# Invocation command line:
# /home/accel/bin/runspec --reportable -c OpenMP.cfg --size=ref --iterations=3 openmp
# output_root was not used for this run
############################################################################
############################################################################
#
#      SPECACCEL config file for Intel CPU with Linux
#      Compiler name/version:       oneAPI/2024.0.0
#      Operating system version:    64-bit Linux
#      CPU:                         x86_64
#
####################################################################
# Tester information
####################################################################
license_num     = 6569
prepared_by     = Supermicro
tester          = Supermicro
test_sponsor    = Supermicro

######################################################################
# The header section of the config file.  Must appear
# before any instances of "default="
#
# ext = how the binaries you generated will be identified
# tune = specify "base" or "peak" or "all"
# the rest are default values

ext           = openmp
output_format = all
teeout        = yes
teerunout     = yes
tune          = all
makeflags      = -j 64
#output_root   = /local/home/<user>/SPECACCEL
env_vars = 1
flagsurl000 = /home/accel/config/flags/Intel-icc2021.2-linux64.20230726.xml
flagsurl001 = /home/accel/config/flags/Supermicro-Platform-Settings-V1.2-SPR-revF.xml

####################################################################
# HOST Hardware information
####################################################################
default=default=default=default:
hw_avail = Dec-2023
hw_cpu_name = Intel Xeon Platinum 8592+
hw_cpu_char = Intel Turbo Boost Technology up to 3.90 GHz
hw_cpu_mhz = 1900
hw_cpu_max_mhz = 3900
hw_fpu = Integrated
hw_nthreadspercore = 2
hw_ncoresperchip = 64
hw_ncores = 128
hw_nchips = 2
hw_ncpuorder = 2 chips
hw_pcache = 32 KB I + 48 KB D on chip per core
hw_scache = 2 MB I+D on chip per core
hw_tcache = 320 MB I+D on chip per chip
hw_ocache = None
hw_vendor = Supermicro
hw_model = GPU SuperServer SYS-741GE-TNRT
hw_memory000= 1 TB (16 x 64 GB 2Rx4 PC5-5600B-R)
hw_disk = 1 x 512 GB NVMe SSD
hw_other = None

####################################################################
# Accelerator Hardware information
####################################################################
hw_accel_model = Intel Xeon Platinum 8592+
hw_accel_vendor = Intel
hw_accel_name = Intel Xeon Platinum 8592+
hw_accel_type = CPU
hw_accel_connect = N/A
hw_accel_ecc = Yes
hw_accel_desc = 1 x Intel Xeon Platinum 8592+

####################################################################
# Software Hardware information
####################################################################
openmp=default=default=default:
sw_compiler000 = C/C++/Fortran: Version 2024.0.0.20231017 of Intel
sw_compiler001 = oneAPI DPC++/C++
sw_avail = Oct-2023
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 64-bit
sw_other = None
sw_parallel_other = No
sw_os000 = SUSE Linux Enterprise Server 15 SP5
sw_os001 = Kernel 5.14.21-150500.53-default
sw_file = xfs
sw_state = Run-level 3 (multi-user)
sw_accel_driver = N/A

default=default=default=default:
CC           = icx
CXX          = icpx
FC           = ifort
OPTIMIZE     += -qopenmp -Ofast -xCORE-AVX512 -qopt-zmm-usage=high -fimf-precision=low:exp,sin,cos,sincos,log -qopt-multiple-gather-scatter-by-shuffles

PORTABILITY = -DSPEC_USE_INNER_SIMD
ENV_KMP_LIBRARY=turnaround
ENV_KMP_BLOCKTIME=infinite
ENV_KMP_AFFINITY=compact,0
ENV_KMP_HW_SUBSET=1S,64C,2T
ENV_OMP_WAIT_POLICY=active
ENV_OMP_DYNAMIC=FALSE
ENV_OMP_NUM_THREADS=128
ENV_FORT_BUFFERED=true

559.pmniGhost=default=default=default:
FPORTABILITY=-nofor-main

503.postencil=peak=default=default:
ENV_OMP_NUM_THREADS=64
ENV_KMP_HW_SUBSET=1S,64C,1T

504.polbm=peak=default=default:
basepeak=yes

514.pomriq=peak=default=default:
basepeak=yes

550.pmd=peak=default=default:
OPTIMIZE += -fimf-precision=low -ip

551.ppalm=peak=default=default:
ENV_OMP_NUM_THREADS=64
ENV_KMP_HW_SUBSET=1S,64C,1T
OPTIMIZE += -I/opt/fftw-3.3.10/include
LIBS += -L/opt/fftw-3.3.10/lib -lfftw3
PORTABILITY+= -DSPEC_HOST_FFTW3
FPORTABILITY+= -DSPEC_HOST_FFTW3

553.pclvrleaf=peak=default=default:
ENV_OMP_NUM_THREADS=64
ENV_KMP_HW_SUBSET=1S,64C,1T

554.pcg=peak=default=default:
basepeak=yes

555.pseismic=peak=default=default:
basepeak=yes

556.psp=peak=default=default:
basepeak=yes

557.pcsp=peak=default=default:
basepeak=yes

559.pmniGhost=peak=default=default:
ENV_OMP_NUM_THREADS=64
ENV_KMP_HW_SUBSET=1S,64C,1T

560.pilbdc=peak=default=default:
ENV_OMP_NUM_THREADS=64
ENV_KMP_HW_SUBSET=1S,64C,1T

563.pswim=peak=default=default:
basepeak=yes

570.pbt=peak=default=default:
basepeak=yes


# The following settings were obtained by running 'specperl $[top]/Docs/sysinfo'
default:
notes_plat_sysinfo_000 = Sysinfo program /home/accel/Docs/sysinfo
notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
notes_plat_sysinfo_010 = running on 135-175-25 Tue Jan  9 11:25:44 2024
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_025 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_030 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 =    model name : INTEL(R) XEON(R) PLATINUM 8592+
notes_plat_sysinfo_050 =       1 "physical id"s (chips)
notes_plat_sysinfo_055 =       128 "processors"
notes_plat_sysinfo_060 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_065 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_070 =    caution.)
notes_plat_sysinfo_075 =       cpu cores : 64
notes_plat_sysinfo_080 =       siblings  : 128
notes_plat_sysinfo_085 =       physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
notes_plat_sysinfo_090 =       22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
notes_plat_sysinfo_095 =       47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
notes_plat_sysinfo_100 =    cache size : 327680 KB
notes_plat_sysinfo_105 =
notes_plat_sysinfo_110 = From /proc/meminfo
notes_plat_sysinfo_115 =    MemTotal:       528007580 kB
notes_plat_sysinfo_120 =    HugePages_Total:       0
notes_plat_sysinfo_125 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_130 =
notes_plat_sysinfo_135 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_140 =    os-release:
notes_plat_sysinfo_145 =       NAME="SLES"
notes_plat_sysinfo_150 =       VERSION="15-SP5"
notes_plat_sysinfo_155 =       VERSION_ID="15.5"
notes_plat_sysinfo_160 =       PRETTY_NAME="SUSE Linux Enterprise Server 15 SP5"
notes_plat_sysinfo_165 =       ID="sles"
notes_plat_sysinfo_170 =       ID_LIKE="suse"
notes_plat_sysinfo_175 =       ANSI_COLOR="0;32"
notes_plat_sysinfo_180 =       CPE_NAME="cpe:/o:suse:sles:15:sp5"
notes_plat_sysinfo_185 =
notes_plat_sysinfo_190 = uname -a:
notes_plat_sysinfo_195 =    Linux 135-175-25 5.14.21-150500.53-default #1 SMP PREEMPT_DYNAMIC Wed May 10
notes_plat_sysinfo_200 =    07:56:26 UTC 2023 (b630043) x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_205 =
notes_plat_sysinfo_210 = run-level 3 Dec 20 17:22
notes_plat_sysinfo_215 =
notes_plat_sysinfo_220 = SPEC is set to: /home/accel
notes_plat_sysinfo_225 =    Filesystem     Type  Size  Used Avail Use% Mounted on
notes_plat_sysinfo_230 =    /dev/sda2      xfs   221G   36G  186G  17% /
notes_plat_sysinfo_235 = Additional information from dmidecode:
notes_plat_sysinfo_240 =
notes_plat_sysinfo_245 =    Warning: Use caution when you interpret this section. The 'dmidecode' program
notes_plat_sysinfo_250 =    reads system data which is "intended to allow hardware to be accurately
notes_plat_sysinfo_255 =    determined", but the intent may not be met, as there are frequent changes to
notes_plat_sysinfo_260 =    hardware, firmware, and the "DMTF SMBIOS" standard.
notes_plat_sysinfo_265 =
notes_plat_sysinfo_270 =   BIOS American Megatrends International, LLC. 2.1 12/06/2023
notes_plat_sysinfo_275 =   Memory:
notes_plat_sysinfo_280 =    8x Micron Technology MTC40F2046S1RC56BD1 64 GB 2 rank 5600 MT/s
notes_plat_sysinfo_285 =
notes_plat_sysinfo_290 = (End of data from sysinfo program)
hw_cpu_name    = INTEL XEON PLATINUM 8592+
hw_disk        = 221 GB  add more disk info here
hw_memory001   = 503.547 GB fixme: If using DDR3, format is:
hw_memory002   = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)'
hw_nchips      = 1
prepared_by    = root  (is never output, only tags rawfile)
sw_file        = xfs
sw_os001       = NAME="SLES"
sw_os002       = 5.14.21-150500.53-default
sw_state       = Run level 3 (add definition here)


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = /home/accel/config/flags/Intel-icc2021.2-linux64.20230726.xml
flagsurl001 = /home/accel/config/flags/Supermicro-Platform-Settings-V1.2-SPR-revF.xml
hw_cpu_name = INTEL XEON PLATINUM 8592+
hw_cpu_char = Intel Turbo Boost Technology up to 3.90 GHz
hw_cpu_mhz = 1900
hw_cpu_max_mhz = 3900
hw_fpu = Integrated
hw_ncpuorder = 1 chip
hw_pcache = 32 KB I + 48 KB D on chip per core
hw_scache = 2 MB I+D on chip per core
hw_tcache = 320 MB I+D on chip per chip
hw_ocache = None
hw_memory = 512 GB (8 x 64 GB 2Rx4 PC5-5600B-R)
hw_disk = 1 x 240 GB SATA III SSD
hw_other = None
hw_accel_model = Intel Xeon Platinum 8592+
hw_accel_vendor = Intel
hw_accel_name = Intel Xeon Platinum 8592+
hw_accel_type = CPU
hw_accel_connect = N/A
hw_accel_ecc = Yes
hw_accel_desc = 1 x Intel Xeon Platinum 8592+
sw_accel_driver = N/A
sw_file = xfs
sw_state = Run-level 3 (multi-user)
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 64-bit
sw_other = None
test_sponsor = Supermicro
license_num = 6569
tester = Supermicro
hw_avail = Dec-2023
sw_avail = Oct-2023
prepared_by = Supermicro
hw_vendor = Supermicro
hw_model = UP SuperServer SYS-521C-NR
sw_parallel_other = No
hw_nthreadspercore = 2
hw_ncoresperchip = 64
hw_ncores = 64
hw_nchips = 1
sw_compiler000 = C/C++/Fortran: Version 2024.0.0.20231017 of Intel
sw_compiler001 = oneAPI DPC++/C++
sw_os000 = SUSE Linux Enterprise Server 15 SP5
sw_os001 = Kernel 5.14.21-150500.53-default
notes_plat_sysinfo_000 = Sysinfo program /home/accel/Docs/sysinfo
notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
notes_plat_sysinfo_010 = running on 135-175-25 Tue Jan  9 11:25:44 2024
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_025 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_030 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 =    model name : INTEL(R) XEON(R) PLATINUM 8592+
notes_plat_sysinfo_050 =       1 "physical id"s (chips)
notes_plat_sysinfo_055 =       128 "processors"
notes_plat_sysinfo_060 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_065 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_070 =    caution.)
notes_plat_sysinfo_075 =       cpu cores : 64
notes_plat_sysinfo_080 =       siblings  : 128
notes_plat_sysinfo_085 =       physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
notes_plat_sysinfo_090 =       22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
notes_plat_sysinfo_095 =       47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
notes_plat_sysinfo_100 =    cache size : 327680 KB
notes_plat_sysinfo_105 =
notes_plat_sysinfo_110 = From /proc/meminfo
notes_plat_sysinfo_115 =    MemTotal:       528007580 kB
notes_plat_sysinfo_120 =    HugePages_Total:       0
notes_plat_sysinfo_125 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_130 =
notes_plat_sysinfo_135 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_140 =    os-release:
notes_plat_sysinfo_145 =       NAME="SLES"
notes_plat_sysinfo_150 =       VERSION="15-SP5"
notes_plat_sysinfo_155 =       VERSION_ID="15.5"
notes_plat_sysinfo_160 =       PRETTY_NAME="SUSE Linux Enterprise Server 15 SP5"
notes_plat_sysinfo_165 =       ID="sles"
notes_plat_sysinfo_170 =       ID_LIKE="suse"
notes_plat_sysinfo_175 =       ANSI_COLOR="0;32"
notes_plat_sysinfo_180 =       CPE_NAME="cpe:/o:suse:sles:15:sp5"
notes_plat_sysinfo_185 =
notes_plat_sysinfo_190 = uname -a:
notes_plat_sysinfo_195 =    Linux 135-175-25 5.14.21-150500.53-default #1 SMP PREEMPT_DYNAMIC Wed May 10
notes_plat_sysinfo_200 =    07:56:26 UTC 2023 (b630043) x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_205 =
notes_plat_sysinfo_210 = run-level 3 Dec 20 17:22
notes_plat_sysinfo_215 =
notes_plat_sysinfo_220 = SPEC is set to: /home/accel
notes_plat_sysinfo_225 =    Filesystem     Type  Size  Used Avail Use% Mounted on
notes_plat_sysinfo_230 =    /dev/sda2      xfs   221G   36G  186G  17% /
notes_plat_sysinfo_235 = Additional information from dmidecode:
notes_plat_sysinfo_240 =
notes_plat_sysinfo_245 =    Warning: Use caution when you interpret this section. The 'dmidecode' program
notes_plat_sysinfo_250 =    reads system data which is "intended to allow hardware to be accurately
notes_plat_sysinfo_255 =    determined", but the intent may not be met, as there are frequent changes to
notes_plat_sysinfo_260 =    hardware, firmware, and the "DMTF SMBIOS" standard.
notes_plat_sysinfo_265 =
notes_plat_sysinfo_270 =   BIOS American Megatrends International, LLC. 2.1 12/06/2023
notes_plat_sysinfo_275 =   Memory:
notes_plat_sysinfo_280 =    8x Micron Technology MTC40F2046S1RC56BD1 64 GB 2 rank 5600 MT/s
notes_plat_sysinfo_285 =
notes_plat_sysinfo_290 = (End of data from sysinfo program)
notes_000 ==========================================================================
notes_005 =BIOS Setting:
notes_010 =  Power Performance Tuning = BIOS Controls EPB
notes_015 =  ENERGY_PERF_BIAS_CFG Mode = Performance
notes_020 =  SNC (Sub NUMA) = Enable SNC2 (2-clusters)
notes_025 =  KTI Prefetch = Enable
notes_030 =  DCU Streamer Prefetcher = Disable
notes_035 =  LLC Dead Line Alloc = Disable
notes_040 =  Stale AtoS = Disable
notes_045 ==========================================================================
notes_050 =Spectre and Meltdown
notes_055 =  NA: The test sponsor attests, as of date of publication, the CVE-2017-5754 (Meltdown)
notes_060 =  is mitigated in the system as tested and documented.
notes_065 =  Yes: The test sponsor attests, as of date of publication, the CVE-2017-5753 (Spectre variant 1)
notes_070 =  is mitigated in the system as tested and documented.
notes_075 =  Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
notes_080 =  is mitigated in the system as tested and documented.
notes_085 ==========================================================================
notes_090 =OS tunning:
notes_095 =  Stack size set to unlimited using "ulimit -s unlimited"
notes_100 ==========================================================================
notes_105 =IPMI setting:
notes_110 =  Fan Mode: Full Speed
notes_115 =

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000 = https://www.spec.org/accel/flags/Intel-icc2021.2-linux64.20230726.xml
flagsurl001 = https://www.spec.org/accel/flags/Supermicro-Platform-Settings-V1.2-SPR-revF.xml
hw_cpu_name = Intel Xeon Platinum 8592+
hw_cpu_char = Intel Turbo Boost Technology up to 3.90 GHz
hw_cpu_mhz = 1900
hw_cpu_max_mhz = 3900
hw_fpu = Integrated
hw_ncpuorder = 1 chip
hw_pcache = 32 KB I + 48 KB D on chip per core
hw_scache = 2 MB I+D on chip per core
hw_tcache = 320 MB I+D on chip per chip
hw_ocache = None
hw_memory = 512 GB (8 x 64 GB 2Rx4 PC5-5600B-R)
hw_disk = 1 x 240 GB SATA III SSD
hw_other = None
hw_accel_model = Intel Xeon Platinum 8592+
hw_accel_vendor = Intel
hw_accel_name = Intel Xeon Platinum 8592+
hw_accel_type = CPU
hw_accel_connect = N/A
hw_accel_ecc = Yes
hw_accel_desc = 1 x Intel Xeon Platinum 8592+
sw_accel_driver = N/A
sw_file = xfs
sw_state = Run-level 3 (multi-user)
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 64-bit
sw_other = None
test_sponsor = Supermicro
license_num = 6569
tester = Supermicro
hw_avail = Dec-2023
sw_avail = Oct-2023
prepared_by = Supermicro
hw_vendor = Supermicro
hw_model = UP SuperServer SYS-521C-NR
sw_parallel_other = No
hw_nthreadspercore = 2
hw_ncoresperchip = 64
hw_ncores = 64
hw_nchips = 1
sw_compiler000 = C/C++/Fortran: Version 2024.0.0.20231017 of Intel
sw_compiler001 = oneAPI DPC++/C++
sw_os000 = SUSE Linux Enterprise Server 15 SP5
sw_os001 = Kernel 5.14.21-150500.53-default
notes_plat_sysinfo_000 = Sysinfo program /home/accel/Docs/sysinfo
notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
notes_plat_sysinfo_010 = running on 135-175-25 Tue Jan  9 11:25:44 2024
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_025 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_030 =   http://www.spec.org/accel/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 =    model name : INTEL(R) XEON(R) PLATINUM 8592+
notes_plat_sysinfo_050 =       1 "physical id"s (chips)
notes_plat_sysinfo_055 =       128 "processors"
notes_plat_sysinfo_060 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_065 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_070 =    caution.)
notes_plat_sysinfo_075 =       cpu cores : 64
notes_plat_sysinfo_080 =       siblings  : 128
notes_plat_sysinfo_085 =       physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
notes_plat_sysinfo_090 =       22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
notes_plat_sysinfo_095 =       47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
notes_plat_sysinfo_100 =    cache size : 327680 KB
notes_plat_sysinfo_105 =
notes_plat_sysinfo_110 = From /proc/meminfo
notes_plat_sysinfo_115 =    MemTotal:       528007580 kB
notes_plat_sysinfo_120 =    HugePages_Total:       0
notes_plat_sysinfo_125 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_130 =
notes_plat_sysinfo_135 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_140 =    os-release:
notes_plat_sysinfo_145 =       NAME="SLES"
notes_plat_sysinfo_150 =       VERSION="15-SP5"
notes_plat_sysinfo_155 =       VERSION_ID="15.5"
notes_plat_sysinfo_160 =       PRETTY_NAME="SUSE Linux Enterprise Server 15 SP5"
notes_plat_sysinfo_165 =       ID="sles"
notes_plat_sysinfo_170 =       ID_LIKE="suse"
notes_plat_sysinfo_175 =       ANSI_COLOR="0;32"
notes_plat_sysinfo_180 =       CPE_NAME="cpe:/o:suse:sles:15:sp5"
notes_plat_sysinfo_185 =
notes_plat_sysinfo_190 = uname -a:
notes_plat_sysinfo_195 =    Linux 135-175-25 5.14.21-150500.53-default #1 SMP PREEMPT_DYNAMIC Wed May 10
notes_plat_sysinfo_200 =    07:56:26 UTC 2023 (b630043) x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_205 =
notes_plat_sysinfo_210 = run-level 3 Dec 20 17:22
notes_plat_sysinfo_215 =
notes_plat_sysinfo_220 = SPEC is set to: /home/accel
notes_plat_sysinfo_225 =    Filesystem     Type  Size  Used Avail Use% Mounted on
notes_plat_sysinfo_230 =    /dev/sda2      xfs   221G   36G  186G  17% /
notes_plat_sysinfo_235 = Additional information from dmidecode:
notes_plat_sysinfo_240 =
notes_plat_sysinfo_245 =    Warning: Use caution when you interpret this section. The 'dmidecode' program
notes_plat_sysinfo_250 =    reads system data which is "intended to allow hardware to be accurately
notes_plat_sysinfo_255 =    determined", but the intent may not be met, as there are frequent changes to
notes_plat_sysinfo_260 =    hardware, firmware, and the "DMTF SMBIOS" standard.
notes_plat_sysinfo_265 =
notes_plat_sysinfo_270 =   BIOS American Megatrends International, LLC. 2.1 12/06/2023
notes_plat_sysinfo_275 =   Memory:
notes_plat_sysinfo_280 =    8x Micron Technology MTC40F2046S1RC56BD1 64 GB 2 rank 5600 MT/s
notes_plat_sysinfo_285 =
notes_plat_sysinfo_290 = (End of data from sysinfo program)
notes_000 ==========================================================================
notes_005 =BIOS Setting:
notes_010 =  Power Performance Tuning = BIOS Controls EPB
notes_015 =  ENERGY_PERF_BIAS_CFG Mode = Performance
notes_020 =  SNC (Sub NUMA) = Enable SNC2 (2-clusters)
notes_025 =  KTI Prefetch = Enable
notes_030 =  DCU Streamer Prefetcher = Disable
notes_035 =  LLC Dead Line Alloc = Disable
notes_040 =  Stale AtoS = Disable
notes_045 ==========================================================================
notes_050 =Spectre and Meltdown
notes_055 =  NA: The test sponsor attests, as of date of publication, the CVE-2017-5754 (Meltdown)
notes_060 =  is mitigated in the system as tested and documented.
notes_065 =  Yes: The test sponsor attests, as of date of publication, the CVE-2017-5753 (Spectre variant 1)
notes_070 =  is mitigated in the system as tested and documented.
notes_075 =  Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
notes_080 =  is mitigated in the system as tested and documented.
notes_085 ==========================================================================
notes_090 =OS tunning:
notes_095 =  Stack size set to unlimited using "ulimit -s unlimited"
notes_100 ==========================================================================
notes_105 =IPMI setting:
notes_110 =  Fan Mode: Full Speed
notes_115 =