SPEC® CFP2006 Result

Copyright 2006-2015 Standard Performance Evaluation Corporation

Huawei

Huawei XH628 V3 (Intel Xeon E5-2698 v3)

SPECfp®2006 = 108

CPU2006 license: 3175 Test date: Mar-2015
Test sponsor: Huawei Hardware Availability: Sep-2014
Tested by: Huawei Software Availability: Sep-2014
Benchmark results graph
Hardware
CPU Name: Intel Xeon E5-2698 v3
CPU Characteristics: Intel Turbo Boost Technology up to 3.60 GHz
CPU MHz: 2300
FPU: Integrated
CPU(s) enabled: 32 cores, 2 chips, 16 cores/chip
CPU(s) orderable: 1,2 chip
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 256 KB I+D on chip per core
L3 Cache: 40 MB I+D on chip per chip
Other Cache: None
Memory: 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R)
Disk Subsystem: 1 x 500 GB SATA, 7200 RPM
Other Hardware: None
Software
Operating System: Red Hat Enterprise Linux Server release 7.0
(Maipo)
3.10.0-123.el7.x86_64
Compiler: C/C++: Version 15.0.0.090 of Intel C++ Studio XE
for Linux;
Fortran: Version 15.0.0.090 of Intel Fortran
Studio XE for Linux
Auto Parallel: Yes
File System: ext4
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: 32/64-bit
Other Software: None

Results Table

Benchmark Base Peak
Seconds Ratio Seconds Ratio Seconds Ratio Seconds Ratio Seconds Ratio Seconds Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
410.bwaves 26.3 516   25.2 540   24.6 553   26.3 516   25.2 540   24.6 553  
416.gamess 549   35.7 547   35.8 545   35.9 459   42.6 458   42.7 459   42.7
433.milc 140   65.6 139   66.0 139   66.2 136   67.4 137   66.8 137   66.9
434.zeusmp 45.7 199   46.1 198   46.0 198   45.7 199   46.1 198   46.0 198  
435.gromacs 195   36.6 192   37.1 196   36.5 195   36.6 192   37.1 196   36.5
436.cactusADM 17.2 695   17.4 686   17.4 686   17.2 695   17.4 686   17.4 686  
437.leslie3d 25.8 365   26.0 362   25.8 364   25.8 365   26.0 362   25.8 364  
444.namd 264   30.4 264   30.4 264   30.4 257   31.2 257   31.2 257   31.2
447.dealII 207   55.3 209   54.7 206   55.6 207   55.3 209   54.7 206   55.6
450.soplex 188   44.5 185   45.1 188   44.4 188   44.5 185   45.1 188   44.4
453.povray 95.4 55.8 95.8 55.5 96.0 55.4 85.1 62.5 85.9 61.9 85.3 62.4
454.calculix 165   50.1 165   50.1 164   50.2 145   56.9 145   56.9 145   56.8
459.GemsFDTD 50.9 208   49.7 213   51.6 206   42.6 249   41.7 255   42.4 250  
465.tonto 285   34.5 280   35.1 280   35.1 194   50.9 193   51.0 193   51.0
470.lbm 20.0 686   19.8 695   20.9 657   20.0 686   19.8 695   20.9 657  
481.wrf 130   86.0 130   85.7 130   86.1 130   86.0 130   85.7 130   86.1
482.sphinx3 298   65.3 297   65.7 296   65.7 298   65.3 297   65.7 296   65.7

Operating System Notes

 Stack size set to unlimited using "ulimit -s unlimited"

Platform Notes

 BIOS configuration:
 Set Power Efficiency Mode to Performance
 Set Snoop Mode to HS mode
 Set Intel Hyper-threading Technology to Disable
 Sysinfo program /spec15/config/sysinfo.rev6914
 $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1
 running on localhost.localdomain Wed Mar 25 07:49:33 2015

 This section contains SUT (System Under Test) info as seen by
 some common utilities.  To remove or add to this section, see:
   http://www.spec.org/cpu2006/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : Intel(R) Xeon(R) CPU E5-2698 v3 @ 2.30GHz
       2 "physical id"s (chips)
       32 "processors"
    cores, siblings (Caution: counting these is hw and system dependent.  The
    following excerpts from /proc/cpuinfo might not be reliable.  Use with
    caution.)
       cpu cores : 16
       siblings  : 16
       physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
       physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
    cache size : 40960 KB

 From /proc/meminfo
    MemTotal:       263719632 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 From /etc/*release* /etc/*version*
    os-release:
       NAME="Red Hat Enterprise Linux Server"
       VERSION="7.0 (Maipo)"
       ID="rhel"
       ID_LIKE="fedora"
       VERSION_ID="7.0"
       PRETTY_NAME="Red Hat Enterprise Linux Server 7.0 (Maipo)"
       ANSI_COLOR="0;31"
       CPE_NAME="cpe:/o:redhat:enterprise_linux:7.0:GA:server"
    redhat-release: Red Hat Enterprise Linux Server release 7.0 (Maipo)
    system-release: Red Hat Enterprise Linux Server release 7.0 (Maipo)
    system-release-cpe: cpe:/o:redhat:enterprise_linux:7.0:ga:server

 uname -a:
    Linux localhost.localdomain 3.10.0-123.el7.x86_64 #1 SMP Mon May 5 11:16:57
    EDT 2014 x86_64 x86_64 x86_64 GNU/Linux

 run-level 3 Mar 24 06:41

 SPEC is set to: /spec15
    Filesystem     Type  Size  Used Avail Use% Mounted on
    /dev/sda1      ext4  458G   39G  397G   9% /
 Additional information from dmidecode:

    Warning: Use caution when you interpret this section. The 'dmidecode' program
    reads system data which is "intended to allow hardware to be accurately
    determined", but the intent may not be met, as there are frequent changes to
    hardware, firmware, and the "DMTF SMBIOS" standard.

   BIOS Insyde Corp. 1.17 09/03/2014
   Memory:
    8x Micron 36ASF2G72PZ-2G1A2 16 GB 1 rank 2133 MHz
    8x Micron 36ASF2G72PZ-2G1A2 16 GB 2 rank 2133 MHz

 (End of data from sysinfo program)

General Notes

Environment variables set by runspec before the start of the run:
KMP_AFFINITY = "granularity=fine,compact,1,0"
LD_LIBRARY_PATH = "/spec15/libs/32:/spec15/libs/64:/spec15/sh"
OMP_NUM_THREADS = "32"

 Binaries compiled on a system with 1x Core i5-4670K CPU + 16GB
 memory using RedHat EL 7.0
 Transparent Huge Pages enabled with:
 echo always > /sys/kernel/mm/transparent_hugepage/enabled
 runspec command invoked through numactl i.e.:
 numactl --interleave=all runspec <etc>
 The Huawei XH622 V3 and Huawei XH628 V3
 are electronically equivalent.
 The results have been measured on a Huawei XH628 V3 model.

Base Compiler Invocation

C benchmarks:

 icc -m64 

C++ benchmarks:

 icpc -m64 

Fortran benchmarks:

 ifort -m64 

Benchmarks using both Fortran and C:

 icc -m64   ifort -m64 

Base Portability Flags

410.bwaves:  -DSPEC_CPU_LP64 
416.gamess:  -DSPEC_CPU_LP64 
433.milc:  -DSPEC_CPU_LP64 
434.zeusmp:  -DSPEC_CPU_LP64 
435.gromacs:  -DSPEC_CPU_LP64   -nofor_main 
436.cactusADM:  -DSPEC_CPU_LP64   -nofor_main 
437.leslie3d:  -DSPEC_CPU_LP64 
444.namd:  -DSPEC_CPU_LP64 
447.dealII:  -DSPEC_CPU_LP64 
450.soplex:  -DSPEC_CPU_LP64 
453.povray:  -DSPEC_CPU_LP64 
454.calculix:  -DSPEC_CPU_LP64   -nofor_main 
459.GemsFDTD:  -DSPEC_CPU_LP64 
465.tonto:  -DSPEC_CPU_LP64 
470.lbm:  -DSPEC_CPU_LP64 
481.wrf:  -DSPEC_CPU_LP64   -DSPEC_CPU_CASE_FLAG   -DSPEC_CPU_LINUX 
482.sphinx3:  -DSPEC_CPU_LP64 

Base Optimization Flags

C benchmarks:

 -xCORE-AVX2   -ipo   -O3   -no-prec-div   -parallel   -opt-prefetch   -ansi-alias 

C++ benchmarks:

 -xCORE-AVX2   -ipo   -O3   -no-prec-div   -opt-prefetch   -ansi-alias 

Fortran benchmarks:

 -xCORE-AVX2   -ipo   -O3   -no-prec-div   -parallel   -opt-prefetch 

Benchmarks using both Fortran and C:

 -xCORE-AVX2   -ipo   -O3   -no-prec-div   -parallel   -opt-prefetch   -ansi-alias 

Peak Compiler Invocation

C benchmarks:

 icc -m64 

C++ benchmarks:

 icpc -m64 

Fortran benchmarks:

 ifort -m64 

Benchmarks using both Fortran and C:

 icc -m64   ifort -m64 

Peak Portability Flags

Same as Base Portability Flags

Peak Optimization Flags

C benchmarks:

433.milc:  -xCORE-AVX2(pass 2)   -prof-gen(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -prof-use(pass 2)   -auto-ilp32   -ansi-alias 
470.lbm:  basepeak = yes 
482.sphinx3:  basepeak = yes 

C++ benchmarks:

444.namd:  -xCORE-AVX2(pass 2)   -prof-gen(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -prof-use(pass 2)   -fno-alias   -auto-ilp32 
447.dealII:  basepeak = yes 
450.soplex:  basepeak = yes 
453.povray:  -xCORE-AVX2(pass 2)   -prof-gen(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -prof-use(pass 2)   -unroll4   -ansi-alias 

Fortran benchmarks:

410.bwaves:  basepeak = yes 
416.gamess:  -xCORE-AVX2(pass 2)   -prof-gen(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -prof-use(pass 2)   -unroll2   -inline-level=0   -scalar-rep- 
434.zeusmp:  basepeak = yes 
437.leslie3d:  basepeak = yes 
459.GemsFDTD:  -xCORE-AVX2(pass 2)   -prof-gen(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -prof-use(pass 2)   -unroll2   -inline-level=0   -opt-prefetch   -parallel 
465.tonto:  -xCORE-AVX2(pass 2)   -prof-gen(pass 1)   -ipo(pass 2)   -O3(pass 2)   -no-prec-div(pass 2)   -prof-use(pass 2)   -inline-calloc   -opt-malloc-options=3   -auto   -unroll4 

Benchmarks using both Fortran and C:

435.gromacs:  basepeak = yes 
436.cactusADM:  basepeak = yes 
454.calculix:  -xCORE-AVX2   -ipo   -O3   -no-prec-div   -auto-ilp32   -ansi-alias 
481.wrf:  basepeak = yes 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2006/flags/Intel-ic15.0-official-linux64.html,
http://www.spec.org/cpu2006/flags/Huawei-Platform-Settings-HASWELL-V1.4.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2006/flags/Intel-ic15.0-official-linux64.xml,
http://www.spec.org/cpu2006/flags/Huawei-Platform-Settings-HASWELL-V1.4.xml.