# Invocation command line: # /cpu2006/bin/runspec --rate 24 -c cpu2006.1.1.ic12.linux64.sse42.rate.03jan2011.cfg --define smt --define cores=12 --define physicalfirst --flagsurl=Intel-ic12.0-linux64-revA.xml --parallel_test=1 -T all -o all fp # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 12.0 # Operating system version: 64-Bit RedHat Enterprise Linux64 5.5 # Hardware: Intel processors supporting SSE4.2 # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # Oct 2010 IC 12.0 Linux64 ############################################################################ action = validate tune = base,peak ext = cpu2006.1.1.ic12.linux64.sse42.rate.03jan2011 PATHSEP = / check_md5=1 reportable=1 bench_post_setup=sync parallel_test=0 mean_anyway=1 verbose=6 # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m32 CXX= icpc -m32 OBJ = .o SMARTHEAP32_DIR = /smartheap SMARTHEAP64_DIR = /smartheap LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o 437.leslie3d,453.povray,454.calculix,459.GemsFDTD,465.tonto=peak=default: LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores #default: #submit = numactl --localalloc --physcpubind=$SPECCOPYNUM $command #%ifdef %{no-numa} #submit = taskset -c $SPECCOPYNUM $command #%endif #include: intel-sut.inc # ----- Begin inclusion of 'intel-sut.inc' ############################################################################ submit = MYMASK=`printf '0x%x' \$((1<<\$SPECCOPYNUM))`; taskset \$MYMASK $command submit0 = echo "$command" > run.sh submit1 = if `test $SPECCOPYNUM -eq 0 `; then numactl -m 0 --physcpubind=0 sh run.sh; fi submit2 = if `test $SPECCOPYNUM -eq 1 `; then numactl -m 0 --physcpubind=1 sh run.sh; fi submit3 = if `test $SPECCOPYNUM -eq 2 `; then numactl -m 0 --physcpubind=2 sh run.sh; fi submit4 = if `test $SPECCOPYNUM -eq 3 `; then numactl -m 0 --physcpubind=3 sh run.sh; fi submit5 = if `test $SPECCOPYNUM -eq 4 `; then numactl -m 0 --physcpubind=4 sh run.sh; fi submit6 = if `test $SPECCOPYNUM -eq 5 `; then numactl -m 0 --physcpubind=5 sh run.sh; fi submit7 = if `test $SPECCOPYNUM -eq 6 `; then numactl -m 1 --physcpubind=6 sh run.sh; fi submit8 = if `test $SPECCOPYNUM -eq 7 `; then numactl -m 1 --physcpubind=7 sh run.sh; fi submit9 = if `test $SPECCOPYNUM -eq 8 `; then numactl -m 1 --physcpubind=8 sh run.sh; fi submit10 = if `test $SPECCOPYNUM -eq 9 `; then numactl -m 1 --physcpubind=9 sh run.sh; fi submit11 = if `test $SPECCOPYNUM -eq 10 `; then numactl -m 1 --physcpubind=10 sh run.sh; fi submit12 = if `test $SPECCOPYNUM -eq 11 `; then numactl -m 1 --physcpubind=11 sh run.sh; fi submit13 = if `test $SPECCOPYNUM -eq 12 `; then numactl -m 0 --physcpubind=12 sh run.sh; fi submit14 = if `test $SPECCOPYNUM -eq 13 `; then numactl -m 0 --physcpubind=13 sh run.sh; fi submit15 = if `test $SPECCOPYNUM -eq 14 `; then numactl -m 0 --physcpubind=14 sh run.sh; fi submit16 = if `test $SPECCOPYNUM -eq 15 `; then numactl -m 0 --physcpubind=15 sh run.sh; fi submit17 = if `test $SPECCOPYNUM -eq 16 `; then numactl -m 0 --physcpubind=16 sh run.sh; fi submit18 = if `test $SPECCOPYNUM -eq 17 `; then numactl -m 0 --physcpubind=17 sh run.sh; fi submit19 = if `test $SPECCOPYNUM -eq 18 `; then numactl -m 1 --physcpubind=18 sh run.sh; fi submit20 = if `test $SPECCOPYNUM -eq 19 `; then numactl -m 1 --physcpubind=19 sh run.sh; fi submit21 = if `test $SPECCOPYNUM -eq 20 `; then numactl -m 1 --physcpubind=20 sh run.sh; fi submit22 = if `test $SPECCOPYNUM -eq 21 `; then numactl -m 1 --physcpubind=21 sh run.sh; fi submit23 = if `test $SPECCOPYNUM -eq 22 `; then numactl -m 1 --physcpubind=22 sh run.sh; fi submit24 = if `test $SPECCOPYNUM -eq 23 `; then numactl -m 1 --physcpubind=23 sh run.sh; fi # ---- End inclusion of '/cpu2006/config/intel-sut.inc' #################################################################### # Compiler options # for Nehalem use -xSSE4.2 # for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3 #################################################################### default: SSE = -xSSE4.2 FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div -static ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX fp=default: PORTABILITY = -DSPEC_CPU_LP64 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ################################################################ # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FASTNOSTATIC) -opt-prefetch CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch fp=base=default=default: OPTIMIZE= $(FAST) COPTIMIZE= $(FAST) -ansi-alias CXXOPTIMIZE= $(FAST) -ansi-alias ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -ansi-alias -auto-ilp32 CXXOPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = -prof-gen PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 COPTIMIZE= PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT 401.bzip2=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -opt-prefetch -auto-ilp32 -ansi-alias PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT 403.gcc=peak=default: COPTIMIZE = $(FASTNOSTATIC) feedback=0 429.mcf=peak=default: #################################################################################################################################### %ifdef %{smt} copies=%{cores} #%ifdef %{physicallogical} #submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif #%endif #################################################################################################################################### 445.gobmk=peak=default: PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= $(FASTNOSTATIC) -unroll2 -auto-ilp32 feedback=no LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT #################################################################################################################################### %ifdef %{smt} copies=%{cores} #%ifdef %{physicallogical} #submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif #%endif #################################################################################################################################### 458.sjeng=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll4 -auto-ilp32 PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT 462.libquantum=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX basepeak=yes feedback=no LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT 464.h264ref=peak=default: COPTIMIZE= -unroll2 -ansi-alias 471.omnetpp=peak=default: CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=block 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: basepeak=yes ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 CXXOPTIMIZE= -auto-ilp32 PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = $(FASTNOSTATIC) -prof-use 410.bwaves=peak=default: OPTIMIZE= -static #################################################################################################################################### %ifdef %{smt} copies=%{cores} #%ifdef %{physicallogical} #submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif #%endif #################################################################################################################################### 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- -static #################################################################################################################################### %ifdef %{smt} copies=%{cores} #%ifdef %{physicallogical} #submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif #%endif #################################################################################################################################### 433.milc=peak=default: OPTIMIZE= -static 434.zeusmp=peak=default: basepeak=yes feedback=0 435.gromacs=peak=default: OPTIMIZE= -opt-prefetch -static 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: OPTIMIZE= $(FASTNOSTATIC) feedback=no #################################################################################################################################### %ifdef %{smt} copies=%{cores} #%ifdef %{physicallogical} #submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif #%endif #################################################################################################################################### 444.namd=peak=default: CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: OPTIMIZE= -static 450.soplex=peak=default: PORTABILITY = CXX= icpc -m32 OPTIMIZE= -opt-malloc-options=3 CXXOPTIMIZE= PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT #################################################################################################################################### %ifdef %{smt} copies=%{cores} #%ifdef %{physicallogical} #submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif #%endif #################################################################################################################################### 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: basepeak=yes 459.GemsFDTD=peak=default: basepeak=yes #################################################################################################################################### %ifdef %{smt} copies=%{cores} #%ifdef %{physicallogical} #submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif #%endif #################################################################################################################################### 465.tonto=peak=default: OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3 470.lbm=peak=default: OPTIMIZE= -opt-malloc-options=3 -ansi-alias -opt-prefetch -static #################################################################################################################################### %ifdef %{smt} copies=%{cores} #%ifdef %{physicallogical} #submit = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command %ifdef %{no-numa} submit = taskset -c `expr 2 \\* $SPECCOPYNUM` $command %endif %endif #%endif #################################################################################################################################### 481.wrf=peak=default: basepeak=yes feedback=0 482.sphinx3=peak=default: PORTABILITY= CC= icc -m32 OPTIMIZE= $(FASTNOSTATIC) COPTIMIZE= -unroll2 feedback=no ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 3 test_sponsor = Hewlett-Packard Company hw_avail = Feb-2011 sw_avail = Dec-2010 tester = Hewlett-Packard Company hw_cpu_name = Intel Xeon X5690 hw_cpu_char = Intel Turbo Boost Technology up to 3.73 GHz hw_cpu_mhz = 3467 hw_disk = 1 x 500 GB 7.2 K SATA hw_fpu = Integrated hw_memory = 96 GB (12 x 8 GB 2Rx4 PC3-10600R-9, ECC) hw_model000 = ProLiant DL160 G6 hw_model001 = (3.46 GHz, Intel Xeon X5690) hw_ncpuorder = 1,2 chips hw_ncores = 12 hw_nchips = 2 hw_ncoresperchip = 6 hw_nthreadspercore = 2 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 12 MB I+D on chip per chip hw_ocache = None hw_vendor = Hewlett-Packard Company prepared_by = Hewlett-Packard Company sw_file = ext3 sw_os000 = SUSE Linux Enterprise Server 11 (x86_64) SP1, sw_os001 = Kernel 2.6.32.12-0.7-default sw_state = Run level 3 (multi-user) notes_submit_000 = numactl was used to bind copies to the cores notes_submit_005 =The config file option 'submit' was used. %ifdef %{no-numa} notes_submit_000 = taskset was used to bind copies to the cores %endif notes_plat_000 = BIOS configuration: notes_plat_005 = Power Efficiency Mode set to Performance notes_plat_010 = Data Reuse set to Disabled int=default=default=default: sw_compiler001 = Intel(R) C++ Compiler XE for applications running on IA-32 sw_compiler002 = Version 12.0.1.116 Build 20101116 sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit sw_other001 = Microquill SmartHeap V9.01 sw_other002 = Binaries compiled on RHEL5.5 with binutils-2.17.50.0.6-14.el5 fp=default=default=default: sw_compiler000 = Intel C++ and Fortran Intel 64 Compiler XE sw_compiler001 = for applications running on Intel 64 sw_compiler002 = Version 12.0.1.116 Build 20101116 sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit sw_other = None # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 470.lbm: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 465.tonto: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 447.dealII: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 435.gromacs: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 416.gamess: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: flagsurl000 = http://www.spec.org/cpu2006/flags/Intel-ic12.0-linux64-revA.xml flagsurl001 = http://www.spec.org/cpu2006/flags/HP-Intel-Linux-Settings-flags.20110216.00.xml notes_os_000 = 'nodev /mnt/hugepages hugetlbfs defaults 0 0' added to /etc/fstab notes_os_005 = 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run notes_os_010 = echo 10800 > /proc/sys/vm/nr_hugepages notes_os_015 = export HUGETLB_MORECORE=yes notes_os_020 = export LD_PRELOAD=/usr/lib64/libhugetlbfs.so notes_000 = Binaries were compiled on RHEL5.5 with Binutils binutils-2.17.50.0.6-14.el5