# Invocation command line: # /home/bsc/cpu2006/bin/runspec --config=BladeSymphony_int_rate -T all --reportable --rate --copies=16 --define dp-nhm int # output_root was not used for this run ############################################################################ ############################################################################ # SPEC CPU2006 Intel Linux64 EM64T config file # HITACHI BladeSymphony # Intel Compiler 11.1 for Linux64 EM64T action = validate tune = base ext = cpu2006.linux64.em64t.ic111.exe PATHSEP = / check_md5 = 1 reportable = 1 mean_anyway = 1 bench_post_setup=sync ##### Compiler section default=default=default=default: CC = icc -m32 CXX = icpc -m32 OBJ = .o SMARTHEAP_DIR = /home/bsc/smartheap/lib bind0 = numactl -m 0 --physcpubind=0 bind1 = numactl -m 0 --physcpubind=1 bind2 = numactl -m 0 --physcpubind=2 bind3 = numactl -m 0 --physcpubind=3 bind4 = numactl -m 1 --physcpubind=4 bind5 = numactl -m 1 --physcpubind=5 bind6 = numactl -m 1 --physcpubind=6 bind7 = numactl -m 1 --physcpubind=7 bind8 = numactl -m 0 --physcpubind=8 bind9 = numactl -m 0 --physcpubind=9 bind10 = numactl -m 0 --physcpubind=10 bind11 = numactl -m 0 --physcpubind=11 bind12 = numactl -m 1 --physcpubind=12 bind13 = numactl -m 1 --physcpubind=13 bind14 = numactl -m 1 --physcpubind=14 bind15 = numactl -m 1 --physcpubind=15 #bind16 = numactl -m 0 --physcpubind=16 #bind17 = numactl -m 0 --physcpubind=17 #bind18 = numactl -m 1 --physcpubind=18 #bind19 = numactl -m 1 --physcpubind=19 #bind20 = numactl -m 1 --physcpubind=20 #bind21 = numactl -m 1 --physcpubind=21 #bind22 = numactl -m 1 --physcpubind=22 #bind23 = numactl -m 1 --physcpubind=23 submit = echo "$command" > run.sh ; $BIND bash run.sh ##### SSE4.2 SSE = -xSSE4.2 FAST = $(SSE) -ipo -O3 -no-prec-div -static FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div ##### Portability & libraries 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX ##### Tuning Flags default=base=default=default: sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FAST) -opt-prefetch CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch int=peak=default=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FAST) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(FAST) -prof-use PASS1_LDCXXFLAGS = -prof-gen PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench=peak=default: COPTIMIZE= -ansi-alias 401.bzip2=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -opt-prefetch -ansi-alias -auto-ilp32 403.gcc=peak=default: COPTIMIZE = $(FAST) feedback=0 429.mcf=peak=default: COPTIMIZE= $(FAST) -opt-prefetch feedback=0 ####################################################################### %ifdef %{up-nhm} copies=4 %endif %ifdef %{dp-nhm} copies=8 %endif %ifdef %{up-wsm-6c} copies=6 %endif %ifdef %{dp-wsm-6c} copies=12 %endif %ifdef %{1p-nhm-ex} copies=8 %endif %ifdef %{2p-nhm-ex} copies=16 %endif %ifdef %{4p-nhm-ex} copies=32 %endif ####################################################################### 445.gobmk=peak=default: COPTIMIZE= -O2 -ipo -no-prec-div -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= $(FAST) -unroll2 -ansi-alias -auto-ilp32 feedback=no ####################################################################### %ifdef %{up-nhm} copies=4 %endif %ifdef %{dp-nhm} copies=8 %endif %ifdef %{up-wsm-6c} copies=6 %endif %ifdef %{dp-wsm-6c} copies=12 %endif %ifdef %{1p-nhm-ex} copies=8 %endif %ifdef %{2p-nhm-ex} copies=16 %endif %ifdef %{4p-nhm-ex} copies=32 %endif ####################################################################### 458.sjeng=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll4 -auto-ilp32 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: COPTIMIZE= -unroll2 -ansi-alias 471.omnetpp=peak=default: CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=block 473.astar=peak=default: CXX= icpc -m64 CXXPORTABILITY= -DSPEC_CPU_LP64 EXTRA_LIBS= -L$(SMARTHEAP_DIR) -lsmartheap64 CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=routine 483.xalancbmk=peak=default: basepeak=yes ################################################################# default=default=default=default: license_num = 872 test_sponsor = HITACHI hw_avail = Apr-2010 sw_avail = Dec-2009 tester = HITACHI hw_cpu_name = Intel Xeon L5630 hw_cpu_char =Intel Turbo Boost Technology up to 2.40 GHz hw_cpu_mhz = 2133 hw_disk = 4 x 146 GB 10000 rpm SAS hw_fpu = Integrated hw_memory000 = 48 GB (12 x 4 GB 2Rx4 PC3-10600R-9, ECC, hw_memory001 = running at 1066 MHz) hw_model = BladeSymphony BS2000 (Intel Xeon L5630) hw_ncpuorder = 1, 2 chips hw_ncores = 8 hw_nchips = 2 hw_ncoresperchip = 4 hw_nthreadspercore = 2 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 12 MB I+D on chip per chip hw_ocache = None hw_vendor = HITACHI prepared_by = HITACHI sw_file = ext3 sw_os000 = Red Hat Enterprise Linux sw_os001 = Server release 5.4.3, Advanced Platform, sw_os002 = Kernel 2.6.18-164.9.1.el5 on an x86_64 sw_state = Run level 3 (multi-user) sw_other = Microquill SmartHeap V8.1 int=default=default=default: sw_compiler000 = Intel C++ Compiler 11.1 for Linux sw_compiler001 = Build 20091012 Package ID: l_cproc_p_11.1.059 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = http://www.spec.org/cpu2006/flags/Intel-ic11.1-linux64-revE.20110118.xml notes_plat_000 =BIOS Settings: notes_plat_005 =Data Reuse Optimization = Disabled notes_submit_000 ='/usr/bin/numactl' used to bind processes to CPUs notes_os_000 ='ulimit -s unlimited' was used to set the stacksize to unlimited prior to run