# Invocation command line:
# /work/cpu2006-v10/bin/runspec -c intel-speed-fp -T all --input ref -n 3 -o all fp
# output_root was not used for this run
############################################################################
############################################################################
# This is a sample config file. It was tested with:                                                              
#                                                                                                                
#      Compiler name/version:       Intel Compiler 10.1 Mainline
#      Operating system version:    64-Bit SUSE LINUX Enterprise Server 10 or later 
#      Hardware:                    Intel Core 2 and compatible Intel processors 
#                                   supporting Intel 64 and SSSE3 
#                                                                                                                
############################################################################
# SPEC CPU2006 Intel Linux64 config file
# Aug 24 2007 Intel Compiler 10.1 for Linux64
############################################################################
action      = validate
tune        = base
ext         = cpu2006.1.0.ic10.1.20070824.linux64.speed
PATHSEP     = /
check_md5=1
reportable=1
mean_anyway = 1

# flagsurl = config/Intel-ic10-FP-intel64-linux64-flags-file-20070525.xml
flagsurl000= http://www.spec.org/cpu2006/flags/Intel-ic10.1-FP-intel64-linux-flags.20090714.13.xml

#include: SUT.inc
#  ----- Begin inclusion of 'SUT.inc'
############################################################################
	# File to be included into config file for SPEC CPU2000

# This include file specifies the "System Under Test" (Hardware,
# OS, BIOS, etc.)
# Any information about the binaries is elsewhere.

# To avoid conflicts in the numbering of the notes,
# please use only 900 and higher numbers.

# Use of thread-binding controlled by macro

%ifdef %{binding}
use_submit_for_speed=1
submit = /usr/bin/taskset -c $SPECCOPYNUM $command

# submit0 = MYMASK=\$((1<<$SPECCOPYNUM))
# submit1 = /usr/bin/taskset \$MYMASK $command

# submit= MYMASK=\$((1<<\$SPECCOPYNUM)) ; /usr/bin/taskset \$MYMASK $command
# submit=MYMASK=`printf '0x%x' \$((1<<$SPECCOPYNUM))` ; /usr/bin/taskset \$MYMASK $command
notes915=taskset has been used to bind processes to CPUs
%endif

################################################################
# System information
# If some remarks about BIOS or Firmware are needed, place them here.
################################################################

default=default=default=default:
notes_000=
notes_005= This result has been produced with binaries provided and compiled by Intel.
notes_010=

int=default=default=default:
notes903= All binaries were built with 32-bit Intel compiler except:
notes904= 401.bzip2 and 456.hmmer in peak were built with 64-bit Intel
notes905= compiler by changing the path for include and library files.

fp=default=default=default:
notes_015= All binaries were built with 64-bit Intel compiler except:
notes_020= 450.soplex, 470.lbm and 482.sphinx3 in peak were built with
notes_025= 32-bit Intel compiler by changing the path for include and library files.

default=default=default=default:
notes_030=
notes_plat_000= BIOS configuration:
notes_plat_005= Enhanced Speedstep Technology = Disable
notes_plat_010= Hardware Prefetch = Enable, Adjacent Sector Prefetch = Enable
notes_plat_015= SnoopFilter = Disable
notes_os_000= 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run

################################################################
# About Fujitsu Siemens Computers
################################################################

default=default=default=default:
notes_035=
notes_040=For information about Fujitsu Siemens Computers in your country please see:
notes_045=http://www.fujitsu-siemens.com/countries

# Blank line at the end
notes_050=

################################################################
# Description Hardware and Software
################################################################

default=default=default=default:
hw_vendor = Fujitsu Siemens Computers
hw_model = CELSIUS R650, Intel Xeon X5460 processor
hw_cpu_name = Intel Xeon X5460
hw_cpu_char = 
hw_cpu_mhz = 3166
hw_fpu = Integrated
#
hw_nchips = 2
hw_ncores = 8
hw_ncoresperchip = 4
hw_nthreadspercore = 1
#
hw_ncpuorder = 1,2 chips
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 12 MB I+D on chip per chip, 6 MB shared / 2 cores
hw_tcache = None
hw_ocache = None
hw_memory = 8 GB (8x1 GB PC2-5300F, 2 rank, CL5-5-5, ECC)
hw_disk = SATA II 7200 rpm
hw_other = None

sw_file=ext3
sw_state=Multi-User, Run Level 3

license_num = 22
test_sponsor = Fujitsu Siemens Computers
tester = Fujitsu Siemens Computers
test_date = Nov-2007
hw_avail = Nov-2007
prepared_by = Fujitsu Siemens Computers
config =
# ---- End inclusion of '/work/cpu2006-v10/config/SUT.inc'

#
# These are listed as benchmark-tuning-extension-machine
#
default=default=default=default:
CC  = icc
CXX = icpc
FC=ifort
OBJ = .o
SMARTHEAP_DIR = /home/cmplr/usr3/alrahate/cpu2006.1.0/lib
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 32/64-bit

int=base=default:
sw_base_ptrsize = 32-bit

submit= MYMASK=`printf '0x%x' \$((1<<\$SPECCOPYNUM))`; taskset \$MYMASK $command

################################################################
#
# portability & libraries
#
#################### Portability Flags and Notes ############################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX

################################################################
# Tuning Flags
################################################################
# Base tuning default optimization
# Feedback directed optimization not allowed in baseline for CPU2006
# However there is no limit on the number of flags as long as the same 
# flags are used in the same order for all benchmarks of a given language
################################################################

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    -fast -vec-guard-write -parallel -par-runtime-control
CXXOPTIMIZE=  -xT -ipo -O3 -no-prec-div 

fp=base=default=default:
OPTIMIZE=    -fast -parallel 

################################################################
# Peak Tuning Flags int 2006 fast
################################################################
int=peak=default:
COPTIMIZE=       -fast -auto-ilp32 
CXXOPTIMIZE=     -xT -ipo -O3 -no-prec-div 
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  -prof-use

400.perlbench=peak=default:
COPTIMIZE= -fast -ansi-alias -prefetch

401.bzip2=peak=default:
CC= /home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070824/Linux64/bin/icc -L/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070824/Linux64/lib -I/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070824/Linux64/include
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -fast -prefetch -auto-ilp32

403.gcc=peak=default:
COPTIMIZE = -fast -inline-calloc -opt-malloc-options=3
feedback=0

429.mcf=peak=default:
COPTIMIZE= -fast -prefetch 
feedback=0

445.gobmk=peak=default:
COPTIMIZE= -xT -O2 -ipo -no-prec-div -ansi-alias

456.hmmer=peak=default:
CC= /home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070824/Linux64/bin/icc -L/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070824/Linux64/lib -I/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070824/Linux64/include
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -fast -unroll2 -ansi-alias -opt-multi-version-aggressive -auto-ilp32
feedback=0

458.sjeng=peak=default:
COPTIMIZE= -fast -unroll4

462.libquantum=peak=default:
COPTIMIZE= -fast -unroll4 -Ob0 -prefetch -opt-streaming-stores always -vec-guard-write -opt-malloc-options=3 -parallel -par-runtime-control
feedback=no

464.h264ref=peak=default:
COPTIMIZE= -fast -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE= -xT -O3 -ipo -no-prec-div -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
CXXOPTIMIZE= -xT -O3 -ipo -no-prec-div -ansi-alias -opt-ra-region-strategy=routine

483.xalancbmk=peak=default:
basepeak=yes

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default:
OPTIMIZE=    -fast
COPTIMIZE=   -auto-ilp32
CXXOPTIMIZE= -auto-ilp32
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  -prof-use

410.bwaves=peak=default:
OPTIMIZE=    -fast -prefetch -parallel
feedback=0

416.gamess=peak=default:
OPTIMIZE= -fast -unroll2 -Ob0 -ansi-alias -scalar-rep-

433.milc=peak=default:
OPTIMIZE= -fast -fno-alias

435.gromacs=peak=default:
OPTIMIZE=    -fast -prefetch

436.cactusADM=peak=default:
OPTIMIZE= -fast -unroll2 -prefetch -parallel

437.leslie3d=peak=default:
basepeak=yes

444.namd=peak=default:
CXXOPTIMIZE= -fast -fno-alias -auto-ilp32

447.dealII=peak=default:
CXXOPTIMIZE= -fast -unroll2 -ansi-alias -scalar-rep-

450.soplex=peak=default:
PORTABILITY =
CXX= /home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070824/Linux32/bin/icpc -L/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070824/Linux32/lib -I/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070824/Linux32/include
OPTIMIZE= -fast -opt-malloc-options=3
CXXOPTIMIZE=

453.povray=peak=default:
CXXOPTIMIZE= -fast -unroll4 -ansi-alias

454.calculix=peak=default:
OPTIMIZE= -fast -unroll-aggressive
feedback=0

459.GemsFDTD=peak=default:
OPTIMIZE= -fast -unroll2 -Ob0 -prefetch -parallel

465.tonto=peak=default:
OPTIMIZE= -fast -unroll4 -auto

470.lbm=peak=default:
PORTABILITY =
CC= /home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070824/Linux32/bin/icc -L/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070824/Linux32/lib -I/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070824/Linux32/include
COPTIMIZE= -unroll2 -scalar-rep- -prefetch -opt-malloc-options=3


481.wrf=peak=default:
OPTIMIZE= -fast -parallel -prefetch
feedback=0

482.sphinx3=peak=default:
PORTABILITY =
CC= /home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070824/Linux32/bin/icc -L/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070824/Linux32/lib -I/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070824/Linux32/include
COPTIMIZE= -unroll2
feedback=no

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
sw_avail         = Nov-2007
sw_os000         = SuSE Linux Enterprise Server 10 (x86_64)
sw_os001 = kernel 2.6.16.21-0.8-smp
sw_other         = binutils-2.17.tar.gz, Version 2.17

int=default=default=default:
sw_compiler001   = Intel C++ Compiler for Linux32 and Linux64 version 10.1
sw_compiler002   = Build 20070824
sw_auto_parallel = Yes

fp=default=default=default:
sw_compiler000   = Intel C++ and Fortran Compiler for Linux32 and
sw_compiler001 = Linux64 version 10.1
sw_compiler002   = Build 20070824
sw_auto_parallel = Yes