# Invocation command line: # /cpu2006/bin/runspec --rate 64 -c hp-cpu2006.1.1-ic11.1.linux64.nhm-ex.rate.cfg --flagsurl=Intel-ic11.0-int-linux64-revE1.xml --flagsurl=hp-20091106-intel-linux-settings-flags.xml --define ex-nhm -T all -o all int # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 11.0 # Operating system version: 64-Bit SUSE LINUX Enterprise Server 10 or later # Hardware: Intel processors supporting SSE4.2 # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # July 2008 Intel Compiler 11.0 for Linux64 ############################################################################ action = validate tune = base ext = cpu2006.1.1.ic11.1.rate.new PATHSEP = / check_md5=1 reportable=1 verbose = 6 mean_anyway = yes makeflags = -j 32 # # These are listed as benchmark-tuning-extension-machine # default=default=default=default: CC = icc CXX = icpc FC=ifort OBJ = .o SMARTHEAP_DIR = /cpu2006/SmartHeap_8.1/lib # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores %ifdef %{up-nhm} %ifdef %{physicalfirst} bind= 0, 1, 2, 3, 4, 5, 6, 7 %endif %ifdef %{physicallogical} bind= 0, 2, 4, 6, 1, 3, 5, 7 %endif %endif %ifdef %{dp-nhm} %ifdef %{physicalfirst} bind= 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 %endif %ifdef %{physicallogical} bind= 0, 2, 4, 6, 8, 10, 12, 14, 1, 3, 5, 7, 9, 11, 13, 15 %endif %endif %ifdef %{4p-nhm} bind= < run.sh submit1 = if `test $SPECCOPYNUM -eq 0 `; then numactl -m 0 --physcpubind=0 sh run.sh; fi submit2 = if `test $SPECCOPYNUM -eq 1 `; then numactl -m 1 --physcpubind=1 sh run.sh; fi submit3 = if `test $SPECCOPYNUM -eq 2 `; then numactl -m 2 --physcpubind=2 sh run.sh; fi submit4 = if `test $SPECCOPYNUM -eq 3 `; then numactl -m 3 --physcpubind=3 sh run.sh; fi submit5 = if `test $SPECCOPYNUM -eq 4 `; then numactl -m 0 --physcpubind=4 sh run.sh; fi submit6 = if `test $SPECCOPYNUM -eq 5 `; then numactl -m 1 --physcpubind=5 sh run.sh; fi submit7 = if `test $SPECCOPYNUM -eq 6 `; then numactl -m 2 --physcpubind=6 sh run.sh; fi submit8 = if `test $SPECCOPYNUM -eq 7 `; then numactl -m 3 --physcpubind=7 sh run.sh; fi submit9 = if `test $SPECCOPYNUM -eq 8 `; then numactl -m 0 --physcpubind=8 sh run.sh; fi submit10 = if `test $SPECCOPYNUM -eq 9 `; then numactl -m 1 --physcpubind=9 sh run.sh; fi submit11 = if `test $SPECCOPYNUM -eq 10 `; then numactl -m 2 --physcpubind=10 sh run.sh; fi submit12 = if `test $SPECCOPYNUM -eq 11 `; then numactl -m 3 --physcpubind=11 sh run.sh; fi submit13 = if `test $SPECCOPYNUM -eq 12 `; then numactl -m 0 --physcpubind=12 sh run.sh; fi submit14 = if `test $SPECCOPYNUM -eq 13 `; then numactl -m 1 --physcpubind=13 sh run.sh; fi submit15 = if `test $SPECCOPYNUM -eq 14 `; then numactl -m 2 --physcpubind=14 sh run.sh; fi submit16 = if `test $SPECCOPYNUM -eq 15 `; then numactl -m 3 --physcpubind=15 sh run.sh; fi submit17 = if `test $SPECCOPYNUM -eq 16 `; then numactl -m 0 --physcpubind=16 sh run.sh; fi submit18 = if `test $SPECCOPYNUM -eq 17 `; then numactl -m 1 --physcpubind=17 sh run.sh; fi submit19 = if `test $SPECCOPYNUM -eq 18 `; then numactl -m 2 --physcpubind=18 sh run.sh; fi submit20 = if `test $SPECCOPYNUM -eq 19 `; then numactl -m 3 --physcpubind=19 sh run.sh; fi submit21 = if `test $SPECCOPYNUM -eq 20 `; then numactl -m 0 --physcpubind=20 sh run.sh; fi submit22 = if `test $SPECCOPYNUM -eq 21 `; then numactl -m 1 --physcpubind=21 sh run.sh; fi submit23 = if `test $SPECCOPYNUM -eq 22 `; then numactl -m 2 --physcpubind=22 sh run.sh; fi submit24 = if `test $SPECCOPYNUM -eq 23 `; then numactl -m 3 --physcpubind=23 sh run.sh; fi submit25 = if `test $SPECCOPYNUM -eq 24 `; then numactl -m 0 --physcpubind=24 sh run.sh; fi submit26 = if `test $SPECCOPYNUM -eq 25 `; then numactl -m 1 --physcpubind=25 sh run.sh; fi submit27 = if `test $SPECCOPYNUM -eq 26 `; then numactl -m 2 --physcpubind=26 sh run.sh; fi submit28 = if `test $SPECCOPYNUM -eq 27 `; then numactl -m 3 --physcpubind=27 sh run.sh; fi submit29 = if `test $SPECCOPYNUM -eq 28 `; then numactl -m 0 --physcpubind=28 sh run.sh; fi submit30 = if `test $SPECCOPYNUM -eq 29 `; then numactl -m 1 --physcpubind=29 sh run.sh; fi submit31 = if `test $SPECCOPYNUM -eq 30 `; then numactl -m 2 --physcpubind=30 sh run.sh; fi submit32 = if `test $SPECCOPYNUM -eq 31 `; then numactl -m 3 --physcpubind=31 sh run.sh; fi submit33 = if `test $SPECCOPYNUM -eq 32 `; then numactl -m 0 --physcpubind=32 sh run.sh; fi submit34 = if `test $SPECCOPYNUM -eq 33 `; then numactl -m 1 --physcpubind=33 sh run.sh; fi submit35 = if `test $SPECCOPYNUM -eq 34 `; then numactl -m 2 --physcpubind=34 sh run.sh; fi submit36 = if `test $SPECCOPYNUM -eq 35 `; then numactl -m 3 --physcpubind=35 sh run.sh; fi submit37 = if `test $SPECCOPYNUM -eq 36 `; then numactl -m 0 --physcpubind=36 sh run.sh; fi submit38 = if `test $SPECCOPYNUM -eq 37 `; then numactl -m 1 --physcpubind=37 sh run.sh; fi submit39 = if `test $SPECCOPYNUM -eq 38 `; then numactl -m 2 --physcpubind=38 sh run.sh; fi submit40 = if `test $SPECCOPYNUM -eq 39 `; then numactl -m 3 --physcpubind=39 sh run.sh; fi submit41 = if `test $SPECCOPYNUM -eq 40 `; then numactl -m 0 --physcpubind=40 sh run.sh; fi submit42 = if `test $SPECCOPYNUM -eq 41 `; then numactl -m 1 --physcpubind=41 sh run.sh; fi submit43 = if `test $SPECCOPYNUM -eq 42 `; then numactl -m 2 --physcpubind=42 sh run.sh; fi submit44 = if `test $SPECCOPYNUM -eq 43 `; then numactl -m 3 --physcpubind=43 sh run.sh; fi submit45 = if `test $SPECCOPYNUM -eq 44 `; then numactl -m 0 --physcpubind=44 sh run.sh; fi submit46 = if `test $SPECCOPYNUM -eq 45 `; then numactl -m 1 --physcpubind=45 sh run.sh; fi submit47 = if `test $SPECCOPYNUM -eq 46 `; then numactl -m 2 --physcpubind=46 sh run.sh; fi submit48 = if `test $SPECCOPYNUM -eq 47 `; then numactl -m 3 --physcpubind=47 sh run.sh; fi submit49 = if `test $SPECCOPYNUM -eq 48 `; then numactl -m 0 --physcpubind=48 sh run.sh; fi submit50 = if `test $SPECCOPYNUM -eq 49 `; then numactl -m 1 --physcpubind=49 sh run.sh; fi submit51 = if `test $SPECCOPYNUM -eq 50 `; then numactl -m 2 --physcpubind=50 sh run.sh; fi submit52 = if `test $SPECCOPYNUM -eq 51 `; then numactl -m 3 --physcpubind=51 sh run.sh; fi submit53 = if `test $SPECCOPYNUM -eq 52 `; then numactl -m 0 --physcpubind=52 sh run.sh; fi submit54 = if `test $SPECCOPYNUM -eq 53 `; then numactl -m 1 --physcpubind=53 sh run.sh; fi submit55 = if `test $SPECCOPYNUM -eq 54 `; then numactl -m 2 --physcpubind=54 sh run.sh; fi submit56 = if `test $SPECCOPYNUM -eq 55 `; then numactl -m 3 --physcpubind=55 sh run.sh; fi submit57 = if `test $SPECCOPYNUM -eq 56 `; then numactl -m 0 --physcpubind=56 sh run.sh; fi submit58 = if `test $SPECCOPYNUM -eq 57 `; then numactl -m 1 --physcpubind=57 sh run.sh; fi submit59 = if `test $SPECCOPYNUM -eq 58 `; then numactl -m 2 --physcpubind=58 sh run.sh; fi submit60 = if `test $SPECCOPYNUM -eq 59 `; then numactl -m 3 --physcpubind=59 sh run.sh; fi submit61 = if `test $SPECCOPYNUM -eq 60 `; then numactl -m 0 --physcpubind=60 sh run.sh; fi submit62 = if `test $SPECCOPYNUM -eq 61 `; then numactl -m 1 --physcpubind=61 sh run.sh; fi submit63 = if `test $SPECCOPYNUM -eq 62 `; then numactl -m 2 --physcpubind=62 sh run.sh; fi submit64 = if `test $SPECCOPYNUM -eq 63 `; then numactl -m 3 --physcpubind=63 sh run.sh; fi #################################################################### # Compiler options # for Nehalem use -xSSE4.2 # for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3 #################################################################### SSE = -xSSE4.2 FAST = $(SSE) -ipo -O3 -no-prec-div -static FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX fp=default: PORTABILITY = -DSPEC_CPU_LP64 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FAST) -opt-prefetch CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch fp=base=default=default: OPTIMIZE= $(FAST) ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FAST) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(FAST) -prof-use PASS1_LDCXXFLAGS = -prof-gen PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench=peak=default: COPTIMIZE= -ansi-alias 401.bzip2=peak=default: CC= /opt/intel/Compiler/11.1/056/bin/intel64/icc CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -opt-prefetch -ansi-alias -auto-ilp32 403.gcc=peak=default: COPTIMIZE = $(FAST) feedback=0 429.mcf=peak=default: COPTIMIZE= $(FAST) -opt-prefetch ############################################################################################################# %ifdef %{up-nhm} copies=4 %endif %ifdef %{dp-nhm} copies=8 %endif %ifdef %{ex-nhm} copies=32 %endif ############################################################################################################# 445.gobmk=peak=default: COPTIMIZE= -O2 -ipo -no-prec-div -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: CC= /opt/intel/Compiler/11.1/056/bin/intel64/icc CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= $(FAST) -unroll2 -ansi-alias -auto-ilp32 feedback=no 458.sjeng=peak=default: CC= /opt/intel/Compiler/11.1/056/bin/intel64/icc CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll4 -auto-ilp32 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: COPTIMIZE= -unroll2 -ansi-alias 471.omnetpp=peak=default: CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=block 473.astar=peak=default: CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=routine 483.xalancbmk=peak=default: basepeak=yes ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 CXXOPTIMIZE= -auto-ilp32 PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FAST) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FAST) -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = $(FAST) -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = $(FAST) -prof-use 410.bwaves=peak=default: OPTIMIZE= $(FAST) -opt-prefetch feedback=0 ############################################################################################################# %ifdef %{up-nhm} copies=4 %endif %ifdef %{dp-nhm} copies=8 %endif %ifdef %{ex-nhm} copies=32 %endif ############################################################################################################# 416.gamess=peak=default: OPTIMIZE= -unroll2 -Ob0 -ansi-alias -scalar-rep- %ifdef %{ex-nhm} copies=32 %endif 433.milc=peak=default: OPTIMIZE= -fno-alias -opt-prefetch COPTIMIZE= 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: OPTIMIZE= -opt-prefetch 436.cactusADM=peak=default: OPTIMIZE= -unroll2 -opt-prefetch ############################################################################################################# %ifdef %{ex-nhm} copies=16 %endif ############################################################################################################# 437.leslie3d=peak=default: PORTABILITY = FC= ifort -m32 OPTIMIZE= -opt-malloc-options=3 -opt-prefetch ############################################################################################################# %ifdef %{ex-nhm} copies=16 %endif ############################################################################################################# 444.namd=peak=default: CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: CXXOPTIMIZE= -unroll2 -ansi-alias -scalar-rep- 450.soplex=peak=default: PORTABILITY = CXX= icpc -m32 OPTIMIZE= -opt-malloc-options=3 CXXOPTIMIZE= ############################################################################################################# %ifdef %{up-nhm} copies=4 %endif %ifdef %{dp-nhm} copies=8 %endif %ifdef %{ex-nhm} copies=32 %endif ############################################################################################################# 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: basepeak=yes 459.GemsFDTD=peak=default: OPTIMIZE= -unroll2 -Ob0 -opt-prefetch ############################################################################################################# %ifdef %{ex-nhm} copies=32 %endif ############################################################################################################# 465.tonto=peak=default: OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3 470.lbm=peak=default: OPTIMIZE= -opt-malloc-options=3 -ansi-alias %ifdef %{ex-nhm} copies=16 %endif feedback=no ############################################################################################################# %ifdef %{up-nhm} copies=4 %endif %ifdef %{dp-nhm} copies=8 %endif ############################################################################################################# 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: PORTABILITY = CC= icc -m32 OPTIMIZE= $(FAST) COPTIMIZE= -unroll2 feedback=no ############################################################################################################# %ifdef %{ex-nhm} copies=32 %endif ############################################################################################################# ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 3 test_sponsor = Hewlett-Packard Company hw_avail = Jun-2010 sw_avail = Mar-2010 tester = Hewlett-Packard Company hw_cpu_name = Intel Xeon X7560 hw_cpu_char = Intel Turbo Boost Technology up to 2.67 GHz hw_cpu_mhz = 2267 hw_disk = 2 x 146 GB 15 K SAS hw_fpu = Integrated hw_memory = 1 TB (64 x 16 GB 4Rx4 PC3-8500R CL7) hw_ncpuorder = 2,4 chips hw_ncores = 32 hw_nchips = 4 hw_ncoresperchip = 8 hw_nthreadspercore = 2 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 24 MB I+D on chip per chip hw_ocache = None hw_vendor = Hewlett-Packard Company prepared_by = Hewlett-Packard Company sw_file = ext3 sw_state = Run level 3 (multi-user) int=default=default=default: sw_compiler000 = Intel C++ Compiler 11.1 for Linux sw_compiler001 = Build 20090827 Package ID: l_cproc_p_11.1.056 sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit sw_other000 = Microquill SmartHeap V8.1 sw_other001 = Binutils 2.17.50.0.6-12.el5 fp=default=default=default: sw_compiler001 = Intel C++ and Fortran Compiler 11.0 for Linux sw_compiler002 = Build 20090827 Package ID: l_cproc_p_11.1.056, l_cprof_p_11.1.056 sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit notes_028 = OMP_NUM_THREADS set to number of processors notes_029 = KMP_AFFINITY set to "physical,0" notes_030 = KMP_STACKSIZE set to 64M # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 429.mcf: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 403.gcc: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: flagsurl000 = http://www.spec.org/cpu2006/flags/Intel-ic11.1-linux64-revF.xml flagsurl001 = http://www.spec.org/cpu2006/flags/HP-Intel-Linux-Settings-flags.20100525.xml sw_os000 = Red Hat Enterprise Linux Server release 5.5 sw_os001 = Advanced Platform, Kernel 2.6.18-194.el5 notes_plat_000 = BIOS configuration: notes_plat_005 = Power Profile set to Maximum Performance notes_plat_010 = Thermal Configuration set to Increased Cooling notes_submit_000 = numactl was used to bind copies to the cores hw_model000 = ProLiant DL580 G7 hw_model001 = (2.27 GHz, Intel Xeon X7560) notes_os_000 = 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run