|
Fujitsu PRIMERGY RX2540 M6, Intel Xeon Platinum 8380, |
SPECrate®2017_fp_base = 462 |
|
SPECrate®2017_fp_peak = Not Run SPECrate®2017_fp_energy_peak = Not Run |
| CPU2017 License: | 19 | Test Date: | Mar-2021 |
|---|---|---|---|
| Test Sponsor: | Fujitsu | Hardware Availability: | May-2021 |
| Tested by: | Fujitsu | Software Availability: | Feb-2021 |
Benchmark result graphs are available in the PDF report.
| Hardware | |
|---|---|
| CPU Name: | Intel Xeon Platinum 8380 |
| Max MHz: | 3400 |
| Nominal: | 2300 |
| Enabled: | 80 cores, 2 chips |
| Orderable: | 1,2 chips |
| Cache L1: | 32 KB I + 48 KB D on chip per core |
| L2: | 1.25 MB I+D on chip per core |
| L3: | 60 MB I+D on chip per chip |
| Other: | None |
| Memory: | 1 TB (32 x 32 GB 2Rx4 PC4-3200AA-R) |
| Storage: | 1 x SATA M.2 SSD, 480GB |
| Other: | None |
| Software | |
|---|---|
| OS: | SUSE Linux Enterprise Server 15 SP2 5.3.18-22-default |
| Compiler: | C/C++: Version 2021.1 of Intel oneAPI DPC++/C++ Compiler Build 20201113 for Linux; C/C++: Version 2021.1 of Intel C/C++ Compiler Classic Build 20201112 for Linux; Fortran: Version 2021.1 of Intel Fortran Compiler Classic Build 20201112 for Linux |
| Parallel: | No |
| Firmware: | Fujitsu BIOS Version V1.0.0.0 R1.4.0 for D3891-A1x. Released May-2021 tested as V1.0.0.0 R1.2.0 for D3891-A1x Apr-2021 |
| File System: | xfs |
| System State: | Run level 3 (multi-user) |
| Base Pointers: | 64-bit |
| Peak Pointers: | Not Applicable |
| Other: | jemalloc memory allocator V5.0.1 |
| Power Management: | BIOS set to prefer performance at the cost of additional power usage |
| Power | |
|---|---|
| Max. Power (W): | 875.4 |
| Idle Power (W): | 269.07 |
| Min. Temperature (C): | 24.69 |
| Elevation (m): | 11 |
| Line Standard: | 200 V / 50 Hz / 1 phase / 2 wires |
| Provisioning: | Line-powered |
| Power Settings | |
|---|---|
| Management FW: | Version 3.20i for D3891-A1x of Fujitsu BMC Firmware |
| Memory Mode: | Normal |
| Power-Relevant Hardware | |
|---|---|
| Power Supply: | 1 x 1600 W (non-redundant) |
| Details: | Standard power supply part of base unit S26113-E630-V50-1 |
| Backplane: | 24 x 2.5inch HDD back plan |
| Other Storage: | Embedded SATA Controller |
| Storage Model #s: | S26361-F5706 |
| NICs Installed: | 1 x Intel I350-T4 @ 1 Gb |
| NICs Enabled (FW/OS): | 4 / 4 |
| NICs Connected/Speed: | 1 @ 1 Gb |
| Other HW Model #s: | None |
| Power Analyzer | |
|---|---|
| Power Analyzer: | 10.26.120.153:8888 |
| Hardware Vendor: | Hioki |
| Model: | Hioki PW3336:1-Channel |
| Serial Number: | 170213562 |
| Input Connection: | USB via USB-Serial CH340 |
| Metrology Institute: | NICT |
| Calibration By: | HIOKI E.E. CORPORATION |
| Calibration Label: | H06400088 |
| Calibration Date: | 25-Jun-2020 |
| PTDaemon® Version: | 1.9.1 (a2d19f26; 2019-07-17) |
| Setup Description: | Connected to PSU 1 |
| Current Ranges Used: | 5A |
| Voltage Range Used: | 300V |
| Temperature Meter | |
|---|---|
| Temperature Meter: | 10.26.120.153:8889 |
| Hardware Vendor: | Digi International Inc. |
| Model: | DigiWATCHPORT_H |
| Serial Number: | W 613 66209 |
| Input Connection: | USB |
| PTDaemon Version: | 1.9.1 (a2d19f26; 2019-07-17) |
| Setup Description: | 5 mm in front of SUT main air intake |
Base Results Table
| Benchmark | Copies | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPECrate®2017_fp_base | 462 | ||||||||||||||||||
| SPECrate®2017_fp_energy_base | 633 | ||||||||||||||||||
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
| 503.bwaves_r | 80 | 1107 | 725 | 893 | 979 | 807 | 821 | 1106 | 725 | 895 | 977 | 809 | 822 | 1107 | 725 | 895 | 977 | 809 | 822 |
| 507.cactuBSSN_r | 80 | 152 | 666 | 126 | 880 | 831 | 849 | 152 | 666 | 127 | 878 | 834 | 846 | 152 | 666 | 127 | 878 | 834 | 849 |
| 508.namd_r | 80 | 183 | 415 | 141 | 588 | 769 | 830 | 180 | 421 | 140 | 594 | 774 | 832 | 181 | 421 | 140 | 592 | 774 | 831 |
| 510.parest_r | 80 | 707 | 296 | 576 | 395 | 815 | 829 | 709 | 295 | 578 | 394 | 815 | 828 | 705 | 297 | 574 | 397 | 814 | 828 |
| 511.povray_r | 80 | 300 | 622 | 227 | 891 | 757 | 815 | 299 | 625 | 227 | 892 | 760 | 821 | 309 | 604 | 231 | 878 | 746 | 822 |
| 519.lbm_r | 80 | 309 | 273 | 257 | 373 | 830 | 865 | 310 | 272 | 257 | 373 | 829 | 865 | 309 | 273 | 257 | 373 | 830 | 858 |
| 521.wrf_r | 80 | 469 | 382 | 389 | 503 | 830 | 861 | 467 | 384 | 388 | 504 | 831 | 863 | 467 | 384 | 389 | 503 | 833 | 860 |
| 526.blender_r | 80 | 258 | 472 | 200 | 660 | 775 | 833 | 258 | 472 | 200 | 660 | 775 | 836 | 258 | 472 | 200 | 659 | 775 | 845 |
| 527.cam4_r | 80 | 278 | 504 | 223 | 683 | 804 | 869 | 277 | 505 | 223 | 683 | 804 | 859 | 278 | 503 | 223 | 683 | 803 | 875 |
| 538.imagick_r | 80 | 192 | 1040 | 131 | 1650 | 682 | 859 | 156 | 1280 | 117 | 1830 | 755 | 859 | 155 | 1280 | 117 | 1840 | 754 | 859 |
| 544.nab_r | 80 | 167 | 804 | 129 | 1130 | 769 | 807 | 169 | 798 | 130 | 1130 | 768 | 820 | 168 | 803 | 129 | 1130 | 770 | 815 |
| 549.fotonik3d_r | 80 | 1357 | 230 | 1090 | 319 | 802 | 816 | 1358 | 230 | 1090 | 319 | 802 | 816 | 1358 | 230 | 1090 | 319 | 801 | 816 |
| 554.roms_r | 80 | 645 | 197 | 536 | 261 | 831 | 843 | 644 | 197 | 536 | 262 | 831 | 845 | 648 | 196 | 537 | 261 | 830 | 844 |
Submit Notes
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Operating System Notes
Stack size set to unlimited using "ulimit -s unlimited"
Environment Variables Notes
Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH =
"/home/Benchmark/speccpu-1.1.5_fprate/lib/intel64:/home/Benchmark/speccp
u-1.1.5_fprate/je5.0.1-64"
MALLOC_CONF = "retain:true"
General Notes
Binaries compiled on a system with 1x Intel Core i9-7940X CPU + 64GB RAM memory using openSUSE Leap 15.2 Transparent Huge Pages enabled by default Prior to runcpu invocation Filesystem page cache synced and cleared with: sync; echo 3> /proc/sys/vm/drop_caches runcpu command invoked through numactl i.e.: numactl --interleave=all runcpu <etc> NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. jemalloc, a general purpose malloc implementation built with the RedHat Enterprise 7.5, and the system compiler gcc 4.8.5 sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases
Platform Notes
BIOS configuration:
Hyper Threading = Disabled
Adjacent Cache Line Prefetch = Disabled
DCU Streamer Prefetcher = Disabled
Intel Virtualization Technology = Disabled
Override OS Energy Performance = Enabled
Energy Performance = Performance
CPU C1E Support = Disabled
Patrol Scrub = Enabled
SNC = Enable SNC2
Sysinfo program /home/Benchmark/speccpu-1.1.5_fprate/bin/sysinfo
Rev: r6538 of 2020-09-24 e8664e66d2d7080afeaa89d4b38e2f1c
running on localhost Thu Apr 8 20:09:49 2021
SUT (System Under Test) info as seen by some common utilities.
For more information on this section, see
https://www.spec.org/cpu2017/Docs/config.html#sysinfo
From /proc/cpuinfo
model name : Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz
2 "physical id"s (chips)
80 "processors"
cores, siblings (Caution: counting these is hw and system dependent. The following
excerpts from /proc/cpuinfo might not be reliable. Use with caution.)
cpu cores : 40
siblings : 40
physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
From lscpu:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 46 bits physical, 57 bits virtual
CPU(s): 80
On-line CPU(s) list: 0-79
Thread(s) per core: 1
Core(s) per socket: 40
Socket(s): 2
NUMA node(s): 4
Vendor ID: GenuineIntel
CPU family: 6
Model: 106
Model name: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz
Stepping: 6
CPU MHz: 799.933
CPU max MHz: 3400.0000
CPU min MHz: 800.0000
BogoMIPS: 4600.00
Virtualization: VT-x
L1d cache: 48K
L1i cache: 32K
L2 cache: 1280K
L3 cache: 61440K
NUMA node0 CPU(s): 0-19
NUMA node1 CPU(s): 20-39
NUMA node2 CPU(s): 40-59
NUMA node3 CPU(s): 60-79
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp
lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid
aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16
xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave
avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 invpcid_single ssbd
mba ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad
fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm rdt_a avx512f
avx512dq rdseed adx smap avx512ifma clflushopt clwb intel_pt avx512cd sha_ni
avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total
cqm_mbm_local wbnoinvd dtherm ida arat pln pts hwp hwp_act_window hwp_epp
hwp_pkg_req avx512vbmi umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni
avx512_bitalg tme avx512_vpopcntdq la57 rdpid md_clear pconfig flush_l1d
arch_capabilities
/proc/cpuinfo cache data
cache size : 61440 KB
From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a
physical chip.
available: 4 nodes (0-3)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
node 0 size: 257648 MB
node 0 free: 257309 MB
node 1 cpus: 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
node 1 size: 258043 MB
node 1 free: 257680 MB
node 2 cpus: 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
node 2 size: 258009 MB
node 2 free: 257603 MB
node 3 cpus: 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
node 3 size: 257814 MB
node 3 free: 257511 MB
node distances:
node 0 1 2 3
0: 10 11 20 20
1: 11 10 20 20
2: 20 20 10 11
3: 20 20 11 10
From /proc/meminfo
MemTotal: 1056271952 kB
HugePages_Total: 0
Hugepagesize: 2048 kB
/sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has
powersave
From /etc/*release* /etc/*version*
os-release:
NAME="SLES"
VERSION="15-SP2"
VERSION_ID="15.2"
PRETTY_NAME="SUSE Linux Enterprise Server 15 SP2"
ID="sles"
ID_LIKE="suse"
ANSI_COLOR="0;32"
CPE_NAME="cpe:/o:suse:sles:15:sp2"
uname -a:
Linux localhost 5.3.18-22-default #1 SMP Wed Jun 3 12:16:43 UTC 2020 (720aeba) x86_64
x86_64 x86_64 GNU/Linux
Kernel self-reported vulnerability status:
CVE-2018-12207 (iTLB Multihit): Not affected
CVE-2018-3620 (L1 Terminal Fault): Not affected
Microarchitectural Data Sampling: Not affected
CVE-2017-5754 (Meltdown): Not affected
CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store
Bypass disabled via prctl and
seccomp
CVE-2017-5753 (Spectre variant 1): Mitigation: usercopy/swapgs
barriers and __user pointer
sanitization
CVE-2017-5715 (Spectre variant 2): Mitigation: Enhanced IBRS, IBPB:
conditional, RSB filling
CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected
CVE-2019-11135 (TSX Asynchronous Abort): Not affected
run-level 3 Apr 8 13:36
SPEC is set to: /home/Benchmark/speccpu-1.1.5_fprate
Filesystem Type Size Used Avail Use% Mounted on
/dev/sdb3 xfs 376G 149G 228G 40% /home
From /sys/devices/virtual/dmi/id
Vendor: FUJITSU
Product: PRIMERGY RX2540 M6
Product Family: SERVER
Serial: EWAAxxxxxx
Additional information from dmidecode follows. WARNING: Use caution when you interpret
this section. The 'dmidecode' program reads system data which is "intended to allow
hardware to be accurately determined", but the intent may not be met, as there are
frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
Memory:
32x Samsung M393A4K40DB3-CWE 32 GB 2 rank 3200
BIOS:
BIOS Vendor: FUJITSU
BIOS Version: V1.0.0.0 R1.2.0 for D3891-A1x
BIOS Date: 04/01/2021
BIOS Revision: 1.2
Firmware Revision: 3.20
(End of data from sysinfo program)
Power Settings Notes
PTDaemon to measure power and temperature was run on a PRIMERGY RX2530 M5 as a controller with 2x Intel Xeon Platinum 8280 CPU and 768 GB of memory using Windows Server 2012 R2. Power management in the BIOS was default except for any settings mentioned in BIOS Configuration. No power management settings were set in the management firmware. The optional optical drive was not installed. The run was started and observed through the management firmware.
Compiler Version Notes
============================================================================== C | 519.lbm_r(base) 538.imagick_r(base) 544.nab_r(base) ------------------------------------------------------------------------------ Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2021.1 Build 20201113 Copyright (C) 1985-2020 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------ ============================================================================== C++ | 508.namd_r(base) 510.parest_r(base) ------------------------------------------------------------------------------ Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2021.1 Build 20201113 Copyright (C) 1985-2020 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------ ============================================================================== C++, C | 511.povray_r(base) 526.blender_r(base) ------------------------------------------------------------------------------ Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2021.1 Build 20201113 Copyright (C) 1985-2020 Intel Corporation. All rights reserved. Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2021.1 Build 20201113 Copyright (C) 1985-2020 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------ ============================================================================== C++, C, Fortran | 507.cactuBSSN_r(base) ------------------------------------------------------------------------------ Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2021.1 Build 20201113 Copyright (C) 1985-2020 Intel Corporation. All rights reserved. Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2021.1 Build 20201113 Copyright (C) 1985-2020 Intel Corporation. All rights reserved. Intel(R) Fortran Intel(R) 64 Compiler Classic for applications running on Intel(R) 64, Version 2021.1 Build 20201112_000000 Copyright (C) 1985-2020 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------ ============================================================================== Fortran | 503.bwaves_r(base) 549.fotonik3d_r(base) 554.roms_r(base) ------------------------------------------------------------------------------ Intel(R) Fortran Intel(R) 64 Compiler Classic for applications running on Intel(R) 64, Version 2021.1 Build 20201112_000000 Copyright (C) 1985-2020 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------ ============================================================================== Fortran, C | 521.wrf_r(base) 527.cam4_r(base) ------------------------------------------------------------------------------ Intel(R) Fortran Intel(R) 64 Compiler Classic for applications running on Intel(R) 64, Version 2021.1 Build 20201112_000000 Copyright (C) 1985-2020 Intel Corporation. All rights reserved. Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2021.1 Build 20201113 Copyright (C) 1985-2020 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------
Base Compiler Invocation
C benchmarks:
| icx |
C++ benchmarks:
| icpx |
Fortran benchmarks:
| ifort |
Benchmarks using both Fortran and C:
| ifort icx |
Benchmarks using both C and C++:
| icpx icx |
Benchmarks using Fortran, C, and C++:
| icpx icx ifort |
Base Portability Flags
| 503.bwaves_r: | -DSPEC_LP64 |
| 507.cactuBSSN_r: | -DSPEC_LP64 |
| 508.namd_r: | -DSPEC_LP64 |
| 510.parest_r: | -DSPEC_LP64 |
| 511.povray_r: | -DSPEC_LP64 |
| 519.lbm_r: | -DSPEC_LP64 |
| 521.wrf_r: | -DSPEC_LP64 -DSPEC_CASE_FLAG -convert big_endian |
| 526.blender_r: | -DSPEC_LP64 -DSPEC_LINUX -funsigned-char |
| 527.cam4_r: | -DSPEC_LP64 -DSPEC_CASE_FLAG |
| 538.imagick_r: | -DSPEC_LP64 |
| 544.nab_r: | -DSPEC_LP64 |
| 549.fotonik3d_r: | -DSPEC_LP64 |
| 554.roms_r: | -DSPEC_LP64 |
Base Optimization Flags
C benchmarks:
C++ benchmarks:
| -w -m64 -Wl,-z,muldefs -xCORE-AVX512 -Ofast -ffast-math -flto -mfpmath=sse -funroll-loops -qopt-mem-layout-trans=4 -mbranches-within-32B-boundaries -ljemalloc -L/usr/local/jemalloc64-5.0.1/lib |