# Invocation command line: # /local/home/colgrove/SPECACCEL/bin/runspec -c tesla-k40-pgi175 --reportable -T base openacc # output_root was not used for this run ############################################################################ # Invocation command line: # /local/home/SPECACCEL/bin/runspec -c tesla-pgi174 --reportable -T base,peak -i test,train,ref openacc # output_root was not used for this run ############################################################################ #################################################################### # Tester information #################################################################### # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 license_num = 019 tester = NVIDIA Corporation test_sponsor = NVIDIA Corporation ###################################################################### # The header section of the config file. Must appear # before any instances of "default=" # # ext = how the binaries you generated will be identified # tune = specify "base" or "peak" or "all" ext = pgi_k40 output_format = asc teeout = yes teerunout = yes tune = base #output_root = /local/home//SPECACCEL #################################################################### # HOST Hardware information #################################################################### default=default=default=default: hw_avail = Oct-2015 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3600 hw_fpu = Integrated #hw_nchips = 1 hw_ncores = 32 hw_ncoresperchip = 16 hw_nthreadspercore = 2 hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 40 MB I+D on chip per chip hw_ocache = None hw_vendor = Supermicro hw_model = SuperServer 1028GR-TR flagsurl000 = /local/home/colgrove/SPECACCEL/pgi2017_flags.xml sw_parallel_other = No hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R) hw_other = None #################################################################### # Accelerator Hardware information #################################################################### hw_accel_model = Tesla K40 hw_accel_vendor = NVIDIA Corporation hw_accel_name = Tesla K40m hw_accel_type = GPU hw_accel_connect = PCIe hw_accel_ecc = Yes #################################################################### # Power and temperature meter configuration #################################################################### power = no #################################################################### # Software information #################################################################### default=default=default=default: sw_avail = May-2017 sw_compiler = PGI Professional Edition, Release 17.5 sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 375.20 CC = pgcc CXX = pgc++ FC = pgfortran openacc=base=default=default: OPTIMIZE = -fast -Mfprelaxed FOPTIMIZE = -acc -ta=tesla:cc35,cuda8.0 COPTIMIZE = -acc -ta=tesla:cc35,cuda8.0 openacc=peak=default=default: basepeak=true 359.miniGhost=default=default=default: EXTRA_LDFLAGS += -Mnomain notes_os_form_000 = Stacksize set to 'unlimited' notes_plat_sysinfo_290= Information from pgaccelinfo notes_plat_sysinfo_295= notes_plat_sysinfo_300= CUDA Driver Version: 8000 notes_plat_sysinfo_305= NVRM version: NVIDIA UNIX x86_64 Kernel Module 375.20 Tue Nov 15 16:49:10 PST 2016 notes_plat_sysinfo_310= notes_plat_sysinfo_315= Device Number: 0 notes_plat_sysinfo_320= Device Name: Tesla K40m notes_plat_sysinfo_325= Device Revision Number: 3.5 notes_plat_sysinfo_330= Global Memory Size: 12029132800 notes_plat_sysinfo_335= Number of Multiprocessors: 15 notes_plat_sysinfo_340= Number of SP Cores: 2880 notes_plat_sysinfo_345= Number of DP Cores: 960 notes_plat_sysinfo_350= Concurrent Copy and Execution: Yes notes_plat_sysinfo_355= Total Constant Memory: 65536 notes_plat_sysinfo_360= Total Shared Memory per Block: 49152 notes_plat_sysinfo_365= Registers per Block: 65536 notes_plat_sysinfo_370= Warp Size: 32 notes_plat_sysinfo_375= Maximum Threads per Block: 1024 notes_plat_sysinfo_380= Maximum Block Dimensions: 1024, 1024, 64 notes_plat_sysinfo_385= Maximum Grid Dimensions: 2147483647 x 65535 x 65535 notes_plat_sysinfo_390= Maximum Memory Pitch: 2147483647B notes_plat_sysinfo_395= Texture Alignment: 512B notes_plat_sysinfo_400= Clock Rate: 745 MHz notes_plat_sysinfo_405= Execution Timeout: No notes_plat_sysinfo_410= Integrated Device: No notes_plat_sysinfo_415= Can Map Host Memory: Yes notes_plat_sysinfo_420= Compute Mode: default notes_plat_sysinfo_425= Concurrent Kernels: Yes notes_plat_sysinfo_430= ECC Enabled: Yes notes_plat_sysinfo_435= Memory Clock Rate: 3004 MHz notes_plat_sysinfo_440= Memory Bus Width: 384 bits notes_plat_sysinfo_445= L2 Cache Size: 1572864 bytes notes_plat_sysinfo_450= Max Threads Per SMP: 2048 notes_plat_sysinfo_455= Async Engines: 2 notes_plat_sysinfo_460= Unified Addressing: Yes notes_plat_sysinfo_465= Managed Memory: Yes notes_plat_sysinfo_470= PGI Compiler Option: -ta=tesla:cc35 # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program /local/home/colgrove/SPECACCEL/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on hsw8 Wed May 10 13:11:00 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v3 @ 2.30GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 64 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 16 notes_plat_sysinfo_080 = siblings : 32 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 notes_plat_sysinfo_095 = cache size : 40960 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264038532 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.2 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux hsw8 3.10.0-327.22.2.el7.x86_64 #1 SMP Thu Jun 23 17:05:11 UTC 2016 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 May 10 10:51 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/colgrove/SPECACCEL notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos-root xfs 443G 29G 414G 7% / notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_280 = notes_plat_sysinfo_285 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2698 v3 hw_disk = 443 GB add more disk info here hw_memory001 = 251.807 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_nchips = 2 prepared_by = colgrove (is never output, only tags rawfile) sw_file = xfs sw_os000 = CentOS Linux release 7.2.1511 (Core) sw_os001 = 3.10.0-327.22.2.el7.x86_64 sw_state = Run level 3 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: sw_peak_ptrsize = Not Applicable # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /local/home/colgrove/SPECACCEL/pgi2017_flags.xml hw_cpu_name = Intel Xeon E5-2698 v3 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 40 MB I+D on chip per chip hw_ocache = None hw_disk = 443 GB add more disk info here hw_other = None hw_accel_model = Tesla K40 hw_accel_vendor = NVIDIA Corporation hw_accel_name = Tesla K40m hw_accel_type = GPU hw_accel_connect = PCIe hw_accel_ecc = Yes hw_accel_desc = See Notes sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 375.20 sw_compiler = PGI Professional Edition, Release 17.5 sw_file = xfs sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Oct-2015 sw_avail = May-2017 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SuperServer 1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 16 hw_ncores = 32 hw_nchips = 2 hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R) sw_os000 = CentOS Linux release 7.2.1511 (Core) sw_os001 = 3.10.0-327.22.2.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/colgrove/SPECACCEL/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on hsw8 Wed May 10 13:11:00 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v3 @ 2.30GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 64 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 16 notes_plat_sysinfo_080 = siblings : 32 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 notes_plat_sysinfo_095 = cache size : 40960 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264038532 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.2 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux hsw8 3.10.0-327.22.2.el7.x86_64 #1 SMP Thu Jun 23 17:05:11 UTC 2016 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 May 10 10:51 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/colgrove/SPECACCEL notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos-root xfs 443G 29G 414G 7% / notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_280 = notes_plat_sysinfo_285 = (End of data from sysinfo program) notes_plat_sysinfo_290 = Information from pgaccelinfo notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = CUDA Driver Version: 8000 notes_plat_sysinfo_305 = NVRM version: NVIDIA UNIX x86_64 Kernel Module 375.20 Tue Nov 15 16:49:10 PST 2016 notes_plat_sysinfo_310 = notes_plat_sysinfo_315 = Device Number: 0 notes_plat_sysinfo_320 = Device Name: Tesla K40m notes_plat_sysinfo_325 = Device Revision Number: 3.5 notes_plat_sysinfo_330 = Global Memory Size: 12029132800 notes_plat_sysinfo_335 = Number of Multiprocessors: 15 notes_plat_sysinfo_340 = Number of SP Cores: 2880 notes_plat_sysinfo_345 = Number of DP Cores: 960 notes_plat_sysinfo_350 = Concurrent Copy and Execution: Yes notes_plat_sysinfo_355 = Total Constant Memory: 65536 notes_plat_sysinfo_360 = Total Shared Memory per Block: 49152 notes_plat_sysinfo_365 = Registers per Block: 65536 notes_plat_sysinfo_370 = Warp Size: 32 notes_plat_sysinfo_375 = Maximum Threads per Block: 1024 notes_plat_sysinfo_380 = Maximum Block Dimensions: 1024, 1024, 64 notes_plat_sysinfo_385 = Maximum Grid Dimensions: 2147483647 x 65535 x 65535 notes_plat_sysinfo_390 = Maximum Memory Pitch: 2147483647B notes_plat_sysinfo_395 = Texture Alignment: 512B notes_plat_sysinfo_400 = Clock Rate: 745 MHz notes_plat_sysinfo_405 = Execution Timeout: No notes_plat_sysinfo_410 = Integrated Device: No notes_plat_sysinfo_415 = Can Map Host Memory: Yes notes_plat_sysinfo_420 = Compute Mode: default notes_plat_sysinfo_425 = Concurrent Kernels: Yes notes_plat_sysinfo_430 = ECC Enabled: Yes notes_plat_sysinfo_435 = Memory Clock Rate: 3004 MHz notes_plat_sysinfo_440 = Memory Bus Width: 384 bits notes_plat_sysinfo_445 = L2 Cache Size: 1572864 bytes notes_plat_sysinfo_450 = Max Threads Per SMP: 2048 notes_plat_sysinfo_455 = Async Engines: 2 notes_plat_sysinfo_460 = Unified Addressing: Yes notes_plat_sysinfo_465 = Managed Memory: Yes notes_plat_sysinfo_470 = PGI Compiler Option: -ta=tesla:cc35 notes_os_form_000 = Stacksize set to 'unlimited' # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = /local/home/colgrove/SPECACCEL/pgi2017_flags.xml hw_cpu_name = Intel Xeon E5-2698 v3 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 40 MB I+D on chip per chip hw_ocache = None hw_disk = 443 GB add more disk info here hw_other = None hw_accel_model = Tesla K40 hw_accel_vendor = NVIDIA Corporation hw_accel_name = Tesla K40m hw_accel_type = GPU hw_accel_connect = PCIe hw_accel_ecc = Yes hw_accel_desc = See Notes sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 375.20 sw_compiler = PGI Professional Edition, Release 17.5 sw_file = xfs sw_state = Run level 3 (add definition here) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Oct-2015 sw_avail = May-2017 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SuperServer 1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 16 hw_ncores = 32 hw_nchips = 2 hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R) sw_os000 = CentOS Linux release 7.2.1511 (Core) sw_os001 = 3.10.0-327.22.2.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/colgrove/SPECACCEL/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on hsw8 Wed May 10 13:11:00 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v3 @ 2.30GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 64 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 16 notes_plat_sysinfo_080 = siblings : 32 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 notes_plat_sysinfo_095 = cache size : 40960 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264038532 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.2 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux hsw8 3.10.0-327.22.2.el7.x86_64 #1 SMP Thu Jun 23 17:05:11 UTC 2016 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 May 10 10:51 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/colgrove/SPECACCEL notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos-root xfs 443G 29G 414G 7% / notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_280 = notes_plat_sysinfo_285 = (End of data from sysinfo program) notes_plat_sysinfo_290 = Information from pgaccelinfo notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = CUDA Driver Version: 8000 notes_plat_sysinfo_305 = NVRM version: NVIDIA UNIX x86_64 Kernel Module 375.20 Tue Nov 15 16:49:10 PST 2016 notes_plat_sysinfo_310 = notes_plat_sysinfo_315 = Device Number: 0 notes_plat_sysinfo_320 = Device Name: Tesla K40m notes_plat_sysinfo_325 = Device Revision Number: 3.5 notes_plat_sysinfo_330 = Global Memory Size: 12029132800 notes_plat_sysinfo_335 = Number of Multiprocessors: 15 notes_plat_sysinfo_340 = Number of SP Cores: 2880 notes_plat_sysinfo_345 = Number of DP Cores: 960 notes_plat_sysinfo_350 = Concurrent Copy and Execution: Yes notes_plat_sysinfo_355 = Total Constant Memory: 65536 notes_plat_sysinfo_360 = Total Shared Memory per Block: 49152 notes_plat_sysinfo_365 = Registers per Block: 65536 notes_plat_sysinfo_370 = Warp Size: 32 notes_plat_sysinfo_375 = Maximum Threads per Block: 1024 notes_plat_sysinfo_380 = Maximum Block Dimensions: 1024, 1024, 64 notes_plat_sysinfo_385 = Maximum Grid Dimensions: 2147483647 x 65535 x 65535 notes_plat_sysinfo_390 = Maximum Memory Pitch: 2147483647B notes_plat_sysinfo_395 = Texture Alignment: 512B notes_plat_sysinfo_400 = Clock Rate: 745 MHz notes_plat_sysinfo_405 = Execution Timeout: No notes_plat_sysinfo_410 = Integrated Device: No notes_plat_sysinfo_415 = Can Map Host Memory: Yes notes_plat_sysinfo_420 = Compute Mode: default notes_plat_sysinfo_425 = Concurrent Kernels: Yes notes_plat_sysinfo_430 = ECC Enabled: Yes notes_plat_sysinfo_435 = Memory Clock Rate: 3004 MHz notes_plat_sysinfo_440 = Memory Bus Width: 384 bits notes_plat_sysinfo_445 = L2 Cache Size: 1572864 bytes notes_plat_sysinfo_450 = Max Threads Per SMP: 2048 notes_plat_sysinfo_455 = Async Engines: 2 notes_plat_sysinfo_460 = Unified Addressing: Yes notes_plat_sysinfo_465 = Managed Memory: Yes notes_plat_sysinfo_470 = PGI Compiler Option: -ta=tesla:cc35 notes_os_form_000 = Stacksize set to 'unlimited' # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = https://www.spec.org/accel/flags/pgi2017_flags.20170621.00.xml hw_cpu_name = Intel Xeon E5-2698 v3 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3600 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 40 MB I+D on chip per chip hw_ocache = None hw_disk = 500 GB Seagate ST9500620NS 7200 RPM SATA hw_other = None hw_accel_model = Tesla K40 hw_accel_vendor = NVIDIA Corporation hw_accel_name = Tesla K40m hw_accel_type = GPU hw_accel_connect = PCIe hw_accel_ecc = Yes hw_accel_desc = See Notes sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 375.20 sw_compiler = PGI Professional Edition, Release 17.5 sw_file = xfs sw_state = Run level 3 (multi-user) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = None test_sponsor = NVIDIA Corporation license_num = 019 tester = NVIDIA Corporation hw_avail = Oct-2015 sw_avail = May-2017 prepared_by = colgrove (is never output, only tags rawfile) hw_vendor = Supermicro hw_model = SuperServer 1028GR-TR sw_parallel_other = No hw_nthreadspercore = 2 hw_ncoresperchip = 16 hw_ncores = 32 hw_nchips = 2 hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R) sw_os000 = CentOS Linux release 7.2.1511 (Core) sw_os001 = 3.10.0-327.22.2.el7.x86_64 notes_plat_sysinfo_000 = Sysinfo program /local/home/colgrove/SPECACCEL/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on hsw8 Wed May 10 13:11:00 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2698 v3 @ 2.30GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 64 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 16 notes_plat_sysinfo_080 = siblings : 32 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 notes_plat_sysinfo_095 = cache size : 40960 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264038532 kB notes_plat_sysinfo_115 = HugePages_Total: 20 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = centos-release: CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_155 = centos-release-upstream: Derived from Red Hat Enterprise Linux 7.2 (Source) notes_plat_sysinfo_160 = os-release: notes_plat_sysinfo_165 = NAME="CentOS Linux" notes_plat_sysinfo_170 = VERSION="7 (Core)" notes_plat_sysinfo_175 = ID="centos" notes_plat_sysinfo_180 = ID_LIKE="rhel fedora" notes_plat_sysinfo_185 = VERSION_ID="7" notes_plat_sysinfo_190 = PRETTY_NAME="CentOS Linux 7 (Core)" notes_plat_sysinfo_195 = ANSI_COLOR="0;31" notes_plat_sysinfo_200 = CPE_NAME="cpe:/o:centos:centos:7" notes_plat_sysinfo_205 = redhat-release: CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_210 = system-release: CentOS Linux release 7.2.1511 (Core) notes_plat_sysinfo_215 = system-release-cpe: cpe:/o:centos:centos:7 notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = uname -a: notes_plat_sysinfo_230 = Linux hsw8 3.10.0-327.22.2.el7.x86_64 #1 SMP Thu Jun 23 17:05:11 UTC 2016 notes_plat_sysinfo_235 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = run-level 3 May 10 10:51 notes_plat_sysinfo_250 = notes_plat_sysinfo_255 = SPEC is set to: /local/home/colgrove/SPECACCEL notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = /dev/mapper/centos-root xfs 443G 29G 414G 7% / notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_280 = notes_plat_sysinfo_285 = (End of data from sysinfo program) notes_plat_sysinfo_290 = Information from pgaccelinfo notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = CUDA Driver Version: 8000 notes_plat_sysinfo_305 = NVRM version: NVIDIA UNIX x86_64 Kernel Module 375.20 Tue Nov 15 16:49:10 PST 2016 notes_plat_sysinfo_310 = notes_plat_sysinfo_315 = Device Number: 0 notes_plat_sysinfo_320 = Device Name: Tesla K40m notes_plat_sysinfo_325 = Device Revision Number: 3.5 notes_plat_sysinfo_330 = Global Memory Size: 12029132800 notes_plat_sysinfo_335 = Number of Multiprocessors: 15 notes_plat_sysinfo_340 = Number of SP Cores: 2880 notes_plat_sysinfo_345 = Number of DP Cores: 960 notes_plat_sysinfo_350 = Concurrent Copy and Execution: Yes notes_plat_sysinfo_355 = Total Constant Memory: 65536 notes_plat_sysinfo_360 = Total Shared Memory per Block: 49152 notes_plat_sysinfo_365 = Registers per Block: 65536 notes_plat_sysinfo_370 = Warp Size: 32 notes_plat_sysinfo_375 = Maximum Threads per Block: 1024 notes_plat_sysinfo_380 = Maximum Block Dimensions: 1024, 1024, 64 notes_plat_sysinfo_385 = Maximum Grid Dimensions: 2147483647 x 65535 x 65535 notes_plat_sysinfo_390 = Maximum Memory Pitch: 2147483647B notes_plat_sysinfo_395 = Texture Alignment: 512B notes_plat_sysinfo_400 = Clock Rate: 745 MHz notes_plat_sysinfo_405 = Execution Timeout: No notes_plat_sysinfo_410 = Integrated Device: No notes_plat_sysinfo_415 = Can Map Host Memory: Yes notes_plat_sysinfo_420 = Compute Mode: default notes_plat_sysinfo_425 = Concurrent Kernels: Yes notes_plat_sysinfo_430 = ECC Enabled: Yes notes_plat_sysinfo_435 = Memory Clock Rate: 3004 MHz notes_plat_sysinfo_440 = Memory Bus Width: 384 bits notes_plat_sysinfo_445 = L2 Cache Size: 1572864 bytes notes_plat_sysinfo_450 = Max Threads Per SMP: 2048 notes_plat_sysinfo_455 = Async Engines: 2 notes_plat_sysinfo_460 = Unified Addressing: Yes notes_plat_sysinfo_465 = Managed Memory: Yes notes_plat_sysinfo_470 = PGI Compiler Option: -ta=tesla:cc35 notes_os_form_000 = Stacksize set to 'unlimited'