# Invocation command line: # /home/memory/speccpu/bin/harness/runcpu --define default-platform-flags --copies 224 --configfile ic18.0-lin-core-avx2-rate-20170901.cfg --define smt-on --define cores=112 --define physicalfirst --define invoke_with_interleave --define drop_caches --tune base --output_format all --nopower --runmode rate --tune base --size refrate fprate # output_root was not used for this run ############################################################################ #------------------------------------------------------------------------------ # This is a sample SPEC CPU2017 config file. It is applicable for: # # Compiler name/version: Intel(R) C/C++ and Fortran 18.0.0.128 Compilers for Linux # Operating system version: Redhat Enterprise Linux 7.4, GLIBC 2.17 # Hardware: Intel(R) processors supporting CORE-AVX2 tuning # # If you wish to build your own: # (1) Copy this to a new name # cd %SPEC%/config # copy this.cfg that.cfg # (2) Change items that are marked 'EDIT' (search for it) # # If you have different software or hardware, this config file may not work. # You may find a better config file for your system next to posted results: # http://www.spec.org/cpu2017/results # # Compiler issues: Contact your compiler vendor, not SPEC. # For SPEC help: http://www.spec.org/auto/cpu2017/Docs/techsupport.html #------------------------------------------------------------------------------ #--------- Preprocessor ------------------------------------------------------- # # Optionally edit if you wish: %define build_ncpus 8 # controls number of simultaneous compiles # Used to date the label %define version 20170901 # Used for the optimization tuning part of the label (not required) %if defined(%{noopt}) %define opt_label -noopt %elif defined(%{medopt}) %define opt_label -medopt %else %define opt_label %endif # Used for labeling static linked builds (not required) %if defined(%{static}) %define static_label -static %else %define static_label %endif #--------- Label -------------------------------------------------------------- # Arbitrary string, tags your binaries & directories. # Two Suggestions: # (1) Change this label as you try new ideas. label = ic18.0-lin-core-avx2-rate%{opt_label}%{static_label}-%{version} # (2) Make the label meaningful to YOU. #--------- Global Settings ---------------------------------------------------- # For info, see: # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname XXX # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#tune ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'label' to track binaries. # ######################################################## # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=0 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate command_add_redirect = 1 line_width = 1020 log_line_width = 1020 makeflags = -j%{build_ncpus} output_format = txt,cfg,pdf,csv preenv = 1 tune = base bench_post_setup = sync parallel_test = 1 mean_anyway = 1 reportable = 1 copies = 1 #Reference the flags Files flagsurl000=http://www.spec.org/cpu2017/flags/Intel-ic18.0-official-linux64.2017-10-19.xml %ifdef %{default-platform-flags} flagsurl001=http://www.spec.org/cpu2017/flags/Fujitsu-Platform-Settings-V1.2-SKL-RevE.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/lib/ia32:$[top]/lib/intel64:$[top]/je5.0.1-32:$[top]/je5.0.1-64 # Affinitization # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif #--------- Compilers ---------------------------------------------------------- intrate,fprate: CC = icc -m64 -std=c11 CXX = icpc -m64 FC = ifort -m64 default: # How to say "Show me your version, please" CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version JEMALLOC32_DIR = /usr/local/je5.0.1-32/lib JEMALLOC64_DIR = /usr/local/je5.0.1-64/lib %if !defined(%{static}) JEMALLOC32 = jemalloc JEMALLOC64 = jemalloc %else JEMALLOC32 = libjemalloc.a JEMALLOC64 = libjemalloc.a %endif #--------- Portability -------------------------------------------------------- intrate,fprate: PORTABILITY= -DSPEC_LP64 500.perlbench_r: CPORTABILITY = -DSPEC_LINUX_X64 521.wrf_r: CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY= -convert big_endian 523.xalancbmk_r: CXXPORTABILITY=-DSPEC_LINUX 526.blender_r: CPORTABILITY= -DSPEC_LINUX -funsigned-char 527.cam4_r: CPORTABILITY= -DSPEC_CASE_FLAG #--------- How Many CPUs? ----------------------------------------------------- # Both SPECrate and SPECspeed can test multiple chips / cores / hw threads # - For SPECrate, you set the number of copies. # See: https://www.spec.org/cpu2017/Docs/system-requirements.html#MultipleCPUs # # q. How many should I set? # a. Unknown, you will have to try it and see! # # To get you started, some suggestions: # # copies - This config file defaults to testing only 1 copy. You might # try changing it to match the number of cores on your system, # or perhaps the number of virtual CPUs as reported by: # grep -c processor /proc/cpuinfo # Be sure you have enough memory. See: # https://www.spec.org/cpu2017/Docs/system-requirements.html#memory # default: copies = 1 # EDIT to change number of copies (see above) #-------- Tuning Flags ------------------------------------------------- intspeed,fpspeed: #reconsider using a speed config file instead of a rate config file fail=1 intrate,fprate: SSE = -xCORE-AVX2 EXTRA_FOPTIMIZE = -nostandard-realloc-lhs -align array32byte intrate=default: EXTRA_LIBS = -L$(JEMALLOC64_DIR) -l$(JEMALLOC64) EXTRA_LDFLAGS = -Wl,-z,muldefs intrate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -ipo -O3 -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=3 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=3 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif fprate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -ipo -O3 -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif intrate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=3 PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=3 PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=3 PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=3 PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=3 PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=3 %else PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=3 PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=3 PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-mem-layout-trans=3 PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=3 PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=3 PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-mem-layout-trans=3 %endif fprate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 %else PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 %endif #some benchmarks do not want to share a core %ifdef %{smt-on} %define numpeakcopies %{cores} 510.parest_r,521.wrf_r,554.roms_r=peak: copies = %{numpeakcopies} %endif 500.perlbench_r=peak=default: #[56]00.perlbench[rs] has non standard signed overflow EXTRA_OPTIMIZE = -fno-strict-overflow 525.x264_r=peak: EXTRA_OPTIMIZE = -fno-alias 502.gcc_r,523.xalancbmk_r=peak: CC = icc -m32 -std=c11 -L/opt/intel/compilers_and_libraries_2018/linux/lib/ia32 CXX = icpc -m32 -L/opt/intel/compilers_and_libraries_2018/linux/lib/ia32 FC = ifort -m32 -L/opt/intel/compilers_and_libraries_2018/linux/lib/ia32 EXTRA_LIBS = -L$(JEMALLOC32_DIR) -l$(JEMALLOC32) EXTRA_LDFLAGS = -Wl,-z,muldefs #Change portability for 32b, large file support for safety PORTABILITY = -D_FILE_OFFSET_BITS=64 #int rate subset for removing FDO 505.mcf_r,525.x264_r,548.exchange2_r,557.xz_r=peak=default: feedback = 0 OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=3 %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=3 %endif #fp rate subset for removing FDO 503.bwaves_r,538.imagick_r,549.fotonik3d_r=peak=default: feedback = 0 OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 %else COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 %endif #------------------------------------------------------------------------------- # Tester and System Descriptions - EDIT the sections below #------------------------------------------------------------------------------- # For info about any field, see # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#hw_memory #------------------------------------------------------------------------------- #--------- If you install new compilers, EDIT this section -------------------- intrate,intspeed,fpspeed,fprate: sw_compiler000 = C/C++: Version 18.0.0.128 of Intel C/C++ sw_compiler001 = Compiler for Linux; sw_compiler002 = Fortran: Version 18.0.0.128 of Intel Fortran sw_compiler003 = Compiler for Linux sw_base_ptrsize = 64-bit fprate,fpspeed: sw_peak_ptrsize = Not Applicable sw_other = None intrate,intspeed: sw_peak_ptrsize = 32/64-bit sw_other001 = jemalloc: jemalloc memory allocator library V5.0.1; sw_other002 = jemalloc: configured and built at default for 32bit (i686) and 64bit (x86_64) targets; sw_other003 = jemalloc: built with the RedHat Enterprise 7.4, and the system compiler gcc 4.8.5; sw_other004 = jemalloc: sources available via jemalloc.net; #--------- EDIT Your info --------------------------------------------------------- # To understand the difference between hw_vendor/sponsor/tester, see: # www.spec.org/auto/cpu2017/Docs/config.html#test_sponsor intrate,intspeed,fprate,fpspeed: # Important: keep this line hw_vendor = Fujitsu tester = Fujitsu test_sponsor = Fujitsu license_num = 19 prepared_by = Fujitsu #--------- EDIT system availability dates and system information ---------------------------------------------- intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field hw_avail = Jul-2017 sw_avail = Mar-2018 # Nov-2099 # Date of LAST software component to ship hw_cpu_nominal_mhz = 2500 hw_cpu_max_mhz = 3800 hw_ncores = 112 hw_nthreadspercore = 2 hw_ncpuorder = 2,4 chips hw_model000 = PRIMERGY RX4770 M4, Intel Xeon Platinum 8180, hw_model001 = 2.50GHz hw_other = 1 x SAS HDD, 1.2 TB, 10500 RPM, used for swap # sw_other = # TurboHeap Library V8.1 # Other perf-relevant sw, or "None" hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per core hw_tcache = 38.5 MB I+D on chip per chip hw_ocache = None # hw_memory001 = # 4 TB (256 x 16 GB 2Rx4 PC4-2133P-R, # N GB (M x N GB nRxn # hw_memory002 = # running at 1600 MHz) # PCn-nnnnnR-n[, ECC and other info]) #--------- Sysinfo fields - You may need to adjust this section --------------- # Note: Some commented-out fields above are automatically set to preliminary # values by sysinfo # www.spec.org/auto/cpu2017/Docs/config.html#sysinfo # Uncomment lines for which you already have a better answer than sysinfo # intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field # hw_cpu_name = # Intel Xeon E9-9999 v9 # chip name # hw_disk = # 9 x 9 TB SATA III 9999 RPM # Size, type, other perf-relevant info # hw_nchips = # 99 # number chips enabled # sw_file = # ext99 # File system # sw_state = # Run level 99 # Software state. # sw_os001 = # Linux Sailboat # Operating system # sw_os002 = # Distribution 7.2 SP1 # and version #--------- EDIT Intel Recommended Fields - You may wish to adjust this section ----- default: notes_015 =LD_LIBRARY_PATH = "$LD_LIBRARY_PATH:/home/memory/speccpu/je5.0.1-64" notes_020 = notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_os_005 = Set Kernel Boot Parameter: nohz_full=1-223 notes_os_010 = Set CPU frequency governor to maximum performance with: notes_os_015 = cpupower -c all frequency-set -g performance notes_os_020 = Set tmpfs filesystem with: notes_os_025 = mkdir /home/memory notes_os_030 = mount -t tmpfs -o size=384g,rw tmpfs /home/memory notes_os_035 = cpu idle state set with: notes_os_040 = cpupower idle-set -d 1 notes_os_045 = cpupower idle-set -d 2 #Ease of tagging results from the runcpu command line with commands run outside of runcpu harneess #Adjust as necessary for your SUT %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_025 = Binaries compiled on a system with 1x Intel Core i7-4790 CPU + 32GB RAM %endif %ifdef %{drop_caches} notes_030 = memory using Redhat Enterprise Linux 7.4 notes_035 = Transparent Huge Pages enabled by default notes_040 = Prior to runcpu invocation %endif %ifdef %{invoke_with_interleave} notes_045 = Filesystem page cache synced and cleared with: notes_050 = sync; echo 3 > /proc/sys/vm/drop_caches notes_055 = runcpu command invoked through numactl i.e.: notes_060 = numactl --interleave=all runcpu notes_065 = notes_070 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_075 =is mitigated in the system as tested and documented. notes_080 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_085 =is mitigated in the system as tested and documented. notes_090 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_095 =is mitigated in the system as tested and documented. %endif intrate,fprate: %if defined(%{no-numa}) notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %else notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %endif # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:ecd2bef08f316af97f5a7768b641e2a3307c1b4b68efb5a57fa76367d790d233) default: notes_plat_sysinfo_000 = Sysinfo program /home/memory/speccpu/bin/sysinfo notes_plat_sysinfo_005 = Rev: r5797 of 2017-06-14 96c45e4568ad54c135fd618bcc091c0f notes_plat_sysinfo_010 = running on RX4770M4 Mon Jun 11 04:20:03 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_025 = For more information on this section, see notes_plat_sysinfo_030 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz notes_plat_sysinfo_050 = 4 "physical id"s (chips) notes_plat_sysinfo_055 = 224 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_065 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_070 = cpu cores : 28 notes_plat_sysinfo_075 = siblings : 56 notes_plat_sysinfo_080 = physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 25 26 27 notes_plat_sysinfo_085 = 28 29 30 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 25 26 27 notes_plat_sysinfo_095 = 28 29 30 notes_plat_sysinfo_100 = physical 2: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 25 26 27 notes_plat_sysinfo_105 = 28 29 30 notes_plat_sysinfo_110 = physical 3: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 16 17 18 19 20 21 22 24 25 26 27 notes_plat_sysinfo_115 = 28 29 30 notes_plat_sysinfo_120 = notes_plat_sysinfo_125 = From lscpu: notes_plat_sysinfo_130 = Architecture: x86_64 notes_plat_sysinfo_135 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_140 = Byte Order: Little Endian notes_plat_sysinfo_145 = CPU(s): 224 notes_plat_sysinfo_150 = On-line CPU(s) list: 0-223 notes_plat_sysinfo_155 = Thread(s) per core: 2 notes_plat_sysinfo_160 = Core(s) per socket: 28 notes_plat_sysinfo_165 = Socket(s): 4 notes_plat_sysinfo_170 = NUMA node(s): 8 notes_plat_sysinfo_175 = Vendor ID: GenuineIntel notes_plat_sysinfo_180 = CPU family: 6 notes_plat_sysinfo_185 = Model: 85 notes_plat_sysinfo_190 = Model name: Intel(R) Xeon(R) Platinum 8180 CPU @ 2.50GHz notes_plat_sysinfo_195 = Stepping: 4 notes_plat_sysinfo_200 = CPU MHz: 2501.000 notes_plat_sysinfo_205 = CPU max MHz: 2501.0000 notes_plat_sysinfo_210 = CPU min MHz: 1000.0000 notes_plat_sysinfo_215 = BogoMIPS: 4988.27 notes_plat_sysinfo_220 = Virtualization: VT-x notes_plat_sysinfo_225 = L1d cache: 32K notes_plat_sysinfo_230 = L1i cache: 32K notes_plat_sysinfo_235 = L2 cache: 1024K notes_plat_sysinfo_240 = L3 cache: 39424K notes_plat_sysinfo_245 = NUMA node0 CPU(s): 0-3,7-9,14-17,21-23,112-115,119-121,126-129,133-135 notes_plat_sysinfo_250 = NUMA node1 CPU(s): 4-6,10-13,18-20,24-27,116-118,122-125,130-132,136-139 notes_plat_sysinfo_255 = NUMA node2 CPU(s): 28-31,35-37,42-45,49-51,140-143,147-149,154-157,161-163 notes_plat_sysinfo_260 = NUMA node3 CPU(s): 32-34,38-41,46-48,52-55,144-146,150-153,158-160,164-167 notes_plat_sysinfo_265 = NUMA node4 CPU(s): 56-59,63-65,70-73,77-79,168-171,175-177,182-185,189-191 notes_plat_sysinfo_270 = NUMA node5 CPU(s): 60-62,66-69,74-76,80-83,172-174,178-181,186-188,192-195 notes_plat_sysinfo_275 = NUMA node6 CPU(s): 84-87,91-93,98-101,105-107,196-199,203-205,210-213,217-219 notes_plat_sysinfo_280 = NUMA node7 CPU(s): 88-90,94-97,102-104,108-111,200-202,206-209,214-216,220-223 notes_plat_sysinfo_285 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov notes_plat_sysinfo_290 = pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp notes_plat_sysinfo_295 = lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc notes_plat_sysinfo_300 = aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg notes_plat_sysinfo_305 = fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes notes_plat_sysinfo_310 = xsave avx f16c rdrand lahf_lm abm 3dnowprefetch ida arat epb invpcid_single pln pts notes_plat_sysinfo_315 = dtherm intel_pt rsb_ctxsw spec_ctrl retpoline kaiser tpr_shadow vnmi flexpriority notes_plat_sysinfo_320 = ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm mpx notes_plat_sysinfo_325 = avx512f avx512dq rdseed adx smap clflushopt clwb avx512cd avx512bw avx512vl xsaveopt notes_plat_sysinfo_330 = xsavec xgetbv1 cqm_llc cqm_occup_llc notes_plat_sysinfo_335 = notes_plat_sysinfo_340 = /proc/cpuinfo cache data notes_plat_sysinfo_345 = cache size : 39424 KB notes_plat_sysinfo_350 = notes_plat_sysinfo_355 = From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a notes_plat_sysinfo_360 = physical chip. notes_plat_sysinfo_365 = available: 8 nodes (0-7) notes_plat_sysinfo_370 = node 0 cpus: 0 1 2 3 7 8 9 14 15 16 17 21 22 23 112 113 114 115 119 120 121 126 127 128 notes_plat_sysinfo_375 = 129 133 134 135 notes_plat_sysinfo_380 = node 0 size: 95018 MB notes_plat_sysinfo_385 = node 0 free: 89597 MB notes_plat_sysinfo_390 = node 1 cpus: 4 5 6 10 11 12 13 18 19 20 24 25 26 27 116 117 118 122 123 124 125 130 131 notes_plat_sysinfo_395 = 132 136 137 138 139 notes_plat_sysinfo_400 = node 1 size: 96760 MB notes_plat_sysinfo_405 = node 1 free: 96485 MB notes_plat_sysinfo_410 = node 2 cpus: 28 29 30 31 35 36 37 42 43 44 45 49 50 51 140 141 142 143 147 148 149 154 notes_plat_sysinfo_415 = 155 156 157 161 162 163 notes_plat_sysinfo_420 = node 2 size: 96760 MB notes_plat_sysinfo_425 = node 2 free: 93497 MB notes_plat_sysinfo_430 = node 3 cpus: 32 33 34 38 39 40 41 46 47 48 52 53 54 55 144 145 146 150 151 152 153 158 notes_plat_sysinfo_435 = 159 160 164 165 166 167 notes_plat_sysinfo_440 = node 3 size: 96760 MB notes_plat_sysinfo_445 = node 3 free: 95767 MB notes_plat_sysinfo_450 = node 4 cpus: 56 57 58 59 63 64 65 70 71 72 73 77 78 79 168 169 170 171 175 176 177 182 notes_plat_sysinfo_455 = 183 184 185 189 190 191 notes_plat_sysinfo_460 = node 4 size: 96760 MB notes_plat_sysinfo_465 = node 4 free: 96502 MB notes_plat_sysinfo_470 = node 5 cpus: 60 61 62 66 67 68 69 74 75 76 80 81 82 83 172 173 174 178 179 180 181 186 notes_plat_sysinfo_475 = 187 188 192 193 194 195 notes_plat_sysinfo_480 = node 5 size: 96760 MB notes_plat_sysinfo_485 = node 5 free: 96511 MB notes_plat_sysinfo_490 = node 6 cpus: 84 85 86 87 91 92 93 98 99 100 101 105 106 107 196 197 198 199 203 204 205 notes_plat_sysinfo_495 = 210 211 212 213 217 218 219 notes_plat_sysinfo_500 = node 6 size: 96760 MB notes_plat_sysinfo_505 = node 6 free: 96318 MB notes_plat_sysinfo_510 = node 7 cpus: 88 89 90 94 95 96 97 102 103 104 108 109 110 111 200 201 202 206 207 208 notes_plat_sysinfo_515 = 209 214 215 216 220 221 222 223 notes_plat_sysinfo_520 = node 7 size: 96609 MB notes_plat_sysinfo_525 = node 7 free: 95851 MB notes_plat_sysinfo_530 = node distances: notes_plat_sysinfo_535 = node 0 1 2 3 4 5 6 7 notes_plat_sysinfo_540 = 0: 10 11 21 21 21 21 21 21 notes_plat_sysinfo_545 = 1: 11 10 21 21 21 21 21 21 notes_plat_sysinfo_550 = 2: 21 21 10 11 21 21 21 21 notes_plat_sysinfo_555 = 3: 21 21 11 10 21 21 21 21 notes_plat_sysinfo_560 = 4: 21 21 21 21 10 11 21 21 notes_plat_sysinfo_565 = 5: 21 21 21 21 11 10 21 21 notes_plat_sysinfo_570 = 6: 21 21 21 21 21 21 10 11 notes_plat_sysinfo_575 = 7: 21 21 21 21 21 21 11 10 notes_plat_sysinfo_580 = notes_plat_sysinfo_585 = From /proc/meminfo notes_plat_sysinfo_590 = MemTotal: 790723368 kB notes_plat_sysinfo_595 = HugePages_Total: 0 notes_plat_sysinfo_600 = Hugepagesize: 2048 kB notes_plat_sysinfo_605 = notes_plat_sysinfo_610 = /usr/bin/lsb_release -d notes_plat_sysinfo_615 = SUSE Linux Enterprise Server 12 SP2 notes_plat_sysinfo_620 = notes_plat_sysinfo_625 = From /etc/*release* /etc/*version* notes_plat_sysinfo_630 = SuSE-release: notes_plat_sysinfo_635 = SUSE Linux Enterprise Server 12 (x86_64) notes_plat_sysinfo_640 = VERSION = 12 notes_plat_sysinfo_645 = PATCHLEVEL = 2 notes_plat_sysinfo_650 = # This file is deprecated and will be removed in a future service pack or release. notes_plat_sysinfo_655 = # Please check /etc/os-release for details about this release. notes_plat_sysinfo_660 = os-release: notes_plat_sysinfo_665 = NAME="SLES" notes_plat_sysinfo_670 = VERSION="12-SP2" notes_plat_sysinfo_675 = VERSION_ID="12.2" notes_plat_sysinfo_680 = PRETTY_NAME="SUSE Linux Enterprise Server 12 SP2" notes_plat_sysinfo_685 = ID="sles" notes_plat_sysinfo_690 = ANSI_COLOR="0;32" notes_plat_sysinfo_695 = CPE_NAME="cpe:/o:suse:sles:12:sp2" notes_plat_sysinfo_700 = notes_plat_sysinfo_705 = uname -a: notes_plat_sysinfo_710 = Linux RX4770M4 4.4.114-92.64-default #1 SMP Thu Feb 1 19:18:19 UTC 2018 (c6ce5db) notes_plat_sysinfo_715 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_720 = notes_plat_sysinfo_725 = run-level 3 Jun 11 01:42 notes_plat_sysinfo_730 = notes_plat_sysinfo_735 = SPEC is set to: /home/memory/speccpu notes_plat_sysinfo_740 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_745 = tmpfs tmpfs 384G 8.9G 376G 3% /home/memory notes_plat_sysinfo_750 = notes_plat_sysinfo_755 = Additional information from dmidecode follows. WARNING: Use caution when you interpret notes_plat_sysinfo_760 = this section. The 'dmidecode' program reads system data which is "intended to allow notes_plat_sysinfo_765 = hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_770 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_775 = BIOS FUJITSU // American Megatrends Inc. V5.0.0.12 R1.9.0 for D3753-A1x notes_plat_sysinfo_780 = 03/29/2018 notes_plat_sysinfo_785 = Memory: notes_plat_sysinfo_790 = 48x Samsung M393A2G40EB2-CTD 16 GB 2 rank 2666 notes_plat_sysinfo_795 = notes_plat_sysinfo_800 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon Platinum 8180 hw_disk = 384 GB tmpfs hw_memory = 768 GB (48 x 16 GB 2Rx4 PC4-2666V-R) hw_nchips = 4 prepared_by = root (is never output, only tags rawfile) fw_bios = Fujitsu BIOS Version V5.0.0.12 R1.9.0 for D3753-A1x. Released Mar-2018 sw_file = tmpfs sw_os000 = SUSE Linux Enterprise Server 12 SP2 sw_os001 = 4.4.114-92.64-default sw_state = Run level 3 (multi-user) # End of settings added by sysinfo_program # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runcpu before the start of the run: notes_005 =LD_LIBRARY_PATH = "/home/memory/speccpu/lib/ia32:/home/memory/speccpu/lib/intel64" notes_010 =LD_LIBRARY_PATH = "$LD_LIBRARY_PATH:/home/memory/speccpu/je5.0.1-32" notes_plat_000 = BIOS configuration: notes_plat_005 = DCU Streamer Prefetcher = Disabled notes_plat_010 = Intel Virtualization Technology = Disabled notes_plat_015 = HWPM Support = Disabled notes_plat_020 = Package C State limit = C0 notes_plat_025 = LLC Dead Line Alloc = Disabled notes_plat_030 = Stale AtoS = Enabled notes_plat_035 = Patrol Scrub = Disabled notes_plat_040 = IMC Interleaving = 1-way notes_plat_045 = Sub NUMA Clustering = Enabled notes_plat_050 = Fan Control = Full