# Invocation command line:
# /autobench/sources/speccpu2006/bin/runspec --config fp256c-newbase.cfg --action run --rate 1 --copies 1008 --reportable --tune all --iterations 3 --define mybaseopt=5 --extension rh6-100926a fp
# output_root was not used for this run
############################################################################
#######################################################################
#
# SPEC CPU2006 Benchmark Config file IBM eServer pSeries Linux
#
#######################################################################
# THIS CONFIG FILE IS FOR BUILDING on P6
#
# --define (-S) options that are passed to the runspec command
#               that dynamically affect this config file
#
# numcores=n             The number of cores in the system
#                        to determine how many copies to run in rate
#
# mybaseopt=x            Allows override where x=3,4,5 (-O3, -O4, -O5) for base runs
#
# nolibhuge              Allows override to not use extra libraries on base runs
# nosmartheap
#
# debug                  Adds debug ('-g') compiler option

%define P7 -qarch=pwr7 -qtune=pwr7

%define LHBDT  -B/usr/share/libhugetlbfs/ -tl -Wl,--hugetlbfs-align
%define LHLIB  -lhugetlbfs

######################################

%define FDPROPTS -O4 -omullX
%define FDPRINT
%define make_j 3

#======================================================================
# Global Options apply to all runs
#======================================================================
#
# For just a report generated without a raw file or any runs required
# Do a "runspec --reportonly"   (also --action=report or --fakereport)
#
# Just set up the build or run directories, use --buildsetup or --setup
# on the runspec command

# Sets nobuild as the default - you will need -D to force a compile
# nobuild         = 1

# -D forces a build (recompile)
# -N prohibits a build (recompile)

action                    = validate	# -a
tune                      = base,peak  	# -T
iterations                = 3		# -n
output_format             = text,html,csv    # -o
reportable                = 1		# -l turns off
ignore_errors             = 0		# -I
mean_anyway               = 1
allow_extension_override  = 1
ext                       = XL-ppc64		# -e
size                      = ref
post_setup                = sync

# Include the run-time derived system information so that each
# system run has the correct information
#include: SUT.inc
#  ----- Begin inclusion of 'SUT.inc'
############################################################################
#
company_name = IBM Corporation
hw_vendor    = IBM Corporation
license_num  = 11
sw_state     = Run level 3 (multi-user)
hw_cpu_mhz   = 4004
hw_cpu_name  = POWER7
hw_memory    = 2 TB (256x8 GB) DDR3 1066 MHz
#
#
#
hw_disk      = 17x146.8 GB Raid0 SAS SFF 15K RPM
#
#
sw_os000     = Red Hat Enterprise Linux Server release 6.0
sw_os001 = (ppc64), Kernel 2.6.32-71.el6.ppc64
sw_file      = ext2
#
#
sw_avail     = Nov-2010
#
sw_compiler000 =  IBM XL C/C++ for Linux, V11.1
sw_compiler001 =  Updated with the Nov2010 PTF
sw_compiler002 =  IBM XL Fortran for Linux, V13.1
sw_compiler003 =  Updated with the Nov2010 PTF
sw_other000= -Post-Link Optimization for Linux on
sw_other001=  POWER, Version 5.5.0-3
sw_other002= -MicroQuill SmartHeap 9
sw_other003= -Apache C++ Standard Library V4.2.1
notes_015    =The Apache C++ Standard Library V4.2.1 was installed from
notes_020    =http://stdcxx.apache.org/download.html using:
notes_025    =    gmake BUILDTYPE=8d CONFIG=gcc.config
#
hw_model     = IBM Power 795 (4.0 GHz, 256 core, RedHat)
hw_avail     =Sep-2010
#
hw_ncpuorder       =32,64,96,128,160,192,224,256 cores
hw_nchips          =32
hw_ncores          = 256
hw_nthreadspercore = 4
hw_ncoresperchip   =8
hw_pcache    =32 KB I + 32 KB D on chip per core
hw_fpu       = Integrated
hw_other     =None
#
#
hw_scache    =256 KB I+D on chip per core
hw_tcache    =4 MB I+D on chip per core
hw_ocache    =None
#
#
#
#
#
#
# ppc64_cpu output
# ---- End inclusion of '/autobench/sources/speccpu2006/config/SUT.inc'

# This tells runspec to set enviornment variables of the form
# ENV_xxx if found in here. Forced to 0 for reportable runs
env_vars        = 0

# Control if the embedded md5 string of compiler options is checked for
# recompile if the options have changed
check_md5       = 1

# Controls if the log file info is echo'd to the screen
teeout          = yes

# If 1, make copy of the config file before modifing with MD5
# signitures of the compile options.
backup_config   = 0

# verbose -> -v
#verbose	= 1 to 99, 5 is default, 91 is good for debugging
verbose = 1

%ifdef %{make_j}
makeflags       = -j%{make_j}
%endif

# We alway use submit to ensure there is a binding done.
# use_submit_for_speed If set, use submit commands for speed as well as rate

use_submit_for_speed = 1

copies = 1008

bind = \
0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100 104 108 112 116 120 124 \
128 132 136 140 144 148 152 156 160 164 168 172 176 180 184 188 192 196 200 204 208 212 216 220 224 \
228 232 236 240 244 248 252 256 260 264 268 272 276 280 284 288 292 296 300 304 308 312 316 320 324 \
328 332 336 340 344 348 352 356 360 364 368 372 376 380 384 388 392 396 400 404 408 412 416 420 424 \
428 432 436 440 444 448 452 456 460 464 468 472 476 480 484 488 492 496 500 504 508 512 516 520 524 \
528 532 536 540 544 548 552 556 560 564 568 572 576 580 584 588 592 596 600 604 608 612 616 620 624 \
628 632 636 640 644 648 652 656 660 664 668 672 676 680 684 688 692 696 700 704 708 712 716 720 724 \
728 732 736 740 744 748 752 756 760 764 768 772 776 780 784 788 792 796 800 804 808 812 816 820 824 \
828 832 836 840 844 848 852 856 860 864 868 872 876 880 884 888 892 896 900 904 908 912 916 920 924 \
928 932 936 940 944 948 952 956 960 964 968 972 976 980 984 988 992 996 1000 1004 1008 1012 1016 1020 \
1 5 9 13 17 21 25 29 33 37 41 45 49 53 57 61 65 69 73 77 81 85 89 93 97 101 105 109 113 117 121 125 \
129 133 137 141 145 149 153 157 161 165 169 173 177 181 185 189 193 197 201 205 209 213 217 221 225 \
229 233 237 241 245 249 253 257 261 265 269 273 277 281 285 289 293 297 301 305 309 313 317 321 325 \
329 333 337 341 345 349 353 357 361 365 369 373 377 381 385 389 393 397 401 405 409 413 417 421 425 \
429 433 437 441 445 449 453 457 461 465 469 473 477 481 485 489 493 497 501 505 509 513 517 521 525 \
529 533 537 541 545 549 553 557 561 565 569 573 577 581 585 589 593 597 601 605 609 613 617 621 625 \
629 633 637 641 645 649 653 657 661 665 669 673 677 681 685 689 693 697 701 705 709 713 717 721 725 \
729 733 737 741 745 749 753 757 761 765 769 773 777 781 785 789 793 797 801 805 809 813 817 821 825 \
829 833 837 841 845 849 853 857 861 865 869 873 877 881 885 889 893 897 901 905 909 913 917 921 925 \
929 933 937 941 945 949 953 957 961 965 969 973 977 981 985 989 993 997 1001 1005 1009 1013 1017 1021 \
34 38 42 46 50 54 58 62 66 70 74 78 82 86 90 94 98 102 106 110 114 118 122 126 \
130 134 138 142 146 150 154 158 162 166 170 174 178 182 186 190 194 198 202 206 210 214 218 222 226 \
230 234 238 242 246 250 254 258 262 266 270 274 278 282 286 290 294 298 302 306 310 314 318 322 326 \
330 334 338 342 346 350 354 358 362 366 370 374 378 382 386 390 394 398 402 406 410 414 418 422 426 \
430 434 438 442 446 450 454 458 462 466 470 474 478 482 486 490 494 498 502 506 510 514 518 522 526 \
530 534 538 542 546 550 554 558 562 566 570 574 578 582 586 590 594 598 602 606 610 614 618 622 626 \
630 634 638 642 646 650 654 658 662 666 670 674 678 682 686 690 694 698 702 706 710 714 718 722 726 \
730 734 738 742 746 750 754 758 762 766 770 774 778 782 786 790 794 798 802 806 810 814 818 822 826 \
830 834 838 842 846 850 854 858 862 866 870 874 878 882 886 890 894 898 902 906 910 914 918 922 926 \
930 934 938 942 946 950 954 958 962 966 970 974 978 982 986 990 994 998 1002 1006 1010 1014 1018 1022 \
35 39 43 47 51 55 59 63 67 71 75 79 83 87 91 95 99 103 107 111 115 119 123 127 \
131 135 139 143 147 151 155 159 163 167 171 175 179 183 187 191 195 199 203 207 211 215 219 223 227 \
231 235 239 243 247 251 255 259 263 267 271 275 279 283 287 291 295 299 303 307 311 315 319 323 327 \
331 335 339 343 347 351 355 359 363 367 371 375 379 383 387 391 395 399 403 407 411 415 419 423 427 \
431 435 439 443 447 451 455 459 463 467 471 475 479 483 487 491 495 499 503 507 511 515 519 523 527 \
531 535 539 543 547 551 555 559 563 567 571 575 579 583 587 591 595 599 603 607 611 615 619 623 627 \
631 635 639 643 647 651 655 659 663 667 671 675 679 683 687 691 695 699 703 707 711 715 719 723 727 \
731 735 739 743 747 751 755 759 763 767 771 775 779 783 787 791 795 799 803 807 811 815 819 823 827 \
831 835 839 843 847 851 855 859 863 867 871 875 879 883 887 891 895 899 903 907 911 915 919 923 927 \
931 935 939 943 947 951 955 959 963 967 971 975 979 983 987 991 995 999 1003 1007 1011 1015 1019 1023 \
2 6 10 14 18 22 26 30 \
3 7 11 15 19 23 27 31


submit = let "MYCPU=\$BIND"; MYMEM=`printf '%d' \$((\$MYCPU/32))` ; let "MEMBIND=\$MYMEM" ; if [[ \$MYMEM -eq 0 ]]; then MEMBIND=`printf '%s' 0-3` ; fi ; if [[ \$MYMEM -eq 1 ]]; then MEMBIND=`printf '%s' 0-3` ; fi ; if [[ \$MYMEM -eq 2 ]]; then MEMBIND=`printf '%s' 0-3` ; fi ; if [[ \$MYMEM -eq 3 ]]; then MEMBIND=`printf '%s' 0-3` ; fi ; numactl --physcpubind=\$BIND --membind=\$MEMBIND $command

parallel_setup = 1008
parallel_setup_type    = fork
parallel_setup_prefork = taskset -p -c $BIND $$

#--prevent log file lines that are too long for vi
log_line_width  = 130


# Point to where the usr/compiler/OS Flags file is
flagsurl000     = http://www.spec.org/cpu2006/flags/IBM-Linux-XL.20101123.00.xml

CC_PATH         = /opt/ibmcmp/vac/11.1/bin
CXX_PATH        = /opt/ibmcmp/vacpp/11.1/bin
XLF_PATH        = /opt/ibmcmp/xlf/13.1/bin


#===============================================================================
# How the compilers are called
# The settings used here are for IBM C/C++ and xl Fortran compilers
#===============================================================================
default=default=default=default:

CC      = $(CC_PATH)/xlc -qlanglvl=extc99
CXX     = $(CXX_PATH)/xlC
FC      = $(XLF_PATH)/xlf95

%define IPAC -qipa=noobject
%define IPAL -qipa=threads

EXTRA_CFLAGS   = %{IPAC}
EXTRA_CXXFLAGS = %{IPAC}
EXTRA_FFLAGS   = %{IPAC}
EXTRA_LDFLAGS  = %{IPAL}


#======================================================================
# Base Level Optimizations
#   No limit to number of flags, must be same for all of each Language.
#======================================================================
default=base=default=default:

sw_base_ptrsize = 32-bit

%ifndef %{debug}
%define DEBUG
%else
%define DEBUG -g
%endif

%define BASEOPT -O5 %{DEBUG}

#======================================================================
# INT and FP Portability Flags
#     no optimizations allowed here
#======================================================================
default=default=default=default:

400.perlbench=default=default=default:
CPORTABILITY   = -DSPEC_CPU_LINUX_PPC

462.libquantum=default=default=default:
CPORTABILITY   = -DSPEC_CPU_LINUX

464.h264ref=default=default=default:
CPORTABILITY   = -qchars=signed

483.xalancbmk=default=default=default:
CXXPORTABILITY = -DSPEC_CPU_LINUX

410.bwaves=default=default=default:
FPORTABILITY   = -qfixed

416.gamess=default=default=default:
FPORTABILITY   = -qfixed

434.zeusmp=default=default=default:
FPORTABILITY   = -qfixed

435.gromacs=default=default=default:
FPORTABILITY   = -qfixed -qextname

436.cactusADM=default=default=default:
FPORTABILITY   = -qfixed -qextname

437.leslie3d=default=default=default:
FPORTABILITY   = -qfixed

447.dealII=default=default=default:
srcalt=apache_stdcxx_4_2_1

454.calculix=default=default=default:
FPORTABILITY   = -qfixed -qextname

481.wrf=default=default=default:
CPORTABILITY   = -DNOUNDERSCORE

482.sphinx3=default=default=default:
CPORTABILITY   = -qchars=signed

#======================================================================
# INT and FP Base Flags
#======================================================================
int=base=default=default:
COPTIMIZE      = %{BASEOPT} -qalias=noansi -qalloca
CXXOPTIMIZE    = %{BASEOPT} -qrtti
EXTRA_CLIBS    = %{LHLIB}
EXTRA_CXXLIBS  = -lsmartheap

fp=base=default=default:
COPTIMIZE      = %{BASEOPT}
EXTRA_CLIBS    = %{LHLIB}
FOPTIMIZE      = %{BASEOPT} -qalias=nostd
EXTRA_FLIBS    = %{LHLIB}
CXXOPTIMIZE    = -O4 -qrtti
EXTRA_CXXFLAGS = %{IPAC} -qcpp_stdinc=/root/stdcxx421/include/ansi:/root/stdcxx421/include:/opt/ibmcmp/vacpp/11.1/include
EXTRA_CXXLIBS  = %{LHLIB} -L/root/stdcxx421/lib -R/root/stdcxx421/lib -lstd8d

#======================================================================
#
# Default peak flags.
#
#======================================================================

default=peak=default=default:
sw_peak_ptrsize = 32/64-bit

%define O2 -O2 -qarch=auto -qtune=auto %{DEBUG}
%define O3 -O3 -qarch=auto -qtune=auto %{DEBUG}
%define O4 -O4 %{DEBUG}
%define O5 -O5 %{DEBUG}

#======================================================================
# INT peak Flags
#======================================================================
int=peak=default=default:

400.perlbench=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O4} -qalias=noansi -qipa=level=2
EXTRA_LIBS     = -lsmartheap
LDCFLAGS       = -Wl,-q
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
fdo_pre2         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr -imullX ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -omullX ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
CPORTABILITY   = -DSPEC_CPU_LINUX_PPC -DSPEC_CPU_LP64
COPTIMIZE      = -q64
%else
CPORTABILITY   = -DSPEC_CPU_LINUX_PPC
%endif
notes_peak_fdpr_400_000= fdpr binary optimization tool used for 400.perlbench
notes_peak_fdpr_400_005=  with options -O4 -omullX for optimization phase,
notes_peak_fdpr_400_010= and -imullX for instrumentation phase

401.bzip2=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O3}
EXTRA_LIBS     = %{LHLIB}
LDCFLAGS       = -Wl,-q
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
fdo_pre2         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -vrox ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
COPTIMIZE      = -q64
%endif
notes_peak_fdpr_401_000= fdpr binary optimization tool used for 401.bzip2
notes_peak_fdpr_401_005=  with options -O4 -vrox

403.gcc=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O4} -qalloca
EXTRA_LIBS     = %{LHLIB}
LDCFLAGS       = -Wl,-q
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
fdo_pre2         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -nodp -rtb ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
CPORTABILITY   = -DSPEC_CPU_LP64
COPTIMIZE      = -q64
%endif
notes_peak_fdpr_403_000= fdpr binary optimization tool used for 403.gcc
notes_peak_fdpr_403_005=  with options -O4 -nodp -rtb

429.mcf=peak=default=default:
# C only Benchmark
copies         = 128
OPTIMIZE       = %{O5}
EXTRA_LIBS     = %{LHLIB}
LDCFLAGS       = -Wl,-q
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
fdo_pre2         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
COPTIMIZE      = -q64
%endif
notes_peak_fdpr_429_000= fdpr binary optimization tool used for 429.mcf
notes_peak_fdpr_429_005=  with options -O3

445.gobmk=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O4}
EXTRA_LIBS     = %{LHLIB}
LDCFLAGS       = -Wl,-q
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
fdo_pre2         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
COPTIMIZE      = -q64
%endif
notes_peak_fdpr_445_000= fdpr binary optimization tool used for 445.gobmk
notes_peak_fdpr_445_005=  with options -O3

456.hmmer=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O5} -qsimd -qassert=refalign -qipa=inline=threshold=2888 -qipa=inline=limit=11880
EXTRA_LIBS     = %{LHLIB}
LDCFLAGS       = -Wl,-q
fdo_pre1       = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run1       = $command
fdo_post1      = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -nodp -m power7 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
COPTIMIZE      = -q64
%endif
notes_peak_fdpr_456_000= fdpr binary optimization tool used for 456.hmmer
notes_peak_fdpr_456_005=  with options -O4 -nodp -m power7


458.sjeng=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O5}
EXTRA_LIBS     = %{LHLIB}
LDCFLAGS       = -Wl,-q
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
fdo_pre2         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
COPTIMIZE      = -q64
%endif
notes_peak_fdpr_458_000= fdpr binary optimization tool used for 458.sjeng
notes_peak_fdpr_458_005=  with options -O3


462.libquantum=peak=default=default:
# C only Benchmark
%define 64
OPTIMIZE       = %{O5}
EXTRA_LIBS     = %{LHLIB}
LDCFLAGS       = -Wl,-q
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
fdo_pre2         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -vrox -nodp ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
COPTIMIZE      = -q64
%endif
%undef 64
notes_peak_fdpr_462_000= fdpr binary optimization tool used for 462.libquantum
notes_peak_fdpr_462_005=  with options -O4 -vrox -nodp


464.h264ref=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O5}
EXTRA_LIBS     = %{LHLIB}
LDCFLAGS       = -Wl,-q
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
fdo_pre2         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -vrox -nodp -rtb ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
COPTIMIZE      = -q64
%endif
notes_peak_fdpr_464_000= fdpr binary optimization tool used for 464.h264ref
notes_peak_fdpr_464_005=  with options -O4 -vrox -nodp -rtb

471.omnetpp=peak=default=default:
# C++ Benchmark
OPTIMIZE       = %{O5} -qrtti
EXTRA_LIBS     = -lsmartheap
LDCXXFLAGS     = -Wl,-q
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2
fdo_pre2         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 -lu -1 -nodp -sdp 9 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
CXXOPTIMIZE    = -q64
%endif
notes_peak_fdpr_471_000= fdpr binary optimization tool used for 471.omnetpp
notes_peak_fdpr_471_005=  with options -O3 -lu -1 -nodp -sdp 9

473.astar=peak=default=default:
# C++ Benchmark
OPTIMIZE       = %{O4} -qipa=inline=threshold=2468 -qipa=inline=limit=11060 -qipa=partition=large
EXTRA_LIBS     = %{LHLIB} -lsmartheap
LDCXXFLAGS     = -Wl,-q
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2
fdo_pre2         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
CXXOPTIMIZE    = -q64
%endif
notes_peak_fdpr_473_000= fdpr binary optimization tool used for 473.astar
notes_peak_fdpr_473_005=  with options -O3

483.xalancbmk=peak=default=default:
# C++ Benchmark
OPTIMIZE         = -O4 -qarch=pwr5 -qtune=pwr5 -qipa=inline=threshold=2468 -qipa=inline=limit=11060 -qipa=partition=large
EXTRA_LIBS       = -lsmartheap
LDCXXFLAGS       = -Wl,-q
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2
fdo_pre2         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 -m power7 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
CXXOPTIMIZE    = -q64
%endif
notes_peak_fdpr_483_000= fdpr binary optimization tool used for 483.xalancbmk
notes_peak_fdpr_483_005=  with options -O3 -m power7


999.specrand=peak=default=default:
# C only Benchmark - Must run, but not reported unless fails
OPTIMIZE       = %{O5}
EXTRA_LIBS     = %{LHLIB}
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2

#======================================================================
# FP peak Flags
#======================================================================

fp=peak=default=default:

410.bwaves=peak=default=default:
# Fortran Benchmark
%define 64
OPTIMIZE       = %{O5}
EXTRA_LIBS     = %{LHLIB}
PASS1_FFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%ifdef %{64}
FOPTIMIZE      = -q64
%endif
%undef 64

416.gamess=peak=default=default:
# Fortran Benchmark
copies = 1024
OPTIMIZE       = %{O5} -qalias=nostd
EXTRA_LIBS     = %{LHLIB}
PASS1_FFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%ifdef %{64}
FOPTIMIZE      = -q64
%endif

433.milc=peak=default=default:
# C only Benchmark
copies = 256
submit = let "MYCPU=\$BIND"; MYMEM=`printf '%d' \$((\$MYCPU/32))` ; numactl --physcpubind=\$BIND --membind=\$MYMEM $command
OPTIMIZE       = %{O5}
EXTRA_LIBS     = %{LHLIB}
LDCFLAGS       = -Wl,-q
fdo_pre1         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run1         = $command
fdo_post1        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -nodp ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
COPTIMIZE      = -q64
%endif
notes_peak_fdpr_433_000= Post-Link optimization tool used for:
notes_peak_fdpr_433_005= 433.milc 435.gromacs 436.cactusADM 450.soplex 482.sphinx3
notes_peak_fdpr_433_010 =      with options -O4 -nodp

434.zeusmp=peak=default=default:
# Fortran Benchmark
copies = 1024
OPTIMIZE       = %{O5} -qsmallstack=dynlenonheap -qalias=nostd
EXTRA_LIBS     = %{LHBDT}
%ifdef %{64}
FOPTIMIZE      = -q64
%endif

435.gromacs=peak=default=default:
# Fortran & C Benchmark
copies = 1024
OPTIMIZE       = %{O4} -qsimd
EXTRA_LIBS     = %{LHLIB}
LDCFLAGS       = -Wl,-q
LDFFLAGS       = -Wl,-q
PASS1_FFLAGS   = -qpdf1
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
fdo_pre2         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -nodp ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
COPTIMIZE      = -q64
FOPTIMIZE      = -q64
%endif

436.cactusADM=peak=default=default:
# Fortran & C Benchmark
copies = 512
submit = let "MYCPU=\$BIND"; MYMEM=`printf '%d' \$((\$MYCPU/32))` ; numactl --physcpubind=\$BIND --membind=\$MYMEM $command
%define 64
OPTIMIZE       = %{O4} -q64 -qsimd -qnostrict
FOPTIMIZE      = -qsmallstack=dynlenonheap -qalias=nostd
EXTRA_LIBS     = %{LHLIB}
LDCFLAGS       = -Wl,-q
LDFFLAGS       = -Wl,-q
fdo_pre1         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run1         = $command
fdo_post1        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -nodp ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
FPORTABILITY   = -qfixed -qextname
FPPPORTABILITY = -DSPEC_CPU_LP64
%else
FPORTABILITY   = -qfixed -qextname
%endif
%undef 64

437.leslie3d=peak=default=default:
# Fortran Benchmark
copies = 256
submit = let "MYCPU=\$BIND"; MYMEM=`printf '%d' \$((\$MYCPU/32))` ; numactl --physcpubind=\$BIND --membind=\$MYMEM $command
OPTIMIZE       = %{O5}
EXTRA_LIBS     = %{LHLIB}
#LDFFLAGS       = -Wl,-q
#fdo_pre1         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
#fdo_run1         = $command
#fdo_post1        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 -lu -1 -nodp -sdp 9 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
FOPTIMIZE      = -q64
%endif
#notes_peak_fdpr_437_1 = fdpr binary optimization tool used for 437.leslie3d
#notes_peak_fdpr_437_2 =  with options -O3 -lu -1 -nodp -sdp 9

444.namd=peak=default=default:
# C++ Benchmark
copies = 1024
OPTIMIZE       = %{O5}
EXTRA_LIBS     = %{LHLIB}
LDCXXFLAGS     = -Wl,-q
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2
fdo_pre2         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 -lu -1 -nodp -sdp 9 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
CXXOPTIMIZE    = -q64
%endif

447.dealII=peak=default=default:
# C++ Benchmark
copies = 1024
OPTIMIZE       = %{O4} -qrtti
EXTRA_CXXFLAGS = %{IPAC} -qcpp_stdinc=/root/stdcxx421/include/ansi:/root/stdcxx421/include:/opt/ibmcmp/vacpp/11.1/include
EXTRA_CXXLIBS  = -L/root/stdcxx421/lib -R/root/stdcxx421/lib -lstd8d
EXTRA_LIBS     = -lsmartheap %{LHLIB}
%ifdef %{64}
CXXOPTIMIZE    = -q64
%endif

450.soplex=peak=default=default:
# C++ Benchmark
OPTIMIZE       = %{O3}
EXTRA_LIBS     = %{LHLIB}
LDCXXFLAGS     = -Wl,-q
fdo_pre1         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run1         = $command
fdo_post1        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -nodp ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
CXXOPTIMIZE    = -q64
%endif

453.povray=peak=default=default:
# C++ Benchmark
copies = 1024
%define 64
OPTIMIZE       = %{O4} -qsimd
EXTRA_LIBS     = -lsmartheap64
LDCXXFLAGS     = -Wl,-q
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%ifdef %{64}
CXXPORTABILITY = -DSPEC_CPU_LP64
CXXOPTIMIZE    = -q64
%endif
%undef 64

454.calculix=peak=default=default:
# Fortran & C Benchmark
copies = 1024
OPTIMIZE       = %{O5}
EXTRA_LIBS     = %{LHLIB}
PASS1_FFLAGS   = -qpdf1
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%ifdef %{64}
FOPTIMIZE      = -q64
COPTIMIZE      = -q64
%endif

459.GemsFDTD=peak=default=default:
# Fortran Benchmark
basepeak = 1
OPTIMIZE       = %{O4} -qsimd
EXTRA_LIBS     = %{LHLIB}
%ifdef %{64}
FOPTIMIZE      = -q64
%endif

465.tonto=peak=default=default:
# Fortran Benchmark
copies = 1024
OPTIMIZE       = %{O5} -qsimd
EXTRA_LIBS     = %{LHLIB}
PASS1_FFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
LDFFLAGS       = -Wl,-q
fdo_pre2         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
FOPTIMIZE      = -q64
%endif
notes_peak_fdpr_465_000= 465.tonto
notes_peak_fdpr_465_005=      with options -O4

470.lbm=peak=default=default:
# C Benchmark
OPTIMIZE       = %{O5}
EXTRA_LIBS     = %{LHLIB}
LDCFLAGS       = -Wl,-q
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
fdo_pre2     = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2     = $command
fdo_post2    = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -kr -O4 -sdp 9 -vrox -m power7 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
COPTIMIZE      = -q64
%endif


481.wrf=peak=default=default:
# Fortran & C-for netCDF Benchmark
copies = 1024
%define 64
OPTIMIZE       = %{O3}
EXTRA_LIBS     = %{LHLIB}
%ifdef %{64}
COPTIMIZE      = -q64
FOPTIMIZE      = -q64
%endif
%undef 64

482.sphinx3=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O4}
EXTRA_LIBS     = %{LHLIB}
LDCFLAGS       = -Wl,-q
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
fdo_pre2         = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe}
fdo_run2         = $command
fdo_post2        = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -nodp ${baseexe} ; cp ${baseexe}.fdpr ${baseexe}
%ifdef %{64}
COPTIMIZE      = -q64
%endif

998.specrand=peak=default=default:
# C only Benchmark - Must run, but not reported unless fails
OPTIMIZE       = %{O5}




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.

482.sphinx3:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


481.wrf:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


447.dealII:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


437.leslie3d:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


470.lbm:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1

default:
test_sponsor = IBM Corporation
tester = IBM Corporation
notes_000 =447.dealII (peak): "apache_stdcxx_4_2_1" src.alt was used.
notes_005 =447.dealII (base): "apache_stdcxx_4_2_1" src.alt was used.
notes_010 =
hw_cpu_char000 = Intelligent Energy Optimization
hw_cpu_char001 = enabled, up to 4.14 GHz
notes_peak_fdpr_434_000 = 434.zeusmp
notes_peak_fdpr_434_005 =      with options -O4 -vrox -nodp
notes_peak_fdpr_437_000 = 437.leslie3d 444.namd
notes_peak_fdpr_437_005 =      with options -O3 -lu -1 -nodp -sdp 9
notes_peak_fdpr_470_000 = 470.lbm
notes_peak_fdpr_470_005 =      with options -kr -O4 -sdp 9 -vrox -m power7
notes_submit_000 =Benchmarks bound to a processor using numactl on the submit command.
notes_os_000 = ulimit -s (stack) set to 2097152.
notes_os_005 = ulimit -n (open files) set to 20480.
notes_os_010 = ulimit -u (user processes) set to unlimited
notes_os_015 =Large pages reserved as follows by root user:
notes_os_020 =      echo 68608 > /proc/sys/vm/nr_overcommit_hugepages
notes_os_025 =The following environment varibles were set before the runspec command:
notes_os_030 =      export HUGETLB_VERBOSE=0
notes_os_035 =      export HUGETLB_MORECORE=yes
notes_os_040 =      export HUGETLB_ELFMAP=RW
notes_os_045 =      export XLFRTEOPTS=intrinthds=1