SPEC CPU(R)2017 Integer Rate Result GIGA-BYTE TECHNOLOGY CO., LTD. R272-P30-00 (Ampere Altra Q80-33 3.0 GHz) CPU2017 License: 9082 Test date: Jul-2021 Test sponsor: GIGA-BYTE TECHNOLOGY CO., LTD. Hardware availability: Jun-2021 Tested by: GIGA-BYTE TECHNOLOGY CO., LTD. Software availability: Jun-2021 Base Base Base Peak Peak Peak Benchmarks Copies Run Time Rate Copies Run Time Rate --------------- ------- --------- --------- ------- --------- --------- 500.perlbench_r 80 395 323 * 80 367 347 S 500.perlbench_r 80 396 321 S 80 364 350 S 500.perlbench_r 80 393 324 S 80 365 349 * 502.gcc_r 80 557 203 S 80 536 211 S 502.gcc_r 80 554 204 S 80 539 210 * 502.gcc_r 80 555 204 * 80 541 210 S 505.mcf_r 80 1137 114 S 80 1141 113 S 505.mcf_r 80 1138 114 S 80 1140 113 S 505.mcf_r 80 1137 114 * 80 1141 113 * 520.omnetpp_r 80 772 136 * 80 752 140 S 520.omnetpp_r 80 771 136 S 80 751 140 * 520.omnetpp_r 80 773 136 S 80 751 140 S 523.xalancbmk_r 80 317 266 S 80 313 270 * 523.xalancbmk_r 80 315 268 * 80 312 271 S 523.xalancbmk_r 80 314 269 S 80 313 270 S 525.x264_r 80 177 790 S 80 177 791 S 525.x264_r 80 177 791 * 80 177 792 S 525.x264_r 80 177 793 S 80 177 792 * 531.deepsjeng_r 80 231 396 S 80 230 398 S 531.deepsjeng_r 80 231 396 * 80 230 398 S 531.deepsjeng_r 80 231 396 S 80 230 398 * 541.leela_r 80 326 406 S 80 323 410 S 541.leela_r 80 326 406 * 80 323 410 * 541.leela_r 80 327 406 S 80 323 411 S 548.exchange2_r 80 211 991 S 80 211 991 S 548.exchange2_r 80 212 991 S 80 212 991 S 548.exchange2_r 80 211 991 * 80 211 991 * 557.xz_r 80 499 173 S 80 495 175 S 557.xz_r 80 499 173 * 80 491 176 S 557.xz_r 80 500 173 S 80 495 175 * ================================================================================= 500.perlbench_r 80 395 323 * 80 365 349 * 502.gcc_r 80 555 204 * 80 539 210 * 505.mcf_r 80 1137 114 * 80 1141 113 * 520.omnetpp_r 80 772 136 * 80 751 140 * 523.xalancbmk_r 80 315 268 * 80 313 270 * 525.x264_r 80 177 791 * 80 177 792 * 531.deepsjeng_r 80 231 396 * 80 230 398 * 541.leela_r 80 326 406 * 80 323 410 * 548.exchange2_r 80 211 991 * 80 211 991 * 557.xz_r 80 499 173 * 80 495 175 * SPECrate(R)2017_int_base 300 SPECrate(R)2017_int_peak 305 HARDWARE -------- CPU Name: Ampere Altra Q80-33 Max MHz: 3300 Nominal: 3000 Enabled: 80 cores, 1 chip Orderable: 1 chips Cache L1: 64 KB I + 64 KB D on chip per core L2: 1 MB I+D on chip per core L3: 32 MB I+D on chip per chip Other: None Memory: 256 GB (8 x 32 GB 2Rx4 PC4-3200AA-R) Storage: 819 GB, NVME , M.2 , PCIe Gen 3 Other: None SOFTWARE -------- OS: CentOS Linux release 8.4.2105 4.18.0-305.7.1.el8_4.aarch64 Compiler: C/C++/Fortran: Version 10.2.1 of Ampere GCC Parallel: No Firmware: Version F16e released Jun-2021 File System: xfs System State: Run level 3 (multi-user) Base Pointers: 64-bit Peak Pointers: 64-bit Other: Jemalloc memory allocator library v5.2.1 Power Management: OS set to prefer performance at the cost of additional power usage Compiler Notes -------------- Binaries were compiled on a system with 2x Ampere Altra Q80-33 CPU chips + 256 GB memory using CentOS 8.4 Ampere GCC 10.2.1 is available via https://github.com/AmpereComputing/ampere-gcc/releases Submit Notes ------------ The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. Operating System Notes ---------------------- 'ulimit -s unlimited' was used to set environment stack size Set dirty_ratio=8 to limit dirty cache to 8% of memory i.e. echo 8 | sudo tee /proc/sys/vm/dirty_ratio Set swappiness=1 to swap only if necessary i.e. echo 1 | sudo tee /proc/sys/vm/swappiness Set zone_reclaim_mode=1 to free local node memory and avoid remote memory i.e. echo 1 | sudo tee /proc/sys/vm/zone_reclaim_mode Set drop_caches=3 to reset caches before invoking runcpu i.e. echo 3 | sudo tee /proc/sys/vm/drop_caches Set numa_balancing=0 to disable automatic numa balancing i.e. echo 0 | sudo tee /proc/sys/kernel/numa_balancing Switch off all ktune and tuned settings i.e. sudo tuned-adm off Transparent huge pages set to 'never' i.e. sudo bash -c "echo never > /sys/kernel/mm/transparent_hugepage/enabled" runcpu command invoked through numactl i.e. numactl --interleave=0-3 run intrate Environment Variables Notes --------------------------- Environment variables set by runcpu before the start of the run: LD_LIBRARY_PATH = "/home/amptest/ampere_spec2017/jemalloc/install/lib:/home/amptest/ampere _spec2017/gcc/install/lib64/:/home/amptest/ampere_spec2017/gcc/install/l ib/:/home/ampere_spec2017/gcc/install/lib64:/home/ampere_spec2017/jemall oc/install/lib:" General Notes ------------- Jemalloc v5.2.1 is available via https://github.com/jemalloc/jemalloc/releases/download/5.2.1/jemalloc-5.2.1.tar.bz2 It was built on CentOS 8.3 using Version 10.2.1 of Ampere GCC with configure options --prefix=/home/amptest/jemalloc/install --with-lg-quantum=3 NA: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Platform Notes -------------- BIOS settings: Chipset > ANC Mode > Quadrant Sysinfo program /home/ampere_spec2017/spec2017/bin/sysinfo Rev: r6538 of 2020-09-24 e8664e66d2d7080afeaa89d4b38e2f1c running on localhost.localdomain Mon Jul 5 09:37:34 2021 SUT (System Under Test) info as seen by some common utilities. For more information on this section, see https://www.spec.org/cpu2017/Docs/config.html#sysinfo From /proc/cpuinfo * * Did not identify cpu model. If you would * like to write your own sysinfo program, see * www.spec.org/cpu2017/config.html#sysinfo * * * 0 "physical id" tags found. Perhaps this is an older system, * or a virtualized system. Not attempting to guess how to * count chips/cores for this system. * 80 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) From lscpu: Architecture: aarch64 Byte Order: Little Endian CPU(s): 80 On-line CPU(s) list: 0-79 Thread(s) per core: 1 Core(s) per socket: 80 Socket(s): 1 NUMA node(s): 4 Vendor ID: ARM BIOS Vendor ID: Ampere(R) Model: 1 Model name: Neoverse-N1 BIOS Model name: Ampere(R) Altra(R) Processor Stepping: r3p1 CPU max MHz: 3300.0000 CPU min MHz: 1000.0000 BogoMIPS: 50.00 L1d cache: 64K L1i cache: 64K L2 cache: 1024K NUMA node0 CPU(s): 0-19 NUMA node1 CPU(s): 20-39 NUMA node2 CPU(s): 40-59 NUMA node3 CPU(s): 60-79 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 atomics fphp asimdhp cpuid asimdrdm lrcpc dcpop asimddp ssbs From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a physical chip. available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 node 0 size: 64522 MB node 0 free: 63396 MB node 1 cpus: 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 node 1 size: 65420 MB node 1 free: 64530 MB node 2 cpus: 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 node 2 size: 65459 MB node 2 free: 64734 MB node 3 cpus: 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 node 3 size: 65426 MB node 3 free: 64871 MB node distances: node 0 1 2 3 0: 10 11 11 12 1: 11 10 12 11 2: 11 12 10 11 3: 12 11 11 10 From /proc/meminfo MemTotal: 267088384 kB HugePages_Total: 0 Hugepagesize: 524288 kB /sbin/tuned-adm active No current active profile. /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has performance From /etc/*release* /etc/*version* centos-release: CentOS Linux release 8.4.2105 centos-release-upstream: Derived from Red Hat Enterprise Linux 8.4 os-release: NAME="CentOS Linux" VERSION="8" ID="centos" ID_LIKE="rhel fedora" VERSION_ID="8" PLATFORM_ID="platform:el8" PRETTY_NAME="CentOS Linux 8" ANSI_COLOR="0;31" redhat-release: CentOS Linux release 8.4.2105 system-release: CentOS Linux release 8.4.2105 system-release-cpe: cpe:/o:centos:centos:8 uname -a: Linux localhost.localdomain 4.18.0-305.7.1.el8_4.aarch64 #1 SMP Tue Jun 29 21:32:00 UTC 2021 aarch64 aarch64 aarch64 GNU/Linux Kernel self-reported vulnerability status: CVE-2018-12207 (iTLB Multihit): Not affected CVE-2018-3620 (L1 Terminal Fault): Not affected Microarchitectural Data Sampling: Not affected CVE-2017-5754 (Meltdown): Not affected CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled via prctl CVE-2017-5753 (Spectre variant 1): Mitigation: __user pointer sanitization CVE-2017-5715 (Spectre variant 2): Not affected CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected CVE-2019-11135 (TSX Asynchronous Abort): Not affected run-level 3 Jul 5 17:29 SPEC is set to: /home/ampere_spec2017/spec2017 Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/cl-home xfs 819G 43G 776G 6% /home From /sys/devices/virtual/dmi/id Vendor: GIGABYTE Product: R272-P30-JG Product Family: Server Serial: 01234567890123456789AB Additional information from dmidecode follows. WARNING: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. Memory: 8x Samsung M393A4K40DB3-CWE 32 GB 2 rank 3200 BIOS: BIOS Vendor: GIGABYTE BIOS Version: F16e (SCP: 1.06.20210615) BIOS Date: 06/30/2021 BIOS Revision: 5.15 Firmware Revision: 1.6 (End of data from sysinfo program) Compiler Version Notes ---------------------- ============================================================================== C | 500.perlbench_r(base, peak) 502.gcc_r(base, peak) 505.mcf_r(base, | peak) 525.x264_r(base, peak) 557.xz_r(base, peak) ------------------------------------------------------------------------------ gcc (Ampere Computing Build 11923 20201215) 10.2.1 20201216 Copyright (C) 2020 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ------------------------------------------------------------------------------ ============================================================================== C++ | 520.omnetpp_r(base, peak) 523.xalancbmk_r(base, peak) | 531.deepsjeng_r(base, peak) 541.leela_r(base, peak) ------------------------------------------------------------------------------ g++ (Ampere Computing Build 11923 20201215) 10.2.1 20201216 Copyright (C) 2020 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ------------------------------------------------------------------------------ ============================================================================== Fortran | 548.exchange2_r(base, peak) ------------------------------------------------------------------------------ GNU Fortran (Ampere Computing Build 11923 20201215) 10.2.1 20201216 Copyright (C) 2020 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ------------------------------------------------------------------------------ Base Compiler Invocation ------------------------ C benchmarks: gcc C++ benchmarks: g++ Fortran benchmarks: gfortran Base Portability Flags ---------------------- 500.perlbench_r: -DSPEC_LINUX_AARCH64 -DSPEC_LP64 502.gcc_r: -DSPEC_LP64 505.mcf_r: -DSPEC_LP64 520.omnetpp_r: -DSPEC_LP64 523.xalancbmk_r: -DSPEC_LINUX -DSPEC_LP64 525.x264_r: -DSPEC_LP64 531.deepsjeng_r: -DSPEC_LP64 541.leela_r: -DSPEC_LP64 548.exchange2_r: -DSPEC_LP64 557.xz_r: -DSPEC_LP64 Base Optimization Flags ----------------------- C benchmarks: -mabi=lp64 -std=c99 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -g -O3 -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=96 --param max-inline-insns-auto=64 --param inline-unit-growth=96 -fgnu89-inline -ljemalloc C++ benchmarks: -mabi=lp64 -std=c++03 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -g -O3 -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=256 --param max-inline-insns-auto=128 --param inline-unit-growth=256 -ffinite-loops -ljemalloc Fortran benchmarks: -mabi=lp64 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -g -O3 -mcpu=neoverse-n1 -funroll-loops -flto=32 --param ipa-cp-eval-threshold=1 --param ipa-cp-unit-growth=80 --param ipa-cp-max-recursive-depth=8 -fno-inline-functions-called-once -fstack-arrays -flto-partition=one -ljemalloc Base Other Flags ---------------- C benchmarks: -fcommon -Wl,-Map,mapfile C++ benchmarks: -Wl,-Map,mapfile Fortran benchmarks: -Wl,-Map,mapfile Peak Compiler Invocation ------------------------ C benchmarks: gcc C++ benchmarks: g++ Fortran benchmarks: gfortran Peak Portability Flags ---------------------- Same as Base Portability Flags Peak Optimization Flags ----------------------- C benchmarks: 500.perlbench_r: -mabi=lp64 -std=c99 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -fprofile-generate -fprofile-use -g -Ofast -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=96 --param max-inline-insns-auto=64 --param inline-unit-growth=96 -fno-strict-aliasing -fno-unsafe-math-optimizations -fno-finite-math-only -ljemalloc 502.gcc_r: -mabi=lp64 -std=c99 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -fprofile-generate -fprofile-use -g -Ofast -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=96 --param max-inline-insns-auto=64 --param inline-unit-growth=96 -fno-strict-aliasing -fgnu89-inline -ljemalloc 505.mcf_r: -mabi=lp64 -std=c99 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -fprofile-generate -fprofile-use -g -Ofast -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=96 --param max-inline-insns-auto=64 --param inline-unit-growth=96 -fno-strict-aliasing -ljemalloc 525.x264_r: -mabi=lp64 -std=c99 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -g -Ofast -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=96 --param max-inline-insns-auto=64 --param inline-unit-growth=96 -ljemalloc 557.xz_r: -mabi=lp64 -std=c99 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -fprofile-generate -fprofile-use -g -Ofast -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=96 --param max-inline-insns-auto=64 --param inline-unit-growth=96 -ljemalloc C++ benchmarks: 520.omnetpp_r: -mabi=lp64 -std=c++03 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -fprofile-generate -fprofile-use -g -Ofast -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=256 --param max-inline-insns-auto=128 --param inline-unit-growth=256 -ffinite-loops -ljemalloc 523.xalancbmk_r: Same as 520.omnetpp_r 531.deepsjeng_r: -mabi=lp64 -std=c++03 -L/home/amptest/ampere_spec2017/gcc/install/lib64 -L/home/amptest/ampere_spec2017/gcc/install/lib -L/home/amptest/ampere_spec2017/jemalloc/install/lib -g -Ofast -mcpu=neoverse-n1 -funroll-loops -flto=32 --param early-inlining-insns=256 --param max-inline-insns-auto=128 --param inline-unit-growth=256 -ffinite-loops -ljemalloc 541.leela_r: Same as 520.omnetpp_r Fortran benchmarks: 548.exchange2_r: basepeak = yes Peak Other Flags ---------------- C benchmarks (except as noted below): -Wl,-Map,mapfile 525.x264_r: -fcommon -Wl,-Map,mapfile 557.xz_r: -w -Wl,-Map,mapfile C++ benchmarks: -Wl,-Map,mapfile Fortran benchmarks: -Wl,-Map,mapfile The flags files that were used to format this result can be browsed at http://www.spec.org/cpu2017/flags/gcc.2021-07-21.html http://www.spec.org/cpu2017/flags/GIGA-BYTE-platform-settings-Altra-rev.2.html You can also download the XML flags sources by saving the following links: http://www.spec.org/cpu2017/flags/gcc.2021-07-21.xml http://www.spec.org/cpu2017/flags/GIGA-BYTE-platform-settings-Altra-rev.2.xml SPEC CPU and SPECrate are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders. ---------------------------------------------------------------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact info@spec.org. Copyright 2017-2021 Standard Performance Evaluation Corporation Tested with SPEC CPU(R)2017 v1.1.5 on 2021-07-05 09:37:34-0400. Report generated on 2021-09-17 12:25:19 by CPU2017 text formatter v6255. Originally published on 2021-09-17.