SPEC CPU®2017 Integer Speed Result

Copyright 2017-2022 Standard Performance Evaluation Corporation

Fujitsu

PRIMERGY TX1330 M5, Intel Xeon E-2388G, 3.20GHz

SPECspeed®2017_int_base = 14.60

SPECspeed®2017_int_energy_base = 27700

SPECspeed®2017_int_peak = Not Run

SPECspeed®2017_int_energy_peak = Not Run

CPU2017 License: 19 Test Date: Dec-2021
Test Sponsor: Fujitsu Hardware Availability: Mar-2022
Tested by: Fujitsu Software Availability: Jun-2021

Benchmark result graphs are available in the PDF report.

Hardware
CPU Name: Intel Xeon E-2388G
  Max MHz: 5100
  Nominal: 3200
Enabled: 8 cores, 1 chip, 2 threads/core
Orderable: 1 chip
Cache L1: 32 KB I + 48 KB D on chip per core
  L2: 512 KB I+D on chip per core
  L3: 16 MB I+D on chip per chip
  Other: None
Memory: 32 GB (2 x 16 GB 2Rx8 PC4-3200AA-E, running at
2933)
Storage: 1 x SATA M.2 SSD, 240GB
Other: None
Software
OS: SUSE Linux Enterprise Server 15 SP3
5.3.18-57-default
Compiler: C/C++: Version 2021.1 of Intel oneAPI DPC++/C++
Compiler Build 20201113 for Linux;
Fortran: Version 2021.1 of Intel Fortran Compiler
Classic Build 20201112 for Linux;
Parallel: Yes
Firmware: Fujitsu BIOS Version V5.0.0.22 R1.30.0 for
D3931-A1x. Released Mar-2022
tested as V5.0.0.22 R1.15.0 for D3931-A1x Dec-2021
File System: xfs
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: Not Applicable
Other: jemalloc memory allocator V5.0.1
Power Management: BIOS and OS set to prefer performance
at the cost of additional power usage.
Power
Max. Power (W): 174.03
Idle Power (W): 28.02
Min. Temperature (C): 26.94
Elevation (m): 11
Line Standard: 200 V / 50 Hz / 1 phase / 2 wires
Provisioning: Line-powered
Power Settings
Management FW: Version 1.00m for D3931-A1x of Fujitsu BMC
Firmware
Memory Mode: Normal
Power-Relevant Hardware
Power Supply: 1 x 500 W (non-redundant)
  Details: Standard power supply part of base unit
S26113-E627-V50-1
Backplane: 4 x 2.5inch HDD back plane
Other Storage: Embedded SATA Controller
Storage Model #s: S26361-F5787-E240
NICs Installed: 2 x Intel I210 @ 1 Gb
NICs Enabled (FW/OS): 2 / 2
NICs Connected/Speed: 1 @ 1 Gb
Other HW Model #s: None
Power Analyzer
Power Analyzer: 10.26.120.153:8888
Hardware Vendor: Hioki
Model: Hioki PW3336:1-Channel
Serial Number: 170130930
Input Connection: USB via USB-Serial CH340
Metrology Institute: NICT
Calibration By: HIOKI E.E. CORPORATION
Calibration Label: H06400086
Calibration Date: 08-Mar-2021
PTDaemon® Version: 1.9.2 (3976349f; 2020-12-08)
Setup Description: Connected to PSU 1
Current Ranges Used: 1A
Voltage Range Used: 300V
Temperature Meter
Temperature Meter: 10.26.120.153:8889
Hardware Vendor: Digi International Inc.
Model: DigiWATCHPORT_H
Serial Number: W 633 91704
Input Connection: USB
PTDaemon Version: 1.9.2 (3976349f; 2020-12-08)
Setup Description: 5 mm in front of SUT main air intake

Base Results Table

Benchmark Threads Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
SPECspeed®2017_int_base 14.60
SPECspeed®2017_int_energy_base 27700
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
600.perlbench_s 16 1930 9.19 10.90 177 56.4 58.3 1940 9.17 11.00 175 56.7 58.5 1930 9.20 11.00 176 56.8 58.5
602.gcc_s 16 2750 14.50 14.70 295 53.4 56.0 2740 14.50 14.70 295 53.6 56.5 2750 14.50 14.70 295 53.5 57.0
605.mcf_s 16 1760 26.80 9.55 539 54.2 58.2 1760 26.80 9.54 540 54.2 57.3 1760 26.80 9.55 540 54.2 57.7
620.omnetpp_s 16 1620 10.10 7.74 229 47.7 49.4 1620 10.10 7.74 229 47.7 49.2 1630 10.00 7.77 228 47.7 49.2
623.xalancbmk_s 16 76.4 18.60 4.11 374 53.8 58.0 75.7 18.70 4.07 378 53.8 58.0 75.6 18.70 4.07 378 53.9 58.1
625.x264_s 16 75.8 23.30 4.24 452 55.9 56.8 75.8 23.30 4.23 454 55.8 56.8 75.8 23.30 4.22 454 55.7 56.5
631.deepsjeng_s 16 1810 7.92 9.97 156 55.1 56.2 1810 7.92 9.97 156 55.1 56.5 1810 7.92 9.92 157 54.9 55.9
641.leela_s 16 2640 6.46 14.20 130 53.6 54.3 2640 6.45 14.20 130 53.7 54.8 2640 6.46 14.10 131 53.3 54.4
648.exchange2_s 16 1080 27.30 6.03 530 55.9 57.0 1080 27.30 6.02 532 55.9 57.1 1070 27.40 6.00 533 55.9 56.8
657.xz_s 16 3170 19.50 30.70 219 97.1 1730 3160 19.50 30.70 219 97.2 1730 3160 19.50 30.80 218 97.4 1740

Operating System Notes

 Stack size set to unlimited using "ulimit -s unlimited"

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
KMP_AFFINITY = "granularity=fine,scatter"
LD_LIBRARY_PATH =
     "/home/PVT/speccpu-1.1.8_b/lib/intel64:/home/PVT/speccpu-1.1.8_b/je5.0.1
     -64"
MALLOC_CONF = "retain:true"
OMP_STACKSIZE = "192M"

General Notes

 Binaries compiled on a system with 1x Intel Core i9-7980XE CPU + 64GB RAM
 memory using Redhat Enterprise Linux 8.0
 Transparent Huge Pages enabled by default
 Prior to runcpu invocation
 Filesystem page cache synced and cleared with:
 sync; echo 3>       /proc/sys/vm/drop_caches
 NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown)
 is mitigated in the system as tested and documented.
 Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1)
 is mitigated in the system as tested and documented.
 Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
 is mitigated in the system as tested and documented.
 jemalloc, a general purpose malloc implementation
 built with the RedHat Enterprise 7.5, and the system compiler gcc 4.8.5
 sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases

Platform Notes

 BIOS configuration:
 Energy Efficient Turbo = Disabled
 SA GV High Gear = Gear1

 Sysinfo program /home/PVT/speccpu-1.1.8_b/bin/sysinfo
 Rev: r6622 of 2021-04-07 982a61ec0915b55891ef0e16acafc64d
 running on localhost Sat Dec 18 14:19:55 2021

 SUT (System Under Test) info as seen by some common utilities.
 For more information on this section, see
    https://www.spec.org/cpu2017/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : Intel(R) Xeon(R) E-2388G CPU @ 3.20GHz
       1  "physical id"s (chips)
       16 "processors"
    cores, siblings (Caution: counting these is hw and system dependent. The following
    excerpts from /proc/cpuinfo might not be reliable.  Use with caution.)
       cpu cores : 8
       siblings  : 16
       physical 0: cores 0 1 2 3 4 5 6 7

 From lscpu from util-linux 2.36.2:
      Architecture:                    x86_64
      CPU op-mode(s):                  32-bit, 64-bit
      Byte Order:                      Little Endian
      Address sizes:                   39 bits physical, 48 bits virtual
      CPU(s):                          16
      On-line CPU(s) list:             0-15
      Thread(s) per core:              2
      Core(s) per socket:              8
      Socket(s):                       1
      NUMA node(s):                    1
      Vendor ID:                       GenuineIntel
      CPU family:                      6
      Model:                           167
      Model name:                      Intel(R) Xeon(R) E-2388G CPU @ 3.20GHz
      Stepping:                        1
      CPU MHz:                         1032.760
      CPU max MHz:                     5100.0000
      CPU min MHz:                     800.0000
      BogoMIPS:                        6384.00
      Virtualization:                  VT-x
      L1d cache:                       384 KiB
      L1i cache:                       256 KiB
      L2 cache:                        4 MiB
      L3 cache:                        16 MiB
      NUMA node0 CPU(s):               0-15
      Vulnerability Itlb multihit:     Not affected
      Vulnerability L1tf:              Not affected
      Vulnerability Mds:               Not affected
      Vulnerability Meltdown:          Not affected
      Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via
      prctl and seccomp
      Vulnerability Spectre v1:        Mitigation; usercopy/swapgs barriers and __user
      pointer sanitization
      Vulnerability Spectre v2:        Mitigation; Enhanced IBRS, IBPB conditional, RSB
      filling
      Vulnerability Srbds:             Not affected
      Vulnerability Tsx async abort:   Not affected
      Flags:                           fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
      pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx
      pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology
      nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx
      smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt
      tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault
      epb invpcid_single ssbd ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority
      ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx avx512f
      avx512dq rdseed adx smap avx512ifma clflushopt intel_pt avx512cd sha_ni avx512bw
      avx512vl xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify
      hwp_act_window hwp_epp hwp_pkg_req avx512vbmi umip pku ospke avx512_vbmi2 gfni vaes
      vpclmulqdq avx512_vnni avx512_bitalg avx512_vpopcntdq rdpid fsrm md_clear flush_l1d
      arch_capabilities

 From lscpu --cache:
      NAME ONE-SIZE ALL-SIZE WAYS TYPE        LEVEL  SETS PHY-LINE COHERENCY-SIZE
      L1d       48K     384K   12 Data            1    64        1             64
      L1i       32K     256K    8 Instruction     1    64        1             64
      L2       512K       4M    8 Unified         2  1024        1             64
      L3        16M      16M   16 Unified         3 16384        1             64

 /proc/cpuinfo cache data
    cache size : 16384 KB

 From numactl --hardware
 WARNING: a numactl 'node' might or might not correspond to a physical chip.
   available: 1 nodes (0)
   node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
   node 0 size: 31514 MB
   node 0 free: 31038 MB
   node distances:
   node   0
     0:  10

 From /proc/meminfo
    MemTotal:       32270472 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has
    powersave

 From /etc/*release* /etc/*version*
    os-release:
       NAME="SLES"
       VERSION="15-SP3"
       VERSION_ID="15.3"
       PRETTY_NAME="SUSE Linux Enterprise Server 15 SP3"
       ID="sles"
       ID_LIKE="suse"
       ANSI_COLOR="0;32"
       CPE_NAME="cpe:/o:suse:sles:15:sp3"

 uname -a:
    Linux localhost 5.3.18-57-default #1 SMP Wed Apr 28 10:54:41 UTC 2021
    (ba3c2e9/lp-5d9e8aa) x86_64 x86_64 x86_64 GNU/Linux

 Kernel self-reported vulnerability status:

 CVE-2018-12207 (iTLB Multihit):                        Not affected
 CVE-2018-3620 (L1 Terminal Fault):                     Not affected
 Microarchitectural Data Sampling:                      Not affected
 CVE-2017-5754 (Meltdown):                              Not affected
 CVE-2018-3639 (Speculative Store Bypass):              Mitigation: Speculative Store
                                                        Bypass disabled via prctl and
                                                        seccomp
 CVE-2017-5753 (Spectre variant 1):                     Mitigation: usercopy/swapgs
                                                        barriers and __user pointer
                                                        sanitization
 CVE-2017-5715 (Spectre variant 2):                     Mitigation: Enhanced IBRS, IBPB:
                                                        conditional, RSB filling
 CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected
 CVE-2019-11135 (TSX Asynchronous Abort):               Not affected

 run-level 3 Dec 18 13:39

 SPEC is set to: /home/PVT/speccpu-1.1.8_b
    Filesystem     Type  Size  Used Avail Use% Mounted on
    /dev/sda4      xfs   180G   41G  140G  23% /home

 From /sys/devices/virtual/dmi/id
     Vendor:         FUJITSU
     Product:        PRIMERGY TX1330 M5
     Product Family: SERVER
     Serial:         EWBUxxxxxx

 Additional information from dmidecode 3.2 follows.  WARNING: Use caution when you
 interpret this section. The 'dmidecode' program reads system data which is "intended to
 allow hardware to be accurately determined", but the intent may not be met, as there are
 frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
   Memory:
     2x Samsung M391A2K43DB1-CWE 16 GB 2 rank 3200, configured at 2933

 BIOS:
    BIOS Vendor:       FUJITSU // American Megatrends International, LLC.
    BIOS Version:      V5.0.0.22 R1.15.0 for D3931-A1x
    BIOS Date:         12/03/2021
    BIOS Revision:     1.15

 (End of data from sysinfo program)

Compiler Version Notes

==============================================================================
C       | 600.perlbench_s(base) 602.gcc_s(base) 605.mcf_s(base)
        | 625.x264_s(base) 657.xz_s(base)
------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2021.1 Build 20201113
Copyright (C) 1985-2020 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
C++     | 620.omnetpp_s(base) 623.xalancbmk_s(base) 631.deepsjeng_s(base)
        | 641.leela_s(base)
------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2021.1 Build 20201113
Copyright (C) 1985-2020 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
Fortran | 648.exchange2_s(base)
------------------------------------------------------------------------------
Intel(R) Fortran Intel(R) 64 Compiler Classic for applications running on
  Intel(R) 64, Version 2021.1 Build 20201112_000000
Copyright (C) 1985-2020 Intel Corporation.  All rights reserved.
------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 icx 

C++ benchmarks:

 icpx 

Fortran benchmarks:

 ifort 

Base Portability Flags

600.perlbench_s:  -DSPEC_LP64   -DSPEC_LINUX_X64 
602.gcc_s:  -DSPEC_LP64 
605.mcf_s:  -DSPEC_LP64 
620.omnetpp_s:  -DSPEC_LP64 
623.xalancbmk_s:  -DSPEC_LP64   -DSPEC_LINUX 
625.x264_s:  -DSPEC_LP64 
631.deepsjeng_s:  -DSPEC_LP64 
641.leela_s:  -DSPEC_LP64 
648.exchange2_s:  -DSPEC_LP64 
657.xz_s:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -DSPEC_OPENMP   -std=c11   -m64   -fiopenmp   -Wl,-z,muldefs   -xCORE-AVX2   -O3   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -mbranches-within-32B-boundaries   -L/usr/local/jemalloc64-5.0.1/lib   -ljemalloc 

C++ benchmarks:

 -DSPEC_OPENMP   -m64   -Wl,-z,muldefs   -xCORE-AVX2   -O3   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -mbranches-within-32B-boundaries   -L/opt/intel/oneapi/compiler/2021.1.1/linux/compiler/lib/intel64_lin/   -lqkmalloc 

Fortran benchmarks:

 -m64   -xCORE-AVX2   -O3   -ipo   -no-prec-div   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -auto   -mbranches-within-32B-boundaries 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/Fujitsu-Platform-Settings-V1.0-RKL-RevC.html,
http://www.spec.org/cpu2017/flags/Intel-ic2021-official-linux64_revA.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/Fujitsu-Platform-Settings-V1.0-RKL-RevC.xml,
http://www.spec.org/cpu2017/flags/Intel-ic2021-official-linux64_revA.xml.