SPEC CPU®2017 Floating Point Rate Result

Copyright 2017-2022 Standard Performance Evaluation Corporation

Tyrone Systems (Test Sponsor: Netweb Pte Ltd)

Tyrone Camarero SDI100A3U-212
(2.40 GHz,Intel Xeon Platinum 8360Y)

SPECrate®2017_fp_base = 47000

SPECrate®2017_fp_peak = 48700

CPU2017 License: 006042 Test Date: Sep-2022
Test Sponsor: Netweb Pte Ltd Hardware Availability: Jun-2021
Tested by: Tyrone Systems Software Availability: May-2022

Benchmark result graphs are available in the PDF report.

Hardware
CPU Name: Intel Xeon Platinum 8360Y
  Max MHz: 3500
  Nominal: 2400
Enabled: 72 cores, 2 chips, 2 threads/core
Orderable: 1,2 chips
Cache L1: 32 KB I + 48 KB D on chip per core
  L2: 1.25 MB I+D on chip per core
  L3: 54 MB I+D on chip per chip
  Other: None
Memory: 1 TB (16 x 64 GB 2Rx4 PC4-3200AA-R)
Storage: 1 x 512 GB NVMe SSD
Other: None
Software
OS: Red Hat Enterprise Linux release 8.5 (Ootpa)
4.18.0-348.el8.x86_64
Compiler: C/C++: Version 2022.1 of Intel oneAPI DPC++/C++
Compiler for Linux;
Fortran: Version 2022.1 of Intel Fortran Compiler
for Linux;
Parallel: No
Firmware: Version 1.2a released May-2022
File System: xfs
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: 64-bit
Other: jemalloc memory allocator V5.0.1
Power Management: BIOS and OS set to prefer performance at the
cost of additional power usage..

Results Table

Benchmark Base Peak
Copies Seconds Ratio Seconds Ratio Seconds Ratio Copies Seconds Ratio Seconds Ratio Seconds Ratio
SPECrate®2017_fp_base 47000
SPECrate®2017_fp_peak 48700
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
503.bwaves_r 144 681 2120 682 2120 680 2120 144 681 2120 682 2120 680 2120
507.cactuBSSN_r 144 308 591 309 591 307 594 72 149 611 148 614 149 612
508.namd_r 144 432 317 430 318 431 317 144 432 317 430 318 431 317
510.parest_r 144 1813 208 1818 207 1813 208 72 710 265 709 266 713 264
511.povray_r 144 677 497 677 497 676 497 144 633 531 634 530 636 529
519.lbm_r 144 563 270 563 270 564 269 144 563 270 563 270 564 269
521.wrf_r 144 919 351 936 344 921 350 72 432 374 432 373 436 370
526.blender_r 144 445 493 444 494 444 494 144 445 493 444 494 444 494
527.cam4_r 144 503 501 503 501 500 503 72 270 467 269 467 269 468
538.imagick_r 144 283 1270 283 1260 281 1270 144 283 1270 283 1260 281 1270
544.nab_r 144 342 709 342 708 344 705 144 342 709 342 708 344 705
549.fotonik3d_r 144 1567 358 1598 351 1564 359 144 1567 358 1598 351 1564 359
554.roms_r 144 1338 171 1292 177 1291 177 72 566 202 564 203 564 203

Submit Notes

 The numactl mechanism was used to bind copies to processors. The config file option 'submit'
 was used to generate numactl commands to bind each copy to a specific processor.
 For details, please see the config file.

Operating System Notes

 Stack size set to unlimited using "ulimit -s unlimited"

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH = "/home/cpu2017/lib/intel64:/home/cpu2017/je5.0.1-64"
MALLOC_CONF = "retain:true"

General Notes

 Binaries compiled on a system with 2x Intel Xeon Platinum 8280M CPU + 384GB RAM
 memory using Red Hat Enterprise Linux 8.4
 Transparent Huge Pages enabled by default
 Prior to runcpu invocation
 Filesystem page cache synced and cleared with:
 sync; echo 3>       /proc/sys/vm/drop_caches
 runcpu command invoked through numactl i.e.:
 numactl --interleave=all runcpu <etc>
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the
system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the
system as tested and documented.
NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the
system as tested and documented.
 jemalloc, a general purpose malloc implementation
 built with the RedHat Enterprise 7.5, and the system compiler gcc 4.8.5
 sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases

Platform Notes

BIOS Settings:
Power Technology = Custom
ENERGY_PERF_BIAS_CFG mode = Maximum Performance
SNC (Sub NUMA)= Enable
KTI Prefetch= Enable
LLC Dead Line Alloc = Disable
Hyper-Threading = Enabled

 Sysinfo program /home/cpu2017/bin/sysinfo
 Rev: r6622 of 2021-04-07 982a61ec0915b55891ef0e16acafc64d
 running on icelake2 Wed Sep  7 03:52:08 2022

 SUT (System Under Test) info as seen by some common utilities.
 For more information on this section, see
    https://www.spec.org/cpu2017/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : Intel(R) Xeon(R) Platinum 8360Y CPU @ 2.40GHz
       2  "physical id"s (chips)
       144 "processors"
    cores, siblings (Caution: counting these is hw and system dependent. The following
    excerpts from /proc/cpuinfo might not be reliable.  Use with caution.)
       cpu cores : 36
       siblings  : 72
       physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
       25 26 27 28 29 30 31 32 33 34 35
       physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
       25 26 27 28 29 30 31 32 33 34 35

 From lscpu from util-linux 2.32.1:
      Architecture:        x86_64
      CPU op-mode(s):      32-bit, 64-bit
      Byte Order:          Little Endian
      CPU(s):              144
      On-line CPU(s) list: 0-143
      Thread(s) per core:  2
      Core(s) per socket:  36
      Socket(s):           2
      NUMA node(s):        4
      Vendor ID:           GenuineIntel
      BIOS Vendor ID:      Intel(R) Corporation
      CPU family:          6
      Model:               106
      Model name:          Intel(R) Xeon(R) Platinum 8360Y CPU @ 2.40GHz
      BIOS Model name:     Intel(R) Xeon(R) Platinum 8360Y CPU @ 2.40GHz
      Stepping:            6
      CPU MHz:             2400.000
      BogoMIPS:            4800.00
      Virtualization:      VT-x
      L1d cache:           48K
      L1i cache:           32K
      L2 cache:            1280K
      L3 cache:            55296K
      NUMA node0 CPU(s):   0-17,72-89
      NUMA node1 CPU(s):   18-35,90-107
      NUMA node2 CPU(s):   36-53,108-125
      NUMA node3 CPU(s):   54-71,126-143
      Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
      pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp
      lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid
      aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16
      xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave
      avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 invpcid_single
      intel_ppin ssbd mba ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept
      vpid ept_ad fsgsbase tsc_adjust sgx bmi1 hle avx2 smep bmi2 erms invpcid cqm rdt_a
      avx512f avx512dq rdseed adx smap avx512ifma clflushopt clwb intel_pt avx512cd sha_ni
      avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total
      cqm_mbm_local split_lock_detect wbnoinvd dtherm ida arat pln pts avx512vbmi umip pku
      ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg tme
      avx512_vpopcntdq la57 rdpid sgx_lc fsrm md_clear pconfig flush_l1d arch_capabilities

 /proc/cpuinfo cache data
    cache size : 55296 KB

 From numactl --hardware
 WARNING: a numactl 'node' might or might not correspond to a physical chip.
   available: 4 nodes (0-3)
   node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 72 73 74 75 76 77 78 79 80 81
   82 83 84 85 86 87 88 89
   node 0 size: 257629 MB
   node 0 free: 240859 MB
   node 1 cpus: 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 90 91 92 93 94 95 96
   97 98 99 100 101 102 103 104 105 106 107
   node 1 size: 258002 MB
   node 1 free: 243369 MB
   node 2 cpus: 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 108 109 110 111 112
   113 114 115 116 117 118 119 120 121 122 123 124 125
   node 2 size: 258040 MB
   node 2 free: 243587 MB
   node 3 cpus: 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 126 127 128 129 130
   131 132 133 134 135 136 137 138 139 140 141 142 143
   node 3 size: 258035 MB
   node 3 free: 243615 MB
   node distances:
   node   0   1   2   3
     0:  10  11  20  20
     1:  11  10  20  20
     2:  20  20  10  11
     3:  20  20  11  10

 From /proc/meminfo
    MemTotal:       1056468552 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 /sbin/tuned-adm active
     Current active profile: throughput-performance

 From /etc/*release* /etc/*version*
    os-release:
       NAME="Red Hat Enterprise Linux"
       VERSION="8.5 (Ootpa)"
       ID="rhel"
       ID_LIKE="fedora"
       VERSION_ID="8.5"
       PLATFORM_ID="platform:el8"
       PRETTY_NAME="Red Hat Enterprise Linux 8.5 (Ootpa)"
       ANSI_COLOR="0;31"
    redhat-release: Red Hat Enterprise Linux release 8.5 (Ootpa)
    system-release: Red Hat Enterprise Linux release 8.5 (Ootpa)
    system-release-cpe: cpe:/o:redhat:enterprise_linux:8::baseos

 uname -a:
    Linux icelake2 4.18.0-348.el8.x86_64 #1 SMP Mon Oct 4 12:17:22 EDT 2021 x86_64 x86_64
    x86_64 GNU/Linux

 Kernel self-reported vulnerability status:

 CVE-2018-12207 (iTLB Multihit):                        Not affected
 CVE-2018-3620 (L1 Terminal Fault):                     Not affected
 Microarchitectural Data Sampling:                      Not affected
 CVE-2017-5754 (Meltdown):                              Not affected
 CVE-2018-3639 (Speculative Store Bypass):              Mitigation: Speculative Store
                                                        Bypass disabled via prctl and
                                                        seccomp
 CVE-2017-5753 (Spectre variant 1):                     Mitigation: usercopy/swapgs
                                                        barriers and __user pointer
                                                        sanitization
 CVE-2017-5715 (Spectre variant 2):                     Mitigation: Enhanced IBRS, IBPB:
                                                        conditional, RSB filling
 CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected
 CVE-2019-11135 (TSX Asynchronous Abort):               Not affected

 run-level 3 Sep 6 19:02

 SPEC is set to: /home/cpu2017
    Filesystem            Type  Size  Used Avail Use% Mounted on
    /dev/mapper/rhel-home xfs   402G  150G  252G  38% /home

 From /sys/devices/virtual/dmi/id
     Vendor:         Tyrone Systems
     Product:        Tyrone Camarero SDI100A3U-212
     Product Family: SMC X12

 Additional information from dmidecode 3.2 follows.  WARNING: Use caution when you
 interpret this section. The 'dmidecode' program reads system data which is "intended to
 allow hardware to be accurately determined", but the intent may not be met, as there are
 frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
   Memory:
     16x Samsung M393A8G40AB2-CWE 64 GB 2 rank 3200

 BIOS:
    BIOS Vendor:       American Megatrends International, LLC.
    BIOS Version:      1.2a
    BIOS Date:         05/12/2022
    BIOS Revision:     5.22

 (End of data from sysinfo program)

Compiler Version Notes

==============================================================================
C               | 519.lbm_r(base, peak) 538.imagick_r(base, peak)
                | 544.nab_r(base, peak)
------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
C++             | 508.namd_r(base, peak) 510.parest_r(base, peak)
------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
C++, C          | 511.povray_r(base, peak) 526.blender_r(base, peak)
------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
C++, C, Fortran | 507.cactuBSSN_r(base, peak)
------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
Intel(R) Fortran Compiler for applications running on Intel(R) 64, Version
  2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
Fortran         | 503.bwaves_r(base, peak) 549.fotonik3d_r(base, peak)
                | 554.roms_r(base, peak)
------------------------------------------------------------------------------
Intel(R) Fortran Compiler for applications running on Intel(R) 64, Version
  2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
Fortran, C      | 521.wrf_r(base, peak) 527.cam4_r(base, peak)
------------------------------------------------------------------------------
Intel(R) Fortran Compiler for applications running on Intel(R) 64, Version
  2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 icx 

C++ benchmarks:

 icpx 

Fortran benchmarks:

 ifx 

Benchmarks using both Fortran and C:

 ifx   icx 

Benchmarks using both C and C++:

 icpx   icx 

Benchmarks using Fortran, C, and C++:

 icpx   icx   ifx 

Base Portability Flags

503.bwaves_r:  -DSPEC_LP64 
507.cactuBSSN_r:  -DSPEC_LP64 
508.namd_r:  -DSPEC_LP64 
510.parest_r:  -DSPEC_LP64 
511.povray_r:  -DSPEC_LP64 
519.lbm_r:  -DSPEC_LP64 
521.wrf_r:  -DSPEC_LP64   -DSPEC_CASE_FLAG   -convert big_endian 
526.blender_r:  -DSPEC_LP64   -DSPEC_LINUX   -funsigned-char 
527.cam4_r:  -DSPEC_LP64   -DSPEC_CASE_FLAG 
538.imagick_r:  -DSPEC_LP64 
544.nab_r:  -DSPEC_LP64 
549.fotonik3d_r:  -DSPEC_LP64 
554.roms_r:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -w   -std=c11   -m64   -Wl,-z,muldefs   -xCORE-AVX2   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

C++ benchmarks:

 -w   -m64   -Wl,-z,muldefs   -xCORE-AVX2   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Fortran benchmarks:

 -w   -m64   -Wl,-z,muldefs   -xCORE-AVX2   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -auto   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Benchmarks using both Fortran and C:

 -w   -m64   -std=c11   -Wl,-z,muldefs   -xCORE-AVX2   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -auto   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Benchmarks using both C and C++:

 -w   -m64   -std=c11   -Wl,-z,muldefs   -xCORE-AVX2   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Benchmarks using Fortran, C, and C++:

 -w   -m64   -std=c11   -Wl,-z,muldefs   -xCORE-AVX2   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -auto   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Peak Compiler Invocation

C benchmarks:

 icx 

C++ benchmarks:

 icpx 

Fortran benchmarks:

 ifx 

Benchmarks using both Fortran and C:

 ifx   icx 

Benchmarks using both C and C++:

 icpx   icx 

Benchmarks using Fortran, C, and C++:

 icpx   icx   ifx 

Peak Portability Flags

Same as Base Portability Flags

Peak Optimization Flags

C benchmarks:

519.lbm_r:  basepeak = yes 
538.imagick_r:  basepeak = yes 
544.nab_r:  basepeak = yes 

C++ benchmarks:

508.namd_r:  basepeak = yes 
510.parest_r:  -w   -m64   -Wl,-z,muldefs   -xCORE-AVX2   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Fortran benchmarks:

503.bwaves_r:  basepeak = yes 
549.fotonik3d_r:  basepeak = yes 
554.roms_r:  -w   -m64   -Wl,-z,muldefs   -xCORE-AVX2   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -auto   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Benchmarks using both Fortran and C:

 -w   -m64   -std=c11   -Wl,-z,muldefs   -xCORE-AVX2   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -auto   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Benchmarks using both C and C++:

511.povray_r:  -w   -m64   -std=c11   -Wl,-z,muldefs   -fprofile-generate(pass 1)   -fprofile-use=default.profdata(pass 2)   -xCORE-AVX2   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 
526.blender_r:  basepeak = yes 

Benchmarks using Fortran, C, and C++:

 -w   -m64   -std=c11   -Wl,-z,muldefs   -xCORE-AVX2   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -auto   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/Intel-ic2022-official-linux64_revA.html,
http://www.spec.org/cpu2017/flags/Tyrone-Platform-Settings-V1.2-ICX-revA.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/Intel-ic2022-official-linux64_revA.xml,
http://www.spec.org/cpu2017/flags/Tyrone-Platform-Settings-V1.2-ICX-revA.xml.