# Invocation command line: # /mnt/ramdisk/cpu2017-1.1.7-ic2021.1/bin/harness/runcpu --nobuild --action validate --define default-platform-flags --define numcopies=128 --configfile ic2021.1-lin-core-avx512-rate-20201113_revB.cfg --define smt-on --define cores=64 --define physicalfirst --define invoke_with_interleave --define drop_caches --tune base,peak --output_format all --iterations 2 --output_format pdf,html,txt --nopower --runmode rate --tune base:peak --size refrate fprate # output_root was not used for this run ############################################################################ #------------------------------------------------------------------------------ # This is a sample SPEC CPU2017 config file. It is applicable for: # # Compiler name/version: Intel(R) C/C++ and Fortran 2021 Compilers for Linux # Operating system version: Red Hat Enterprise Linux 8.1, GLIBC 2.28 # ld version: GNU ld version 2.30 and above (older version may not work) # Hardware: Intel(R) processors supporting CORE-AVX512 tuning # # If you wish to build your own: # (1) Copy this to a new name # cd %SPEC%/config # copy this.cfg that.cfg # (2) Change items that are marked 'EDIT' (search for it) # # If you have different software or hardware, this config file may not work. # You may find a better config file for your system next to posted results: # http://www.spec.org/cpu2017/results # # Compiler issues: Contact your compiler vendor, not SPEC. # For SPEC help: http://www.spec.org/auto/cpu2017/Docs/techsupport.html #------------------------------------------------------------------------------ # Current setup is for intrate only # #--------- Preprocessor ------------------------------------------------------- # # Optionally edit if you wish: %define build_ncpus 8 # controls number of simultaneous compiles # Used to date the label %define version 20201113_revB # Used for the optimization tuning part of the label (not required) %if defined(%{noopt}) %define opt_label -noopt %elif defined(%{medopt}) %define opt_label -medopt %else %define opt_label %endif # Used for labeling static linked builds (not required) %if defined(%{static}) %define static_label -static %else %define static_label %endif #--------- Label -------------------------------------------------------------- # Arbitrary string, tags your binaries & directories. # Two Suggestions: # (1) Change this label as you try new ideas. label = ic2021.1-lin-core-avx512-rate%{opt_label}%{static_label}-%{version} #--------- Global Settings ---------------------------------------------------- # For info, see: # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname XXX # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#tune ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'label' to track binaries. # ######################################################## # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate command_add_redirect = 1 line_width = 1020 log_line_width = 1020 makeflags = -j%{build_ncpus} output_format = txt,cfg,pdf,csv preenv = 1 tune = base bench_post_setup = sync parallel_test = 1 mean_anyway = 1 reportable = 1 copies = 1 #Reference the flags Files flagsurl000=http://www.spec.org/cpu2017/flags/Intel-ic2021-official-linux64_revA.xml %ifdef %{default-platform-flags} flagsurl2=Default-Platform-Flags.xml %endif # Set some environment variables # Retain unused virtual memory for later reuse. This avoids out of memory errors for certain benchmarks. preENV_MALLOC_CONF = retain:true intrate: preENV_LD_LIBRARY_PATH = $[top]/lib/intel64:$[top]/lib/ia32:$[top]/je5.0.1-32 fprate: preENV_LD_LIBRARY_PATH = $[top]/lib/intel64:$[top]/je5.0.1-64 # Affinitization # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif OPT_JCC = -mbranches-within-32B-boundaries OPT_JCC_icx = -mbranches-within-32B-boundaries #--------- Compilers ---------------------------------------------------------- default: CC = icx -w -m64 -std=c11 CXX = icpx -w -m64 FC = ifort -w -m64 # How to say "Show me your version, please" CC_VERSION_OPTION = -V CXX_VERSION_OPTION = -V FC_VERSION_OPTION = -V JEMALLOC32_DIR = /usr/local/jemalloc32-5.0.1/lib JEMALLOC64_DIR = /usr/local/jemalloc64-5.0.1/lib INTEL64_DIR = /opt/intel/oneapi/compiler/2021.1.1/linux/compiler/lib/intel64_lin INTEL32_DIR = /opt/intel/oneapi/compiler/2021.1.1/linux/compiler/lib/ia32_lin %if !defined(%{static}) JEMALLOC32 = jemalloc JEMALLOC64 = jemalloc QKMALLOC = qkmalloc %else JEMALLOC32 = libjemalloc.a JEMALLOC64 = libjemalloc.a %endif #--------- Portability -------------------------------------------------------- intrate,fprate: PORTABILITY= -DSPEC_LP64 500.perlbench_r: CPORTABILITY = -DSPEC_LINUX_X64 521.wrf_r: CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY= -convert big_endian 523.xalancbmk_r: CXXPORTABILITY=-DSPEC_LINUX 526.blender_r: CPORTABILITY= -DSPEC_LINUX -funsigned-char 527.cam4_r: CPORTABILITY= -DSPEC_CASE_FLAG #--------- How Many CPUs? ----------------------------------------------------- # Both SPECrate and SPECspeed can test multiple chips / cores / hw threads # - For SPECrate, you set the number of copies. # See: https://www.spec.org/cpu2017/Docs/system-requirements.html#MultipleCPUs # # q. How many should I set? # a. Unknown, you will have to try it and see! # # To get you started, some suggestions: # # copies - This config file defaults to testing only 1 copy. You might # try changing it to match the number of cores on your system, # or perhaps the number of virtual CPUs as reported by: # grep -c processor /proc/cpuinfo # Be sure you have enough memory. See: # https://www.spec.org/cpu2017/Docs/system-requirements.html#memory # default: %if defined (%{numcopies}) copies = %{numcopies} %else copies = 1 # EDIT to change number of copies (see above) %endif #-------- Tuning Flags ------------------------------------------------- intspeed,fpspeed: #reconsider using a speed config file instead of a rate config file fail=1 default: SSE = -xCORE-AVX512 EXTRA_FOPTIMIZE = -nostandard-realloc-lhs -align array32byte -auto $(OPT_JCC) EXTRA_COPTIMIZE = $(OPT_JCC_icx) EXTRA_CXXOPTIMIZE = $(OPT_JCC_icx) intrate=default: EXTRA_LIBS = -L$(INTEL64_DIR) -l$(QKMALLOC) EXTRA_LDFLAGS = -Wl,-z,muldefs intrate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -O3 -ffast-math -flto -mfpmath=sse -funroll-loops OPT_ROOT_F = -O3 -ipo -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT_F) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSEF) $(OPT_ROOT_F) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT_F) %endif %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT_F) -static %endif %endif fprate=default: EXTRA_LIBS = -l$(JEMALLOC64) -L$(JEMALLOC64_DIR) EXTRA_LDFLAGS = -Wl,-z,muldefs fprate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -Ofast -ffast-math -flto -mfpmath=sse -funroll-loops OPT_ROOT_NOIPO = -Ofast -ffast-math -mfpmath=sse -funroll-loops OPT_ROOT_F = -O3 -ipo -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-multiple-gather-scatter-by-shuffles OPT_ROOT_F_NOIPO = -O3 -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-multiple-gather-scatter-by-shuffles %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT_F) FORT_FAST_NO_STATIC_NOIPO = $(SSE) $(OPT_ROOT_F_NOIPO) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT_F) %endif %else # BASE Options COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT_F) -static %endif %endif # Benchmarks with C/C++/Fortran: 507.cactuBSSN_r=base: COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC_NOIPO) -qopt-mem-layout-trans=4 # End of mixed languages intrate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif OPT_ROOT = -flto -O3 -ffast-math OPT_ROOT_ICC = -ipo -O3 -no-prec-div FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST_NO_STATIC_ICC = $(SSE) $(OPT_ROOT_ICC) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use 500.perlbench_r=peak=default: CC = icc LDFLAGS = %undef% FAST_NO_STATIC_ICC = $(SSE) $(OPT_ROOT_ICC) COPTIMIZE = $(FAST_NO_STATIC_ICC) -qopt-mem-layout-trans=4 EXTRA_OPTIMIZE = -fno-strict-overflow EXTRA_COPTIMIZE = $(OPT_JCC) EXTRA_CXXOPTIMIZE = $(OPT_JCC) 525.x264_r=peak: feedback = 0 EXTRA_OPTIMIZE = -fno-alias 502.gcc_r=peak: CC = icx -m32 -std=gnu89 -L/opt/intel/oneapi/compiler/2021.1.1/linux/compiler/lib/ia32_lin CXX = icpx -m32 -std=gnu89 -L/opt/intel/oneapi/compiler/2021.1.1/linux/compiler/lib/ia32_lin FAST_NO_STATIC = $(SSE) $(OPT_ROOT) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 EXTRA_LIBS = -L$(JEMALLOC32_DIR) -l$(JEMALLOC32) EXTRA_LDFLAGS = -Wl,-z,muldefs PORTABILITY = -D_FILE_OFFSET_BITS=64 EXTRA_COPTIMIZE = $(OPT_JCC_icx) EXTRA_CXXOPTIMIZE = $(OPT_JCC_icx) PASS1_CFLAGS = -fprofile-generate -xCORE-AVX512 -flto -Ofast PASS2_CFLAGS = -fprofile-use=default.profdata PASS1_FFLAGS = -fprofile-generate -xCORE-AVX512 -flto -Ofast PASS2_FFLAGS = -fprofile-use=default.profdata PASS1_CXXFLAGS = -fprofile-generate -xCORE-AVX512 -flto -Ofast PASS2_CXXFLAGS = -fprofile-use=default.profdata PASS1_LDFLAGS = -fprofile-generate -xCORE-AVX512 -flto -Ofast PASS2_LDFLAGS = -fprofile-use=default.profdata fdo_run1 = $command ; llvm-profdata merge -output=default.profdata *.profraw 557.xz_r=peak=default: feedback = 0 CC = icc LDFLAGS = %undef% FAST_NO_STATIC_ICC = $(SSE) $(OPT_ROOT_ICC) COPTIMIZE = $(FAST_NO_STATIC_ICC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 EXTRA_COPTIMIZE = $(OPT_JCC) EXTRA_CXXOPTIMIZE = $(OPT_JCC) 505.mcf_r,520.omnetpp_r,523.xalancbmk_r,531.deepsjeng_r,548.exchange2_r,541.leela_r=peak: basepeak=1 fprate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif OPT_ROOT = -flto -Ofast FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT_F) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT_F) -static FAST_NO_STATIC = $(SSE) $(OPT_ROOT) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 507.cactuBSSN_r,508.namd_r,519.lbm_r,526.blender_r,527.cam4_r=peak: basepeak=1 538.imagick_r,549.fotonik3d_r,997.specrand_fr=peak: basepeak=1 #fp rate subset for removing FDO 503.bwaves_r,510.parest_r,554.roms_r=peak=default: feedback = 0 %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -Ofast -ffast-math -flto -mfpmath=sse -funroll-loops OPT_ROOT_F = -O3 -ipo -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-multiple-gather-scatter-by-shuffles %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT_F) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif 511.povray_r,521.wrf_r=peak: CC = icc CXX = icpc FC = ifort OPT_ROOT = -O3 -ipo -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-multiple-gather-scatter-by-shuffles FAST_NO_STATIC = $(SSE) $(OPT_ROOT) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 EXTRA_LIBS = -L$(JEMALLOC64_DIR) -l$(JEMALLOC64) EXTRA_COPTIMIZE = $(OPT_JCC) EXTRA_CXXOPTIMIZE = $(OPT_JCC) LDFLAGS = %undef% EXTRA_LDFLAGS = %undef% PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use 544.nab_r=peak: EXTRA_OPTIMIZE = -fimf-accuracy-bits=14:sqrt %if defined (%{smt-on}) %define numpeakcopies %{cores} %endif 503.bwaves_r,510.parest_r,521.wrf_r,554.roms_r=peak: copies = %{numpeakcopies} #------------------------------------------------------------------------------- # Tester and System Descriptions - EDIT the sections below #------------------------------------------------------------------------------- # For info about any field, see # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#hw_memory #------------------------------------------------------------------------------- #--------- If you install new compilers, EDIT this section -------------------- intrate,intspeed,fpspeed,fprate: sw_compiler000 = C/C++: Version 2021.1 of Intel oneAPI DPC++/C++ sw_compiler001 = Compiler Build 20201113 for Linux; sw_compiler002 = Fortran: Version 2021.1 of Intel Fortran Compiler sw_compiler003 = Classic Build 20201112 for Linux; sw_compiler004 = C/C++: Version 2021.1 of Intel C/C++ Compiler sw_compiler005 = Classic Build 20201112 for Linux sw_base_ptrsize = 64-bit sw_other = jemalloc memory allocator V5.0.1 fprate,fpspeed: sw_peak_ptrsize = 64-bit intspeed: sw_peak_ptrsize = 64-bit intrate: sw_peak_ptrsize = 32/64-bit #--------- EDIT Your info --------------------------------------------------------- # To understand the difference between hw_vendor/sponsor/tester, see: # www.spec.org/auto/cpu2017/Docs/config.html#test_sponsor intrate,intspeed,fprate,fpspeed: # Important: keep this line hw_vendor = My Corporation tester = Intel Corporation test_sponsor = Intel Corporation license_num = 13 prepared_by = Dell Inc. #--------- EDIT system availability dates and system information ---------------------------------------------- intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field hw_avail = # Nov-2099 # Date of LAST hardware component to ship sw_avail = # Nov-2099 # Date of LAST software component to ship hw_cpu_nominal_mhz = # 9999 # Nominal chip frequency, in MHz hw_cpu_max_mhz = 3400 hw_ncores = # 9999 # number cores enabled hw_nthreadspercore = # 9 # number threads enabled per core hw_ncpuorder = # 1-9 chips # Ordering options hw_model = # TurboBlaster 3000 # system model name hw_other = # TurboNUMA Router 10 Gb # Other perf-relevant hw, or "None" # sw_other = # TurboHeap Library V8.1 # Other perf-relevant sw, or "None" hw_pcache = # 99 KB I + 99 KB D on chip per core # Primary cache size, type, location hw_scache = # 99 KB I+D on chip per 9 cores # Second cache or "None" hw_tcache = # 9 MB I+D on chip per chip # Third cache or "None" hw_ocache = # 9 GB I+D off chip per system board # Other cache or "None" # hw_memory001 = # 4 TB (256 x 16 GB 2Rx4 PC4-2133P-R, # N GB (M x N GB nRxn # hw_memory002 = # running at 1600 MHz) # PCn-nnnnnR-n[, ECC and other info]) #--------- Sysinfo fields - You may need to adjust this section --------------- # Note: Some commented-out fields above are automatically set to preliminary # values by sysinfo # www.spec.org/auto/cpu2017/Docs/config.html#sysinfo # Uncomment lines for which you already have a better answer than sysinfo # intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field # hw_cpu_name = # Intel Xeon E9-9999 v9 # chip name # hw_disk = # 9 x 9 TB SATA III 9999 RPM # Size, type, other perf-relevant info # hw_nchips = # 99 # number chips enabled # sw_file = # ext99 # File system # sw_state = # Run level 99 # Software state. # sw_os001 = # Linux Sailboat # Operating system # sw_os002 = # Distribution 7.2 SP1 # and version #--------- EDIT Intel Recommended Fields - You may wish to adjust this section ----- default: notes_000 = Binaries compiled on a system with 1x Intel Core i9-7980XE CPU + 64GB RAM notes_005 = memory using Red Hat Enterprise Linux 8.1 notes_jemalloc_000 = jemalloc, a general purpose malloc implementation notes_jemalloc_005 = built with the RedHat Enterprise 7.5, and the system compiler gcc 4.8.5 notes_jemalloc_010 = sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" #Ease of tagging results from the runcpu command line with commands run outside of runcpu harneess #Adjust as necessary for your SUT %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_020 = Transparent Huge Pages enabled by default %endif %ifdef %{drop_caches} notes_025 = Prior to runcpu invocation notes_030 = Filesystem page cache synced and cleared with: notes_035 = sync; echo 3> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_040 = runcpu command invoked through numactl i.e.: notes_045 = numactl --interleave=all runcpu %endif intrate,fprate: %if defined(%{no-numa}) notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %else notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %endif #include: Dell-info-Intel.inc # ----- Begin inclusion of 'Dell-info-Intel.inc' ############################################################################ #------------------------------------------------------- # Dell EMC (Dell Inc.) # # Intel #------------------------------------------------------- default: flagsurl001=http://www.spec.org/cpu2017/flags/Dell-Platform-Flags-PowerEdge-Intel-ICX-rev1.1.xml fprate,fpspeed,intrate,intspeed: # # Make sure Hardware availability and Software availability are correct for this platform - Mmm-yyyy # hw_avail = Apr-2021 # Date of LAST hardware component to ship sw_avail = Dec-2020 # # No need to edit these if you use a temporary file system (like ramdisk). hw_disk = 1 x 1.6 TB SATA SSD # Size, type, other perf-relevant info sw_file = xfs # File system hw_other = None hw_ocache = None # # BIOS Settings # - It is rare that these settings would need to be changed. # notes_plat_form_000 = notes_plat_form_005 = BIOS Settings: notes_plat_form_010 = Sub NUMA Cluster : 2-Way Clustering notes_plat_form_015 = Virtualization Technology : Disabled notes_plat_form_020 = notes_plat_form_025 = System Profile : Custom notes_plat_form_030 = CPU Power Management : Maximum Performance notes_plat_form_035 = C1E : Disabled notes_plat_form_040 = C States : Autonomous notes_plat_form_045 = Memory Patrol Scrub : Disabled notes_plat_form_050 = Energy Efficiency Policy : Performance notes_plat_form_055 = CPU Interconnect Bus Link notes_plat_form_060 = Power Management : Disabled fprate,intrate: fpspeed,fpspeed: notes_plat_form_100 = Logical Processor : Disabled fprate,fpspeed,intrate,intspeed: power_management000 = BIOS and OS set to prefer performance power_management001 = at the cost of additional power usage. #------------------------------------------------------------------------------- # **** DO NOT EDIT BELOW HERE!!! #------------------------------------------------------------------------------- #include: dell-system-info.inc # ----- Begin inclusion of 'dell-system-info.inc' ############################################################################ fprate,fpspeed,intrate,intspeed: hw_model000 = PowerEdge C6520 (Intel Xeon Platinum 8358, 2.60 hw_model001 = GHz) hw_cpu_name = Intel Xeon Platinum 8358 hw_nchips = 2 hw_ncpuorder = 1,2 chips hw_ncores = 64 hw_nthreadspercore = 2 hw_pcache = 32 KB I + 48 KB D on chip per core hw_scache = 1.25 MB I+D on chip per core hw_tcache = 48 MB I+D on chip per chip hw_memory = 1 TB (16 x 64 GB 2Rx4 PC4-3200AA-R) fw_bios = Version 1.1.2 released Apr-2021 sw_state = Run level 3 (multi-user) sw_file = tmpfs hw_disk = 125 GB on tmpfs sw_os000 = Red Hat Enterprise Linux 8.2 (Ootpa) sw_os001 = 4.18.0-193.el8.x86_64 hw_cpu_nominal_mhz = 2600 # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.7-ic2021.1/config/dell-system-info.inc' # Company Name, licnese, etc fprate,fpspeed,intrate,intspeed: hw_vendor = Dell Inc. tester = Dell Inc. test_sponsor = Dell Inc. license_num = 55 # Cleanup from sysinfo # Mitigation notes_010 = notes_015 = # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.7-ic2021.1/config/Dell-info-Intel.inc' # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:60a26e139a7df7ba5521c983304469c762a79f3394ac112dddae4bac7d1a4f55) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /mnt/ramdisk/cpu2017-1.1.7-ic2021.1/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6538 of 2020-09-24 e8664e66d2d7080afeaa89d4b38e2f1c notes_plat_sysinfo_015 = running on localhost.localdomain Sun May 2 20:18:12 2021 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = For more information on this section, see notes_plat_sysinfo_035 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 128 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_070 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_075 = cpu cores : 32 notes_plat_sysinfo_080 = siblings : 64 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 notes_plat_sysinfo_090 = 25 26 27 28 29 30 31 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 notes_plat_sysinfo_100 = 25 26 27 28 29 30 31 notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From lscpu: notes_plat_sysinfo_115 = Architecture: x86_64 notes_plat_sysinfo_120 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_125 = Byte Order: Little Endian notes_plat_sysinfo_130 = CPU(s): 128 notes_plat_sysinfo_135 = On-line CPU(s) list: 0-127 notes_plat_sysinfo_140 = Thread(s) per core: 2 notes_plat_sysinfo_145 = Core(s) per socket: 32 notes_plat_sysinfo_150 = Socket(s): 2 notes_plat_sysinfo_155 = NUMA node(s): 4 notes_plat_sysinfo_160 = Vendor ID: GenuineIntel notes_plat_sysinfo_165 = CPU family: 6 notes_plat_sysinfo_170 = Model: 106 notes_plat_sysinfo_175 = Model name: Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz notes_plat_sysinfo_180 = Stepping: 6 notes_plat_sysinfo_185 = CPU MHz: 3300.000 notes_plat_sysinfo_190 = BogoMIPS: 5200.00 notes_plat_sysinfo_195 = Virtualization: VT-x notes_plat_sysinfo_200 = L1d cache: 48K notes_plat_sysinfo_205 = L1i cache: 32K notes_plat_sysinfo_210 = L2 cache: 1280K notes_plat_sysinfo_215 = L3 cache: 49152K notes_plat_sysinfo_220 = NUMA node0 CPU(s): 0-15,64-79 notes_plat_sysinfo_225 = NUMA node1 CPU(s): 16-31,80-95 notes_plat_sysinfo_230 = NUMA node2 CPU(s): 32-47,96-111 notes_plat_sysinfo_235 = NUMA node3 CPU(s): 48-63,112-127 notes_plat_sysinfo_240 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov notes_plat_sysinfo_245 = pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp notes_plat_sysinfo_250 = lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid notes_plat_sysinfo_255 = aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 notes_plat_sysinfo_260 = xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave notes_plat_sysinfo_265 = avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 invpcid_single ssbd notes_plat_sysinfo_270 = mba ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase notes_plat_sysinfo_275 = tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm rdt_a avx512f avx512dq notes_plat_sysinfo_280 = rdseed adx smap avx512ifma clflushopt clwb intel_pt avx512cd sha_ni avx512bw notes_plat_sysinfo_285 = avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total notes_plat_sysinfo_290 = cqm_mbm_local wbnoinvd dtherm ida arat pln pts avx512vbmi umip pku ospke notes_plat_sysinfo_295 = avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg tme avx512_vpopcntdq notes_plat_sysinfo_300 = la57 rdpid md_clear pconfig flush_l1d arch_capabilities notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = /proc/cpuinfo cache data notes_plat_sysinfo_315 = cache size : 49152 KB notes_plat_sysinfo_320 = notes_plat_sysinfo_325 = From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a notes_plat_sysinfo_330 = physical chip. notes_plat_sysinfo_335 = available: 4 nodes (0-3) notes_plat_sysinfo_340 = node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 64 65 66 67 68 69 70 71 72 73 74 75 notes_plat_sysinfo_345 = 76 77 78 79 notes_plat_sysinfo_350 = node 0 size: 257435 MB notes_plat_sysinfo_355 = node 0 free: 240892 MB notes_plat_sysinfo_360 = node 1 cpus: 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 80 81 82 83 84 85 86 87 88 notes_plat_sysinfo_365 = 89 90 91 92 93 94 95 notes_plat_sysinfo_370 = node 1 size: 258040 MB notes_plat_sysinfo_375 = node 1 free: 236398 MB notes_plat_sysinfo_380 = node 2 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 96 97 98 99 100 101 102 notes_plat_sysinfo_385 = 103 104 105 106 107 108 109 110 111 notes_plat_sysinfo_390 = node 2 size: 258013 MB notes_plat_sysinfo_395 = node 2 free: 245895 MB notes_plat_sysinfo_400 = node 3 cpus: 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 112 113 114 115 116 117 notes_plat_sysinfo_405 = 118 119 120 121 122 123 124 125 126 127 notes_plat_sysinfo_410 = node 3 size: 258038 MB notes_plat_sysinfo_415 = node 3 free: 245916 MB notes_plat_sysinfo_420 = node distances: notes_plat_sysinfo_425 = node 0 1 2 3 notes_plat_sysinfo_430 = 0: 10 11 20 20 notes_plat_sysinfo_435 = 1: 11 10 20 20 notes_plat_sysinfo_440 = 2: 20 20 10 11 notes_plat_sysinfo_445 = 3: 20 20 11 10 notes_plat_sysinfo_450 = notes_plat_sysinfo_455 = From /proc/meminfo notes_plat_sysinfo_460 = MemTotal: 1056284476 kB notes_plat_sysinfo_465 = HugePages_Total: 0 notes_plat_sysinfo_470 = Hugepagesize: 2048 kB notes_plat_sysinfo_475 = notes_plat_sysinfo_480 = /sbin/tuned-adm active notes_plat_sysinfo_485 = Current active profile: throughput-performance notes_plat_sysinfo_490 = notes_plat_sysinfo_495 = From /etc/*release* /etc/*version* notes_plat_sysinfo_500 = os-release: notes_plat_sysinfo_505 = NAME="Red Hat Enterprise Linux" notes_plat_sysinfo_510 = VERSION="8.2 (Ootpa)" notes_plat_sysinfo_515 = ID="rhel" notes_plat_sysinfo_520 = ID_LIKE="fedora" notes_plat_sysinfo_525 = VERSION_ID="8.2" notes_plat_sysinfo_530 = PLATFORM_ID="platform:el8" notes_plat_sysinfo_535 = PRETTY_NAME="Red Hat Enterprise Linux 8.2 (Ootpa)" notes_plat_sysinfo_540 = ANSI_COLOR="0;31" notes_plat_sysinfo_545 = redhat-release: Red Hat Enterprise Linux release 8.2 (Ootpa) notes_plat_sysinfo_550 = system-release: Red Hat Enterprise Linux release 8.2 (Ootpa) notes_plat_sysinfo_555 = system-release-cpe: cpe:/o:redhat:enterprise_linux:8.2:ga notes_plat_sysinfo_560 = notes_plat_sysinfo_565 = uname -a: notes_plat_sysinfo_570 = Linux localhost.localdomain 4.18.0-193.el8.x86_64 #1 SMP Fri Mar 27 14:35:58 UTC 2020 notes_plat_sysinfo_575 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_580 = notes_plat_sysinfo_585 = Kernel self-reported vulnerability status: notes_plat_sysinfo_590 = notes_plat_sysinfo_595 = CVE-2018-12207 (iTLB Multihit): Not affected notes_plat_sysinfo_600 = CVE-2018-3620 (L1 Terminal Fault): Not affected notes_plat_sysinfo_605 = Microarchitectural Data Sampling: Not affected notes_plat_sysinfo_610 = CVE-2017-5754 (Meltdown): Not affected notes_plat_sysinfo_615 = CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store notes_plat_sysinfo_620 = Bypass disabled via prctl and notes_plat_sysinfo_625 = seccomp notes_plat_sysinfo_630 = CVE-2017-5753 (Spectre variant 1): Mitigation: usercopy/swapgs notes_plat_sysinfo_635 = barriers and __user pointer notes_plat_sysinfo_640 = sanitization notes_plat_sysinfo_645 = CVE-2017-5715 (Spectre variant 2): Mitigation: Enhanced IBRS, IBPB: notes_plat_sysinfo_650 = conditional, RSB filling notes_plat_sysinfo_655 = CVE-2020-0543 (Special Register Buffer Data Sampling): No status reported notes_plat_sysinfo_660 = CVE-2019-11135 (TSX Asynchronous Abort): Not affected notes_plat_sysinfo_665 = notes_plat_sysinfo_670 = run-level 3 May 2 15:19 notes_plat_sysinfo_675 = notes_plat_sysinfo_680 = SPEC is set to: /mnt/ramdisk/cpu2017-1.1.7-ic2021.1 notes_plat_sysinfo_685 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_690 = tmpfs tmpfs 125G 55G 71G 44% /mnt/ramdisk notes_plat_sysinfo_695 = notes_plat_sysinfo_700 = From /sys/devices/virtual/dmi/id notes_plat_sysinfo_705 = Vendor: Dell Inc. notes_plat_sysinfo_710 = Product: PowerEdge C6520 notes_plat_sysinfo_715 = Product Family: PowerEdge notes_plat_sysinfo_720 = Serial: SDPT078 notes_plat_sysinfo_725 = notes_plat_sysinfo_730 = Additional information from dmidecode follows. WARNING: Use caution when you interpret notes_plat_sysinfo_735 = this section. The 'dmidecode' program reads system data which is "intended to allow notes_plat_sysinfo_740 = hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_745 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_750 = Memory: notes_plat_sysinfo_755 = 16x 00AD063200AD HMAA8GR7AJR4N-XN 64 GB 2 rank 3200 notes_plat_sysinfo_760 = notes_plat_sysinfo_765 = BIOS: notes_plat_sysinfo_770 = BIOS Vendor: Dell Inc. notes_plat_sysinfo_775 = BIOS Version: 1.1.2 notes_plat_sysinfo_780 = BIOS Date: 04/09/2021 notes_plat_sysinfo_785 = BIOS Revision: 1.1 notes_plat_sysinfo_790 = notes_plat_sysinfo_795 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon Platinum 8358 hw_disk = 125 GB add more disk info here hw_memory001 = 1007.351 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 2 prepared_by = root (is never output, only tags rawfile) sw_file = tmpfs sw_os001 = Red Hat Enterprise Linux release 8.2 (Ootpa) sw_os002 = 4.18.0-193.el8.x86_64 sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_mitig_000 = notes_mitig_005 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_mitig_010 =is mitigated in the system as tested and documented. notes_mitig_015 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_mitig_020 =is mitigated in the system as tested and documented. notes_mitig_025 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_mitig_030 =is mitigated in the system as tested and documented. notes_tmpfs_000 = notes_tmpfs_005 =Benchmark run from a 125 GB ramdisk created with the cmd: "mount -t tmpfs -o size=125G tmpfs /mnt/ramdisk"