# Invocation command line: # /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/bin/runspec --reportable --config KNL.cfg --tune base,peak --flagsurl=config/flags/Intel-icc18.0-linux64.xml openmp --rebuild # output_root was not used for this run ############################################################################ # Invocation command line: # runspec --reportable --config KNL.cfg --tune base,peak --flagsurl=config/flags/Intel-icc18.0-linux64.xml openmp --rebuild # output_root was not used for this run ############################################################################ VENDOR = intel action = validate PATHSEP = / check_md5 = 1 env_vars = 1 level = 40 output_format = asc backup_config = 0 default=default=default=default: CC = icc FC = ifort CXX = icpc OBJ = .o submit = numactl -m 1 $command default=default=default=default: OPTIMIZE = -O3 -xMIC-AVX512 -qopenmp -qopenmp-offload=host -fimf-precision=low:sqrt,exp,log,/ PORTABILITY = -DSPEC_USE_INNER_SIMD FPORTABILITY = -DSPEC_USE_INNER_SIMD ENV_KMP_AFFINITY=compact,0 ENV_FORT_BUFFERED=true ENV_OMP_NUM_THREADS=136 ENV_KMP_HW_SUBSET=68C,2T 550.pmd=default=default=default: FPORTABILITY = -80 559.pmniGhost=default=default=default: FPORTABILITY=-nofor-main 503.postencil=peak=default=default: basepeak=yes 504.polbm=peak=default=default: OPTIMIZE += -qopt-prefetch=5 514.pomriq=peak=default=default: ENV_OMP_NUM_THREADS=272 ENV_KMP_HW_SUBSET=68C,4T OPTIMIZE += -qopt-prefetch=5 -no-prec-sqrt 550.pmd=peak=default=default: ENV_OMP_NUM_THREADS=272 ENV_KMP_HW_SUBSET=68C,4T OPTIMIZE += -fimf-precision=low 551.ppalm=peak=default=default: ENV_OMP_NUM_THREADS=68 ENV_KMP_HW_SUBSET=68C,1T OPTIMIZE = -O3 -xMIC-AVX512 -qopenmp -qopenmp-offload=host -no-prec-sqrt -I/home/abobyr/FFTW-3.3.6/include LIBS= -L/home/abobyr/FFTW-3.3.6/lib -lfftw3 PORTABILITY+= -DSPEC_HOST_FFTW3 FPORTABILITY+= -DSPEC_HOST_FFTW3 552.pep=peak=default=default: ENV_OMP_NUM_THREADS=272 ENV_KMP_HW_SUBSET=68C,4T OPTIMIZE += -qopt-streaming-stores always 553.pclvrleaf=peak=default=default: basepeak=yes 554.pcg=peak=default=default: ENV_OMP_NUM_THREADS=68 ENV_KMP_HW_SUBSET=68C,1T OPTIMIZE += -qopt-prefetch=5 555.pseismic=peak=default=default: ENV_OMP_NUM_THREADS=68 ENV_KMP_HW_SUBSET=68C,1T 556.psp=peak=default=default: ENV_OMP_NUM_THREADS=68 ENV_KMP_HW_SUBSET=68C,1T OPTIMIZE += -qopt-prefetch=2 557.pcsp=peak=default=default: ENV_OMP_NUM_THREADS=68 ENV_KMP_HW_SUBSET=68C,1T OPTIMIZE += -qopt-prefetch=5 559.pmniGhost=peak=default=default: ENV_OMP_NUM_THREADS=136 ENV_KMP_HW_SUBSET=68C,2T OPTIMIZE += -qopt-prefetch=3 -qopt-streaming-stores always 560.pilbdc=peak=default=default: ENV_OMP_NUM_THREADS=68 ENV_KMP_HW_SUBSET=68C,1T OPTIMIZE += -qopt-prefetch=5 563.pswim=peak=default=default: ENV_OMP_NUM_THREADS=68 ENV_KMP_HW_SUBSET=68C,1T OPTIMIZE += -qopt-streaming-stores always 570.pbt=peak=default=default: ENV_OMP_NUM_THREADS=68 ENV_KMP_HW_SUBSET=68C,1T default=default=default=default: hw_cpu_name = Intel(R) Xeon Phi(TM) CPU 7250F hw_cpu_char = Simultaneous multithreading (SMT) ON, Turbo ON hw_cpu_mhz = 1400 hw_cpu_max_mhz = 1600 hw_model000 = Intel(R) Xeon Phi(TM) CPU 7250F, 1.40 GHz, hw_model001 = SMT ON, Turbo ON, flat MCDRAM hw_memory000 = 96 GB (6 x 16 GB 2Rx8 PC4-2400T-REB-11, ECC) hw_memory001 = + 16 GB MCDRAM hw_fpu = Integrated hw_nchips = 1 hw_ncores = 68 hw_ncoresperchip = 68 hw_nthreadspercore = 4 hw_ncpuorder = 1 to 1 chip hw_vendor = Intel hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per 2 cores hw_tcache = None hw_ocache = None hw_disk = Panasas File System hw_accel_model = Intel(R) Xeon Phi(TM) CPU 7250F hw_accel_vendor = Intel hw_accel_name = Intel(R) Xeon Phi(TM) CPU 7250F hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes hw_accel_desc = Second generation Xeon Phi self-bootable CPU sw_accel_driver = None hw_other = None sw_other=None sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os001 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1 sw_base_ptrsize=64-bit sw_peak_ptrsize=64-bit sw_compiler = C/C++/Fortran: Version 18.0 sw_file=panfs sw_state=Default sw_other=FFTW 3.3.6 sw_parallel_other=No company_name=Intel Corporation machine_name=Endeavour license_num=13 test_sponsor = Intel tester = Intel hw_avail=Dec-2016 sw_avail=Sep-2017 prepared_by=Alexander Bobyr # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo -f' notes_plat_sysinfo_000 = Sysinfo program Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on ekf106 Fri Jun 30 11:32:28 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon Phi(TM) CPU 7250F @ 1.40GHz notes_plat_sysinfo_050 = 1 "physical id"s (chips) notes_plat_sysinfo_055 = 272 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 68 notes_plat_sysinfo_080 = siblings : 272 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 notes_plat_sysinfo_090 = 24 25 26 27 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 notes_plat_sysinfo_095 = 51 52 53 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 notes_plat_sysinfo_100 = cache size : 1024 KB notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From /proc/meminfo notes_plat_sysinfo_115 = MemTotal: 115390452 kB notes_plat_sysinfo_120 = HugePages_Total: 0 notes_plat_sysinfo_125 = Hugepagesize: 2048 kB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /etc/*release* /etc/*version* notes_plat_sysinfo_140 = oracle-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_145 = os-release: notes_plat_sysinfo_150 = NAME="Oracle Linux Server" notes_plat_sysinfo_155 = VERSION="7.3" notes_plat_sysinfo_160 = ID="ol" notes_plat_sysinfo_165 = VERSION_ID="7.3" notes_plat_sysinfo_170 = PRETTY_NAME="Oracle Linux Server 7.3" notes_plat_sysinfo_175 = ANSI_COLOR="0;31" notes_plat_sysinfo_180 = CPE_NAME="cpe:/o:oracle:linux:7:3:server" notes_plat_sysinfo_185 = HOME_URL="https://linux.oracle.com/" notes_plat_sysinfo_190 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_195 = ssf-release: notes_plat_sysinfo_200 = SSF_VERSION=core-2016.0:hpc-cluster-2016.0:compat-base-2016.0:compat-hpc-2016.0 notes_plat_sysinfo_205 = system-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_210 = system-release-cpe: cpe:/o:oracle:linux:7:3:server notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = uname -a: notes_plat_sysinfo_225 = Linux ekf106 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST notes_plat_sysinfo_230 = 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = run-level 3 Jun 29 18:09 notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = SPEC is set to: /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0 notes_plat_sysinfo_255 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_260 = panfs://36.101.212.1/innl panfs 108T 40T 69T 37% /global/panfs02/innl notes_plat_sysinfo_265 = Additional information from dmidecode: notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_280 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_285 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_290 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = (End of data from sysinfo program) # hw_cpu_name = Intel Xeon Phi 7250F # hw_disk = 108 TB add more disk info here # hw_memory001 = 110.045 GB fixme: If using DDR3, format is: # hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' # hw_nchips = 1 # prepared_by = abobyr (is never output, only tags rawfile) # sw_file = panfs # sw_os001 = Red Hat Enterprise Linux Server release 7.3 (Maipo) # sw_os002 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1 # sw_state = Run level 3 (add definition here) # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on ekf106 Fri Jun 30 11:58:43 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon Phi(TM) CPU 7250F @ 1.40GHz notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 272 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 68 notes_plat_sysinfo_085 = siblings : 272 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 notes_plat_sysinfo_095 = 24 25 26 27 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 notes_plat_sysinfo_100 = 51 52 53 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 notes_plat_sysinfo_105 = cache size : 1024 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 115390452 kB notes_plat_sysinfo_125 = HugePages_Total: 0 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = oracle-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_150 = os-release: notes_plat_sysinfo_155 = NAME="Oracle Linux Server" notes_plat_sysinfo_160 = VERSION="7.3" notes_plat_sysinfo_165 = ID="ol" notes_plat_sysinfo_170 = VERSION_ID="7.3" notes_plat_sysinfo_175 = PRETTY_NAME="Oracle Linux Server 7.3" notes_plat_sysinfo_180 = ANSI_COLOR="0;31" notes_plat_sysinfo_185 = CPE_NAME="cpe:/o:oracle:linux:7:3:server" notes_plat_sysinfo_190 = HOME_URL="https://linux.oracle.com/" notes_plat_sysinfo_195 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_200 = ssf-release: notes_plat_sysinfo_205 = SSF_VERSION=core-2016.0:hpc-cluster-2016.0:compat-base-2016.0:compat-hpc-2016.0 notes_plat_sysinfo_210 = system-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:oracle:linux:7:3:server notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux ekf106 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST notes_plat_sysinfo_235 = 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 29 18:09 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = panfs://36.101.212.1/innl panfs 108T 40T 69T 37% /global/panfs02/innl notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon Phi 7250F hw_disk = 108 TB add more disk info here hw_memory001 = 110.045 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_nchips = 1 prepared_by = abobyr (is never output, only tags rawfile) sw_file = panfs sw_os002 = Red Hat Enterprise Linux Server release 7.3 sw_os003 = (Maipo) sw_os004 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1 sw_state = Run level 3 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = config/flags/Intel-icc18.0-linux64.xml # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/config/flags/Intel-icc18.0-linux64.xml hw_cpu_name = Intel Xeon Phi 7250F hw_cpu_char = Simultaneous multithreading (SMT) ON, Turbo ON hw_cpu_mhz = 1400 hw_cpu_max_mhz = 1600 hw_fpu = Integrated hw_ncpuorder = 1 to 1 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per 2 cores hw_tcache = None hw_ocache = None hw_disk = 108 TB add more disk info here hw_other = None hw_accel_model = Intel(R) Xeon Phi(TM) CPU 7250F hw_accel_vendor = Intel hw_accel_name = Intel(R) Xeon Phi(TM) CPU 7250F hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes hw_accel_desc = Second generation Xeon Phi self-bootable CPU sw_accel_driver = None sw_compiler = C/C++/Fortran: Version 18.0 sw_file = panfs sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = FFTW 3.3.6 test_sponsor = Intel license_num = 13 tester = Intel hw_avail = Dec-2016 sw_avail = Sep-2017 prepared_by = abobyr (is never output, only tags rawfile) hw_vendor = Intel sw_parallel_other = No hw_nthreadspercore = 4 hw_ncoresperchip = 68 hw_ncores = 68 hw_nchips = 1 hw_memory000 = 96 GB (6 x 16 GB 2Rx8 PC4-2400T-REB-11, ECC) hw_memory001 = 110.045 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_model000 = Intel(R) Xeon Phi(TM) CPU 7250F, 1.40 GHz, hw_model001 = SMT ON, Turbo ON, flat MCDRAM sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = Red Hat Enterprise Linux Server release 7.3 sw_os003 = (Maipo) sw_os004 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on ekf106 Fri Jun 30 11:58:43 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon Phi(TM) CPU 7250F @ 1.40GHz notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 272 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 68 notes_plat_sysinfo_085 = siblings : 272 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 notes_plat_sysinfo_095 = 24 25 26 27 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 notes_plat_sysinfo_100 = 51 52 53 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 notes_plat_sysinfo_105 = cache size : 1024 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 115390452 kB notes_plat_sysinfo_125 = HugePages_Total: 0 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = oracle-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_150 = os-release: notes_plat_sysinfo_155 = NAME="Oracle Linux Server" notes_plat_sysinfo_160 = VERSION="7.3" notes_plat_sysinfo_165 = ID="ol" notes_plat_sysinfo_170 = VERSION_ID="7.3" notes_plat_sysinfo_175 = PRETTY_NAME="Oracle Linux Server 7.3" notes_plat_sysinfo_180 = ANSI_COLOR="0;31" notes_plat_sysinfo_185 = CPE_NAME="cpe:/o:oracle:linux:7:3:server" notes_plat_sysinfo_190 = HOME_URL="https://linux.oracle.com/" notes_plat_sysinfo_195 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_200 = ssf-release: notes_plat_sysinfo_205 = SSF_VERSION=core-2016.0:hpc-cluster-2016.0:compat-base-2016.0:compat-hpc-2016.0 notes_plat_sysinfo_210 = system-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:oracle:linux:7:3:server notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux ekf106 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST notes_plat_sysinfo_235 = 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 29 18:09 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = panfs://36.101.212.1/innl panfs 108T 40T 69T 37% /global/panfs02/innl notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/config/flags/Intel-icc18.0-linux64.xml hw_cpu_name = Intel Xeon Phi 7250F hw_cpu_char = Simultaneous multithreading (SMT) ON, Turbo ON hw_cpu_mhz = 1400 hw_cpu_max_mhz = 1600 hw_fpu = Integrated hw_ncpuorder = 1 to 1 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per 2 cores hw_tcache = None hw_ocache = None hw_disk = 108 TB add more disk info here hw_other = None hw_accel_model = Intel Xeon Phi CPU 7250F hw_accel_vendor = Intel hw_accel_name = Intel Xeon Phi CPU 7250F hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes hw_accel_desc = Second generation Xeon Phi self-bootable CPU sw_accel_driver = None sw_compiler = C/C++/Fortran: Version 18.0 sw_file = panfs sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = FFTW 3.3.6 test_sponsor = Intel license_num = 13 tester = Intel hw_avail = Dec-2016 sw_avail = Sep-2017 prepared_by = abobyr (is never output, only tags rawfile) hw_vendor = Intel sw_parallel_other = No hw_nthreadspercore = 4 hw_ncoresperchip = 68 hw_ncores = 68 hw_nchips = 1 hw_memory000 = 96 GB (6 x 16 GB 2Rx8 PC4-2400T-REB-11, ECC) hw_memory001 = 110.045 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_model000 = Intel Xeon Phi CPU 7250F, 1.40 GHz, hw_model001 = SMT ON, Turbo ON, flat MCDRAM sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = Red Hat Enterprise Linux Server release 7.3 sw_os003 = (Maipo) sw_os004 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on ekf106 Fri Jun 30 11:58:43 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon Phi(TM) CPU 7250F @ 1.40GHz notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 272 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 68 notes_plat_sysinfo_085 = siblings : 272 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 notes_plat_sysinfo_095 = 24 25 26 27 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 notes_plat_sysinfo_100 = 51 52 53 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 notes_plat_sysinfo_105 = cache size : 1024 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 115390452 kB notes_plat_sysinfo_125 = HugePages_Total: 0 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = oracle-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_150 = os-release: notes_plat_sysinfo_155 = NAME="Oracle Linux Server" notes_plat_sysinfo_160 = VERSION="7.3" notes_plat_sysinfo_165 = ID="ol" notes_plat_sysinfo_170 = VERSION_ID="7.3" notes_plat_sysinfo_175 = PRETTY_NAME="Oracle Linux Server 7.3" notes_plat_sysinfo_180 = ANSI_COLOR="0;31" notes_plat_sysinfo_185 = CPE_NAME="cpe:/o:oracle:linux:7:3:server" notes_plat_sysinfo_190 = HOME_URL="https://linux.oracle.com/" notes_plat_sysinfo_195 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_200 = ssf-release: notes_plat_sysinfo_205 = SSF_VERSION=core-2016.0:hpc-cluster-2016.0:compat-base-2016.0:compat-hpc-2016.0 notes_plat_sysinfo_210 = system-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:oracle:linux:7:3:server notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux ekf106 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST notes_plat_sysinfo_235 = 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 29 18:09 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = panfs://36.101.212.1/innl panfs 108T 40T 69T 37% /global/panfs02/innl notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/config/flags/Intel-icc18.0-linux64.xml hw_cpu_name = Intel Xeon Phi 7250F hw_cpu_char = Simultaneous multithreading (SMT) ON, Turbo ON hw_cpu_mhz = 1400 hw_cpu_max_mhz = 1600 hw_fpu = Integrated hw_ncpuorder = 1 to 1 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per 2 cores hw_tcache = None hw_ocache = None hw_disk = 108 TB add more disk info here hw_other = None hw_accel_model = Intel Xeon Phi CPU 7250F hw_accel_vendor = Intel hw_accel_name = Intel Xeon Phi CPU 7250F hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes hw_accel_desc = Second generation Xeon Phi self-bootable CPU sw_accel_driver = None sw_compiler = C/C++/Fortran: Version 18.0 sw_file = panfs sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = FFTW 3.3.6 test_sponsor = Intel license_num = 13 tester = Intel hw_avail = Dec-2016 sw_avail = Sep-2017 prepared_by = abobyr (is never output, only tags rawfile) hw_vendor = Intel sw_parallel_other = No hw_nthreadspercore = 4 hw_ncoresperchip = 68 hw_ncores = 68 hw_nchips = 1 hw_memory000 = 96 GB (6 x 16 GB 2Rx8 PC4-2400T-REB-11, ECC) hw_memory001 = 110.045 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_model000 = Intel Xeon Phi CPU 7250F, 1.40 GHz, hw_model001 = SMT ON, Turbo ON, flat MCDRAM sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = Red Hat Enterprise Linux Server release 7.3 sw_os003 = (Maipo) sw_os004 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on ekf106 Fri Jun 30 11:58:43 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon Phi(TM) CPU 7250F @ 1.40GHz notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 272 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 68 notes_plat_sysinfo_085 = siblings : 272 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 notes_plat_sysinfo_095 = 24 25 26 27 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 notes_plat_sysinfo_100 = 51 52 53 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 notes_plat_sysinfo_105 = cache size : 1024 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 115390452 kB notes_plat_sysinfo_125 = HugePages_Total: 0 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = oracle-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_150 = os-release: notes_plat_sysinfo_155 = NAME="Oracle Linux Server" notes_plat_sysinfo_160 = VERSION="7.3" notes_plat_sysinfo_165 = ID="ol" notes_plat_sysinfo_170 = VERSION_ID="7.3" notes_plat_sysinfo_175 = PRETTY_NAME="Oracle Linux Server 7.3" notes_plat_sysinfo_180 = ANSI_COLOR="0;31" notes_plat_sysinfo_185 = CPE_NAME="cpe:/o:oracle:linux:7:3:server" notes_plat_sysinfo_190 = HOME_URL="https://linux.oracle.com/" notes_plat_sysinfo_195 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_200 = ssf-release: notes_plat_sysinfo_205 = SSF_VERSION=core-2016.0:hpc-cluster-2016.0:compat-base-2016.0:compat-hpc-2016.0 notes_plat_sysinfo_210 = system-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:oracle:linux:7:3:server notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux ekf106 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST notes_plat_sysinfo_235 = 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 29 18:09 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = panfs://36.101.212.1/innl panfs 108T 40T 69T 37% /global/panfs02/innl notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/config/flags/Intel-icc18.0-linux64.xml hw_cpu_name = Intel Xeon Phi 7250F hw_cpu_char = Simultaneous multithreading (SMT) ON, Turbo ON hw_cpu_mhz = 1400 hw_cpu_max_mhz = 1600 hw_fpu = Integrated hw_ncpuorder = 1 to 1 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per 2 cores hw_tcache = None hw_ocache = None hw_disk = 108 TB add more disk info here hw_other = None hw_accel_model = Intel Xeon Phi CPU 7250F hw_accel_vendor = Intel hw_accel_name = Intel Xeon Phi CPU 7250F hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes hw_accel_desc = Second generation Xeon Phi self-bootable CPU sw_accel_driver = None sw_compiler = C/C++/Fortran: Version 18.0 sw_file = panfs sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = FFTW 3.3.6 test_sponsor = Intel license_num = 13 tester = Intel hw_avail = Dec-2016 sw_avail = Sep-2017 prepared_by = abobyr (is never output, only tags rawfile) hw_vendor = Intel sw_parallel_other = No hw_nthreadspercore = 4 hw_ncoresperchip = 68 hw_ncores = 68 hw_nchips = 1 hw_memory000 = 96 GB (6 x 16 GB 2Rx8 PC4-2400T-REB-11, ECC) hw_memory001 = 110.045 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_model000 = Intel Xeon Phi CPU 7250F, 1.40 GHz, hw_model001 = SMT ON, Turbo ON, flat MCDRAM sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = Red Hat Enterprise Linux Server release 7.3 sw_os003 = (Maipo) sw_os004 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on ekf106 Fri Jun 30 11:58:43 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon Phi(TM) CPU 7250F @ 1.40GHz notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 272 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 68 notes_plat_sysinfo_085 = siblings : 272 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 notes_plat_sysinfo_095 = 24 25 26 27 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 notes_plat_sysinfo_100 = 51 52 53 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 notes_plat_sysinfo_105 = cache size : 1024 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 115390452 kB notes_plat_sysinfo_125 = HugePages_Total: 0 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = oracle-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_150 = os-release: notes_plat_sysinfo_155 = NAME="Oracle Linux Server" notes_plat_sysinfo_160 = VERSION="7.3" notes_plat_sysinfo_165 = ID="ol" notes_plat_sysinfo_170 = VERSION_ID="7.3" notes_plat_sysinfo_175 = PRETTY_NAME="Oracle Linux Server 7.3" notes_plat_sysinfo_180 = ANSI_COLOR="0;31" notes_plat_sysinfo_185 = CPE_NAME="cpe:/o:oracle:linux:7:3:server" notes_plat_sysinfo_190 = HOME_URL="https://linux.oracle.com/" notes_plat_sysinfo_195 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_200 = ssf-release: notes_plat_sysinfo_205 = SSF_VERSION=core-2016.0:hpc-cluster-2016.0:compat-base-2016.0:compat-hpc-2016.0 notes_plat_sysinfo_210 = system-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:oracle:linux:7:3:server notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux ekf106 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST notes_plat_sysinfo_235 = 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 29 18:09 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = panfs://36.101.212.1/innl panfs 108T 40T 69T 37% /global/panfs02/innl notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/config/flags/Intel-icc18.0-linux64.xml hw_cpu_name = Intel Xeon Phi 7250F hw_cpu_char = Simultaneous multithreading (SMT) ON, Turbo ON hw_cpu_mhz = 1400 hw_cpu_max_mhz = 1600 hw_fpu = Integrated hw_ncpuorder = 1 to 1 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per 2 cores hw_tcache = None hw_ocache = None hw_disk = 108 TB add more disk info here hw_other = None hw_accel_model = Intel Xeon Phi CPU 7250F hw_accel_vendor = Intel hw_accel_name = Intel Xeon Phi CPU 7250F hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes hw_accel_desc = Second generation Xeon Phi self-bootable CPU sw_accel_driver = None sw_compiler = C/C++/Fortran: Version 18.0 sw_file = panfs sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = FFTW 3.3.6 test_sponsor = Intel license_num = 13 tester = Intel hw_avail = Dec-2016 sw_avail = Sep-2017 prepared_by = abobyr (is never output, only tags rawfile) hw_vendor = Intel sw_parallel_other = No hw_nthreadspercore = 4 hw_ncoresperchip = 68 hw_ncores = 68 hw_nchips = 1 hw_memory000 = 128 GB (6 x 16 GB 2Rx8 PC4-2400T-R + hw_memory001 = 16 GB MCDRAM (flat) ) hw_model000 = Intel Xeon Phi CPU 7250F, 1.40 GHz, hw_model001 = SMT ON, Turbo ON, flat MCDRAM sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = Red Hat Enterprise Linux Server release 7.3 sw_os003 = (Maipo) sw_os004 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on ekf106 Fri Jun 30 11:58:43 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon Phi(TM) CPU 7250F @ 1.40GHz notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 272 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 68 notes_plat_sysinfo_085 = siblings : 272 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 notes_plat_sysinfo_095 = 24 25 26 27 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 notes_plat_sysinfo_100 = 51 52 53 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 notes_plat_sysinfo_105 = cache size : 1024 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 115390452 kB notes_plat_sysinfo_125 = HugePages_Total: 0 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = oracle-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_150 = os-release: notes_plat_sysinfo_155 = NAME="Oracle Linux Server" notes_plat_sysinfo_160 = VERSION="7.3" notes_plat_sysinfo_165 = ID="ol" notes_plat_sysinfo_170 = VERSION_ID="7.3" notes_plat_sysinfo_175 = PRETTY_NAME="Oracle Linux Server 7.3" notes_plat_sysinfo_180 = ANSI_COLOR="0;31" notes_plat_sysinfo_185 = CPE_NAME="cpe:/o:oracle:linux:7:3:server" notes_plat_sysinfo_190 = HOME_URL="https://linux.oracle.com/" notes_plat_sysinfo_195 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_200 = ssf-release: notes_plat_sysinfo_205 = SSF_VERSION=core-2016.0:hpc-cluster-2016.0:compat-base-2016.0:compat-hpc-2016.0 notes_plat_sysinfo_210 = system-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:oracle:linux:7:3:server notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux ekf106 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST notes_plat_sysinfo_235 = 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 29 18:09 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = panfs://36.101.212.1/innl panfs 108T 40T 69T 37% /global/panfs02/innl notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/config/flags/Intel-icc18.0-linux64.xml hw_cpu_name = Intel Xeon Phi 7250F hw_cpu_char = Simultaneous multithreading (SMT) ON, Turbo ON hw_cpu_mhz = 1400 hw_cpu_max_mhz = 1600 hw_fpu = Integrated hw_ncpuorder = 1 to 1 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per 2 cores hw_tcache = None hw_ocache = None hw_disk = 108 TB add more disk info here hw_other = None hw_accel_model = Intel Xeon Phi CPU 7250F hw_accel_vendor = Intel hw_accel_name = Intel Xeon Phi CPU 7250F hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes hw_accel_desc = Second generation Xeon Phi self-bootable CPU sw_accel_driver = None sw_file = panfs sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = FFTW 3.3.6 test_sponsor = Intel license_num = 13 tester = Intel hw_avail = Dec-2016 sw_avail = not later than 27-Sep-2017 prepared_by = abobyr (is never output, only tags rawfile) hw_vendor = Intel sw_parallel_other = No hw_nthreadspercore = 4 hw_ncoresperchip = 68 hw_ncores = 68 hw_nchips = 1 hw_memory000 = 128 GB (6 x 16 GB 2Rx8 PC4-2400T-R + hw_memory001 = 16 GB MCDRAM (flat) ) hw_model000 = Intel Xeon Phi CPU 7250F, 1.40 GHz, hw_model001 = SMT ON, Turbo ON, flat MCDRAM sw_compiler000 = C/C++/Fortran: Version 18.0 of Intel Composer XE sw_compiler001 = for Linux Build sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = Red Hat Enterprise Linux Server release 7.3 sw_os003 = (Maipo) sw_os004 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on ekf106 Fri Jun 30 11:58:43 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon Phi(TM) CPU 7250F @ 1.40GHz notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 272 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 68 notes_plat_sysinfo_085 = siblings : 272 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 notes_plat_sysinfo_095 = 24 25 26 27 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 notes_plat_sysinfo_100 = 51 52 53 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 notes_plat_sysinfo_105 = cache size : 1024 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 115390452 kB notes_plat_sysinfo_125 = HugePages_Total: 0 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = oracle-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_150 = os-release: notes_plat_sysinfo_155 = NAME="Oracle Linux Server" notes_plat_sysinfo_160 = VERSION="7.3" notes_plat_sysinfo_165 = ID="ol" notes_plat_sysinfo_170 = VERSION_ID="7.3" notes_plat_sysinfo_175 = PRETTY_NAME="Oracle Linux Server 7.3" notes_plat_sysinfo_180 = ANSI_COLOR="0;31" notes_plat_sysinfo_185 = CPE_NAME="cpe:/o:oracle:linux:7:3:server" notes_plat_sysinfo_190 = HOME_URL="https://linux.oracle.com/" notes_plat_sysinfo_195 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_200 = ssf-release: notes_plat_sysinfo_205 = SSF_VERSION=core-2016.0:hpc-cluster-2016.0:compat-base-2016.0:compat-hpc-2016.0 notes_plat_sysinfo_210 = system-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:oracle:linux:7:3:server notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux ekf106 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST notes_plat_sysinfo_235 = 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 29 18:09 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = panfs://36.101.212.1/innl panfs 108T 40T 69T 37% /global/panfs02/innl notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/config/flags/Intel-icc18.0-linux64.xml hw_cpu_name = Intel Xeon Phi 7250F hw_cpu_char = Simultaneous multithreading (SMT) ON, Turbo ON hw_cpu_mhz = 1400 hw_cpu_max_mhz = 1600 hw_fpu = Integrated hw_ncpuorder = 1 to 1 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per 2 cores hw_tcache = None hw_ocache = None hw_disk = 108 TB add more disk info here hw_other = None hw_accel_model = Intel Xeon Phi CPU 7250F hw_accel_vendor = Intel hw_accel_name = Intel Xeon Phi CPU 7250F hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes hw_accel_desc = Second generation Xeon Phi self-bootable CPU sw_accel_driver = N/A sw_file = panfs sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = FFTW 3.3.6 test_sponsor = Intel license_num = 13 tester = Intel hw_avail = Dec-2016 sw_avail = Sep-2017 prepared_by = abobyr (is never output, only tags rawfile) hw_vendor = Intel sw_parallel_other = No hw_nthreadspercore = 4 hw_ncoresperchip = 68 hw_ncores = 68 hw_nchips = 1 hw_memory000 = 128 GB (6 x 16 GB 2Rx8 PC4-2400T-R + hw_memory001 = 16 GB MCDRAM (flat) ) hw_model000 = Intel Xeon Phi CPU 7250F, 1.40 GHz, hw_model001 = SMT ON, Turbo ON, flat MCDRAM sw_compiler000 = C/C++/Fortran: Version 18.0 of Intel Composer XE sw_compiler001 = for Linux Build sw_compiler002 = pre-production build, will be available not later sw_compiler003 = 27-Sep-2017 sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = Red Hat Enterprise Linux Server release 7.3 sw_os003 = (Maipo) sw_os004 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on ekf106 Fri Jun 30 11:58:43 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon Phi(TM) CPU 7250F @ 1.40GHz notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 272 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 68 notes_plat_sysinfo_085 = siblings : 272 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 notes_plat_sysinfo_095 = 24 25 26 27 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 notes_plat_sysinfo_100 = 51 52 53 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 notes_plat_sysinfo_105 = cache size : 1024 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 115390452 kB notes_plat_sysinfo_125 = HugePages_Total: 0 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = oracle-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_150 = os-release: notes_plat_sysinfo_155 = NAME="Oracle Linux Server" notes_plat_sysinfo_160 = VERSION="7.3" notes_plat_sysinfo_165 = ID="ol" notes_plat_sysinfo_170 = VERSION_ID="7.3" notes_plat_sysinfo_175 = PRETTY_NAME="Oracle Linux Server 7.3" notes_plat_sysinfo_180 = ANSI_COLOR="0;31" notes_plat_sysinfo_185 = CPE_NAME="cpe:/o:oracle:linux:7:3:server" notes_plat_sysinfo_190 = HOME_URL="https://linux.oracle.com/" notes_plat_sysinfo_195 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_200 = ssf-release: notes_plat_sysinfo_205 = SSF_VERSION=core-2016.0:hpc-cluster-2016.0:compat-base-2016.0:compat-hpc-2016.0 notes_plat_sysinfo_210 = system-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:oracle:linux:7:3:server notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux ekf106 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST notes_plat_sysinfo_235 = 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 29 18:09 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = panfs://36.101.212.1/innl panfs 108T 40T 69T 37% /global/panfs02/innl notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/config/flags/Intel-icc18.0-linux64.xml hw_cpu_name = Intel Xeon Phi 7250F hw_cpu_char = Simultaneous multithreading (SMT) ON, Turbo ON hw_cpu_mhz = 1400 hw_cpu_max_mhz = 1600 hw_fpu = Integrated hw_ncpuorder = 1 to 1 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per 2 cores hw_tcache = None hw_ocache = None hw_disk = 108 TB add more disk info here hw_other = None hw_accel_model = Intel Xeon Phi CPU 7250F hw_accel_vendor = Intel hw_accel_name = Intel Xeon Phi CPU 7250F hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes hw_accel_desc = Second generation Xeon Phi self-bootable CPU sw_accel_driver = N/A sw_file = panfs sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = FFTW 3.3.6 test_sponsor = Intel license_num = 13 tester = Intel hw_avail = Dec-2016 sw_avail = Sep-2017 prepared_by = abobyr (is never output, only tags rawfile) hw_vendor = Intel sw_parallel_other = No hw_nthreadspercore = 4 hw_ncoresperchip = 68 hw_ncores = 68 hw_nchips = 1 hw_memory000 = 128 GB (6 x 16 GB 2Rx8 PC4-2400T-R + hw_memory001 = 16 GB MCDRAM (flat) ) hw_model000 = Intel Xeon Phi CPU 7250F, 1.40 GHz, hw_model001 = SMT ON, Turbo ON, flat MCDRAM sw_compiler000 = C/C++/Fortran: Version 18.0 of Intel Composer XE sw_compiler001 = for Linux Build sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = Red Hat Enterprise Linux Server release 7.3 sw_os003 = (Maipo) sw_os004 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on ekf106 Fri Jun 30 11:58:43 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon Phi(TM) CPU 7250F @ 1.40GHz notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 272 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 68 notes_plat_sysinfo_085 = siblings : 272 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 notes_plat_sysinfo_095 = 24 25 26 27 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 notes_plat_sysinfo_100 = 51 52 53 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 notes_plat_sysinfo_105 = cache size : 1024 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 115390452 kB notes_plat_sysinfo_125 = HugePages_Total: 0 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = oracle-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_150 = os-release: notes_plat_sysinfo_155 = NAME="Oracle Linux Server" notes_plat_sysinfo_160 = VERSION="7.3" notes_plat_sysinfo_165 = ID="ol" notes_plat_sysinfo_170 = VERSION_ID="7.3" notes_plat_sysinfo_175 = PRETTY_NAME="Oracle Linux Server 7.3" notes_plat_sysinfo_180 = ANSI_COLOR="0;31" notes_plat_sysinfo_185 = CPE_NAME="cpe:/o:oracle:linux:7:3:server" notes_plat_sysinfo_190 = HOME_URL="https://linux.oracle.com/" notes_plat_sysinfo_195 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_200 = ssf-release: notes_plat_sysinfo_205 = SSF_VERSION=core-2016.0:hpc-cluster-2016.0:compat-base-2016.0:compat-hpc-2016.0 notes_plat_sysinfo_210 = system-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:oracle:linux:7:3:server notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux ekf106 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST notes_plat_sysinfo_235 = 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 29 18:09 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = panfs://36.101.212.1/innl panfs 108T 40T 69T 37% /global/panfs02/innl notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/config/flags/Intel-icc18.0-linux64.xml hw_cpu_name = Intel Xeon Phi 7250F hw_cpu_char = Simultaneous multithreading (SMT) ON, Turbo ON hw_cpu_mhz = 1400 hw_cpu_max_mhz = 1600 hw_fpu = Integrated hw_ncpuorder = 1 to 1 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per 2 cores hw_tcache = None hw_ocache = None hw_disk = 108 TB add more disk info here hw_other = None hw_accel_model = Intel Xeon Phi CPU 7250F hw_accel_vendor = Intel hw_accel_name = Intel Xeon Phi CPU 7250F hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes hw_accel_desc = Second generation Xeon Phi self-bootable CPU sw_accel_driver = N/A sw_file = panfs sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = FFTW 3.3.6 test_sponsor = Intel license_num = 13 tester = Intel hw_avail = Dec-2016 sw_avail = Sep-2017 prepared_by = abobyr (is never output, only tags rawfile) hw_vendor = Intel sw_parallel_other = No hw_nthreadspercore = 4 hw_ncoresperchip = 68 hw_ncores = 68 hw_nchips = 1 hw_memory000 = 128 GB (6 x 16 GB 2Rx8 PC4-2400T-R + hw_memory001 = 16 GB MCDRAM (flat) ) hw_model000 = Intel Xeon Phi CPU 7250F, 1.40 GHz, hw_model001 = SMT ON, Turbo ON, flat MCDRAM sw_compiler000 = C/C++/Fortran: Version 18.0 of Intel Composer XE sw_compiler001 = for Linux Build sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = Red Hat Enterprise Linux Server release 7.3 sw_os003 = (Maipo) sw_os004 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on ekf106 Fri Jun 30 11:58:43 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon Phi(TM) CPU 7250F @ 1.40GHz notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 272 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 68 notes_plat_sysinfo_085 = siblings : 272 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 notes_plat_sysinfo_095 = 24 25 26 27 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 notes_plat_sysinfo_100 = 51 52 53 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 notes_plat_sysinfo_105 = cache size : 1024 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 115390452 kB notes_plat_sysinfo_125 = HugePages_Total: 0 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = oracle-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_150 = os-release: notes_plat_sysinfo_155 = NAME="Oracle Linux Server" notes_plat_sysinfo_160 = VERSION="7.3" notes_plat_sysinfo_165 = ID="ol" notes_plat_sysinfo_170 = VERSION_ID="7.3" notes_plat_sysinfo_175 = PRETTY_NAME="Oracle Linux Server 7.3" notes_plat_sysinfo_180 = ANSI_COLOR="0;31" notes_plat_sysinfo_185 = CPE_NAME="cpe:/o:oracle:linux:7:3:server" notes_plat_sysinfo_190 = HOME_URL="https://linux.oracle.com/" notes_plat_sysinfo_195 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_200 = ssf-release: notes_plat_sysinfo_205 = SSF_VERSION=core-2016.0:hpc-cluster-2016.0:compat-base-2016.0:compat-hpc-2016.0 notes_plat_sysinfo_210 = system-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:oracle:linux:7:3:server notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux ekf106 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST notes_plat_sysinfo_235 = 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 29 18:09 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = panfs://36.101.212.1/innl panfs 108T 40T 69T 37% /global/panfs02/innl notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_submit_000 =The following expression was used for the submit command: notes_submit_005 =submit = numactl -m 1 $command # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = https://www.spec.org/accel/flags/Intel-icc18.0-linux64.xml hw_cpu_name = Intel Xeon Phi 7250F hw_cpu_char = Simultaneous multithreading (SMT) ON, Turbo ON hw_cpu_mhz = 1400 hw_cpu_max_mhz = 1600 hw_fpu = Integrated hw_ncpuorder = 1 to 1 chip hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per 2 cores hw_tcache = None hw_ocache = None hw_disk = 108 TB Panasas ActiveStor 14 hw_other = None hw_accel_model = Intel Xeon Phi CPU 7250F hw_accel_vendor = Intel hw_accel_name = Intel Xeon Phi CPU 7250F hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes sw_accel_driver = N/A sw_file = panfs sw_state = Run level 3 (default) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_other = FFTW 3.3.6 hw_accel_desc000 = Second generation Xeon Phi self-bootable CPU hw_accel_desc005 = SMT ON, Turbo ON, MCDRAM flat mode test_sponsor = Intel license_num = 13 tester = Intel hw_avail = Dec-2016 sw_avail = Sep-2017 prepared_by = abobyr (is never output, only tags rawfile) hw_vendor = Intel sw_parallel_other = No hw_nthreadspercore = 4 hw_ncoresperchip = 68 hw_ncores = 68 hw_nchips = 1 hw_memory000 = 96 GB (6 x 16 GB 2Rx8 PC4-2400T-R hw_memory005 = ECC Registered) + 16 GB MCDRAM (flat) hw_model000 = Endeavour Node(Intel Xeon Phi CPU 7250F, hw_model001 = 1.40 GHz, SMT ON, Turbo ON, flat MCDRAM) sw_compiler000 = C/C++/Fortran: Version 18.0 of Intel Composer XE sw_compiler001 = for Linux Build sw_os000 = Red Hat Enterprise Linux Server release 7.3 sw_os001 = (Maipo) sw_os002 = Red Hat Enterprise Linux Server release 7.3 sw_os003 = (Maipo) sw_os004 = 3.10.0-514.6.2.0.1.el7.x86_64.knl1 notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_015 = running on ekf106 Fri Jun 30 11:58:43 2017 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon Phi(TM) CPU 7250F @ 1.40GHz notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 272 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 68 notes_plat_sysinfo_085 = siblings : 272 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 notes_plat_sysinfo_095 = 24 25 26 27 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 notes_plat_sysinfo_100 = 51 52 53 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 notes_plat_sysinfo_105 = cache size : 1024 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 115390452 kB notes_plat_sysinfo_125 = HugePages_Total: 0 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = oracle-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_150 = os-release: notes_plat_sysinfo_155 = NAME="Oracle Linux Server" notes_plat_sysinfo_160 = VERSION="7.3" notes_plat_sysinfo_165 = ID="ol" notes_plat_sysinfo_170 = VERSION_ID="7.3" notes_plat_sysinfo_175 = PRETTY_NAME="Oracle Linux Server 7.3" notes_plat_sysinfo_180 = ANSI_COLOR="0;31" notes_plat_sysinfo_185 = CPE_NAME="cpe:/o:oracle:linux:7:3:server" notes_plat_sysinfo_190 = HOME_URL="https://linux.oracle.com/" notes_plat_sysinfo_195 = redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo) notes_plat_sysinfo_200 = ssf-release: notes_plat_sysinfo_205 = SSF_VERSION=core-2016.0:hpc-cluster-2016.0:compat-base-2016.0:compat-hpc-2016.0 notes_plat_sysinfo_210 = system-release: Oracle Linux Server release 7.3 notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:oracle:linux:7:3:server notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux ekf106 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17 MST notes_plat_sysinfo_235 = 2017 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 Jun 29 18:09 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit1.2_knl_18.0 notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = panfs://36.101.212.1/innl panfs 108T 40T 69T 37% /global/panfs02/innl notes_plat_sysinfo_270 = Additional information from dmidecode: notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_285 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_290 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_295 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_300 = notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = (End of data from sysinfo program) notes_submit_000 =The following expression was used for the submit command: notes_submit_005 =submit = numactl -m 1 $command notes_submit_010 =The following additional kernel-options were used: notes_submit_015 =rcu_nocbs=2-271 nohz_full=2-271 notes_000 =Used Environment Variables: notes_005 = ENV_KMP_AFFINITY=compact,0 - assign OpenMP Threads continously notes_010 = ENV_OMP_NUM_THREADS=136 - limits number of Threads to be started notes_015 = ENV_KMP_HW_SUBSET=1S,68C,2T - control Thread distribution accross sockets, cores and hw threads notes_020 = ENV_FORT_BUFFERED=true - enables buffered I/O for Fortran