SPEC® CFP2006 Result

Copyright 2006-2016 Standard Performance Evaluation Corporation

Huawei

Huawei CH225 V3 (Intel Xeon E5-2697A v4)

SPECfp®2006 = 113

CPU2006 license: 3175 Test date: Nov-2016
Test sponsor: Huawei Hardware Availability: Mar-2016
Tested by: Huawei Software Availability: Nov-2015
Benchmark results graph
Hardware
CPU Name: Intel Xeon E5-2697A v4
CPU Characteristics: Intel Turbo Boost Technology up to 3.60 GHz
CPU MHz: 2600
FPU: Integrated
CPU(s) enabled: 32 cores, 2 chips, 16 cores/chip
CPU(s) orderable: 1,2 chip
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 256 KB I+D on chip per core
L3 Cache: 40 MB I+D on chip per chip
Other Cache: None
Memory: 512 GB (16 x 32 GB 2Rx4 PC4-2400T-R)
Disk Subsystem: 1 x 1000GB SATA, 7200 RPM
Other Hardware: None
Software
Operating System: Red Hat Enterprise Linux Server release 7.2
(Maipo)
3.10.0-327.el7.x86_64
Compiler: C/C++: Version 16.0.0.101 of Intel C++ Studio XE
for Linux;
Fortran: Version 16.0.0.101 of Intel Fortran
Studio XE for Linux
Auto Parallel: Yes
File System: xfs
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: 32/64-bit
Other Software: None

Results Table

Benchmark Base Peak
Seconds Ratio Seconds Ratio Seconds Ratio Seconds Ratio Seconds Ratio Seconds Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
410.bwaves 25.7 529   24.7 550   26.7 509   25.7 529   24.7 550   26.7 509  
416.gamess 548   35.8 546   35.9 546   35.8 474   41.3 474   41.3 474   41.3
433.milc 140   65.6 138   66.7 137   67.3 140   65.6 138   66.7 137   67.3
434.zeusmp 44.4 205   44.7 203   44.4 205   44.4 205   44.7 203   44.4 205  
435.gromacs 150   47.6 149   48.0 150   47.6 150   47.6 149   48.0 150   47.6
436.cactusADM 16.6 719   16.5 723   16.7 716   16.6 719   16.5 723   16.7 716  
437.leslie3d 24.4 385   24.1 390   24.3 387   24.4 385   24.1 390   24.3 387  
444.namd 253   31.7 253   31.7 254   31.6 246   32.6 246   32.6 246   32.6
447.dealII 182   62.8 181   63.1 183   62.5 182   62.8 181   63.1 183   62.5
450.soplex 183   45.5 186   44.9 185   45.2 183   45.5 186   44.9 185   45.2
453.povray 97.0 54.8 98.6 54.0 96.4 55.2 86.0 61.9 85.6 62.2 86.2 61.7
454.calculix 155   53.3 155   53.1 155   53.1 145   56.7 146   56.6 146   56.7
459.GemsFDTD 47.8 222   47.5 223   46.3 229   39.0 272   40.7 261   40.2 264  
465.tonto 230   42.8 229   42.9 229   43.0 190   51.9 189   52.0 190   51.8
470.lbm 20.2 681   20.8 661   19.7 697   20.2 681   20.8 661   19.7 697  
481.wrf 135   82.7 135   83.0 134   83.4 135   82.7 135   83.0 134   83.4
482.sphinx3 257   75.9 261   74.8 256   76.1 257   75.9 261   74.8 256   76.1

Operating System Notes

 Stack size set to unlimited using "ulimit -s unlimited"

Platform Notes

 BIOS configuration:
 Set Power Efficiency Mode to Custom
 Set Snoop Mode to HS mode
 Set Patrol Scrub to Disable
 Set Hyper-Threading to Disable
 Sysinfo program /spec16/config/sysinfo.rev6914
 $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1
 running on localhost.localdomain Wed Nov  2 22:12:08 2016

 This section contains SUT (System Under Test) info as seen by
 some common utilities.  To remove or add to this section, see:
   http://www.spec.org/cpu2006/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : Intel(R) Xeon(R) CPU E5-2697A v4 @ 2.60GHz
       2 "physical id"s (chips)
       32 "processors"
    cores, siblings (Caution: counting these is hw and system dependent.  The
    following excerpts from /proc/cpuinfo might not be reliable.  Use with
    caution.)
       cpu cores : 16
       siblings  : 16
       physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
       physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
    cache size : 40960 KB

 From /proc/meminfo
    MemTotal:       527792616 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 From /etc/*release* /etc/*version*
    os-release:
       NAME="Red Hat Enterprise Linux Server"
       VERSION="7.2 (Maipo)"
       ID="rhel"
       ID_LIKE="fedora"
       VERSION_ID="7.2"
       PRETTY_NAME="Red Hat Enterprise Linux Server 7.2 (Maipo)"
       ANSI_COLOR="0;31"
       CPE_NAME="cpe:/o:redhat:enterprise_linux:7.2:GA:server"
    redhat-release: Red Hat Enterprise Linux Server release 7.2 (Maipo)
    system-release: Red Hat Enterprise Linux Server release 7.2 (Maipo)
    system-release-cpe: cpe:/o:redhat:enterprise_linux:7.2:ga:server

 uname -a:
    Linux localhost.localdomain 3.10.0-327.el7.x86_64 #1 SMP Thu Oct 29 17:29:29
    EDT 2015 x86_64 x86_64 x86_64 GNU/Linux

 run-level 3 Nov 2 17:33

 SPEC is set to: /spec16
    Filesystem     Type  Size  Used Avail Use% Mounted on
    /dev/sda2      xfs   879G   11G  868G   2% /
 Additional information from dmidecode:

    Warning: Use caution when you interpret this section. The 'dmidecode' program
    reads system data which is "intended to allow hardware to be accurately
    determined", but the intent may not be met, as there are frequent changes to
    hardware, firmware, and the "DMTF SMBIOS" standard.

   BIOS Insyde Corp. 3.32 09/14/2016
   Memory:
    8x NO DIMM NO DIMM
    16x Samsung M393A4K40BB1-CRC 32 GB 2 rank 2400 MHz

 (End of data from sysinfo program)

General Notes

Environment variables set by runspec before the start of the run:
KMP_AFFINITY = "granularity=fine,compact,1,0"
LD_LIBRARY_PATH = "/spec16/libs/32:/spec16/libs/64:/spec16/sh"
OMP_NUM_THREADS = "32"

 Binaries compiled on a system with 1x Intel Core i5-4670K CPU + 32GB
 memory using RedHat EL 7.1
 Transparent Huge Pages enabled with:
 echo always > /sys/kernel/mm/transparent_hugepage/enabled
 runspec command invoked through numactl i.e.:
 numactl --interleave=all runspec <etc>
 The Huawei CH225 V3 and Huawei CH226 V3 are electronically equivalent.
 The results have been measured on a Huawei CH225 V3 model.

Base Compiler Invocation

C benchmarks:

 icc -m64 

C++ benchmarks:

 icpc -m64 

Fortran benchmarks:

 ifort -m64 

Benchmarks using both Fortran and C:

 icc -m64   ifort -m64 

Base Portability Flags

410.bwaves:  -DSPEC_CPU_LP64 
416.gamess:  -DSPEC_CPU_LP64 
433.milc:  -DSPEC_CPU_LP64 
434.zeusmp:  -DSPEC_CPU_LP64 
435.gromacs:  -DSPEC_CPU_LP64   -nofor_main 
436.cactusADM:  -DSPEC_CPU_LP64   -nofor_main 
437.leslie3d:  -DSPEC_CPU_LP64 
444.namd:  -DSPEC_CPU_LP64 
447.dealII:  -DSPEC_CPU_LP64 
450.soplex:  -DSPEC_CPU_LP64 
453.povray:  -DSPEC_CPU_LP64 
454.calculix:  -DSPEC_CPU_LP64   -nofor_main 
459.GemsFDTD:  -DSPEC_CPU_LP64 
465.tonto:  -DSPEC_CPU_LP64 
470.lbm:  -DSPEC_CPU_LP64 
481.wrf:  -DSPEC_CPU_LP64   -DSPEC_CPU_CASE_FLAG   -DSPEC_CPU_LINUX 
482.sphinx3:  -DSPEC_CPU_LP64 

Base Optimization Flags

C benchmarks:

 -xCORE-AVX2   -ipo   -O3   -no-prec-div   -parallel   -opt-prefetch   -ansi-alias 

C++ benchmarks:

 -xCORE-AVX2   -ipo   -O3   -no-prec-div   -opt-prefetch   -ansi-alias 

Fortran benchmarks:

 -xCORE-AVX2   -ipo   -O3   -no-prec-div   -parallel   -opt-prefetch 

Benchmarks using both Fortran and C:

 -xCORE-AVX2   -ipo   -O3   -no-prec-div   -parallel   -opt-prefetch   -ansi-alias 

Peak Compiler Invocation

C benchmarks:

 icc -m64 

C++ benchmarks:

 icpc -m64 

Fortran benchmarks:

 ifort -m64 

Benchmarks using both Fortran and C:

 icc -m64   ifort -m64 

Peak Portability Flags

Same as Base Portability Flags

Peak Optimization Flags

C benchmarks:

433.milc:  basepeak = yes 
470.lbm:  basepeak = yes 
482.sphinx3:  basepeak = yes 

C++ benchmarks:

444.namd:  -xCORE-AVX2(pass 2)   -prof-gen:threadsafe(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -par-num-threads=1(pass 1)   -prof-use(pass 2)   -fno-alias   -auto-ilp32 
447.dealII:  basepeak = yes 
450.soplex:  basepeak = yes 
453.povray:  -xCORE-AVX2(pass 2)   -prof-gen:threadsafe(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -par-num-threads=1(pass 1)   -prof-use(pass 2)   -unroll4   -ansi-alias 

Fortran benchmarks:

410.bwaves:  basepeak = yes 
416.gamess:  -xCORE-AVX2(pass 2)   -prof-gen:threadsafe(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -par-num-threads=1(pass 1)   -prof-use(pass 2)   -unroll2   -inline-level=0   -scalar-rep- 
434.zeusmp:  basepeak = yes 
437.leslie3d:  basepeak = yes 
459.GemsFDTD:  -xCORE-AVX2(pass 2)   -prof-gen:threadsafe(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -par-num-threads=1(pass 1)   -prof-use(pass 2)   -unroll2   -inline-level=0   -opt-prefetch   -parallel 
465.tonto:  -xCORE-AVX2(pass 2)   -prof-gen:threadsafe(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -par-num-threads=1(pass 1)   -prof-use(pass 2)   -inline-calloc   -opt-malloc-options=3   -auto   -unroll4 

Benchmarks using both Fortran and C:

435.gromacs:  basepeak = yes 
436.cactusADM:  basepeak = yes 
454.calculix:  -xCORE-AVX2   -ipo   -O3   -no-prec-div   -auto-ilp32   -ansi-alias 
481.wrf:  basepeak = yes 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2006/flags/Intel-ic16.0-official-linux64.html,
http://www.spec.org/cpu2006/flags/Huawei-Platform-Settings-BDW-V1.0.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2006/flags/Intel-ic16.0-official-linux64.xml,
http://www.spec.org/cpu2006/flags/Huawei-Platform-Settings-BDW-V1.0.xml.