SPEC CPU(R)2017 Integer Rate Result Supermicro SuperServer ARS-210M-NR (R12SPD-A , Ampere Altra Max M128-30) CPU2017 License: 001176 Test date: Nov-2022 Test sponsor: Supermicro Hardware availability: Nov-2022 Tested by: Supermicro Software availability: May-2022 Base Base Base Peak Peak Peak Benchmarks Copies Run Time Rate Copies Run Time Rate --------------- ------- --------- --------- ------- --------- --------- 500.perlbench_r 128 454 449 S 128 426 479 S 500.perlbench_r 128 452 451 S 128 424 481 * 500.perlbench_r 128 453 450 * 128 423 481 S 502.gcc_r 128 929 195 S 128 914 198 S 502.gcc_r 128 928 195 * 128 908 200 S 502.gcc_r 128 924 196 S 128 913 199 * 505.mcf_r 128 2249 92.0 S 128 2254 91.8 * 505.mcf_r 128 2251 91.9 S 128 2253 91.8 S 505.mcf_r 128 2250 91.9 * 128 2255 91.7 S 520.omnetpp_r 128 1185 142 * 128 1165 144 S 520.omnetpp_r 128 1186 142 S 128 1169 144 S 520.omnetpp_r 128 1185 142 S 128 1166 144 * 523.xalancbmk_r 128 507 266 S 128 503 269 S 523.xalancbmk_r 128 506 267 * 128 506 267 S 523.xalancbmk_r 128 505 267 S 128 505 268 * 525.x264_r 128 203 1100 S 128 203 1100 S 525.x264_r 128 204 1100 S 128 202 1110 * 525.x264_r 128 204 1100 * 128 202 1110 S 531.deepsjeng_r 128 262 559 S 128 263 558 S 531.deepsjeng_r 128 263 557 S 128 261 561 S 531.deepsjeng_r 128 262 559 * 128 262 561 * 541.leela_r 128 363 584 S 128 359 591 S 541.leela_r 128 362 585 S 128 358 592 * 541.leela_r 128 362 585 * 128 358 592 S 548.exchange2_r 128 237 1410 * 128 237 1410 * 548.exchange2_r 128 234 1430 S 128 234 1430 S 548.exchange2_r 128 238 1410 S 128 238 1410 S 557.xz_r 128 668 207 S 128 663 208 S 557.xz_r 128 667 207 * 128 662 209 S 557.xz_r 128 665 208 S 128 662 209 * ================================================================================= 500.perlbench_r 128 453 450 * 128 424 481 * 502.gcc_r 128 928 195 * 128 913 199 * 505.mcf_r 128 2250 91.9 * 128 2254 91.8 * 520.omnetpp_r 128 1185 142 * 128 1166 144 * 523.xalancbmk_r 128 506 267 * 128 505 268 * 525.x264_r 128 204 1100 * 128 202 1110 * 531.deepsjeng_r 128 262 559 * 128 262 561 * 541.leela_r 128 362 585 * 128 358 592 * 548.exchange2_r 128 237 1410 * 128 237 1410 * 557.xz_r 128 667 207 * 128 662 209 * SPECrate(R)2017_int_base 356 SPECrate(R)2017_int_peak 360 HARDWARE -------- CPU Name: Ampere Altra Max M128-30 Max MHz: 3300 Nominal: 3000 Enabled: 128 cores, 1 chip Orderable: 1 chip Cache L1: 64 KB I + 64 KB D on chip per core L2: 1 MB I+D on chip per core L3: 32 MB I+D on chip per chip Other: None Memory: 512 GB (8 x 64 GB 2Rx4 PC4-3200AA-R) Storage: 1 x 4 TB NVMe SSD Other: None SOFTWARE -------- OS: CentOS Stream release 8 Kernel 4.18.0-383.el8.aarch64 Compiler: C/C++/Fortran: Version 10.2.1 of Ampere GCC GNU Compiler Collection Parallel: No Firmware: Version 1.1 released Oct-2022 File System: xfs System State: Run level 3 (multi-user) Base Pointers: 64-bit Peak Pointers: 64-bit Other: Jemalloc memory allocator library v5.2.1 Power Management: BIOS and OS set to prefer performance at the cost of additional power usage. Submit Notes ------------ The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. Operating System Notes ---------------------- 'ulimit -s unlimited' was used to set environment stack size Set dirty_ratio=8 to limit dirty cache to 8% of memory i.e. echo 8 | sudo tee /proc/sys/vm/dirty_ratio Set swappiness=1 to swap only if necessary i.e. echo 1 | sudo tee /proc/sys/vm/swappiness Set zone_reclaim_mode=1 to free local node memory and avoid remote memory i.e. echo 1 | sudo tee /proc/sys/vm/zone_reclaim_mode Set drop_caches=3 to reset caches before invoking runcpu i.e. echo 3 | sudo tee /proc/sys/vm/drop_caches Set numa_balancing=0 to disable automatic numa balancing i.e. echo 0 | sudo tee /proc/sys/kernel/numa_balancing Switch off all ktune and tuned settings i.e. sudo tuned-adm off Transparent huge pages set to 'never' i.e. sudo bash -c "echo never > /sys/kernel/mm/transparent_hugepage/enabled" runcpu command invoked through numactl i.e. numactl --interleave=0-3 runcpu Environment Variables Notes --------------------------- Environment variables set by runcpu before the start of the run: LD_LIBRARY_PATH = "/home/amptest/ampere_spec2017/jemalloc/install/lib:/home/amptest/ampere _spec2017/gcc/install/lib64/:/home/amptest/ampere_spec2017/gcc/install/l ib/:/home/cpu2017-0621/gcc/install/lib64:/home/cpu2017-0621/jemalloc/ins tall/lib:" General Notes ------------- Binaries were compiled on a system with the following configuration Ampere Altra Q80-33 2P CPU + 512GB Memory using CentOS 8.2 + glibc 2.28 + binutil 2.30 Ampere GCC 10.2.1 is available via https://github.com/AmpereComputing/ampere-gcc/releases NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. NA: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Jemalloc v5.2.1 is available via https://github.com/jemalloc/jemalloc/releases/download/5.2.1/jemalloc-5.2.1.tar.bz2 Build aarch64 version with configure options --prefix=/home/amptest/jemalloc/install --with-lg-quantum=3 Platform Notes -------------- BIOS Settings: Enable ACPI Auto Configuration = Disabled Enable CPPC = Disabled Enable LPI = Disabled ANC mode = Quadrant Sysinfo program /home/cpu2017-0621/spec2017/bin/sysinfo Rev: r6622 of 2021-04-07 982a61ec0915b55891ef0e16acafc64d running on 135-170-65.engtw Mon Nov 28 09:39:23 2022 SUT (System Under Test) info as seen by some common utilities. For more information on this section, see https://www.spec.org/cpu2017/Docs/config.html#sysinfo From /proc/cpuinfo * * Did not identify cpu model. If you would * like to write your own sysinfo program, see * www.spec.org/cpu2017/config.html#sysinfo * * * 0 "physical id" tags found. Perhaps this is an older system, * or a virtualized system. Not attempting to guess how to * count chips/cores for this system. * 128 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) From lscpu from util-linux 2.32.1: Architecture: aarch64 Byte Order: Little Endian CPU(s): 128 On-line CPU(s) list: 0-127 Thread(s) per core: 1 Core(s) per socket: 128 Socket(s): 1 NUMA node(s): 4 Vendor ID: ARM BIOS Vendor ID: Ampere(R) Model: 1 Model name: Neoverse-N1 BIOS Model name: Ampere(R) Altra(R) Max Processor Stepping: r3p1 BogoMIPS: 50.00 L1d cache: 64K L1i cache: 64K L2 cache: 1024K NUMA node0 CPU(s): 0-31 NUMA node1 CPU(s): 32-63 NUMA node2 CPU(s): 64-95 NUMA node3 CPU(s): 96-127 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp ssbs From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a physical chip. available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 node 0 size: 129973 MB node 0 free: 127542 MB node 1 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 node 1 size: 130923 MB node 1 free: 129806 MB node 2 cpus: 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 node 2 size: 130923 MB node 2 free: 130464 MB node 3 cpus: 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 node 3 size: 130811 MB node 3 free: 130227 MB node distances: node 0 1 2 3 0: 10 11 11 12 1: 11 10 12 11 2: 11 12 10 11 3: 12 11 11 10 From /proc/meminfo MemTotal: 535176320 kB HugePages_Total: 0 Hugepagesize: 524288 kB /sbin/tuned-adm active No current active profile. From /etc/*release* /etc/*version* centos-release: CentOS Stream release 8 os-release: NAME="CentOS Stream" VERSION="8" ID="centos" ID_LIKE="rhel fedora" VERSION_ID="8" PLATFORM_ID="platform:el8" PRETTY_NAME="CentOS Stream 8" ANSI_COLOR="0;31" redhat-release: CentOS Stream release 8 system-release: CentOS Stream release 8 system-release-cpe: cpe:/o:centos:centos:8 uname -a: Linux 135-170-65.engtw 4.18.0-383.el8.aarch64 #1 SMP Wed Apr 20 15:39:57 UTC 2022 aarch64 aarch64 aarch64 GNU/Linux Kernel self-reported vulnerability status: CVE-2018-12207 (iTLB Multihit): Not affected CVE-2018-3620 (L1 Terminal Fault): Not affected Microarchitectural Data Sampling: Not affected CVE-2017-5754 (Meltdown): Not affected CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled via prctl CVE-2017-5753 (Spectre variant 1): Mitigation: __user pointer sanitization CVE-2017-5715 (Spectre variant 2): Not affected CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected CVE-2019-11135 (TSX Asynchronous Abort): Not affected run-level 3 Nov 28 09:32 SPEC is set to: /home/cpu2017-0621/spec2017 Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/cl-home xfs 3.5T 279G 3.2T 8% /home From /sys/devices/virtual/dmi/id Vendor: Supermicro Corporation Product: R12SPD .......... Product Family: Altra Max Serial: ............ Additional information from dmidecode 3.3 follows. WARNING: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. Memory: 8x Samsung M393A8G 64 GB 2 rank 3200 BIOS: BIOS Vendor: Ampere(R) BIOS Version: 1.1 BIOS Date: 10/31/2022 BIOS Revision: 5.15 (End of data from sysinfo program) Compiler Version Notes ---------------------- ============================================================================== C | 500.perlbench_r(base, peak) 502.gcc_r(base, peak) 505.mcf_r(base, | peak) 525.x264_r(base, peak) 557.xz_r(base, peak) ------------------------------------------------------------------------------ gcc (Ampere Computing Build 11923 20201215) 10.2.1 20201216 Copyright (C) 2020 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ------------------------------------------------------------------------------ ============================================================================== C++ | 520.omnetpp_r(base, peak) 523.xalancbmk_r(base, peak) | 531.deepsjeng_r(base, peak) 541.leela_r(base, peak) ------------------------------------------------------------------------------ g++ (Ampere Computing Build 11923 20201215) 10.2.1 20201216 Copyright (C) 2020 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ------------------------------------------------------------------------------ ============================================================================== Fortran | 548.exchange2_r(base, peak) ------------------------------------------------------------------------------ GNU Fortran (Ampere Computing Build 11923 20201215) 10.2.1 20201216 Copyright (C) 2020 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ------------------------------------------------------------------------------ Base Compiler Invocation ------------------------ C benchmarks: gcc C++ benchmarks: g++ Fortran benchmarks: gfortran Base Portability Flags ---------------------- 500.perlbench_r: -DSPEC_LINUX_AARCH64 -DSPEC_LP64 502.gcc_r: -DSPEC_LP64 505.mcf_r: -DSPEC_LP64 520.omnetpp_r: -DSPEC_LP64 523.xalancbmk_r: -DSPEC_LINUX -DSPEC_LP64 525.x264_r: -DSPEC_LP64 531.deepsjeng_r: -DSPEC_LP64 541.leela_r: -DSPEC_LP64 548.exchange2_r: -DSPEC_LP64 557.xz_r: -DSPEC_LP64 Base Optimization Flags ----------------------- C benchmarks: -mabi=lp64 -std=c99 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -g -O3 -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=96 --param max-inline-insns-auto=64 --param inline-unit-growth=96 -fgnu89-inline -ljemalloc C++ benchmarks: -mabi=lp64 -std=c++03 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -g -O3 -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=256 --param max-inline-insns-auto=128 --param inline-unit-growth=256 -ffinite-loops -ljemalloc Fortran benchmarks: -mabi=lp64 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -g -O3 -mcpu=neoverse-n1 -funroll-loops -flto=32 --param ipa-cp-eval-threshold=1 --param ipa-cp-unit-growth=80 --param ipa-cp-max-recursive-depth=8 -fno-inline-functions-called-once -fstack-arrays -flto-partition=one -ljemalloc Base Other Flags ---------------- C benchmarks: -fcommon -Wl,-Map,mapfile C++ benchmarks: -Wl,-Map,mapfile Fortran benchmarks: -Wl,-Map,mapfile Peak Compiler Invocation ------------------------ C benchmarks: gcc C++ benchmarks: g++ Fortran benchmarks: gfortran Peak Portability Flags ---------------------- Same as Base Portability Flags Peak Optimization Flags ----------------------- C benchmarks: 500.perlbench_r: -mabi=lp64 -std=c99 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -fprofile-generate -fprofile-use -g -Ofast -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=96 --param max-inline-insns-auto=64 --param inline-unit-growth=96 -fno-strict-aliasing -fno-unsafe-math-optimizations -fno-finite-math-only -ljemalloc 502.gcc_r: -mabi=lp64 -std=c99 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -fprofile-generate -fprofile-use -g -Ofast -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=96 --param max-inline-insns-auto=64 --param inline-unit-growth=96 -fno-strict-aliasing -fgnu89-inline -ljemalloc 505.mcf_r: -mabi=lp64 -std=c99 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -fprofile-generate -fprofile-use -g -Ofast -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=96 --param max-inline-insns-auto=64 --param inline-unit-growth=96 -fno-strict-aliasing -ljemalloc 525.x264_r: -mabi=lp64 -std=c99 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -g -Ofast -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=96 --param max-inline-insns-auto=64 --param inline-unit-growth=96 -ljemalloc 557.xz_r: -mabi=lp64 -std=c99 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -fprofile-generate -fprofile-use -g -Ofast -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=96 --param max-inline-insns-auto=64 --param inline-unit-growth=96 -ljemalloc C++ benchmarks: 520.omnetpp_r: -mabi=lp64 -std=c++03 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -fprofile-generate -fprofile-use -g -Ofast -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=256 --param max-inline-insns-auto=128 --param inline-unit-growth=256 -ffinite-loops -ljemalloc 523.xalancbmk_r: Same as 520.omnetpp_r 531.deepsjeng_r: -mabi=lp64 -std=c++03 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -g -Ofast -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=256 --param max-inline-insns-auto=128 --param inline-unit-growth=256 -ffinite-loops -ljemalloc 541.leela_r: Same as 520.omnetpp_r Fortran benchmarks: 548.exchange2_r: basepeak = yes Peak Other Flags ---------------- C benchmarks (except as noted below): -Wl,-Map,mapfile 525.x264_r: -fcommon -Wl,-Map,mapfile 557.xz_r: -w -Wl,-Map,mapfile C++ benchmarks: -Wl,-Map,mapfile Fortran benchmarks: -Wl,-Map,mapfile The flags files that were used to format this result can be browsed at http://www.spec.org/cpu2017/flags/gcc.2021-07-21.html http://www.spec.org/cpu2017/flags/Supermicro-Platform-Settings-V1.2-Ampere-revD.html You can also download the XML flags sources by saving the following links: http://www.spec.org/cpu2017/flags/gcc.2021-07-21.xml http://www.spec.org/cpu2017/flags/Supermicro-Platform-Settings-V1.2-Ampere-revD.xml SPEC CPU and SPECrate are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders. ---------------------------------------------------------------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact info@spec.org. Copyright 2017-2022 Standard Performance Evaluation Corporation Tested with SPEC CPU(R)2017 v1.1.8 on 2022-11-27 20:39:23-0500. Report generated on 2022-12-20 15:09:35 by CPU2017 text formatter v6255. Originally published on 2022-12-20.