# Invocation command line: # /var/spool/alps/3693235/runspec --rebuild --reportable --config tesla-pgi142.cfg --flagsurl pgi2014_flags.xml openacc # output_root was not used for this run ############################################################################ #################################################################### # Tester information #################################################################### license_num = 3440A prepared_by = Huian Li tester = Indiana University test_sponsor = Indiana University ###################################################################### # The header section of the config file. Must appear # before any instances of "default=" # # ext = how the binaries you generated will be identified # tune = specify "base" or "peak" or "all" ext = pgi output_format = asc teeout = yes teerunout = yes #tune = base,peak tune = base #strict_rundir_verify = 0 #output_root = /local/home//SPECACCEL #################################################################### # HOST Hardware information #################################################################### default=default=default=default: hw_vendor = Cray hw_avail = Apr-2013 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3200 hw_cpu_char000 = AMD Turbo CORE Technology up to 3.2GHz, Turbo hw_cpu_char001 = CORE off hw_disk = Two 500 GB 7200 RPM 2.5" SAS hard drives, in RAID 1 mirror hw_fpu = Integrated hw_memory000 = 32 GB (4 x 8 GB 2Rx4 PC3L-12800R-11, ECC) hw_model = Cray XK7 hw_ncores = 16 hw_nchips = 2 hw_ncoresperchip = 16 hw_nthreadspercore = 1 hw_ncpuorder = 1 chip hw_other = None hw_ocache = None hw_pcache = 32 KB I + 16 KB D on chip per core hw_scache = 16 MB I+D on chip per chip, 2 MB shared / 2 cores hw_tcache = 16 MB I+D on chip per chip, 8 MB shared / 8 cores #################################################################### # Accelerator Hardware information #################################################################### hw_accel_connect = PCIe 2.0 16x hw_accel_desc000 = NVIDIA Tesla K20m GPU, 2496 CUDA cores, 706MHz, 5 hw_accel_desc001 = GB GDDR5 RAM hw_accel_ecc = yes hw_accel_model = Tesla K20 hw_accel_name = NVIDIA Tesla K20 hw_accel_type = GPU hw_accel_vendor = NVIDIA sw_accel_driver = 304.47.09-1_1.0401.835.0.0.gem #################################################################### # Power and temperature meter configuration #################################################################### power = no power_analyzer = 10.20.101.194:8888 temp_meter = 10.20.101.194:8889 mean_anyway = 1 voltage_range = auto idle_current_range = auto current_range = auto #################################################################### # Software information #################################################################### default=default=default=default: sw_file = NFSv3 (IBM N5500 NAS) over Gb ethernet sw_os000 = SUSE Linux Enterprise Server 11 (x86_64), Cray sw_os001 = Linux Environment 4.2 sw_os001 = Kernel 2.6.32.59-0.7.1_1.0401.6845-cray_gem_c sw_other = NVIDIA CUDA 5.5.20 sw_state = Multi-user, run level 3 sw_base_ptrsize = 64-bit sw_avail = Feb-2014 sw_compiler = PGI Accelerator Fortran/C/C++ Server, Release 14.3 sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 319.82 CC = pgcc CXX = pgc++ FC = pgfortran #openacc=default=default=default: #sw_other = FFTW 3.3.3 opencl=default=default=default: sw_other = CUDA 5.5 SDK openacc=base=default=default: OPTIMIZE = -fast -Mfprelaxed FOPTIMIZE = -acc -ta=tesla:cc35,cuda5.5 COPTIMIZE = -acc -ta=tesla:cc35,cuda5.5 openacc=peak=default=default: OPTIMIZE = -fast -Mfprelaxed FOPTIMIZE = -acc -ta=tesla:cc35,cuda5.5 COPTIMIZE = -acc -ta=tesla:cc35,cuda5.5 opencl=default=default=default: CPORTABILITY = -I/opt/cuda-5.5/include/ -lOpenCL CXXPORTABILITY = -I/opt/cuda-5.5/include/ -lOpenCL opencl=base=default=default: OPTIMIZE = -fast -Mfprelaxed opencl=peak=default=default: OPTIMIZE = -fast -Mfprelaxed 101.tpacf=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=1024 103.stencil=peak=default=default: basepeak=yes #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=0 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_1=0 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_2=0 104.lbm=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=32 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_1=1 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_2=1 110.fft=peak=default=default: basepeak = yes 112.spmv=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=96 114.mriq=peak=default=default: basepeak = yes #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=256 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_0=256 116.histo=peak=default=default: basepeak = yes #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=512 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_0=512 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_1=1 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_2_0=1024 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_3_0=512 117.bfs=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=64 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_0=64 118.cutcp=default=default=default: CPORTABILITY += -D__GNUC__ 118.cutcp=peak=default=default: basepeak = yes 120.kmeans=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=288 121.lavamd=peak=default=default: basepeak = yes #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=128 122.cfd=peak=default=default: #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=192 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_0=192 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_2_0=192 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_3_0=288 #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_4_0=192 123.nw=peak=default=default: basepeak=yes 124.hotspot=peak=default=default: basepeak=yes #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=16 125.lud=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=32 126.ge=peak=default=default: OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=512 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_0=1 OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_1_1=512 127.srad=peak=default=default: basepeak=yes #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=256 128.heartwall=peak=default=default: basepeak=yes #OPTIMIZE += -DSPEC_ACCEL_WG_SIZE_0_0=256 140.bplustree=peak=default=default: basepeak = yes 350.md=peak=default=default: FOPTIMIZE = -acc -ta=tesla:cc35,cuda5.5,maxregcount:48 351.palm=peak=default=default: PORTABILITY = -DSPEC_HOST_FFTW3 FOPTIMIZE = -acc=noautopar -ta=tesla:cc35,cuda5.5,fastmath -I/opt/fftw/3.3.0.4/interlagos/include LIBS = -L/opt/fftw/3.3.0.4/interlagos/lib -lfftw3 352.ep=peak=default=default: FOPTIMIZE = -acc -ta=tesla:cc35,llvm 359.miniGhost=peak=default=default: FOPTIMIZE = -acc -ta=tesla:cc35,cuda5.5,maxregcount:32 COPTIMIZE = -acc -ta=tesla:cc35,cuda5.5,maxregcount:32 359.miniGhost=default=default=default: EXTRA_LDFLAGS += -Mnomain 363.swim=peak=default=default: FOPTIMIZE = -acc -ta=tesla:cc35,cuda5.5,pin # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program /N/soft/mason/specaccel-1.0/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6874 $ $Date:: 2013-11-20 #$ 0953404ef7e75a5f9bbb534c6de3f831 notes_plat_sysinfo_010 = running on nid00696 Mon Aug 18 10:00:38 2014 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD Opteron(TM) Processor 6276 notes_plat_sysinfo_050 = 1 "physical id"s (chips) notes_plat_sysinfo_055 = 16 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 16 notes_plat_sysinfo_080 = siblings : 16 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_090 = cache size : 2048 KB notes_plat_sysinfo_095 = notes_plat_sysinfo_100 = From /proc/meminfo notes_plat_sysinfo_105 = MemTotal: 33084584 kB notes_plat_sysinfo_110 = HugePages_Total: 0 notes_plat_sysinfo_115 = Hugepagesize: 2048 kB notes_plat_sysinfo_120 = notes_plat_sysinfo_125 = /usr/bin/lsb_release -d notes_plat_sysinfo_130 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = From /etc/*release* /etc/*version* notes_plat_sysinfo_145 = SuSE-release: notes_plat_sysinfo_150 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_155 = VERSION = 11 notes_plat_sysinfo_160 = PATCHLEVEL = 1 notes_plat_sysinfo_165 = mazama-release: notes_plat_sysinfo_170 = Mazama Wed Aug 28 02:06:30 CDT 2013 on hssbld0 by bwdev notes_plat_sysinfo_175 = lsb-cray-mazama-7.1.0 notes_plat_sysinfo_180 = notes_plat_sysinfo_185 = uname -a: notes_plat_sysinfo_190 = Linux nid00696 2.6.32.59-0.7.1_1.0402.7496-cray_gem_c #1 SMP Wed Feb 26 notes_plat_sysinfo_195 = 05:58:57 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = notes_plat_sysinfo_210 = SPEC is set to: /N/soft/mason/specaccel-1.0 notes_plat_sysinfo_215 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_220 = /N/soft dvs 1.9T 1.6T 265G 86% /N/soft notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = (End of data from sysinfo program) hw_cpu_name = AMD Opteron 6276 hw_disk = None hw_nchips = 1 prepared_by = huili (is never output, only tags rawfile) sw_file = NFSv3 (IBM N5500 NAS) over Gb ethernet sw_os002 = SUSE Linux Enterprise Server 11 (x86_64) sw_os003 = 2.6.32.59-0.7.1_1.0402.7496-cray_gem_c sw_state = Multi-user, run level 3 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = http://www.spec.org/accel/flags/pgi2014_flags.xml sw_peak_ptrsize = Not Applicable