Lenovo Global Technology ThinkSystem SR655 |
SPECspeed®2017_fp_base = 130 |
SPECspeed®2017_fp_peak = 130 |
CPU2017 License: | 9017 | Test Date: | Sep-2019 |
---|---|---|---|
Test Sponsor: | Lenovo Global Technology | Hardware Availability: | Aug-2019 |
Tested by: | Lenovo Global Technology | Software Availability: | Aug-2019 |
Benchmark result graphs are available in the PDF report.
Hardware | |
---|---|
CPU Name: | AMD EPYC 7702P |
Max MHz: | 3350 |
Nominal: | 2000 |
Enabled: | 64 cores, 1 chip |
Orderable: | 1 chip |
Cache L1: | 32 KB I + 32 KB D on chip per core |
L2: | 512 KB I+D on chip per core |
L3: | 256 MB I+D on chip per chip, 16 MB shared / 4 cores |
Other: | None |
Memory: | 256 GB (8 x 32 GB 2Rx4 PC4-3200AA-R) |
Storage: | 1 x 960 GB SATA SSD |
Other: | None |
Software | |
---|---|
OS: | SUSE Linux Enterprise Server 15 SP1 (x86_64) Kernel 4.12.14-195-default |
Compiler: | C/C++/Fortran: Version 2.0.0 of AOCC |
Parallel: | Yes |
Firmware: | Lenovo BIOS Version CFE103L released Aug-2019 |
File System: | xfs |
System State: | Run level 3 (multi-user) |
Base Pointers: | 64-bit |
Peak Pointers: | 64-bit |
Other: | jemalloc: jemalloc memory allocator library v5.1.0 |
Power Management: | Disabled |
Power | |
---|---|
Max. Power (W): | 312.58 |
Idle Power (W): | 113.24 |
Min. Temperature (C): | 21.81 |
Elevation (m): | 43 |
Line Standard: | 220 V / 50 Hz / 1 phase / 1 wire |
Provisioning: | Line-powered |
Power Settings | |
---|---|
Management FW: | Version 1.25 of AMBT03I |
Memory Mode: | Normal |
Power-Relevant Hardware | |
---|---|
Power Supply: | 1 x 750 W (non-redundant) |
Details: | Lenovo 750W Platinum Hot-SWap Power Supply |
Backplane: | hot-swap drive bays |
Other Storage: | None |
Storage Model #s: | MTFDDAK960TTDN |
NICs Installed: | 1 x 4-port OCP Ethernet Adapter @ 1 Gb |
NICs Enabled (FW/OS): | 4 / 1 |
NICs Connected/Speed: | 1 @ 1 Gb |
Other HW Model #s: | None |
Power Analyzer | |
---|---|
Power Analyzer: | WIN:8888 |
Hardware Vendor: | YOKOGAWA, Inc. |
Model: | YokogawaWT310 |
Serial Number: | C2RA21002V |
Input Connection: | Default |
Metrology Institute: | CNAS |
Calibration By: | China CEPREI Laboratory |
Calibration Label: | 1GA18013618-0009 |
Calibration Date: | 29-Oct-2018 |
PTDaemon™ Version: | 1.9.1 (a2d19f26; 2019-07-17) |
Setup Description: | Connected to PSU1 |
Current Ranges Used: | 2A |
Voltage Range Used: | 300V |
Temperature Meter | |
---|---|
Temperature Meter: | WIN:8889 |
Hardware Vendor: | Digi Intermational, Inc. |
Model: | DigiWATCHPORT_H |
Serial Number: | COM1 |
Input Connection: | USB |
PTDaemon Version: | 1.9.1 (a2d19f26; 2019-07-17) |
Setup Description: | 50 mm in front of SUT main intake |
Benchmark | Threads | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPECspeed®2017_fp_base | 130 | ||||||||||||||||||
SPECspeed®2017_fp_energy_base | 501 | ||||||||||||||||||
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
603.bwaves_s | 64 | 173 | 342 | 53.1 | 1210 | 308 | 311 | 173 | 342 | 53.2 | 1210 | 308 | 312 | 173 | 342 | 53.3 | 1210 | 309 | 313 |
607.cactuBSSN_s | 64 | 75.3 | 221 | 21.9 | 831 | 291 | 299 | 75.3 | 221 | 22.0 | 829 | 292 | 299 | 75.5 | 221 | 21.9 | 832 | 290 | 298 |
619.lbm_s | 64 | 166 | 31.6 | 50.0 | 119 | 302 | 306 | 166 | 31.6 | 50.4 | 118 | 304 | 308 | 166 | 31.6 | 49.8 | 119 | 301 | 305 |
621.wrf_s | 64 | 92.3 | 143 | 25.3 | 572 | 274 | 276 | 92.1 | 144 | 25.2 | 572 | 274 | 277 | 92.3 | 143 | 25.2 | 572 | 274 | 277 |
627.cam4_s | 64 | 97.5 | 90.9 | 28.5 | 339 | 292 | 306 | 97.6 | 90.8 | 28.5 | 338 | 293 | 306 | 97.3 | 91.1 | 28.4 | 340 | 292 | 306 |
628.pop2_s | 64 | 167 | 71.3 | 47.2 | 277 | 283 | 288 | 167 | 70.9 | 47.4 | 275 | 283 | 288 | 168 | 70.5 | 47.7 | 273 | 283 | 288 |
638.imagick_s | 64 | 66.3 | 218 | 16.6 | 946 | 251 | 277 | 66.3 | 218 | 16.7 | 942 | 252 | 278 | 66.2 | 218 | 16.7 | 940 | 253 | 278 |
644.nab_s | 64 | 58.4 | 299 | 16.2 | 1180 | 276 | 284 | 58.5 | 299 | 16.2 | 1180 | 276 | 284 | 58.5 | 299 | 16.2 | 1170 | 277 | 284 |
649.fotonik3d_s | 64 | 137 | 66.4 | 38.6 | 265 | 281 | 304 | 138 | 66.3 | 38.7 | 264 | 282 | 304 | 137 | 66.3 | 38.6 | 265 | 281 | 303 |
654.roms_s | 64 | 108 | 146 | 32.8 | 537 | 304 | 309 | 108 | 146 | 32.9 | 535 | 305 | 309 | 108 | 146 | 32.9 | 535 | 304 | 309 |
Benchmark | Threads | Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
Seconds | Ratio | Energy (kJ) |
Energy Ratio |
Average Power |
Maximum Power |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SPECspeed®2017_fp_peak | 130 | ||||||||||||||||||
SPECspeed®2017_fp_energy_peak | 502 | ||||||||||||||||||
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | |||||||||||||||||||
603.bwaves_s | 64 | 172 | 343 | 53.1 | 1210 | 308 | 312 | 172 | 342 | 53.1 | 1210 | 308 | 311 | 172 | 342 | 53.1 | 1210 | 308 | 312 |
607.cactuBSSN_s | 64 | 75.4 | 221 | 21.9 | 831 | 291 | 298 | 74.8 | 223 | 21.7 | 839 | 291 | 299 | 75.2 | 222 | 21.9 | 833 | 291 | 299 |
619.lbm_s | 64 | 166 | 31.6 | 50.0 | 119 | 302 | 306 | 166 | 31.6 | 50.4 | 118 | 304 | 308 | 166 | 31.6 | 49.8 | 119 | 301 | 305 |
621.wrf_s | 64 | 92.2 | 143 | 25.2 | 573 | 273 | 276 | 92.2 | 143 | 25.2 | 574 | 273 | 277 | 92.4 | 143 | 25.2 | 573 | 273 | 277 |
627.cam4_s | 64 | 97.3 | 91.1 | 28.4 | 340 | 291 | 306 | 97.4 | 91.0 | 28.4 | 339 | 292 | 306 | 97.6 | 90.8 | 28.5 | 338 | 292 | 306 |
628.pop2_s | 64 | 167 | 71.3 | 47.2 | 277 | 283 | 288 | 167 | 70.9 | 47.4 | 275 | 283 | 288 | 168 | 70.5 | 47.7 | 273 | 283 | 288 |
638.imagick_s | 64 | 66.3 | 218 | 16.6 | 946 | 251 | 277 | 66.3 | 218 | 16.7 | 942 | 252 | 278 | 66.2 | 218 | 16.7 | 940 | 253 | 278 |
644.nab_s | 64 | 58.4 | 299 | 16.2 | 1180 | 276 | 284 | 58.5 | 299 | 16.2 | 1180 | 276 | 284 | 58.5 | 299 | 16.2 | 1170 | 277 | 284 |
649.fotonik3d_s | 64 | 137 | 66.6 | 38.5 | 266 | 281 | 303 | 138 | 66.1 | 38.7 | 264 | 281 | 303 | 137 | 66.4 | 38.7 | 264 | 282 | 304 |
654.roms_s | 64 | 107 | 147 | 32.6 | 541 | 304 | 310 | 107 | 147 | 32.5 | 541 | 304 | 309 | 107 | 147 | 32.4 | 543 | 303 | 309 |
The AMD64 AOCC Compiler Suite is available at http://developer.amd.com/amd-aocc/
The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details.
'ulimit -s unlimited' was used to set environment stack size 'ulimit -l 2097152' was used to set environment locked pages in memory limit runcpu command invoked through numactl i.e.: numactl --interleave=all runcpu <etc> Set dirty_ratio=8 to limit dirty cache to 8% of memory Set swappiness=1 to swap only if necessary Set zone_reclaim_mode=1 to free local node memory and avoid remote memory sync then drop_caches=3 to reset caches before invoking runcpu dirty_ratio, swappiness, zone_reclaim_mode and drop_caches were all set using privileged echo (e.g. echo 1 > /proc/sys/vm/swappiness). Transparent huge pages set to 'always' for this run (OS default)
Environment variables set by runcpu before the start of the run: GOMP_CPU_AFFINITY = "0-63" LD_LIBRARY_PATH = "/home/cpu2017-1.1.0-amd-rome-aocc200-C1/amd_speed_aocc200_rome_C_lib/64 ;/home/cpu2017-1.1.0-amd-rome-aocc200-C1/amd_speed_aocc200_rome_C_lib/32 :" MALLOC_CONF = "retain:true" OMP_DYNAMIC = "false" OMP_SCHEDULE = "static" OMP_STACKSIZE = "128M" OMP_THREAD_LIMIT = "64" Environment variables set by runcpu during the 603.bwaves_s peak run: GOMP_CPU_AFFINITY = "0-63" Environment variables set by runcpu during the 607.cactuBSSN_s peak run: GOMP_CPU_AFFINITY = "0-63" Environment variables set by runcpu during the 621.wrf_s peak run: GOMP_CPU_AFFINITY = "0-63" Environment variables set by runcpu during the 627.cam4_s peak run: GOMP_CPU_AFFINITY = "0-63" Environment variables set by runcpu during the 649.fotonik3d_s peak run: GOMP_CPU_AFFINITY = "0-63" Environment variables set by runcpu during the 654.roms_s peak run: GOMP_CPU_AFFINITY = "0-63"
Binaries were compiled on a system with 2x AMD EPYC 7601 CPU + 512GB Memory using Fedora 26 NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2018-3640 (Spectre variant 3a) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2018-3639 (Spectre variant 4) is mitigated in the system as tested and documented. jemalloc: configured and built with GCC v9.1.0 in Ubuntu 19.04 with -O3 -znver2 -flto jemalloc 5.1.0 is available here: https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2
BIOS settings: cTDP Control set to Manual cTDP set to 200 Memory Speed set to Auto SMT Mode set to Disabled EfficiencyModeEn set to Auto Sysinfo program /home/cpu2017-1.1.0-amd-rome-aocc200-C1/bin/sysinfo Rev: r6365 of 2019-08-21 295195f888a3d7edb1e6e46a485a0011 running on linux-01om Wed Sep 25 21:21:31 2019 SUT (System Under Test) info as seen by some common utilities. For more information on this section, see https://www.spec.org/cpu2017/Docs/config.html#sysinfo From /proc/cpuinfo model name : AMD EPYC 7702P 64-Core Processor 1 "physical id"s (chips) 64 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 64 siblings : 64 physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 From lscpu: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian Address sizes: 43 bits physical, 48 bits virtual CPU(s): 64 On-line CPU(s) list: 0-63 Thread(s) per core: 1 Core(s) per socket: 64 Socket(s): 1 NUMA node(s): 1 Vendor ID: AuthenticAMD CPU family: 23 Model: 49 Model name: AMD EPYC 7702P 64-Core Processor Stepping: 0 CPU MHz: 2000.000 CPU max MHz: 2000.0000 CPU min MHz: 1500.0000 BogoMIPS: 3992.40 Virtualization: AMD-V L1d cache: 32K L1i cache: 32K L2 cache: 512K L3 cache: 16384K NUMA node0 CPU(s): 0-63 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl xtopology nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_l2 mwaitx cpb cat_l3 cdp_l3 hw_pstate sme ssbd sev ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 cqm rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif umip rdpid overflow_recov succor smca /proc/cpuinfo cache data cache size : 512 KB From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a physical chip. available: 1 nodes (0) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 node 0 size: 257758 MB node 0 free: 256922 MB node distances: node 0 0: 10 From /proc/meminfo MemTotal: 263944348 kB HugePages_Total: 0 Hugepagesize: 2048 kB From /etc/*release* /etc/*version* os-release: NAME="SLES" VERSION="15-SP1" VERSION_ID="15.1" PRETTY_NAME="SUSE Linux Enterprise Server 15 SP1" ID="sles" ID_LIKE="suse" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:suse:sles:15:sp1" uname -a: Linux linux-01om 4.12.14-195-default #1 SMP Tue May 7 10:55:11 UTC 2019 (8fba516) x86_64 x86_64 x86_64 GNU/Linux Kernel self-reported vulnerability status: CVE-2018-3620 (L1 Terminal Fault): Not affected Microarchitectural Data Sampling: Not affected CVE-2017-5754 (Meltdown): Not affected CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled via prctl and seccomp CVE-2017-5753 (Spectre variant 1): Mitigation: __user pointer sanitization CVE-2017-5715 (Spectre variant 2): Mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, STIBP: disabled, RSB filling run-level 3 Sep 25 21:16 SPEC is set to: /home/cpu2017-1.1.0-amd-rome-aocc200-C1 Filesystem Type Size Used Avail Use% Mounted on /dev/sda2 xfs 893G 55G 839G 7% / From /sys/devices/virtual/dmi/id BIOS: Lenovo CFE103L 08/19/2019 Vendor: Lenovo Product: ThinkSystem SR655 -[7Y00000000]- Product Family: ThinkSystem Serial: 0123456789 Additional information from dmidecode follows. WARNING: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. Memory: 8x Samsung M393A4K40DB2-CWE 32 kB 2 rank 3200 8x Unknown Unknown (End of data from sysinfo program)
============================================================================== C | 619.lbm_s(base, peak) 638.imagick_s(base, peak) | 644.nab_s(base, peak) ------------------------------------------------------------------------------ AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin ------------------------------------------------------------------------------ ============================================================================== C++, C, Fortran | 607.cactuBSSN_s(base, peak) ------------------------------------------------------------------------------ AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin ------------------------------------------------------------------------------ ============================================================================== Fortran | 603.bwaves_s(base, peak) 649.fotonik3d_s(base, peak) | 654.roms_s(base, peak) ------------------------------------------------------------------------------ AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin ------------------------------------------------------------------------------ ============================================================================== Fortran, C | 621.wrf_s(base, peak) 627.cam4_s(base, peak) | 628.pop2_s(base, peak) ------------------------------------------------------------------------------ AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin ------------------------------------------------------------------------------
clang |
flang |
flang clang |
clang++ clang flang |
603.bwaves_s: | -DSPEC_LP64 |
607.cactuBSSN_s: | -DSPEC_LP64 |
619.lbm_s: | -DSPEC_LP64 |
621.wrf_s: | -DSPEC_CASE_FLAG -Mbyteswapio -DSPEC_LP64 |
627.cam4_s: | -DSPEC_CASE_FLAG -DSPEC_LP64 |
628.pop2_s: | -DSPEC_CASE_FLAG -Mbyteswapio -DSPEC_LP64 |
638.imagick_s: | -DSPEC_LP64 |
644.nab_s: | -DSPEC_LP64 |
649.fotonik3d_s: | -DSPEC_LP64 |
654.roms_s: | -DSPEC_LP64 |
-Wno-return-type |
-Wno-return-type |
-Wno-return-type |
-Wno-return-type |
clang |
flang |
flang clang |
clang++ clang flang |
Same as Base Portability Flags
619.lbm_s: | basepeak = yes |
638.imagick_s: | basepeak = yes |
644.nab_s: | basepeak = yes |