# Invocation command line: # /local/home/aglobus/spec-accel2017/bin/runspec -c pgi_omp -T base --reportable openacc # output_root was not used for this run ############################################################################ # Invocation command line: # /local/home/SPECACCEL/bin/runspec -c tesla-pgi142 --reportable -T base,peak -i test,train,ref openacc # output_root was not used for this run ############################################################################ #################################################################### # Tester information #################################################################### # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 license_num = 019 #prepared_by = Mathew Colgrove (mathew.colgrove@pgroup.com) tester = NVIDIA Corporation test_sponsor = NVIDIA Corporation ###################################################################### # The header section of the config file. Must appear # before any instances of "default=" # # ext = how the binaries you generated will be identified # tune = specify "base" or "peak" or "all" ext = pgi output_format = asc teeout = yes teerunout = yes tune = base,peak preENV_HUGETLB_PATH=/mnt/hugetlb preENV_OMP_PROC_BIND=true preENV_OMP_PLACES={0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79} preENV_KMP_AFFINITY=granularity=fine,compact,1,0 preENV_ACC_NUM_CORES=80 preENV_HUGETLB_PATH=/mnt/hugetlb #################################################################### # HOST Hardware information #################################################################### default=default=default=default: hw_avail = Dec-2013 #hw_cpu_name = Intel Core i7-3930K hw_cpu_mhz = 3200 hw_cpu_max_mhz = 3800 hw_fpu = Integrated #hw_nchips = 1 hw_ncores = 6 hw_ncoresperchip = 6 hw_nthreadspercore = 2 hw_ncpuorder = 1 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 12 MB I+D on chip per chip hw_ocache = None hw_vendor = ASUS hw_model = ASUS P9X79 Motherboard sw_parallel_other = No hw_temperature_10201011948889_vendor = Digi hw_temperature_10201011948889_setup = Position 5mm above intake fan hw_temperature_10201011948889_serial = WS34682143 hw_temperature_10201011948889_connection = USB hw_power_10201011948888_vendor = Xitron Technologies, Inc. hw_power_10201011948888_serial = 28011109005 hw_power_10201011948888_met_inst = NIST hw_power_10201011948888_connection = RS232 via USB-adapter hw_power_10201011948888_cal_org = Micro Precision Calibration, Inc. hw_power_10201011948888_cal_label = 220081222038459 hw_power_10201011948888_cal_date = 02.20.2014 hw_temperature_10201011948889_model = DigiWATCHPORT_H hw_temperature_10201011948889_label = Temperature Meter hw_power_10201011948888_model = 2801 hw_power_10201011948888_label = Power Analyzer #hw_disk = 99x SCSI, 999 GB, 999 RPM hw_memory000 = 8 GB (2 x 4 GB, PC3-14900R-9, running at 1600 MHz) hw_other = None #################################################################### # Accelerator Hardware information #################################################################### hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes #################################################################### # Power and temperature meter configuration #################################################################### power = no power_analyzer = 10.20.101.194:8888 temp_meter = 10.20.101.194:8889 mean_anyway = 1 voltage_range = auto idle_current_range = auto current_range = auto #################################################################### # Software information #################################################################### default=default=default=default: sw_avail = Feb-2018 sw_compiler = PGI Professional Edition, Release 18.1 LLVM sw_accel_driver = Not applicable CC = pgcc CXX = pgc++ FC = pgfortran openacc=default=default=default: sw_other = hw_psu = 1200 W hw_psu_info = Thermaltake SMART M1200W opencl=default=default=default: sw_other = CUDA 7.5 SDK openmp=base=default=default: PORTABILITY = -DSPEC_USE_INNER_SIMD OPTIMIZE = -fast -mp -Mnouniform -Mhugetlb FOPTIMIZE = COPTIMIZE = openacc=base=default=default: OPTIMIZE = -fast -Mnouniform -Mhugetlb FOPTIMIZE = -acc -ta=multicore COPTIMIZE = -acc -ta=multicore openacc=peak=default=default: OPTIMIZE = -fast -Mfprelaxed FOPTIMIZE = -acc -ta=tesla:cc35,cuda7.5 COPTIMIZE = -acc -ta=tesla:cc35,cuda7.5 opencl=default=default=default: CPORTABILITY = -I/opt/cuda-7.5/include/ -lOpenCL CXXPORTABILITY = -I/opt/cuda-7.5/include/ -lOpenCL opencl=base=default=default: OPTIMIZE = -fast -Mfprelaxed opencl=peak=default=default: OPTIMIZE = -fast -Mfprelaxed 101.tpacf=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=1024 104.lbm=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=32 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_1=1 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_2=1 112.spmv=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=96 117.bfs=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=64 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_0=64 118.cutcp=default=default=default: CPORTABILITY += -D__GNUC__ 120.kmeans=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=288 122.cfd=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_3_0=288 125.lud=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=32 126.ge=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=512 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_0=1 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_1=512 351.palm=peak=default=default: PORTABILITY = -DSPEC_HOST_FFTW3 FOPTIMIZE = -acc=noautopar -ta=tesla:cc35,cuda7.5,fastmath -I$(SPEC)/fftw333/include LIBS = -L$(SPEC)/fftw333/lib -lfftw3 551.ppalm=default=default=default: srcalt=advec_ws_private 359.miniGhost=peak=default=default: FOPTIMIZE = -acc -ta=tesla:cc35,cuda7.5,maxregcount:32 COPTIMIZE = -acc -ta=tesla:cc35,cuda7.5,maxregcount:32 359.miniGhost,559.pmniGhost=default=default=default: EXTRA_LDFLAGS += -Mnomain 363.swim=peak=default=default: FOPTIMIZE = -acc -ta=tesla:cc35,cuda7.5,pin # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2698 v4 hw_disk = 443 GB add more disk info here hw_memory001 = 251.803 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_nchips = 2 prepared_by = aglobus (is never output, only tags rawfile) sw_file = xfs sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 sw_state = Run level 3 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: sw_peak_ptrsize = Not Applicable notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_025 =OMP_PROC_BIND = "true" notes_030 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 3200 hw_cpu_max_mhz = 3800 hw_fpu = Integrated hw_ncpuorder = 1 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 12 MB I+D on chip per chip hw_ocache = None hw_disk = 443 GB add more disk info here hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.1 LLVM sw_file = xfs sw_state = Run level 3 (add definition here) sw_peak_ptrsize = Not Applicable test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Dec-2013 sw_avail = Feb-2018 prepared_by = aglobus (is never output, only tags rawfile) hw_vendor = ASUS hw_model = ASUS P9X79 Motherboard sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 6 hw_ncores = 6 hw_nchips = 2 hw_memory000 = 8 GB (2 x 4 GB, PC3-14900R-9, running at 1600 MHz) hw_memory001 = 251.803 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_025 =OMP_PROC_BIND = "true" notes_030 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 2200 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_disk = 480GB Intel SSD DC S3520 hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes hw_accel_desc = Intel Xeon CPU E5-2698 v4 sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Feb-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SYS-1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 2 hw_ncores = 40 hw_nchips = 2 hw_memory000 = 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_025 =OMP_PROC_BIND = "true" notes_030 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 2200 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_disk = 480GB Intel SSD DC S3520 hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes hw_accel_desc = Intel Xeon CPU E5-2698 v4 sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Feb-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SYS-1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 2 hw_ncores = 40 hw_nchips = 2 hw_memory000 = 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_025 =OMP_PROC_BIND = "true" notes_030 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 2200 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_disk = 480GB Intel SSD DC S3520 hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes hw_accel_desc = Intel Xeon CPU E5-2698 v4 sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Feb-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SYS-1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 2 hw_ncores = 40 hw_nchips = 2 hw_memory000 = 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_025 =OMP_PROC_BIND = "true" notes_030 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 2200 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_disk = 480GB Intel SSD DC S3520 hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes hw_accel_desc = Intel Xeon CPU E5-2698 v4 sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Feb-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SYS-1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 2 hw_ncores = 40 hw_nchips = 2 hw_memory000 = 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_025 =OMP_PROC_BIND = "true" notes_030 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 2200 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_disk = 480GB Intel SSD DC S3520 hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes hw_accel_desc = Intel Xeon CPU E5-2698 v4 sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Feb-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SYS-1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 2 hw_ncores = 40 hw_nchips = 2 hw_memory000 = 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_025 =OMP_PROC_BIND = "true" notes_030 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 2200 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_disk = 480GB Intel SSD DC S3520 hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes hw_accel_desc = Intel Xeon CPU E5-2698 v4 sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Feb-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SYS-1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 2 hw_ncores = 40 hw_nchips = 2 hw_memory000 = 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_025 =OMP_PROC_BIND = "true" notes_030 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml flagsurl001 = ../../../flags/pgi2018_platform.xml hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 2200 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_disk = 480GB Intel SSD DC S3520 hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes hw_accel_desc = Intel Xeon CPU E5-2698 v4 sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Feb-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SYS-1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 2 hw_ncores = 40 hw_nchips = 2 hw_memory000 = 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_025 =OMP_PROC_BIND = "true" notes_030 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml flagsurl001 = ../../../flags/pgi2018_platform.xml hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 2200 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_disk = 480GB Intel SSD DC S3520 hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes hw_accel_desc = Intel Xeon CPU E5-2698 v4 sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Feb-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SYS-1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 2 hw_ncores = 40 hw_nchips = 2 hw_memory000 = 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_025 =OMP_PROC_BIND = "true" notes_030 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml flagsurl001 = ../../../flags/pgi2018_platform.xml hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 2200 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_disk = 480GB Intel SSD DC S3520 hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes hw_accel_desc = Intel Xeon CPU E5-2698 v4 sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Feb-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SYS-1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 2 hw_ncores = 40 hw_nchips = 2 hw_memory000 = 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_025 =OMP_PROC_BIND = "true" notes_030 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml flagsurl001 = ../../../flags/pgi2018_platform.xml hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 2200 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_disk = 480GB Intel SSD DC S3520 hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes hw_accel_desc = Intel Xeon CPU E5-2698 v4 sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Feb-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SYS-1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 2 hw_ncores = 40 hw_nchips = 2 hw_memory000 = 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_025 =OMP_PROC_BIND = "true" notes_030 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml flagsurl001 = ../../../flags/pgi2018_platform.xml hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 2200 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_disk = 480GB Intel SSD DC S3520 hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes hw_accel_desc = Intel Xeon CPU E5-2698 v4 sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Feb-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SYS-1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 2 hw_ncores = 40 hw_nchips = 2 hw_memory000 = 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_025 =OMP_PROC_BIND = "true" notes_030 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 2200 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_disk = 480GB Intel SSD DC S3520 hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes hw_accel_desc = Intel Xeon CPU E5-2698 v4 sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Feb-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SYS-1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 2 hw_ncores = 40 hw_nchips = 2 hw_memory000 = 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20},{21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41},{42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62},{63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_025 =OMP_PROC_BIND = "true" notes_030 = notes_035 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_040 =is mitigated in the system as tested and documented. notes_045 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_050 =is mitigated in the system as tested and documented. notes_055 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_060 =is mitigated in the system as tested and documented. # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = ../../../flags/pgi2018_flags.xml hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 2200 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_disk = 480GB Intel SSD DC S3520 hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes hw_accel_desc = Intel Xeon CPU E5-2698 v4 sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Aug-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SYS-1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 2 hw_ncores = 40 hw_nchips = 2 hw_memory000 = 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20}, notes_025 = {21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41}, notes_030 = {42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62}, notes_035 = {63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_040 =OMP_PROC_BIND = "true" notes_045 = notes_050 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_055 =is mitigated in the system as tested and documented. notes_060 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_065 =is mitigated in the system as tested and documented. notes_070 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_075 =is mitigated in the system as tested and documented. # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /proj/apps/SPECHPG/SPECACCEL/flags/pgi2018_platform.xml flagsurl001 = /proj/apps/SPECHPG/SPECACCEL/flags/pgi2018_flags.xml hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 2200 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_disk = 480GB Intel SSD DC S3520 hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes hw_accel_desc = Intel Xeon CPU E5-2698 v4 sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Aug-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SuperServer 1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 20 hw_ncores = 40 hw_nchips = 2 hw_memory000 = 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20}, notes_025 = {21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41}, notes_030 = {42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62}, notes_035 = {63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_040 =OMP_PROC_BIND = "true" notes_045 = notes_050 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_055 =is mitigated in the system as tested and documented. notes_060 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_065 =is mitigated in the system as tested and documented. notes_070 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_075 =is mitigated in the system as tested and documented. # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = https://www.spec.org/accel/flags/PGI-Platform-Multicore-OMP.xml flagsurl001 = https://www.spec.org/accel/flags/pgi2018_flags.xml hw_cpu_name = Intel Xeon E5-2698 v4 hw_cpu_mhz = 2200 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 50 MB I+D on chip per chip hw_ocache = None hw_disk = 480GB Intel SSD DC S3520 hw_other = None hw_accel_model = Intel Xeon CPU E5-2698 v4 hw_accel_vendor = Intel Corporation hw_accel_name = Xeon E5-2698 v4 hw_accel_type = CPU hw_accel_connect = Not applicable hw_accel_ecc = Yes hw_accel_desc = Intel Xeon CPU E5-2698 v4 sw_accel_driver = Not applicable sw_compiler = PGI Professional Edition, Release 18.7 LLVM sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Jul-2017 sw_avail = Aug-2018 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SuperServer 1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 20 hw_ncores = 40 hw_nchips = 2 hw_memory000 = 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R) sw_os000 = CentOS Linux release 7.4.1708 (Core) sw_os001 = 3.10.0-693.11.6.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/aglobus/spec-accel2017/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on perf-bdw3 Wed Aug 1 17:08:56 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v4 @ 2.20GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 80 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 20 notes_plat_sysinfo_080 = siblings : 40 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 16 17 18 19 20 24 25 26 27 28 notes_plat_sysinfo_095 = cache size : 51200 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264034224 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.4 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.4.1708 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux perf-bdw3 3.10.0-693.11.6.el7.x86_64 #1 SMP Thu Jan 4 01:06:37 UTC 2018 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 21 06:36 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/aglobus/spec-accel2017 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos_bdw3-root xfs 443G 58G 385G 13% / notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_000 =Environment variables set by runspec before the start of the run: notes_005 =ACC_NUM_CORES = "80" notes_010 =HUGETLB_PATH = "/mnt/hugetlb" notes_015 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_020 =OMP_PLACES = "{0},{1},{2},{3},{4},{5},{6},{7},{8},{9},{10},{11},{12},{13},{14},{15},{16},{17},{18},{19},{20}, notes_025 = {21},{22},{23},{24},{25},{26},{27},{28},{29},{30},{31},{32},{33},{34},{35},{36},{37},{38},{39},{40},{41}, notes_030 = {42},{43},{44},{45},{46},{47},{48},{49},{50},{51},{52},{53},{54},{55},{56},{57},{58},{59},{60},{61},{62}, notes_035 = {63},{64},{65},{66},{67},{68},{69},{70},{71},{72},{73},{74},{75},{76},{77},{78},{79}" notes_040 =OMP_PROC_BIND = "true" notes_045 = notes_050 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_055 =is mitigated in the system as tested and documented. notes_060 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_065 =is mitigated in the system as tested and documented. notes_070 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_075 =is mitigated in the system as tested and documented.