|
Lenovo Global Technology ThinkSystem SR665 |
SPECspeed®2017_int_base = 8.97 |
|
SPECspeed®2017_int_peak = 9.21 |
| CPU2017 License: | 9017 | Test Date: | Apr-2020 |
|---|---|---|---|
| Test Sponsor: | Lenovo Global Technology | Hardware Availability: | Jun-2020 |
| Tested by: | Lenovo Global Technology | Software Availability: | Nov-2019 |
Benchmark result graphs are available in the PDF report.
| Hardware | |
|---|---|
| CPU Name: | AMD EPYC 7742 |
| Max MHz: | 3400 |
| Nominal: | 2250 |
| Enabled: | 128 cores, 2 chips |
| Orderable: | 1,2 chips |
| Cache L1: | 32 KB I + 32 KB D on chip per core |
| L2: | 512 KB I+D on chip per core |
| L3: | 256 MB I+D on chip per chip, 16 MB shared / 4 cores |
| Other: | None |
| Memory: | 512 GB (16 x 32 GB 2Rx4 PC4-3200AA-R) |
| Storage: | 1 x 960 GB SATA SSD |
| Other: | None |
| Software | |
|---|---|
| OS: | Red Hat Enterprise Linux 8.1 (Ootpa) Kernel 4.18.0-147.el8.x86_64 |
| Compiler: | C/C++/Fortran: Version 2.0.0 of AOCC |
| Parallel: | Yes |
| Firmware: | Lenovo BIOS Version D8E105F 1.00 released Mar-2020 |
| File System: | xfs |
| System State: | Run level 3 (multi-user) |
| Base Pointers: | 64-bit |
| Peak Pointers: | 32/64-bit |
| Other: | jemalloc: jemalloc memory allocator library v5.1.0 |
| Power Management: | BIOS set to prefer performance at the cost of additional power usage |
| Power | |
|---|---|
| Max. Power (W): | 646.27 |
| Idle Power (W): | 115.4 |
| Min. Temperature (C): | 20.50 |
| Elevation (m): | 43 |
| Line Standard: | 220 V / 50 Hz / 1 phase / 1 wire |
| Provisioning: | Line-powered |
| Power Settings | |
|---|---|
| Management FW: | Version 2.00 of D8BT05U |
| Memory Mode: | Normal |
| Power-Relevant Hardware | |
|---|---|
| Power Supply: | 1 x 1100 W (non-redundant) |
| Details: | ThinkSystem 1100W Platinum Power Supply SP57A14700 |
| Backplane: | 8 x 2.5-inch HDD back plane |
| Other Storage: | RAID 930-8i 2GB Flash PCIe 12Gb Adapter |
| Storage Model #s: | 6FC81AB0 |
| NICs Installed: | 1 x ThinkSystem Ethernet 4-port Adaptor @ 1 Gb |
| NICs Enabled (FW/OS): | 4 / 1 |
| NICs Connected/Speed: | 1 @ 1 Gb |
| Other HW Model #s: | 6 x High Performance fans |
| Power Analyzer | |
|---|---|
| Power Analyzer: | WIN:8888 |
| Hardware Vendor: | YOKOGAWA, Inc. |
| Model: | YokogawaWT310E |
| Serial Number: | C3UG05013E |
| Input Connection: | Default |
| Metrology Institute: | CNAS |
| Calibration By: | China CEPREI Laboratory |
| Calibration Label: | 1GA19013841-0005 |
| Calibration Date: | 27-Sep-2019 |
| PTDaemon™ Version: | 1.9.1 (a2d19f26; 2019-07-17) |
| Setup Description: | Connected to PSU1 |
| Current Ranges Used: | 2.5A |
| Voltage Range Used: | 300V |
| Temperature Meter | |
|---|---|
| Temperature Meter: | WIN:8889 |
| Hardware Vendor: | Digi International, Inc. |
| Model: | DigiWATCHPORT_H |
| Serial Number: | COM1 |
| Input Connection: | USB |
| PTDaemon Version: | 1.9.1 (a2d19f26; 2019-07-17) |
| Setup Description: | 50 mm in front of SUT main intake |
| Benchmark | Threads | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPECspeed®2017_int_base | 8.97 | ||||||||||||||||||
| SPECspeed®2017_int_energy_base | 44.2 | ||||||||||||||||||
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
| 600.perlbench_s | 128 | 363 | 4.89 | 78.6 | 24.5 | 217 | 222 | 359 | 4.95 | 77.8 | 24.7 | 217 | 221 | 365 | 4.87 | 79.4 | 24.3 | 218 | 225 |
| 602.gcc_s | 128 | 407 | 9.79 | 89.5 | 48.4 | 220 | 232 | 408 | 9.76 | 90.0 | 48.1 | 220 | 232 | 407 | 9.79 | 89.8 | 48.2 | 221 | 232 |
| 605.mcf_s | 128 | 310 | 15.2 | 68.6 | 75.1 | 221 | 235 | 310 | 15.2 | 68.5 | 75.2 | 221 | 235 | 310 | 15.2 | 68.8 | 74.9 | 222 | 236 |
| 620.omnetpp_s | 128 | 320 | 5.10 | 69.9 | 25.4 | 219 | 220 | 323 | 5.05 | 70.7 | 25.1 | 219 | 221 | 325 | 5.02 | 71.4 | 24.9 | 219 | 222 |
| 623.xalancbmk_s | 128 | 149 | 9.49 | 32.4 | 47.5 | 217 | 218 | 149 | 9.50 | 32.3 | 47.6 | 217 | 218 | 149 | 9.49 | 32.4 | 47.5 | 217 | 218 |
| 625.x264_s | 128 | 140 | 12.6 | 30.3 | 63.3 | 217 | 218 | 139 | 12.7 | 30.2 | 63.5 | 217 | 218 | 139 | 12.7 | 30.1 | 63.9 | 217 | 218 |
| 631.deepsjeng_s | 128 | 294 | 4.87 | 64.0 | 24.4 | 217 | 231 | 291 | 4.92 | 63.2 | 24.7 | 217 | 236 | 290 | 4.94 | 63.0 | 24.7 | 217 | 235 |
| 641.leela_s | 128 | 397 | 4.29 | 85.6 | 21.6 | 215 | 216 | 398 | 4.29 | 85.6 | 21.6 | 215 | 216 | 398 | 4.29 | 85.6 | 21.6 | 215 | 222 |
| 648.exchange2_s | 128 | 176 | 16.7 | 38.1 | 83.9 | 216 | 217 | 175 | 16.8 | 37.9 | 84.5 | 216 | 218 | 175 | 16.8 | 37.8 | 84.6 | 216 | 217 |
| 657.xz_s | 128 | 289 | 21.4 | 72.1 | 93.3 | 249 | 640 | 289 | 21.4 | 72.4 | 93.0 | 250 | 641 | 290 | 21.3 | 72.0 | 93.5 | 249 | 640 |
| Benchmark | Threads | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SPECspeed®2017_int_peak | 9.21 | ||||||||||||||||||
| SPECspeed®2017_int_energy_peak | 45.4 | ||||||||||||||||||
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
| 600.perlbench_s | 1 | 342 | 5.18 | 74.1 | 26.0 | 216 | 219 | 343 | 5.18 | 74.2 | 25.9 | 217 | 220 | 342 | 5.19 | 74.4 | 25.9 | 217 | 222 |
| 602.gcc_s | 1 | 406 | 9.80 | 89.4 | 48.4 | 220 | 231 | 406 | 9.80 | 89.5 | 48.4 | 220 | 232 | 407 | 9.79 | 89.7 | 48.3 | 221 | 232 |
| 605.mcf_s | 1 | 289 | 16.3 | 64.0 | 80.5 | 221 | 235 | 289 | 16.3 | 64.0 | 80.4 | 221 | 234 | 289 | 16.3 | 64.0 | 80.5 | 221 | 234 |
| 620.omnetpp_s | 1 | 322 | 5.07 | 70.5 | 25.2 | 219 | 222 | 318 | 5.13 | 69.7 | 25.5 | 219 | 220 | 322 | 5.06 | 70.6 | 25.1 | 219 | 220 |
| 623.xalancbmk_s | 1 | 138 | 10.3 | 29.9 | 51.5 | 216 | 217 | 138 | 10.3 | 29.9 | 51.4 | 217 | 218 | 138 | 10.3 | 29.8 | 51.6 | 217 | 217 |
| 625.x264_s | 1 | 135 | 13.0 | 29.2 | 65.7 | 216 | 218 | 135 | 13.0 | 29.4 | 65.2 | 217 | 218 | 136 | 13.0 | 29.5 | 65.0 | 217 | 218 |
| 631.deepsjeng_s | 1 | 284 | 5.05 | 61.5 | 25.3 | 217 | 231 | 287 | 4.99 | 62.6 | 24.9 | 218 | 234 | 284 | 5.05 | 61.7 | 25.3 | 217 | 232 |
| 641.leela_s | 128 | 397 | 4.29 | 85.6 | 21.6 | 215 | 216 | 398 | 4.29 | 85.6 | 21.6 | 215 | 216 | 398 | 4.29 | 85.6 | 21.6 | 215 | 222 |
| 648.exchange2_s | 128 | 176 | 16.7 | 38.1 | 83.9 | 216 | 217 | 175 | 16.8 | 37.9 | 84.5 | 216 | 218 | 175 | 16.8 | 37.8 | 84.6 | 216 | 217 |
| 657.xz_s | 128 | 289 | 21.4 | 71.9 | 93.6 | 249 | 640 | 290 | 21.4 | 72.3 | 93.1 | 250 | 646 | 289 | 21.4 | 71.9 | 93.6 | 248 | 639 |
The AMD64 AOCC Compiler Suite is available at http://developer.amd.com/amd-aocc/
The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details.
'ulimit -s unlimited' was used to set environment stack size 'ulimit -l 2097152' was used to set environment locked pages in memory limit runcpu command invoked through numactl i.e.: numactl --interleave=all runcpu <etc> Set dirty_ratio=8 to limit dirty cache to 8% of memory Set swappiness=1 to swap only if necessary Set zone_reclaim_mode=1 to free local node memory and avoid remote memory sync then drop_caches=3 to reset caches before invoking runcpu dirty_ratio, swappiness, zone_reclaim_mode and drop_caches were all set using privileged echo (e.g. echo 1 > /proc/sys/vm/swappiness). Transparent huge pages set to 'always' for this run (OS default)
Environment variables set by runcpu before the start of the run:
GOMP_CPU_AFFINITY = "0-127"
LD_LIBRARY_PATH =
"/home/cpu2017-1.1.0-amd-rome-aocc200-C1/amd_speed_aocc200_rome_C_lib/64
;/home/cpu2017-1.1.0-amd-rome-aocc200-C1/amd_speed_aocc200_rome_C_lib/32
:"
MALLOC_CONF = "retain:true"
OMP_DYNAMIC = "false"
OMP_SCHEDULE = "static"
OMP_STACKSIZE = "128M"
OMP_THREAD_LIMIT = "128"
Environment variables set by runcpu during the 600.perlbench_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 602.gcc_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 605.mcf_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 620.omnetpp_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 623.xalancbmk_s peak run:
GOMP_CPU_AFFINITY = "0"
OMP_STACKSIZE = "128M"
Environment variables set by runcpu during the 625.x264_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 631.deepsjeng_s peak run:
GOMP_CPU_AFFINITY = "0"
Environment variables set by runcpu during the 657.xz_s peak run:
GOMP_CPU_AFFINITY = "0-127"
Binaries were compiled on a system with 2x AMD EPYC 7601 CPU + 512GB Memory using Fedora 26 NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2018-3640 (Spectre variant 3a) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2018-3639 (Spectre variant 4) is mitigated in the system as tested and documented. jemalloc: configured and built with GCC v9.1.0 in Ubuntu 19.04 with -O3 -znver2 -flto jemalloc 5.1.0 is available here: https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2
BIOS settings:
Choose Operating Mode set to Maximum Performance and then set it to Custom Mode
SMT Mode set to Disable
NUMA nodes per socket set to NPS4
Sysinfo program /home/cpu2017-1.1.0-amd-rome-aocc200-C1/bin/sysinfo
Rev: r6365 of 2019-08-21 295195f888a3d7edb1e6e46a485a0011
running on localhost.localdomain Fri Jun 22 19:21:37 2018
SUT (System Under Test) info as seen by some common utilities.
For more information on this section, see
https://www.spec.org/cpu2017/Docs/config.html#sysinfo
From /proc/cpuinfo
model name : AMD EPYC 7742 64-Core Processor
2 "physical id"s (chips)
128 "processors"
cores, siblings (Caution: counting these is hw and system dependent. The following
excerpts from /proc/cpuinfo might not be reliable. Use with caution.)
cpu cores : 64
siblings : 64
physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
53 54 55 56 57 58 59 60 61 62 63
physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
53 54 55 56 57 58 59 60 61 62 63
From lscpu:
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 128
On-line CPU(s) list: 0-127
Thread(s) per core: 1
Core(s) per socket: 64
Socket(s): 2
NUMA node(s): 8
Vendor ID: AuthenticAMD
CPU family: 23
Model: 49
Model name: AMD EPYC 7742 64-Core Processor
Stepping: 0
CPU MHz: 3074.115
CPU max MHz: 2250.0000
CPU min MHz: 1500.0000
BogoMIPS: 4491.64
Virtualization: AMD-V
L1d cache: 32K
L1i cache: 32K
L2 cache: 512K
L3 cache: 16384K
NUMA node0 CPU(s): 0-15
NUMA node1 CPU(s): 16-31
NUMA node2 CPU(s): 32-47
NUMA node3 CPU(s): 48-63
NUMA node4 CPU(s): 64-79
NUMA node5 CPU(s): 80-95
NUMA node6 CPU(s): 96-111
NUMA node7 CPU(s): 112-127
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm
constant_tsc rep_good nopl xtopology nonstop_tsc cpuid extd_apicid aperfmperf pni
pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c
rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch
osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb
cat_l3 cdp_l3 hw_pstate sme ssbd mba sev ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2
smep bmi2 cqm rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1
xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr
wbnoinvd arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid
decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif umip rdpid
overflow_recov succor smca
/proc/cpuinfo cache data
cache size : 512 KB
From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a
physical chip.
available: 8 nodes (0-7)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 0 size: 64311 MB
node 0 free: 64115 MB
node 1 cpus: 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
node 1 size: 64506 MB
node 1 free: 64375 MB
node 2 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
node 2 size: 64506 MB
node 2 free: 64174 MB
node 3 cpus: 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
node 3 size: 64469 MB
node 3 free: 64378 MB
node 4 cpus: 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
node 4 size: 64506 MB
node 4 free: 64352 MB
node 5 cpus: 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95
node 5 size: 64506 MB
node 5 free: 64353 MB
node 6 cpus: 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111
node 6 size: 64506 MB
node 6 free: 64398 MB
node 7 cpus: 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127
node 7 size: 64507 MB
node 7 free: 64385 MB
node distances:
node 0 1 2 3 4 5 6 7
0: 10 12 12 12 32 32 32 32
1: 12 10 12 12 32 32 32 32
2: 12 12 10 12 32 32 32 32
3: 12 12 12 10 32 32 32 32
4: 32 32 32 32 10 12 12 12
5: 32 32 32 32 12 10 12 12
6: 32 32 32 32 12 12 10 12
7: 32 32 32 32 12 12 12 10
From /proc/meminfo
MemTotal: 528200880 kB
HugePages_Total: 0
Hugepagesize: 2048 kB
From /etc/*release* /etc/*version*
os-release:
NAME="Red Hat Enterprise Linux"
VERSION="8.1 (Ootpa)"
ID="rhel"
ID_LIKE="fedora"
VERSION_ID="8.1"
PLATFORM_ID="platform:el8"
PRETTY_NAME="Red Hat Enterprise Linux 8.1 (Ootpa)"
ANSI_COLOR="0;31"
redhat-release: Red Hat Enterprise Linux release 8.1 (Ootpa)
system-release: Red Hat Enterprise Linux release 8.1 (Ootpa)
system-release-cpe: cpe:/o:redhat:enterprise_linux:8.1:ga
uname -a:
Linux localhost.localdomain 4.18.0-147.el8.x86_64 #1 SMP Thu Sep 26 15:52:44 UTC 2019
x86_64 x86_64 x86_64 GNU/Linux
Kernel self-reported vulnerability status:
CVE-2018-3620 (L1 Terminal Fault): Not affected
Microarchitectural Data Sampling: Not affected
CVE-2017-5754 (Meltdown): Not affected
CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled
via prctl and seccomp
CVE-2017-5753 (Spectre variant 1): Mitigation: usercopy/swapgs barriers and __user
pointer sanitization
CVE-2017-5715 (Spectre variant 2): Mitigation: Full AMD retpoline, IBPB:
conditional, IBRS_FW, STIBP: disabled, RSB
filling
run-level 3 Jun 22 19:12
SPEC is set to: /home/cpu2017-1.1.0-amd-rome-aocc200-C1
Filesystem Type Size Used Avail Use% Mounted on
/dev/sdb2 xfs 838G 30G 808G 4% /home
From /sys/devices/virtual/dmi/id
BIOS: Lenovo D8E105F-1.00 03/19/2020
Vendor: Lenovo
Product: ThinkSystem SR665 MB
Product Family: ThinkSystem
Serial: 1234567890
Additional information from dmidecode follows. WARNING: Use caution when you interpret
this section. The 'dmidecode' program reads system data which is "intended to allow
hardware to be accurately determined", but the intent may not be met, as there are
frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
Memory:
16x Samsung M393A4K40DB3-CWE 32 kB 2 rank 3200
16x Unknown Unknown
(End of data from sysinfo program)
==============================================================================
C | 600.perlbench_s(base, peak) 602.gcc_s(base, peak) 605.mcf_s(base,
| peak) 625.x264_s(base, peak) 657.xz_s(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
==============================================================================
C++ | 623.xalancbmk_s(peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: i386-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
==============================================================================
C++ | 620.omnetpp_s(base, peak) 623.xalancbmk_s(base)
| 631.deepsjeng_s(base, peak) 641.leela_s(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
==============================================================================
C++ | 623.xalancbmk_s(peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: i386-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
==============================================================================
C++ | 620.omnetpp_s(base, peak) 623.xalancbmk_s(base)
| 631.deepsjeng_s(base, peak) 641.leela_s(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
==============================================================================
Fortran | 648.exchange2_s(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------
| 600.perlbench_s: | -DSPEC_LINUX_X64 -DSPEC_LP64 |
| 602.gcc_s: | -DSPEC_LP64 |
| 605.mcf_s: | -DSPEC_LP64 |
| 620.omnetpp_s: | -DSPEC_LP64 |
| 623.xalancbmk_s: | -DSPEC_LINUX -DSPEC_LP64 |
| 625.x264_s: | -DSPEC_LP64 |
| 631.deepsjeng_s: | -DSPEC_LP64 |
| 641.leela_s: | -DSPEC_LP64 |
| 648.exchange2_s: | -DSPEC_LP64 |
| 657.xz_s: | -DSPEC_LP64 |
| -Wno-return-type |
| -Wno-return-type |
| -Wno-return-type |
| 600.perlbench_s: | -DSPEC_LINUX_X64 -DSPEC_LP64 |
| 602.gcc_s: | -DSPEC_LP64 |
| 605.mcf_s: | -DSPEC_LP64 |
| 620.omnetpp_s: | -DSPEC_LP64 |
| 623.xalancbmk_s: | -DSPEC_LINUX -D_FILE_OFFSET_BITS=64 |
| 625.x264_s: | -DSPEC_LP64 |
| 631.deepsjeng_s: | -DSPEC_LP64 |
| 641.leela_s: | -DSPEC_LP64 |
| 648.exchange2_s: | -DSPEC_LP64 |
| 657.xz_s: | -DSPEC_LP64 |
| 648.exchange2_s: | basepeak = yes |