:true preENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 0 # OpenMP environment variables: preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false preENV_OMP_STACKSIZE = 128M # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib:%{ENV_LD_LIBRARY_PATH} %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_genoa_B1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc400_genoa_B1.inc # File generation code date: October 11, 2022 # File generation date/time: December 15, 2022 / 00:05:02 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 192 %define physical_core_count 192 %define physical_core_max 191 %define logical_core_max 191 ################################################################################ ################################################################################ # The following inc blocks set the speed thread counts and affinity settings. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # # Selected thread counts from '9654' section of CPU info ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 192 preENV_GOMP_CPU_AFFINITY = 0-191 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 192 ENV_GOMP_CPU_AFFINITY = 0-191 bind0 = numactl --physcpubind=0-191 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 192 ENV_GOMP_CPU_AFFINITY = 0-191 bind0 = numactl --physcpubind=0-191 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 1 bind0 = numactl --physcpubind=1 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 192 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s,627.cam4_s,628.pop2_s,638.imagick_s,649.fotonik3d_s,654.roms_s,657.xz_s=peak: threads = 192 ENV_GOMP_CPU_AFFINITY = 0-191 bind0 = numactl --physcpubind=0-191 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 192 644.nab_s=peak: threads = 192 ENV_GOMP_CPU_AFFINITY = 0 96 1 97 2 98 3 99 4 100 5 101 6 102 7 103 8 104 9 105 10 106 11 107 12 108 13 109 14 110 15 111 16 112 17 113 18 114 19 115 20 116 21 117 22 118 23 119 24 120 25 121 26 122 27 123 28 124 29 125 30 126 31 127 32 128 33 129 34 130 35 131 36 132 37 133 38 134 39 135 40 136 41 137 42 138 43 139 44 140 45 141 46 142 47 143 48 144 49 145 50 146 51 147 52 148 53 149 54 150 55 151 56 152 57 153 58 154 59 155 60 156 61 157 62 158 63 159 64 160 65 161 66 162 67 163 68 164 69 165 70 166 71 167 72 168 73 169 74 170 75 171 76 172 77 173 78 174 79 175 80 176 81 177 82 178 83 179 84 180 85 181 86 182 87 183 88 184 89 185 90 186 91 187 92 188 93 189 94 190 95 191 bind0 = numactl --physcpubind=0-191 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =9999 # (Your SPEC license number) tester =unknown tester test_sponsor =unknown sponsor hw_vendor =unknown vendor #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 4.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Nov-2022 sw_avail =Nov-2022 hw_cpu_name =AMD EPYC 9654 hw_cpu_nominal_mhz =2400 hw_cpu_max_mhz =3700 hw_ncores =192 hw_nthreadspercore =1 hw_ncpuorder =1,2 chips hw_other =None # Other perf-relevant hw, or "None" fw_bios =Version 0.0.0 released Nov-2022 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =1 MB I+D on chip per core hw_tcache000 =384 MB I+D on chip per chip, 32 MB shared / 8 hw_tcache001 = cores hw_ocache =None sw_other =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 9174F CPU + 1.5TiB Memory using RHEL 8.6 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 = notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_035 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_040 =To free node-local memory and avoid remote memory usage, notes_os_045 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_050 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_055 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_060 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. notes_os_065 = notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = # notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) # notes_jemalloc_005 =jemalloc 5.1.0 is available here: # notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 # notes_jemalloc_015 = # sw_other000 =jemalloc: jemalloc memory allocator library v5.1.0 ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (edit and uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = TDP: 400 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = PPT: 400 # notes_plat_010 = NPS: 4 # notes_plat_011 = Workload Profile = CPU Intensive # notes_plat_012 = TSME = Disabled # notes_plat_014 = SEV Control = Disabled # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intspeed: sw_peak_ptrsize =64-bit notes_os_thp_003 = ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fpspeed: sw_peak_ptrsize =Not Applicable notes_os_thp_015 =To always enable THP for peak runs of: notes_os_thp_020 =603.bwaves_s, 607.cactuBSSN_s, 619.lbm_s, 627.cam4_s, 628.pop2_s, 638.imagick_s, 644.nab_s, 649.fotonik3d_s: notes_os_thp_025 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_030 =run as root. notes_os_thp_035 =To disable THP for peak runs of 621.wrf_s: notes_os_thp_040 ='echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_045 =run as root. notes_os_thp_050 =To enable THP only on request for peak runs of 654.roms_s: notes_os_thp_055 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_060 =run as root. ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =unknown hw_nchips =2 prepared_by =prepared by unknown sw_file =unknown file sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.8-aocc400-B1b/config/amd_speed_aocc400_genoa_B1.inc' # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib:%{ENV_LIBRARY_PATH} % define build_ncpus 16 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. #teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/aocc400-flags.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref #teeout = yes #teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ # Include the flags file: ################################################################################ #include: %{flags_inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_genoa_B1_flags.inc' ############################################################################ ################################################################################ # AMD AOCC 4.0.0 SPEC CPU2017 V1.1.8 Speed Configuration Flags for AMD64 Linux ################################################################################ # Compilers ################################################################################ default: CC = clang -m64 CXX = clang++ -m64 FC = flang -m64 CLD = clang -m64 CXXLD = clang++ -m64 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default: # data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # Default libraries and variables ################################################################################ default: # Libraries: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdalloc \ -lamdlibm \ -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM # Variables: OPT_ROOT = -march=znver4 \ $(VECMATHLIB) \ -ffast-math \ -fopenmp OPT_ROOT_BASE = -O3 \ $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast \ $(OPT_ROOT) \ -flto THP_ALWAYS = echo always > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag THP_NEVER = echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo never > /sys/kernel/mm/transparent_hugepage/defrag THP_MADVISE = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag DEFAULT_SUBMIT = echo "$command" > run.sh ; $BIND bash run.sh ############################################################################### # AOCC 4.0.0 workarounds that do not count as PORTABILITY ################################################################################ # The workarounds in this section would not qualify under the SPEC CPU # PORTABILITY rule. # - In peak, they can be set as needed for individual benchmarks. # - In base, individual settings are not allowed; set for whole suite. # Use EXTRA_CFLAGS, EXTRA_CXXFLAGS, and EXTRA_FFLAGS for them. # # See: # https://www.spec.org/cpu2017/Docs/runrules.html#portability # https://www.spec.org/cpu2017/Docs/runrules.html#BaseFlags ####################### # Default workarounds # ####################### default: # Allow unused compile/link arguments without triggering warnings during build: EXTRA_CFLAGS = -Wno-unused-command-line-argument EXTRA_CXXFLAGS = -Wno-unused-command-line-argument EXTRA_FFLAGS = -Wno-unused-command-line-argument LDOPTIONS = -Wno-unused-command-line-argument #################### # Base workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - base # ############################## intrate=base: # The following is necessary for 602 gcc: EXTRA_LDFLAGS = -z muldefs ######################### # FP workarounds - base # ######################### # # *** NONE *** # #################### # Peak workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - peak # ############################## 602.gcc_s=peak: #lang='C' EXTRA_LDFLAGS = -z muldefs ##################################### # Floating Point workarounds - peak # ##################################### # # *** NONE *** # ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -fstruct-layout=7 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 \ -fremap-arrays \ -fstrip-mining \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -unroll-threshold=100 \ -finline-aggressive \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching #other libraries # Put OpenMP and math libraries here: # -lm needed at the end for some transcendental functions: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = ######################### # intspeed tuning flags # ######################### intspeed: FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -optimize-strided-mem-cost EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 EXTRA_CXXFLAGS = -fvirtual-function-elimination \ -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition LDCXXFLAGS = LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split ############################## # intspeed base tuning flags # ############################## intspeed=base: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lflang \ -lm EXTRA_CLIBS = -lamdalloc EXTRA_CXXLIBS = -lamdalloc-ext EXTRA_FLIBS = -lamdalloc submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################## # intspeed peak tuning flags # ############################## intspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed base tuning flags # ############################# fpspeed=base: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed peak tuning flags # ############################# fpspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=9 \ -mllvm -unroll-threshold=50 \ -fremap-arrays \ -fstrip-mining \ -mllvm -inline-threshold=1000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_PEAK) -finline-aggressive \ -mllvm -unroll-threshold=100 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw # Benchmark specific peak tuning flags: 603.bwaves_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 607.cactuBSSN_s=peak: #lang='CXX,C,F' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 619.lbm_s=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 620.omnetpp_s=peak: #lang='CXX' EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang -lm 621.wrf_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT_BASE) \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt submit = ${THP_NEVER}; ${DEFAULT_SUBMIT} 623.xalancbmk_s=peak: #lang='CXX' EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 \ -Wl,-mllvm -Wl,-do-block-reorder=aggressive EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang \ -lm 627.cam4_s=peak: #lang='F,C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 628.pop2_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT) \ -Ofast \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 638.imagick_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 644.nab_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-region-vectorize submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 649.fotonik3d_s=peak: #lang='F' ENV_PGHPF_ZMEM = yes submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 654.roms_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_MADVISE}; ${DEFAULT_SUBMIT} 657.xz_s=peak: #lang='C' ENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 8 # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.8-aocc400-B1b/config/amd_speed_aocc400_genoa_B1_flags.inc' # Dell #include: Dell.inc # ----- Begin inclusion of 'Dell.inc' ############################################################################ #---------------------------- # Dell #--------------------------- # # Values are auto-generated and will replace anything defined here. # # #------------------------------------------- # **** DO NOT EDIT BELOW HERE!!! #------------------------------------------- # %ifdef %{Dell-BIOS-inc} fprate,fpspeed,intrate,intspeed: power_management000 = BIOS and OS set to prefer performance power_management001 = at the cost of additional power usage. # #include: Dell-flags.inc # ----- Begin inclusion of 'Dell-flags.inc' ############################################################################ #------------------------------------------------------- # Dell EMC (Dell Inc.) # # AMD - Dell platform flags #------------------------------------------------------- default: flagsurl001=http://www.spec.org/cpu2017/flags/Dell-Platform-Flags-PowerEdge-AMD-EPYC-v1.0.xml # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.8-aocc400-B1b/config/Dell-flags.inc' #include: %{Dell-BIOS-inc} # ----- Begin inclusion of 'Dell-BIOS_EPYC-4.inc' ############################################################################ #------------------------------------------------------- # Dell # # AMD EPYC 4 (Genoa) #------------------------------------------------------- # # BIOS Settings # - It is rare that these settings would need to be changed. # fprate,fpspeed,intrate,intspeed: notes_plat_form_000 = notes_plat_form_005 = BIOS settings: fprate,fpspeed,intspeed,intrate: notes_plat_form_010 = DRAM Refresh Delay : Performance notes_plat_form_015 = DIMM Self Healing on notes_plat_form_020 = Uncorrectable Memory Error : Disabled fprate,fpspeed,intspeed: notes_plat_form_025 = Logical Processor : Disabled fprate,fpspeed,intrate,intspeed: notes_plat_form_030 = Virtualization Technology : Disabled fprate: notes_plat_form_207 = L1 Stride Prefetcher: : Disabled fprate,intrate,intspeed: notes_plat_form_210 = NUMA Nodes per Socket : 4 fprate,fpspeed,intrate,intspeed: notes_plat_form_035 = L3 Cache as NUMA Domain : Enabled notes_plat_form_040 = notes_plat_form_045 = System Profile : Custom fpspeed,intspeed: notes_plat_form_050 = C-States : Disabled fprate,fpspeed,intrate,intspeed: notes_plat_form_055 = Memory Patrol Scrub : Disabled notes_plat_form_060 = PCI ASPM L1 Link notes_plat_form_065 = Power Management : Disabled notes_plat_form_070 = Determinism Slider : Power Determinism fpspeed,intspeed: notes_plat_form_075 = Algorithm Performance notes_plat_form_080 = Boost Disable (ApbDis) : Enabled # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.8-aocc400-B1b/config/Dell-BIOS_EPYC-4.inc' #include: Dell-LIC.inc # ----- Begin inclusion of 'Dell-LIC.inc' ############################################################################ #------------------------------------------------------- # Dell EMC (Dell Inc.) # # SPEC Licensing Info #------------------------------------------------------- fprate,fpspeed,intrate,intspeed: hw_vendor = Dell Inc. tester = Dell Inc. test_sponsor = Dell Inc. prepared_by = Dell Inc. license_num = 6573 # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.8-aocc400-B1b/config/Dell-LIC.inc' #include: Dell-cleanup.inc # ----- Begin inclusion of 'Dell-cleanup.inc' ############################################################################ #------------------------------------------------------- # Dell EMC (Dell Inc.) # # AMD #------------------------------------------------------- # cleanup - sysinfo/AMD scripts fprate,fpspeed,intspeed,intrate: #sw_os000 = %undef% #sw_os001 = %undef% sw_os002 = %undef% #hw_memory000 = %undef% hw_memory001 = %undef% hw_memory002 = %undef% #hw_model000 = %undef% #hw_model001 = %undef% # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.8-aocc400-B1b/config/Dell-cleanup.inc' # #include: Dell-Autogen.inc # ----- Begin inclusion of 'Dell-Autogen.inc' ############################################################################ fprate,fpspeed,intrate,intspeed: hw_model = PowerEdge R6625 (AMD EPYC 9654 96-Core Processor) hw_cpu_name = AMD EPYC 9654 hw_ncpuorder = 1,2 chips hw_ncores = 192 hw_nthreadspercore = 1 fw_bios = Version 1.1.0 released Nov-2022 sw_state = Run level 3 (multi-user) sw_file = tmpfs hw_disk = 125 GB on tmpfs notes_tmpfs_000 = notes_tmpfs_005 = Benchmark run from a 125 GB ramdisk created with the cmd: "mount -t tmpfs -o size=125G tmpfs /mnt/ramdisk" sw_os000 = Ubuntu 22.04.1 LTS sw_os001 = 5.15.0-46-generic hw_cpu_nominal_mhz = 2400 hw_memory000 = 1536 GB (24 x 64 GB 2Rx4 PC5-4800B-R) sw_avail = Nov-2022 hw_avail = Feb-2023 # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.8-aocc400-B1b/config/Dell-Autogen.inc' %endif # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.8-aocc400-B1b/config/Dell.inc' # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:679c83684f6f4fc369a093999b6661d0a378911de2a006d3245423ad80d3fb9a) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /mnt/ramdisk/cpu2017-1.1.8-aocc400-B1b/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6622 of 2021-04-07 982a61ec0915b55891ef0e16acafc64d notes_plat_sysinfo_015 = running on genoa-sut Thu Dec 15 01:15:05 2022 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = For more information on this section, see notes_plat_sysinfo_035 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : AMD EPYC 9654 96-Core Processor notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 192 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_070 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_075 = cpu cores : 96 notes_plat_sysinfo_080 = siblings : 96 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 16 17 18 19 20 21 22 23 32 33 34 35 36 37 38 39 notes_plat_sysinfo_090 = 48 49 50 51 52 53 54 55 64 65 66 67 68 69 70 71 80 81 82 83 84 85 86 87 96 97 98 99 notes_plat_sysinfo_095 = 100 101 102 103 112 113 114 115 116 117 118 119 128 129 130 131 132 133 134 135 144 notes_plat_sysinfo_100 = 145 146 147 148 149 150 151 160 161 162 163 164 165 166 167 176 177 178 179 180 181 notes_plat_sysinfo_105 = 182 183 notes_plat_sysinfo_110 = physical 1: cores 0 1 2 3 4 5 6 7 16 17 18 19 20 21 22 23 32 33 34 35 36 37 38 39 notes_plat_sysinfo_115 = 48 49 50 51 52 53 54 55 64 65 66 67 68 69 70 71 80 81 82 83 84 85 86 87 96 97 98 99 notes_plat_sysinfo_120 = 100 101 102 103 112 113 114 115 116 117 118 119 128 129 130 131 132 133 134 135 144 notes_plat_sysinfo_125 = 145 146 147 148 149 150 151 160 161 162 163 164 165 166 167 176 177 178 179 180 181 notes_plat_sysinfo_130 = 182 183 notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From lscpu from util-linux 2.37.2: notes_plat_sysinfo_145 = Architecture: x86_64 notes_plat_sysinfo_150 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_155 = Address sizes: 52 bits physical, 57 bits virtual notes_plat_sysinfo_160 = Byte Order: Little Endian notes_plat_sysinfo_165 = CPU(s): 192 notes_plat_sysinfo_170 = On-line CPU(s) list: 0-191 notes_plat_sysinfo_175 = Vendor ID: AuthenticAMD notes_plat_sysinfo_180 = Model name: AMD EPYC 9654 96-Core Processor notes_plat_sysinfo_185 = CPU family: 25 notes_plat_sysinfo_190 = Model: 17 notes_plat_sysinfo_195 = Thread(s) per core: 1 notes_plat_sysinfo_200 = Core(s) per socket: 96 notes_plat_sysinfo_205 = Socket(s): 2 notes_plat_sysinfo_210 = Stepping: 1 notes_plat_sysinfo_215 = Frequency boost: enabled notes_plat_sysinfo_220 = CPU max MHz: 3709.0000 notes_plat_sysinfo_225 = CPU min MHz: 400.0000 notes_plat_sysinfo_230 = BogoMIPS: 4801.28 notes_plat_sysinfo_235 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr notes_plat_sysinfo_240 = pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt notes_plat_sysinfo_245 = pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid notes_plat_sysinfo_250 = aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe notes_plat_sysinfo_255 = popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a notes_plat_sysinfo_260 = misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb notes_plat_sysinfo_265 = bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 invpcid_single hw_pstate ssbd mba ibrs notes_plat_sysinfo_270 = ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a avx512f notes_plat_sysinfo_275 = avx512dq rdseed adx smap avx512ifma clflushopt clwb avx512cd sha_ni avx512bw notes_plat_sysinfo_280 = avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total notes_plat_sysinfo_285 = cqm_mbm_local avx512_bf16 clzero irperf xsaveerptr rdpru wbnoinvd amd_ppin cppc arat notes_plat_sysinfo_290 = npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists notes_plat_sysinfo_295 = pausefilter pfthreshold avic v_vmsave_vmload vgif v_spec_ctrl avx512vbmi umip pku notes_plat_sysinfo_300 = ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg avx512_vpopcntdq notes_plat_sysinfo_305 = la57 rdpid overflow_recov succor smca fsrm flush_l1d notes_plat_sysinfo_310 = Virtualization: AMD-V notes_plat_sysinfo_315 = L1d cache: 6 MiB (192 instances) notes_plat_sysinfo_320 = L1i cache: 6 MiB (192 instances) notes_plat_sysinfo_325 = L2 cache: 192 MiB (192 instances) notes_plat_sysinfo_330 = L3 cache: 768 MiB (24 instances) notes_plat_sysinfo_335 = NUMA node(s): 24 notes_plat_sysinfo_340 = NUMA node0 CPU(s): 0-7 notes_plat_sysinfo_345 = NUMA node1 CPU(s): 32-39 notes_plat_sysinfo_350 = NUMA node2 CPU(s): 64-71 notes_plat_sysinfo_355 = NUMA node3 CPU(s): 16-23 notes_plat_sysinfo_360 = NUMA node4 CPU(s): 48-55 notes_plat_sysinfo_365 = NUMA node5 CPU(s): 80-87 notes_plat_sysinfo_370 = NUMA node6 CPU(s): 24-31 notes_plat_sysinfo_375 = NUMA node7 CPU(s): 56-63 notes_plat_sysinfo_380 = NUMA node8 CPU(s): 88-95 notes_plat_sysinfo_385 = NUMA node9 CPU(s): 8-15 notes_plat_sysinfo_390 = NUMA node10 CPU(s): 40-47 notes_plat_sysinfo_395 = NUMA node11 CPU(s): 72-79 notes_plat_sysinfo_400 = NUMA node12 CPU(s): 96-103 notes_plat_sysinfo_405 = NUMA node13 CPU(s): 128-135 notes_plat_sysinfo_410 = NUMA node14 CPU(s): 160-167 notes_plat_sysinfo_415 = NUMA node15 CPU(s): 112-119 notes_plat_sysinfo_420 = NUMA node16 CPU(s): 144-151 notes_plat_sysinfo_425 = NUMA node17 CPU(s): 176-183 notes_plat_sysinfo_430 = NUMA node18 CPU(s): 120-127 notes_plat_sysinfo_435 = NUMA node19 CPU(s): 152-159 notes_plat_sysinfo_440 = NUMA node20 CPU(s): 184-191 notes_plat_sysinfo_445 = NUMA node21 CPU(s): 104-111 notes_plat_sysinfo_450 = NUMA node22 CPU(s): 136-143 notes_plat_sysinfo_455 = NUMA node23 CPU(s): 168-175 notes_plat_sysinfo_460 = Vulnerability Itlb multihit: Not affected notes_plat_sysinfo_465 = Vulnerability L1tf: Not affected notes_plat_sysinfo_470 = Vulnerability Mds: Not affected notes_plat_sysinfo_475 = Vulnerability Meltdown: Not affected notes_plat_sysinfo_480 = Vulnerability Mmio stale data: Not affected notes_plat_sysinfo_485 = Vulnerability Retbleed: Not affected notes_plat_sysinfo_490 = Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via notes_plat_sysinfo_495 = prctl and seccomp notes_plat_sysinfo_500 = Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user notes_plat_sysinfo_505 = pointer sanitization notes_plat_sysinfo_510 = Vulnerability Spectre v2: Mitigation; Retpolines, IBPB conditional, IBRS_FW, notes_plat_sysinfo_515 = STIBP disabled, RSB filling notes_plat_sysinfo_520 = Vulnerability Srbds: Not affected notes_plat_sysinfo_525 = Vulnerability Tsx async abort: Not affected notes_plat_sysinfo_530 = notes_plat_sysinfo_535 = From lscpu --cache: notes_plat_sysinfo_540 = NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE notes_plat_sysinfo_545 = L1d 32K 6M 8 Data 1 64 1 64 notes_plat_sysinfo_550 = L1i 32K 6M 8 Instruction 1 64 1 64 notes_plat_sysinfo_555 = L2 1M 192M 8 Unified 2 2048 1 64 notes_plat_sysinfo_560 = L3 32M 768M 16 Unified 3 32768 1 64 notes_plat_sysinfo_565 = notes_plat_sysinfo_570 = /proc/cpuinfo cache data notes_plat_sysinfo_575 = cache size : 1024 KB notes_plat_sysinfo_580 = notes_plat_sysinfo_585 = From numactl --hardware notes_plat_sysinfo_590 = WARNING: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_595 = available: 24 nodes (0-23) notes_plat_sysinfo_600 = node 0 cpus: 0 1 2 3 4 5 6 7 notes_plat_sysinfo_605 = node 0 size: 64056 MB notes_plat_sysinfo_610 = node 0 free: 63799 MB notes_plat_sysinfo_615 = node 1 cpus: 32 33 34 35 36 37 38 39 notes_plat_sysinfo_620 = node 1 size: 64474 MB notes_plat_sysinfo_625 = node 1 free: 59890 MB notes_plat_sysinfo_630 = node 2 cpus: 64 65 66 67 68 69 70 71 notes_plat_sysinfo_635 = node 2 size: 64509 MB notes_plat_sysinfo_640 = node 2 free: 64265 MB notes_plat_sysinfo_645 = node 3 cpus: 16 17 18 19 20 21 22 23 notes_plat_sysinfo_650 = node 3 size: 64509 MB notes_plat_sysinfo_655 = node 3 free: 64273 MB notes_plat_sysinfo_660 = node 4 cpus: 48 49 50 51 52 53 54 55 notes_plat_sysinfo_665 = node 4 size: 64509 MB notes_plat_sysinfo_670 = node 4 free: 64258 MB notes_plat_sysinfo_675 = node 5 cpus: 80 81 82 83 84 85 86 87 notes_plat_sysinfo_680 = node 5 size: 64509 MB notes_plat_sysinfo_685 = node 5 free: 64242 MB notes_plat_sysinfo_690 = node 6 cpus: 24 25 26 27 28 29 30 31 notes_plat_sysinfo_695 = node 6 size: 64509 MB notes_plat_sysinfo_700 = node 6 free: 64347 MB notes_plat_sysinfo_705 = node 7 cpus: 56 57 58 59 60 61 62 63 notes_plat_sysinfo_710 = node 7 size: 64509 MB notes_plat_sysinfo_715 = node 7 free: 64278 MB notes_plat_sysinfo_720 = node 8 cpus: 88 89 90 91 92 93 94 95 notes_plat_sysinfo_725 = node 8 size: 64487 MB notes_plat_sysinfo_730 = node 8 free: 63242 MB notes_plat_sysinfo_735 = node 9 cpus: 8 9 10 11 12 13 14 15 notes_plat_sysinfo_740 = node 9 size: 64509 MB notes_plat_sysinfo_745 = node 9 free: 64304 MB notes_plat_sysinfo_750 = node 10 cpus: 40 41 42 43 44 45 46 47 notes_plat_sysinfo_755 = node 10 size: 64509 MB notes_plat_sysinfo_760 = node 10 free: 64342 MB notes_plat_sysinfo_765 = node 11 cpus: 72 73 74 75 76 77 78 79 notes_plat_sysinfo_770 = node 11 size: 64509 MB notes_plat_sysinfo_775 = node 11 free: 64178 MB notes_plat_sysinfo_780 = node 12 cpus: 96 97 98 99 100 101 102 103 notes_plat_sysinfo_785 = node 12 size: 64509 MB notes_plat_sysinfo_790 = node 12 free: 64387 MB notes_plat_sysinfo_795 = node 13 cpus: 128 129 130 131 132 133 134 135 notes_plat_sysinfo_800 = node 13 size: 64509 MB notes_plat_sysinfo_805 = node 13 free: 64389 MB notes_plat_sysinfo_810 = node 14 cpus: 160 161 162 163 164 165 166 167 notes_plat_sysinfo_815 = node 14 size: 64509 MB notes_plat_sysinfo_820 = node 14 free: 64367 MB notes_plat_sysinfo_825 = node 15 cpus: 112 113 114 115 116 117 118 119 notes_plat_sysinfo_830 = node 15 size: 64509 MB notes_plat_sysinfo_835 = node 15 free: 64388 MB notes_plat_sysinfo_840 = node 16 cpus: 144 145 146 147 148 149 150 151 notes_plat_sysinfo_845 = node 16 size: 64509 MB notes_plat_sysinfo_850 = node 16 free: 64371 MB notes_plat_sysinfo_855 = node 17 cpus: 176 177 178 179 180 181 182 183 notes_plat_sysinfo_860 = node 17 size: 64509 MB notes_plat_sysinfo_865 = node 17 free: 64374 MB notes_plat_sysinfo_870 = node 18 cpus: 120 121 122 123 124 125 126 127 notes_plat_sysinfo_875 = node 18 size: 64509 MB notes_plat_sysinfo_880 = node 18 free: 64371 MB notes_plat_sysinfo_885 = node 19 cpus: 152 153 154 155 156 157 158 159 notes_plat_sysinfo_890 = node 19 size: 64509 MB notes_plat_sysinfo_895 = node 19 free: 64370 MB notes_plat_sysinfo_900 = node 20 cpus: 184 185 186 187 188 189 190 191 notes_plat_sysinfo_905 = node 20 size: 64478 MB notes_plat_sysinfo_910 = node 20 free: 64353 MB notes_plat_sysinfo_915 = node 21 cpus: 104 105 106 107 108 109 110 111 notes_plat_sysinfo_920 = node 21 size: 64509 MB notes_plat_sysinfo_925 = node 21 free: 64387 MB notes_plat_sysinfo_930 = node 22 cpus: 136 137 138 139 140 141 142 143 notes_plat_sysinfo_935 = node 22 size: 64509 MB notes_plat_sysinfo_940 = node 22 free: 64384 MB notes_plat_sysinfo_945 = node 23 cpus: 168 169 170 171 172 173 174 175 notes_plat_sysinfo_950 = node 23 size: 64509 MB notes_plat_sysinfo_955 = node 23 free: 64373 MB notes_plat_sysinfo_960 = node distances: notes_plat_sysinfo_965 = node 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 notes_plat_sysinfo_970 = 20 21 22 23 notes_plat_sysinfo_975 = 0: 10 11 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_980 = 32 32 32 32 notes_plat_sysinfo_985 = 1: 11 10 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_990 = 32 32 32 32 notes_plat_sysinfo_995 = 2: 11 11 10 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1000 = 32 32 32 32 notes_plat_sysinfo_1005 = 3: 11 11 11 10 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1010 = 32 32 32 32 notes_plat_sysinfo_1015 = 4: 11 11 11 11 10 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1020 = 32 32 32 32 notes_plat_sysinfo_1025 = 5: 11 11 11 11 11 10 11 11 11 11 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1030 = 32 32 32 32 notes_plat_sysinfo_1035 = 6: 11 11 11 11 11 11 10 11 11 11 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1040 = 32 32 32 32 notes_plat_sysinfo_1045 = 7: 11 11 11 11 11 11 11 10 11 11 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1050 = 32 32 32 32 notes_plat_sysinfo_1055 = 8: 11 11 11 11 11 11 11 11 10 11 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1060 = 32 32 32 32 notes_plat_sysinfo_1065 = 9: 11 11 11 11 11 11 11 11 11 10 11 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1070 = 32 32 32 32 notes_plat_sysinfo_1075 = 10: 11 11 11 11 11 11 11 11 11 11 10 11 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1080 = 32 32 32 32 notes_plat_sysinfo_1085 = 11: 11 11 11 11 11 11 11 11 11 11 11 10 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1090 = 32 32 32 32 notes_plat_sysinfo_1095 = 12: 32 32 32 32 32 32 32 32 32 32 32 32 10 11 11 11 11 11 11 11 notes_plat_sysinfo_1100 = 11 11 11 11 notes_plat_sysinfo_1105 = 13: 32 32 32 32 32 32 32 32 32 32 32 32 11 10 11 11 11 11 11 11 notes_plat_sysinfo_1110 = 11 11 11 11 notes_plat_sysinfo_1115 = 14: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 10 11 11 11 11 11 notes_plat_sysinfo_1120 = 11 11 11 11 notes_plat_sysinfo_1125 = 15: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 10 11 11 11 11 notes_plat_sysinfo_1130 = 11 11 11 11 notes_plat_sysinfo_1135 = 16: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 10 11 11 11 notes_plat_sysinfo_1140 = 11 11 11 11 notes_plat_sysinfo_1145 = 17: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 10 11 11 notes_plat_sysinfo_1150 = 11 11 11 11 notes_plat_sysinfo_1155 = 18: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 10 11 notes_plat_sysinfo_1160 = 11 11 11 11 notes_plat_sysinfo_1165 = 19: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 10 notes_plat_sysinfo_1170 = 11 11 11 11 notes_plat_sysinfo_1175 = 20: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1180 = 10 11 11 11 notes_plat_sysinfo_1185 = 21: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1190 = 11 10 11 11 notes_plat_sysinfo_1195 = 22: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1200 = 11 11 10 11 notes_plat_sysinfo_1205 = 23: 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1210 = 11 11 11 10 notes_plat_sysinfo_1215 = notes_plat_sysinfo_1220 = From /proc/meminfo notes_plat_sysinfo_1225 = MemTotal: 1584840060 kB notes_plat_sysinfo_1230 = HugePages_Total: 0 notes_plat_sysinfo_1235 = Hugepagesize: 2048 kB notes_plat_sysinfo_1240 = notes_plat_sysinfo_1245 = /sbin/tuned-adm active notes_plat_sysinfo_1250 = Current active profile: latency-performance notes_plat_sysinfo_1255 = notes_plat_sysinfo_1260 = /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has notes_plat_sysinfo_1265 = performance notes_plat_sysinfo_1270 = notes_plat_sysinfo_1275 = /usr/bin/lsb_release -d notes_plat_sysinfo_1280 = Ubuntu 22.04.1 LTS notes_plat_sysinfo_1285 = notes_plat_sysinfo_1290 = From /etc/*release* /etc/*version* notes_plat_sysinfo_1295 = debian_version: bookworm/sid notes_plat_sysinfo_1300 = os-release: notes_plat_sysinfo_1305 = PRETTY_NAME="Ubuntu 22.04.1 LTS" notes_plat_sysinfo_1310 = NAME="Ubuntu" notes_plat_sysinfo_1315 = VERSION_ID="22.04" notes_plat_sysinfo_1320 = VERSION="22.04.1 LTS (Jammy Jellyfish)" notes_plat_sysinfo_1325 = VERSION_CODENAME=jammy notes_plat_sysinfo_1330 = ID=ubuntu notes_plat_sysinfo_1335 = ID_LIKE=debian notes_plat_sysinfo_1340 = HOME_URL="https://www.ubuntu.com/" notes_plat_sysinfo_1345 = notes_plat_sysinfo_1350 = uname -a: notes_plat_sysinfo_1355 = Linux genoa-sut 5.15.0-46-generic #49-Ubuntu SMP Thu Aug 4 18:03:25 UTC 2022 x86_64 notes_plat_sysinfo_1360 = x86_64 x86_64 GNU/Linux notes_plat_sysinfo_1365 = notes_plat_sysinfo_1370 = Kernel self-reported vulnerability status: notes_plat_sysinfo_1375 = notes_plat_sysinfo_1380 = CVE-2018-12207 (iTLB Multihit): Not affected notes_plat_sysinfo_1385 = CVE-2018-3620 (L1 Terminal Fault): Not affected notes_plat_sysinfo_1390 = Microarchitectural Data Sampling: Not affected notes_plat_sysinfo_1395 = CVE-2017-5754 (Meltdown): Not affected notes_plat_sysinfo_1400 = mmio_stale_data: Not affected notes_plat_sysinfo_1405 = retbleed: Not affected notes_plat_sysinfo_1410 = CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store notes_plat_sysinfo_1415 = Bypass disabled via prctl and notes_plat_sysinfo_1420 = seccomp notes_plat_sysinfo_1425 = CVE-2017-5753 (Spectre variant 1): Mitigation: usercopy/swapgs notes_plat_sysinfo_1430 = barriers and __user pointer notes_plat_sysinfo_1435 = sanitization notes_plat_sysinfo_1440 = CVE-2017-5715 (Spectre variant 2): Mitigation: Retpolines, IBPB: notes_plat_sysinfo_1445 = conditional, IBRS_FW, STIBP: notes_plat_sysinfo_1450 = disabled, RSB filling notes_plat_sysinfo_1455 = CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected notes_plat_sysinfo_1460 = CVE-2019-11135 (TSX Asynchronous Abort): Not affected notes_plat_sysinfo_1465 = notes_plat_sysinfo_1470 = run-level 3 Dec 15 00:03 notes_plat_sysinfo_1475 = notes_plat_sysinfo_1480 = SPEC is set to: /mnt/ramdisk/cpu2017-1.1.8-aocc400-B1b notes_plat_sysinfo_1485 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_1490 = tmpfs tmpfs 125G 3.4G 122G 3% /mnt/ramdisk notes_plat_sysinfo_1495 = notes_plat_sysinfo_1500 = From /sys/devices/virtual/dmi/id notes_plat_sysinfo_1505 = Vendor: Dell Inc. notes_plat_sysinfo_1510 = Product: PowerEdge R6625 notes_plat_sysinfo_1515 = Product Family: PowerEdge notes_plat_sysinfo_1520 = Serial: BGP4016 notes_plat_sysinfo_1525 = notes_plat_sysinfo_1530 = Additional information from dmidecode 3.3 follows. WARNING: Use caution when you notes_plat_sysinfo_1535 = interpret this section. The 'dmidecode' program reads system data which is "intended to notes_plat_sysinfo_1540 = allow hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_1545 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_1550 = Memory: notes_plat_sysinfo_1555 = 24x 802C0000802C MTC40F2046S1RC48BA1 64 GB 2 rank 4800 notes_plat_sysinfo_1560 = notes_plat_sysinfo_1565 = BIOS: notes_plat_sysinfo_1570 = BIOS Vendor: Dell Inc. notes_plat_sysinfo_1575 = BIOS Version: 1.1.0 notes_plat_sysinfo_1580 = BIOS Date: 11/25/2022 notes_plat_sysinfo_1585 = BIOS Revision: 1.1 notes_plat_sysinfo_1590 = notes_plat_sysinfo_1595 = (End of data from sysinfo program) hw_cpu_name = AMD EPYC 9654 96-Core hw_disk = 125 GB add more disk info here hw_nchips = 2 prepared_by = root (is never output, only tags rawfile) sw_file = tmpfs sw_os001 = Ubuntu 22.04.1 LTS sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program