SPEC CPU®2017 Integer Speed Result

Copyright 2017-2021 Standard Performance Evaluation Corporation

Fujitsu

PRIMERGY RX2540 M6, Intel Xeon Gold 6346,
3.10GHz

SPECspeed®2017_int_base = 12.00

SPECspeed®2017_int_energy_base = 36.40

SPECspeed®2017_int_peak = Not Run

SPECspeed®2017_int_energy_peak = Not Run

CPU2017 License: 19 Test Date: Apr-2021
Test Sponsor: Fujitsu Hardware Availability: May-2021
Tested by: Fujitsu Software Availability: Aug-2020

Benchmark result graphs are available in the PDF report.

Hardware
CPU Name: Intel Xeon Gold 6346
  Max MHz: 3600
  Nominal: 3100
Enabled: 32 cores, 2 chips, 2 threads/core
Orderable: 1,2 chips
Cache L1: 32 KB I + 48 KB D on chip per core
  L2: 1.25 MB I+D on chip per core
  L3: 36 MB I+D on chip per chip
  Other: None
Memory: 1 TB (32 x 32 GB 2Rx4 PC4-3200AA-R)
Storage: 1 x SATA M.2 SSD, 480GB
Other: None
Software
OS: Red Hat Enterprise Linux release 8.2 (Ootpa)
4.18.0-193.el8.x86_64
Compiler: C/C++: Version 19.1.2.275 of Intel
C/C++ Compiler for Linux;
Fortran: Version 19.1.2.275 of
Intel Fortran Compiler for Linux
Parallel: Yes
Firmware: Fujitsu BIOS Version V1.0.0.0 R1.4.0 for
D3891-A1x. Released May-2021
tested as V1.0.0.0 R1.2.0 for D3891-A1x Apr-2021
File System: xfs
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: Not Applicable
Other: jemalloc memory allocator V5.0.1
Power Management: BIOS set to balance power and performance
Power
Max. Power (W): 636.4
Idle Power (W): 338.56
Min. Temperature (C): 27.44
Elevation (m): 11
Line Standard: 200 V / 50 Hz / 1 phase / 2 wires
Provisioning: Line-powered
Power Settings
Management FW: Version 3.20i for D3891-A1x of Fujitsu BMC
Firmware
Memory Mode: Normal
Power-Relevant Hardware
Power Supply: 1 x 900 W (non-redundant)
  Details: Standard power supply part of base unit
S26113-E629-V50-1
Backplane: 24 x 2.5inch HDD back plan
Other Storage: Embedded SATA Controller
Storage Model #s: S26361-F5706
NICs Installed: 1 x Intel I350-T4 @ 1 Gb
NICs Enabled (FW/OS): 4 / 4
NICs Connected/Speed: 1 @ 1 Gb
Other HW Model #s: None
Power Analyzer
Power Analyzer: 10.26.120.153:8888
Hardware Vendor: Hioki
Model: Hioki PW3336:1-Channel
Serial Number: 170213562
Input Connection: USB via USB-Serial CH340
Metrology Institute: NICT
Calibration By: HIOKI E.E. CORPORATION
Calibration Label: H06400088
Calibration Date: 25-Jun-2020
PTDaemon® Version: 1.9.1 (a2d19f26; 2019-07-17)
Setup Description: Connected to PSU 1
Current Ranges Used: 5A
Voltage Range Used: 300V
Temperature Meter
Temperature Meter: 10.26.120.153:8889
Hardware Vendor: Digi International Inc.
Model: DigiWATCHPORT_H
Serial Number: W 613 66209
Input Connection: USB
PTDaemon Version: 1.9.1 (a2d19f26; 2019-07-17)
Setup Description: 5 mm in front of SUT main air intake

Base Results Table

Benchmark Threads Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
SPECspeed®2017_int_base 12.00
SPECspeed®2017_int_energy_base 36.40
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
600.perlbench_s 64 239 7.41 84.5 22.8 353 362 238 7.44 84.4 22.8 354 364 238 7.45 84.4 22.8 354 363
602.gcc_s 64 361 11.00 1280 33.9 354 367 363 11.00 1290 33.7 355 367 361 11.00 1280 33.8 354 365
605.mcf_s 64 244 19.40 86.5 59.5 355 365 245 19.30 87.1 59.2 356 364 243 19.40 86.4 59.6 355 365
620.omnetpp_s 64 151 10.80 53.7 33.1 355 363 145 11.20 51.5 34.5 354 364 145 11.20 51.5 34.4 355 363
623.xalancbmk_s 64 102 13.90 35.8 43.0 352 361 101 14.00 35.6 43.2 352 360 101 14.00 35.7 43.1 352 362
625.x264_s 64 102 17.20 36.1 53.1 353 359 102 17.30 36.1 53.2 353 362 102 17.30 36.0 53.3 353 361
631.deepsjeng_s 64 238 6.02 84.0 18.5 353 363 238 6.01 84.0 18.5 353 365 238 6.03 83.8 18.6 353 363
641.leela_s 64 344 4.96 1210 15.3 351 361 344 4.95 1210 15.3 351 361 344 4.95 1210 15.3 351 361
648.exchange2_s 64 142 20.70 50.1 63.8 353 360 142 20.70 50.0 64.0 352 361 142 20.70 49.9 64.0 352 362
657.xz_s 64 260 23.80 1070 62.7 414 636 260 23.80 1070 62.7 413 635 259 23.90 1070 63.0 413 636

Operating System Notes

 Stack size set to unlimited using "ulimit -s unlimited"
 echo 1000 > /proc/sys/kernel/sched_migration_cost_ns

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
KMP_AFFINITY = "granularity=fine,scatter"
LD_LIBRARY_PATH =
     "/home/PVT/speccpu-1.1.5/lib/intel64:/home/PVT/speccpu-1.1.5/je5.0.1-64"
MALLOC_CONF = "retain:true"
OMP_STACKSIZE = "192M"

General Notes

 Binaries compiled on a system with 1x Intel Core i9-7980XE CPU + 64GB RAM
 memory using Redhat Enterprise Linux 8.0
 Transparent Huge Pages enabled by default
 Prior to runcpu invocation
 Filesystem page cache synced and cleared with:
 sync; echo 3>       /proc/sys/vm/drop_caches
 NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown)
 is mitigated in the system as tested and documented.
 Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1)
 is mitigated in the system as tested and documented.
 Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
 is mitigated in the system as tested and documented.
 jemalloc, a general purpose malloc implementation
 built with the RedHat Enterprise 7.5, and the system compiler gcc 4.8.5
 sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases

Platform Notes

 BIOS configuration:
 CPU C1E Support = Disabled
 UPI Link Frequency Select = 10.4 GT/s

 Sysinfo program /home/PVT/speccpu-1.1.5/bin/sysinfo
 Rev: r6538 of 2020-09-24 e8664e66d2d7080afeaa89d4b38e2f1c
 running on localhost.localdomain Wed Apr  7 13:34:04 2021

 SUT (System Under Test) info as seen by some common utilities.
 For more information on this section, see
    https://www.spec.org/cpu2017/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : Intel(R) Xeon(R) Gold 6346 CPU @ 3.10GHz
       2  "physical id"s (chips)
       64 "processors"
    cores, siblings (Caution: counting these is hw and system dependent. The following
    excerpts from /proc/cpuinfo might not be reliable.  Use with caution.)
       cpu cores : 16
       siblings  : 32
       physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
       physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

 From lscpu:
      Architecture:        x86_64
      CPU op-mode(s):      32-bit, 64-bit
      Byte Order:          Little Endian
      CPU(s):              64
      On-line CPU(s) list: 0-63
      Thread(s) per core:  2
      Core(s) per socket:  16
      Socket(s):           2
      NUMA node(s):        2
      Vendor ID:           GenuineIntel
      CPU family:          6
      Model:               106
      Model name:          Intel(R) Xeon(R) Gold 6346 CPU @ 3.10GHz
      Stepping:            6
      CPU MHz:             1154.028
      CPU max MHz:         3600.0000
      CPU min MHz:         800.0000
      BogoMIPS:            6200.00
      Virtualization:      VT-x
      L1d cache:           48K
      L1i cache:           32K
      L2 cache:            1280K
      L3 cache:            36864K
      NUMA node0 CPU(s):   0-15,32-47
      NUMA node1 CPU(s):   16-31,48-63
      Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
      pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp
      lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid
      aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16
      xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave
      avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 invpcid_single ssbd
      mba ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase
      tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm rdt_a avx512f avx512dq
      rdseed adx smap avx512ifma clflushopt clwb intel_pt avx512cd sha_ni avx512bw
      avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total
      cqm_mbm_local wbnoinvd dtherm ida arat pln pts hwp hwp_act_window hwp_epp
      hwp_pkg_req avx512vbmi umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni
      avx512_bitalg tme avx512_vpopcntdq la57 rdpid md_clear pconfig flush_l1d
      arch_capabilities

 /proc/cpuinfo cache data
    cache size : 36864 KB

 From numactl --hardware  WARNING: a numactl 'node' might or might not correspond to a
 physical chip.
   available: 2 nodes (0-1)
   node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 32 33 34 35 36 37 38 39 40 41 42 43
   44 45 46 47
   node 0 size: 515509 MB
   node 0 free: 514829 MB
   node 1 cpus: 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 48 49 50 51 52 53 54 55 56
   57 58 59 60 61 62 63
   node 1 size: 516058 MB
   node 1 free: 515040 MB
   node distances:
   node   0   1
     0:  10  20
     1:  20  10

 From /proc/meminfo
    MemTotal:       1056325748 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 /sbin/tuned-adm active
     Current active profile: throughput-performance

 /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has
    performance

 From /etc/*release* /etc/*version*
    os-release:
       NAME="Red Hat Enterprise Linux"
       VERSION="8.2 (Ootpa)"
       ID="rhel"
       ID_LIKE="fedora"
       VERSION_ID="8.2"
       PLATFORM_ID="platform:el8"
       PRETTY_NAME="Red Hat Enterprise Linux 8.2 (Ootpa)"
       ANSI_COLOR="0;31"
    redhat-release: Red Hat Enterprise Linux release 8.2 (Ootpa)
    system-release: Red Hat Enterprise Linux release 8.2 (Ootpa)
    system-release-cpe: cpe:/o:redhat:enterprise_linux:8.2:ga

 uname -a:
    Linux localhost.localdomain 4.18.0-193.el8.x86_64 #1 SMP Fri Mar 27 14:35:58 UTC 2020
    x86_64 x86_64 x86_64 GNU/Linux

 Kernel self-reported vulnerability status:

 CVE-2018-12207 (iTLB Multihit):                        Not affected
 CVE-2018-3620 (L1 Terminal Fault):                     Not affected
 Microarchitectural Data Sampling:                      Not affected
 CVE-2017-5754 (Meltdown):                              Not affected
 CVE-2018-3639 (Speculative Store Bypass):              Mitigation: Speculative Store
                                                        Bypass disabled via prctl and
                                                        seccomp
 CVE-2017-5753 (Spectre variant 1):                     Mitigation: usercopy/swapgs
                                                        barriers and __user pointer
                                                        sanitization
 CVE-2017-5715 (Spectre variant 2):                     Mitigation: Enhanced IBRS, IBPB:
                                                        conditional, RSB filling
 CVE-2020-0543 (Special Register Buffer Data Sampling): No status reported
 CVE-2019-11135 (TSX Asynchronous Abort):               Not affected


 SPEC is set to: /home/PVT/speccpu-1.1.5
    Filesystem     Type  Size  Used Avail Use% Mounted on
    /dev/sda3      xfs   330G   88G  243G  27% /home

 From /sys/devices/virtual/dmi/id
     Vendor:         FUJITSU
     Product:        PRIMERGY RX2540 M6
     Product Family: SERVER
     Serial:         EWAAxxxxxx

 Additional information from dmidecode follows.  WARNING: Use caution when you interpret
 this section. The 'dmidecode' program reads system data which is "intended to allow
 hardware to be accurately determined", but the intent may not be met, as there are
 frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
   Memory:
     32x Samsung M393A4K40DB3-CWE 32 GB 2 rank 3200

 BIOS:
    BIOS Vendor:       FUJITSU
    BIOS Version:      V1.0.0.0 R1.2.0 for D3891-A1x
    BIOS Date:         04/01/2021
    BIOS Revision:     1.2
    Firmware Revision: 3.20

 (End of data from sysinfo program)

Power Settings Notes

PTDaemon to measure power and temperature was run on a PRIMERGY RX2530 M5 as a controller
with 2x Intel Xeon Platinum 8280 CPU and 768 GB of memory using Windows Server 2012 R2.
Power management in the BIOS was default except for any settings mentioned in BIOS Configuration.
No power management settings were set in the management firmware.
The optional optical drive was not installed.
The run was started and observed through the management firmware.

Compiler Version Notes

==============================================================================
C       | 600.perlbench_s(base) 602.gcc_s(base) 605.mcf_s(base)
        | 625.x264_s(base) 657.xz_s(base)
------------------------------------------------------------------------------
Intel(R) C Compiler for applications running on Intel(R) 64, Version
  19.1.2.275 Build 20200604
Copyright (C) 1985-2020 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
C++     | 620.omnetpp_s(base) 623.xalancbmk_s(base) 631.deepsjeng_s(base)
        | 641.leela_s(base)
------------------------------------------------------------------------------
Intel(R) C++ Compiler for applications running on Intel(R) 64, Version
  19.1.2.275 Build 20200604
Copyright (C) 1985-2020 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
Fortran | 648.exchange2_s(base)
------------------------------------------------------------------------------
Intel(R) Fortran Intel(R) 64 Compiler for applications running on Intel(R)
  64, Version 19.1.2.275 Build 20200623
Copyright (C) 1985-2020 Intel Corporation.  All rights reserved.
------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 icc 

C++ benchmarks:

 icpc 

Fortran benchmarks:

 ifort 

Base Portability Flags

600.perlbench_s:  -DSPEC_LP64   -DSPEC_LINUX_X64 
602.gcc_s:  -DSPEC_LP64 
605.mcf_s:  -DSPEC_LP64 
620.omnetpp_s:  -DSPEC_LP64 
623.xalancbmk_s:  -DSPEC_LP64   -DSPEC_LINUX 
625.x264_s:  -DSPEC_LP64 
631.deepsjeng_s:  -DSPEC_LP64 
641.leela_s:  -DSPEC_LP64 
648.exchange2_s:  -DSPEC_LP64 
657.xz_s:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -m64   -qnextgen   -std=c11   -Wl,-plugin-opt=-x86-branches-within-32B-boundaries   -Wl,-z,muldefs   -xCORE-AVX2   -O3   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -fopenmp   -DSPEC_OPENMP   -L/usr/local/jemalloc64-5.0.1/lib   -ljemalloc 

C++ benchmarks:

 -m64   -qnextgen   -Wl,-plugin-opt=-x86-branches-within-32B-boundaries   -Wl,-z,muldefs   -xCORE-AVX2   -O3   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -L/usr/local/IntelCompiler19/compilers_and_libraries_2020.3.275/linux/compiler/lib/intel64_lin   -lqkmalloc 

Fortran benchmarks:

 -m64   -Wl,-plugin-opt=-x86-branches-within-32B-boundaries   -xCORE-AVX2   -O3   -ipo   -no-prec-div   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -mbranches-within-32B-boundaries 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/Fujitsu-Platform-Settings-V1.0-ICL-RevA.html,
http://www.spec.org/cpu2017/flags/Intel-ic19.1u1-official-linux64_revA.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/Fujitsu-Platform-Settings-V1.0-ICL-RevA.xml,
http://www.spec.org/cpu2017/flags/Intel-ic19.1u1-official-linux64_revA.xml.