SPEC CPU®2017 Integer Rate Result

Copyright 2017-2022 Standard Performance Evaluation Corporation

Supermicro

SuperServer ARS-210M-NR
(R12SPD-A , Ampere Altra Max M128-30)

SPECrate®2017_int_base = 35600

SPECrate®2017_int_peak = 36000

CPU2017 License: 001176 Test Date: Nov-2022
Test Sponsor: Supermicro Hardware Availability: Nov-2022
Tested by: Supermicro Software Availability: May-2022

Benchmark result graphs are available in the PDF report.

Hardware
CPU Name: Ampere Altra Max M128-30
  Max MHz: 3300
  Nominal: 3000
Enabled: 128 cores, 1 chip
Orderable: 1 chip
Cache L1: 64 KB I + 64 KB D on chip per core
  L2: 1 MB I+D on chip per core
  L3: 32 MB I+D on chip per chip
  Other: None
Memory: 512 GB (8 x 64 GB 2Rx4 PC4-3200AA-R)
Storage: 1 x 4 TB NVMe SSD
Other: None
Software
OS: CentOS Stream release 8
Kernel 4.18.0-383.el8.aarch64
Compiler: C/C++/Fortran: Version 10.2.1 of Ampere GCC
GNU Compiler Collection
Parallel: No
Firmware: Version 1.1 released Oct-2022
File System: xfs
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: 64-bit
Other: Jemalloc memory allocator library v5.2.1
Power Management: BIOS and OS set to prefer performance at the cost
of additional power usage.

Results Table

Benchmark Base Peak
Copies Seconds Ratio Seconds Ratio Seconds Ratio Copies Seconds Ratio Seconds Ratio Seconds Ratio
SPECrate®2017_int_base 35600
SPECrate®2017_int_peak 36000
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
500.perlbench_r 128 454 4490 452 4510 453 4500 128 426 4790 424 4810 423 4810
502.gcc_r 128 929 1950 928 1950 924 1960 128 914 1980 908 2000 913 1990
505.mcf_r 128 2249 92.0 2251 91.9 2250 91.9 128 2254 91.8 2253 91.8 2255 91.7
520.omnetpp_r 128 1185 1420 1186 1420 1185 1420 128 1165 1440 1169 1440 1166 1440
523.xalancbmk_r 128 507 2660 506 2670 505 2670 128 503 2690 506 2670 505 2680
525.x264_r 128 203 11000 204 11000 204 11000 128 203 11000 202 11100 202 11100
531.deepsjeng_r 128 262 5590 263 5570 262 5590 128 263 5580 261 5610 262 5610
541.leela_r 128 363 5840 362 5850 362 5850 128 359 5910 358 5920 358 5920
548.exchange2_r 128 237 14100 234 14300 238 14100 128 237 14100 234 14300 238 14100
557.xz_r 128 668 2070 667 2070 665 2080 128 663 2080 662 2090 662 2090

Submit Notes

 The config file option 'submit' was used.
 'numactl' was used to bind copies to the cores.

Operating System Notes

 'ulimit -s unlimited' was used to set environment stack size
 Set dirty_ratio=8 to limit dirty cache to 8% of memory
 i.e. echo 8 | sudo tee /proc/sys/vm/dirty_ratio
 Set swappiness=1 to swap only if necessary
 i.e. echo 1 | sudo tee /proc/sys/vm/swappiness
 Set zone_reclaim_mode=1 to free local node memory and avoid remote memory
 i.e. echo 1 | sudo tee /proc/sys/vm/zone_reclaim_mode
 Set drop_caches=3 to reset caches before invoking runcpu
 i.e. echo 3 | sudo tee /proc/sys/vm/drop_caches
 Set numa_balancing=0 to disable automatic numa balancing
 i.e. echo 0 | sudo tee /proc/sys/kernel/numa_balancing
 Switch off all ktune and tuned settings
 i.e. sudo tuned-adm off
 Transparent huge pages set to 'never'
 i.e. sudo bash -c "echo never > /sys/kernel/mm/transparent_hugepage/enabled"

 runcpu command invoked through numactl i.e.
 numactl --interleave=0-3 runcpu <etc>

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH =
     "/home/amptest/ampere_spec2017/jemalloc/install/lib:/home/amptest/ampere
     _spec2017/gcc/install/lib64/:/home/amptest/ampere_spec2017/gcc/install/l
     ib/:/home/cpu2017-0621/gcc/install/lib64:/home/cpu2017-0621/jemalloc/ins
     tall/lib:"

General Notes

 Binaries were compiled on a system with the following configuration
 Ampere Altra Q80-33 2P CPU + 512GB Memory
 using CentOS 8.2 + glibc 2.28 + binutil 2.30

 Ampere GCC 10.2.1 is available via
 https://github.com/AmpereComputing/ampere-gcc/releases

NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1)
is mitigated in the system as tested and documented.
NA: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
is mitigated in the system as tested and documented.
 Jemalloc v5.2.1 is available via
 https://github.com/jemalloc/jemalloc/releases/download/5.2.1/jemalloc-5.2.1.tar.bz2
 Build aarch64 version with configure options
 --prefix=/home/amptest/jemalloc/install --with-lg-quantum=3

Platform Notes

BIOS Settings:
Enable ACPI Auto Configuration = Disabled
Enable CPPC = Disabled
Enable LPI = Disabled
ANC mode = Quadrant

 Sysinfo program /home/cpu2017-0621/spec2017/bin/sysinfo
 Rev: r6622 of 2021-04-07 982a61ec0915b55891ef0e16acafc64d
 running on 135-170-65.engtw Mon Nov 28 09:39:23 2022

 SUT (System Under Test) info as seen by some common utilities.
 For more information on this section, see
    https://www.spec.org/cpu2017/Docs/config.html#sysinfo

 From /proc/cpuinfo
 *
 * Did not identify cpu model.  If you would
 * like to write your own sysinfo program, see
 * www.spec.org/cpu2017/config.html#sysinfo
 *
 *
 * 0 "physical id" tags found.  Perhaps this is an older system,
 * or a virtualized system.  Not attempting to guess how to
 * count chips/cores for this system.
 *
       128 "processors"
    cores, siblings (Caution: counting these is hw and system dependent. The following
    excerpts from /proc/cpuinfo might not be reliable.  Use with caution.)

 From lscpu from util-linux 2.32.1:
      Architecture:        aarch64
      Byte Order:          Little Endian
      CPU(s):              128
      On-line CPU(s) list: 0-127
      Thread(s) per core:  1
      Core(s) per socket:  128
      Socket(s):           1
      NUMA node(s):        4
      Vendor ID:           ARM
      BIOS Vendor ID:      Ampere(R)
      Model:               1
      Model name:          Neoverse-N1
      BIOS Model name:     Ampere(R) Altra(R) Max Processor
      Stepping:            r3p1
      BogoMIPS:            50.00
      L1d cache:           64K
      L1i cache:           64K
      L2 cache:            1024K
      NUMA node0 CPU(s):   0-31
      NUMA node1 CPU(s):   32-63
      NUMA node2 CPU(s):   64-95
      NUMA node3 CPU(s):   96-127
      Flags:               fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp
      cpuid asimdrdm lrcpc dcpop asimddp ssbs

 From numactl --hardware
 WARNING: a numactl 'node' might or might not correspond to a physical chip.
   available: 4 nodes (0-3)
   node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
   28 29 30 31
   node 0 size: 129973 MB
   node 0 free: 127542 MB
   node 1 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56
   57 58 59 60 61 62 63
   node 1 size: 130923 MB
   node 1 free: 129806 MB
   node 2 cpus: 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88
   89 90 91 92 93 94 95
   node 2 size: 130923 MB
   node 2 free: 130464 MB
   node 3 cpus: 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114
   115 116 117 118 119 120 121 122 123 124 125 126 127
   node 3 size: 130811 MB
   node 3 free: 130227 MB
   node distances:
   node   0   1   2   3
     0:  10  11  11  12
     1:  11  10  12  11
     2:  11  12  10  11
     3:  12  11  11  10

 From /proc/meminfo
    MemTotal:       535176320 kB
    HugePages_Total:       0
    Hugepagesize:     524288 kB

 /sbin/tuned-adm active
     No current active profile.

 From /etc/*release* /etc/*version*
    centos-release: CentOS Stream release 8
    os-release:
       NAME="CentOS Stream"
       VERSION="8"
       ID="centos"
       ID_LIKE="rhel fedora"
       VERSION_ID="8"
       PLATFORM_ID="platform:el8"
       PRETTY_NAME="CentOS Stream 8"
       ANSI_COLOR="0;31"
    redhat-release: CentOS Stream release 8
    system-release: CentOS Stream release 8
    system-release-cpe: cpe:/o:centos:centos:8

 uname -a:
    Linux 135-170-65.engtw 4.18.0-383.el8.aarch64 #1 SMP Wed Apr 20 15:39:57 UTC 2022
    aarch64 aarch64 aarch64 GNU/Linux

 Kernel self-reported vulnerability status:

 CVE-2018-12207 (iTLB Multihit):                        Not affected
 CVE-2018-3620 (L1 Terminal Fault):                     Not affected
 Microarchitectural Data Sampling:                      Not affected
 CVE-2017-5754 (Meltdown):                              Not affected
 CVE-2018-3639 (Speculative Store Bypass):              Mitigation: Speculative Store
                                                        Bypass disabled via prctl
 CVE-2017-5753 (Spectre variant 1):                     Mitigation: __user pointer
                                                        sanitization
 CVE-2017-5715 (Spectre variant 2):                     Not affected
 CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected
 CVE-2019-11135 (TSX Asynchronous Abort):               Not affected

 run-level 3 Nov 28 09:32

 SPEC is set to: /home/cpu2017-0621/spec2017
    Filesystem          Type  Size  Used Avail Use% Mounted on
    /dev/mapper/cl-home xfs   3.5T  279G  3.2T   8% /home

 From /sys/devices/virtual/dmi/id
     Vendor:         Supermicro Corporation
     Product:        R12SPD ..........
     Product Family: Altra Max
     Serial:         ............

 Additional information from dmidecode 3.3 follows.  WARNING: Use caution when you
 interpret this section. The 'dmidecode' program reads system data which is "intended to
 allow hardware to be accurately determined", but the intent may not be met, as there are
 frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
   Memory:
     8x Samsung M393A8G 64 GB 2 rank 3200

 BIOS:
    BIOS Vendor:       Ampere(R)
    BIOS Version:      1.1
    BIOS Date:         10/31/2022
    BIOS Revision:     5.15

 (End of data from sysinfo program)

Compiler Version Notes

==============================================================================
C       | 500.perlbench_r(base, peak) 502.gcc_r(base, peak) 505.mcf_r(base,
        | peak) 525.x264_r(base, peak) 557.xz_r(base, peak)
------------------------------------------------------------------------------
gcc (Ampere Computing Build 11923 20201215) 10.2.1 20201216
Copyright (C) 2020 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
------------------------------------------------------------------------------

==============================================================================
C++     | 520.omnetpp_r(base, peak) 523.xalancbmk_r(base, peak)
        | 531.deepsjeng_r(base, peak) 541.leela_r(base, peak)
------------------------------------------------------------------------------
g++ (Ampere Computing Build 11923 20201215) 10.2.1 20201216
Copyright (C) 2020 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
------------------------------------------------------------------------------

==============================================================================
Fortran | 548.exchange2_r(base, peak)
------------------------------------------------------------------------------
GNU Fortran (Ampere Computing Build 11923 20201215) 10.2.1 20201216
Copyright (C) 2020 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 gcc 

C++ benchmarks:

 g++ 

Fortran benchmarks:

 gfortran 

Base Portability Flags

500.perlbench_r:  -DSPEC_LINUX_AARCH64   -DSPEC_LP64 
502.gcc_r:  -DSPEC_LP64 
505.mcf_r:  -DSPEC_LP64 
520.omnetpp_r:  -DSPEC_LP64 
523.xalancbmk_r:  -DSPEC_LINUX   -DSPEC_LP64 
525.x264_r:  -DSPEC_LP64 
531.deepsjeng_r:  -DSPEC_LP64 
541.leela_r:  -DSPEC_LP64 
548.exchange2_r:  -DSPEC_LP64 
557.xz_r:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -mabi=lp64   -std=c99   -L/home/amptest/ampere_spec2017/gcc/install/lib64   -L/home/amptest/ampere_spec2017/gcc/install/lib   -L/home/amptest/ampere_spec2017/jemalloc/install/lib   -g   -O3   -mcpu=neoverse-n1   -funroll-loops   -flto=32   --param early-inlining-insns=96   --param max-inline-insns-auto=64   --param inline-unit-growth=96   -fgnu89-inline   -ljemalloc 

C++ benchmarks:

 -mabi=lp64   -std=c++03   -L/home/amptest/ampere_spec2017/gcc/install/lib64   -L/home/amptest/ampere_spec2017/gcc/install/lib   -L/home/amptest/ampere_spec2017/jemalloc/install/lib   -g   -O3   -mcpu=neoverse-n1   -funroll-loops   -flto=32   --param early-inlining-insns=256   --param max-inline-insns-auto=128   --param inline-unit-growth=256   -ffinite-loops   -ljemalloc 

Fortran benchmarks:

 -mabi=lp64   -L/home/amptest/ampere_spec2017/gcc/install/lib64   -L/home/amptest/ampere_spec2017/gcc/install/lib   -L/home/amptest/ampere_spec2017/jemalloc/install/lib   -g   -O3   -mcpu=neoverse-n1   -funroll-loops   -flto=32   --param ipa-cp-eval-threshold=1   --param ipa-cp-unit-growth=80   --param ipa-cp-max-recursive-depth=8   -fno-inline-functions-called-once   -fstack-arrays   -flto-partition=one   -ljemalloc 

Base Other Flags

C benchmarks:

 -fcommon   -Wl,-Map,mapfile 

C++ benchmarks:

 -Wl,-Map,mapfile 

Fortran benchmarks:

 -Wl,-Map,mapfile 

Peak Compiler Invocation

C benchmarks:

 gcc 

C++ benchmarks:

 g++ 

Fortran benchmarks:

 gfortran 

Peak Portability Flags

Same as Base Portability Flags

Peak Optimization Flags

C benchmarks:

500.perlbench_r:  -mabi=lp64   -std=c99   -L/home/amptest/ampere_spec2017/gcc/install/lib64   -L/home/amptest/ampere_spec2017/gcc/install/lib   -L/home/amptest/ampere_spec2017/jemalloc/install/lib   -fprofile-generate   -fprofile-use   -g   -Ofast   -mcpu=neoverse-n1   -funroll-loops   -flto=32   --param early-inlining-insns=96   --param max-inline-insns-auto=64   --param inline-unit-growth=96   -fno-strict-aliasing   -fno-unsafe-math-optimizations   -fno-finite-math-only   -ljemalloc 
502.gcc_r:  -mabi=lp64   -std=c99   -L/home/amptest/ampere_spec2017/gcc/install/lib64   -L/home/amptest/ampere_spec2017/gcc/install/lib   -L/home/amptest/ampere_spec2017/jemalloc/install/lib   -fprofile-generate   -fprofile-use   -g   -Ofast   -mcpu=neoverse-n1   -funroll-loops   -flto=32   --param early-inlining-insns=96   --param max-inline-insns-auto=64   --param inline-unit-growth=96   -fno-strict-aliasing   -fgnu89-inline   -ljemalloc 
505.mcf_r:  -mabi=lp64   -std=c99   -L/home/amptest/ampere_spec2017/gcc/install/lib64   -L/home/amptest/ampere_spec2017/gcc/install/lib   -L/home/amptest/ampere_spec2017/jemalloc/install/lib   -fprofile-generate   -fprofile-use   -g   -Ofast   -mcpu=neoverse-n1   -funroll-loops   -flto=32   --param early-inlining-insns=96   --param max-inline-insns-auto=64   --param inline-unit-growth=96   -fno-strict-aliasing   -ljemalloc 
525.x264_r:  -mabi=lp64   -std=c99   -L/home/amptest/ampere_spec2017/gcc/install/lib64   -L/home/amptest/ampere_spec2017/gcc/install/lib   -L/home/amptest/ampere_spec2017/jemalloc/install/lib   -g   -Ofast   -mcpu=neoverse-n1   -funroll-loops   -flto=32   --param early-inlining-insns=96   --param max-inline-insns-auto=64   --param inline-unit-growth=96   -ljemalloc 
557.xz_r:  -mabi=lp64   -std=c99   -L/home/amptest/ampere_spec2017/gcc/install/lib64   -L/home/amptest/ampere_spec2017/gcc/install/lib   -L/home/amptest/ampere_spec2017/jemalloc/install/lib   -fprofile-generate   -fprofile-use   -g   -Ofast   -mcpu=neoverse-n1   -funroll-loops   -flto=32   --param early-inlining-insns=96   --param max-inline-insns-auto=64   --param inline-unit-growth=96   -ljemalloc 

C++ benchmarks:

520.omnetpp_r:  -mabi=lp64   -std=c++03   -L/home/amptest/ampere_spec2017/gcc/install/lib64   -L/home/amptest/ampere_spec2017/gcc/install/lib   -L/home/amptest/ampere_spec2017/jemalloc/install/lib   -fprofile-generate   -fprofile-use   -g   -Ofast   -mcpu=neoverse-n1   -funroll-loops   -flto=32   --param early-inlining-insns=256   --param max-inline-insns-auto=128   --param inline-unit-growth=256   -ffinite-loops   -ljemalloc 
523.xalancbmk_r:  Same as 520.omnetpp_r 
531.deepsjeng_r:  -mabi=lp64   -std=c++03   -L/home/amptest/ampere_spec2017/gcc/install/lib64   -L/home/amptest/ampere_spec2017/gcc/install/lib   -L/home/amptest/ampere_spec2017/jemalloc/install/lib   -g   -Ofast   -mcpu=neoverse-n1   -funroll-loops   -flto=32   --param early-inlining-insns=256   --param max-inline-insns-auto=128   --param inline-unit-growth=256   -ffinite-loops   -ljemalloc 
541.leela_r:  Same as 520.omnetpp_r 

Fortran benchmarks:

548.exchange2_r:  basepeak = yes 

Peak Other Flags

C benchmarks (except as noted below):

 -Wl,-Map,mapfile 
525.x264_r:  -fcommon   -Wl,-Map,mapfile 
557.xz_r:  -w   -Wl,-Map,mapfile 

C++ benchmarks:

 -Wl,-Map,mapfile 

Fortran benchmarks:

 -Wl,-Map,mapfile 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/gcc.2021-07-21.html,
http://www.spec.org/cpu2017/flags/Supermicro-Platform-Settings-V1.2-Ampere-revD.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/gcc.2021-07-21.xml,
http://www.spec.org/cpu2017/flags/Supermicro-Platform-Settings-V1.2-Ampere-revD.xml.